I would suggest contacting anyone in your area of the country who happens to 'collect' various Micor station parts. Any time someone decides to part out a Micor Station, sooner or later a board will be surplused.
Neil Joe LaGanga wrote: > > Does anyone know of a source for the back planes? > > Thank you > Joe > > > I find television very educating. Every time somebody turns on the > set, I go into the other room and read a book. > > -- Groucho Marx, 1890-1977 > > -----Original Message----- > From: Neil McKie [mailto:[EMAIL PROTECTED] > Sent: Tuesday, December 16, 2003 1:27 PM > To: [email protected] > Subject: Re: [Repeater-Builder] Micor Delay Line > > Best thing to do is get the backplane (motherboard) that is used > on the more standard Micor Base station and repeater. Life is much > simpler that way. > > Neil McKie - WA6KLA > > Jeff DePolo WN3A wrote: > > > > Just in case you aren't aware, if the Micor came with an Allen > > Avionics delay unit, chances are it was a Micor PURC station built > > for paging. Longshot, it could have been a simulcast voice repeater, > > but those are extremely rare. If, in fact, it's a PURC, it has a > > different backplane and a few different cards in the shelf. If you > > can get your hands on a PURC manual (it's a supplement manual, like > > the Micor control shelf "orange book"), it will make the conversion > > go much easier. I have a lot of Micor PURC's and have converted > > several to standard repeater use; once you understand the > > idiosyncracies between the PURC and the standard Micor RT, it's no > > big deal, but without the book, you'll spend a lot of time chasing > > down traces on the backplane... > > > > --- Jeff > > --------- > > Jeff DePolo WN3A > > Broadcast and Communications Consultant > > > > > -----Original Message----- > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > > Sent: Tuesday, December 16, 2003 6:50 AM > > > To: [email protected] > > > Subject: Re: [Repeater-Builder] Micor Delay Line > > > > > > > > > For a check to cover to cover shipping,I will sell the one I > > > have. I am working on "trying" to convert a Micor Compa > > > station into a UHF repeater and it came with the delay brick. > > > > > > Contact me directly off-list, > > > > > > Joe > > > N1EZO/8 > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
