RE: Tiny Bubbles

[Shane Clays]

I will try the silicone. There are threaded ends on the barbs, and I did put
tape on em. Lots of it. 

Thanks,
Shane

        -----Original Message-----
        From:   [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
        Sent:   Tuesday, April 03, 2001 9:18 AM
        To:     [EMAIL PROTECTED]
        Subject:        Re: Tiny Bubbles

        Try a silicone ring around the tube in place.  If it's leaking there
that 
        should seal it up!  Let me know if that works?  Are there any
threaded ends 
        on the hose barbs?  And, did you put a goodly amount of Teflon tape
on them?
        jeff
        ________________________________________

        LEAVING THE LIST
        ================
        To stop receiving messages you will need to send a message to
[EMAIL PROTECTED]  with a command to remove you from the list.
The list manager  controls who belongs to the list.  

        For example:
         --------------------------------------------------------------
               From: John Doe <[EMAIL PROTECTED]>
                 To: [EMAIL PROTECTED]
            Subject: <not needed>

            UNSUBSCRIBE
         --------------------------------------------------------------
________________________________________

LEAVING THE LIST
================
To stop receiving messages you will need to send a message to  
[EMAIL PROTECTED]  with a command to remove you from the list.  The list 
manager  controls who belongs to the list.  

For example:
 --------------------------------------------------------------
       From: John Doe <[EMAIL PROTECTED]>
         To: [EMAIL PROTECTED]
    Subject: <not needed>

    UNSUBSCRIBE
 --------------------------------------------------------------