With outback fire raptor has been successful, it has a power supply and if you shut the inverter or use the button either will shut off the RSD. This is all it is no optimizer, no data, no bypass for shade just RSD. Jerry
On Fri, Aug 27, 2021, 8:48 AM James Jarvis <j...@aprsworld.com> wrote: > So who has a good reliable off grid RSD? It all looks like failure prone > garbage to me. > > Thank you, > > -James Jefferson Jarvis > APRS World, LLC > +1-507-454-2727 > > (Sent from my phone. My apologies for spelling errors and brevity.) > > On Fri, Aug 27, 2021, 05:02 Tump <t...@swnl.net> wrote: > >> I would once again say that; we as an industry can influence not only the >> writing of the code but with what we are *buying* OR *not buying.* >> If the devices we are required to install to make things “more safe & >> reliable”, at the cost of our livelihoods & reputations, we all need to >> make the folks that are building the RSD crap and those who require >> installation of questionably safe & reliable crap aware of these problems. >> WE can thru either going to the code development meetings AND NOT buying >> or installing this stuff. Not too easy when a huge amount of solar is >> rooftop installs. As many of the installers in the NE know its not a single >> level ranch were installing this stuff on, short season & man lift required. >> Tell your supplier why you are not buying that brand, let your supplier >> & folks on the list what manufacture has good reliable products AND tech >> support that we can understand, who we can get in a timely fashion, and get >> the satisfaction of a prompt replacement. IF we don’t sell it they won’t >> have a job or a market. >> >> On Aug 26, 2021, at 2:09 PM, Jeremy Coxon <jco...@sunwindpowerinc.com> >> wrote: >> >> Carl, >> >> Did you get any kind of joy out of APSmart on that failure? >> >> I will say that their tech support guy did at least try to be helpful, >> but the language barrier was really really steep and their distribution >> channels are less than ideal. Their response to a request for compensation >> was that they would not be profitable if they had to pay for truck rolls >> for such a low cost item. I really don’t think they GET IT. We’ve been in >> business for over 16yrs and this one failure could easily have ended that >> run. >> >> I cannot imagine we’re alone here. I was told by AP that their failure >> rate was 0.2%. Now, I come from a reliability engineering background in >> petro chemical/ big pharma where a 0.2% failure rate would be >> catastrophic. Can you imagine that 2 out of every 1000 pills made could >> cause death? We engineered secondary systems and multiple quality checks >> to contain catastrophic consequences for components that had know failure >> rates higher than acceptable values. A simple solution to this fire >> initiation issue would be a metal enclosure instead of plastic casing. >> That still doesn’t really solve the problem of extra connections though. >> >> Best Regards, >> Jeremy Coxon NABCEP # 091308-21 >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> >> *tump3...@gmail.com <3...@gmail.com>* *www.SWNL.net* >> Solarwinds Northernlights >> * Serving Mid Coast Maine & Northern California* >> * 207-832-7574 Cl. >> 610-517-8401 * >> *Blair "TUMP" May* >> >> >> * ******** MAINE'S CHARTER ******** * * >> NABCEP "Certified PV Installer"* >> >> >> * ******** MAINE'S CHARTER ******** ** >> Trace Xantrex "Certified" Dealer / Installer"* >> >> >> >> >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: RE-wrenches@lists.re-wrenches.org >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: RE-wrenches@lists.re-wrenches.org > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
