well I didn't can the stuff. I still have all of it.. however there is someone that has claimed the oscillator and the exciter. and I am going keep the loband pa. thought it might be fun for 6 meters. however I have the card slots, the cards, and some data box thing (no clue what it is). not to sure what to do with the receiver. might make a good 900 mhz control receiver. Dave KF6WJA
----- Original Message ----- From: "Neil McKie" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, December 16, 2003 9:44 PM Subject: Re: [Repeater-Builder] Micor Delay Line Oh gosh ... I was in your area a few weeks ago. If I had known you were trying to get rid of the PURC station, I would have been interested in adding it to my collection. I came back here with the truck half loaded ... or was that half empty ... ? Neil - WA6KLA Dave Stephens wrote: > > well it WAS a micor PURC. it HAD a 900 MHZ receiver, all the > simulcast stuff, a 300 watt Loband transmitter, card racks and so > on... HOWEVER it came in a really nice cabinet (like new) so I > gutted it out and right now im packing it with GE's :-P. > Dave KF6WJA > PS.. thanks for the info there everyone. > > ----- Original Message ----- > From: "Jeff DePolo WN3A" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, December 16, 2003 10:10 AM > Subject: RE: [Repeater-Builder] Micor Delay Line > > Just in case you aren't aware, if the Micor came with an Allen Avionics > delay unit, chances are it was a Micor PURC station built for paging. > Longshot, it could have been a simulcast voice repeater, but those are > extremely rare. If, in fact, it's a PURC, it has a different backplane and > a few different cards in the shelf. If you can get your hands on a PURC > manual (it's a supplement manual, like the Micor control shelf "orange > book"), it will make the conversion go much easier. I have a lot of Micor > PURC's and have converted several to standard repeater use; once you > understand the idiosyncracies between the PURC and the standard Micor RT, > it's no big deal, but without the book, you'll spend a lot of time chasing > down traces on the backplane... > > --- Jeff > --------- > Jeff DePolo WN3A > Broadcast and Communications Consultant > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, December 16, 2003 6:50 AM > > To: [email protected] > > Subject: Re: [Repeater-Builder] Micor Delay Line > > > > > > For a check to cover to cover shipping,I will sell the one I > > have. I am working on "trying" to convert a Micor Compa > > station into a UHF repeater and it came with the delay brick. > > > > Contact me directly off-list, > > > > Joe > > N1EZO/8 > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > To visit your group on the web, go to: > > http://groups.yahoo.com/group/Repeater-> Builder/ > > > > To > > unsubscribe from this group, send an email to: > > [EMAIL PROTECTED] > > > > Your use of Yahoo! Groups is subject to: > > http://docs.yahoo.com/info/terms/ > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
