I don't think so. I think I used all new parts. However that is a good
suggestion, and I will need to check all my pieces closely and make sure
none of them are from old stuff. I did silicone all my connections for the
input yesterday and as of last night, I did not see any difference. I also
put a new splitter on, and instead of using the T for the reduction I used a
+ shaped adapter to reduce 3 - 1 inch ouputs to half inch. Still no
difference. It is getting sort of frustrating!
Thanks,
Shane
-----Original Message-----
From: Jerry Porter [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, April 03, 2001 5:02 PM
To: [EMAIL PROTECTED]
Subject: Re: Tiny Bubbles
Did you by chance have to cut old tubing off any of the barbs - If
so you
could have scored the barb with the knife which would have left a
small cut
on the barb that would allow a small amount of air in.
jp
----- Original Message -----
From: "Shane Clays" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 03, 2001 8:03 AM
Subject: RE: Tiny Bubbles
> It is a 1 inch input into the pump. I use a PVC barb fitting and
about 6
> inches of 1 inch stiff flex tube that hooks to a barb fitting on
the pump.
I
> use a hose clamp on each fitting. What can I do to ensure that it
is all
> sealed up?? Should I pull the hoses off and use silicone on the
barb
> fittings then clamp it back down, or does anyone have any other
suggestions?
>
> Thanks,
> Shane
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, April 03, 2001 8:52 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Tiny Bubbles
>
> On the suction side of the pump it will pull in air from any tiny
> leak. On
> the pressure side it will spray water!
> jeff
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
> [EMAIL PROTECTED] with a command to remove you from
the
list.
> The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from
the list.
The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list.
The list manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
