ok, so as the coral is really big i will put it over a 6" pvc pipe 1" over the sand. But i assume the pvc tube must be smaller than the coral right? because i won�t find any pvc big enough so the coral can "fit". i like the idea of the coral fitting in the rock hole, but mine will never fit in any rock i have, but i will cut a little ring and place it in the sand and above the coral.
-----Original Message----- From: Shane Clays [mailto:[EMAIL PROTECTED]] Sent: Martes, 02 de Octubre de 2001 06:01 p.m. To: '[EMAIL PROTECTED]' Subject: RE: open brain coral That is true. Another option is to place the skeleton of the coral in a short piece of PVC and then place that on the substrate. the coral will be comfortable with that set up, and you can then move it if neccesary, and it will allow the coral to be a bit above the substrate which will allow it to open nicely, and will make it harder for your fish to annoy it. Just make sure the PVC is large enough in diameter that the coral fits nicely into it, but that the PVC does not rest on the flesh of the coral. I actually put my open brain in a piece of rock (it had a nice hole in it) and the coral has since attached itself into this rock. I can now move the rock along with the coral if neccesary. He opens up and drapes down over the rock and it looks very nice. Agreed though, the bottom of the tank is the best way to go. IMO, Shane C. > -----Original Message----- > From: [EMAIL PROTECTED] [SMTP:[EMAIL PROTECTED]] > Sent: Tuesday, October 02, 2001 4:45 PM > To: [EMAIL PROTECTED] > Subject: Re: open brain coral > > Open brain corals should be placed on the substrate with the majority of > the > skeleton burried in the substrate. When fully expanded you shouldnt see > any > of the skeleton. Putting him at the top of your tank will cause him to > bleach > even further. > ________________________________________ > > LEAVING THE LIST > ================ > To stop receiving messages you will need to send a message to > [EMAIL PROTECTED] with a command to remove you from the > list. The list manager controls who belongs to the list. > > For example: > -------------------------------------------------------------- > From: John Doe <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: <not needed> > > UNSUBSCRIBE > -------------------------------------------------------------- ________________________________________ LEAVING THE LIST ================ To stop receiving messages you will need to send a message to [EMAIL PROTECTED] with a command to remove you from the list. The list manager controls who belongs to the list. For example: -------------------------------------------------------------- From: John Doe <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: <not needed> UNSUBSCRIBE -------------------------------------------------------------- ________________________________________ LEAVING THE LIST ===============To stop receiving messages you will need to send a message to [EMAIL PROTECTED] with a command to remove you from the list. The list manager controls who belongs to the list. For example: -------------------------------------------------------------- From: John Doe <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: <not needed> UNSUBSCRIBE --------------------------------------------------------------
