Best thing to do is get the backplane (motherboard) that is used on the more standard Micor Base station and repeater. Life is much simpler that way.
Neil McKie - WA6KLA Jeff DePolo WN3A wrote: > > Just in case you aren't aware, if the Micor came with an Allen > Avionics delay unit, chances are it was a Micor PURC station built > for paging. Longshot, it could have been a simulcast voice repeater, > but those are extremely rare. If, in fact, it's a PURC, it has a > different backplane and a few different cards in the shelf. If you > can get your hands on a PURC manual (it's a supplement manual, like > the Micor control shelf "orange book"), it will make the conversion > go much easier. I have a lot of Micor PURC's and have converted > several to standard repeater use; once you understand the > idiosyncracies between the PURC and the standard Micor RT, it's no > big deal, but without the book, you'll spend a lot of time chasing > down traces on the backplane... > > --- Jeff > --------- > Jeff DePolo WN3A > Broadcast and Communications Consultant > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, December 16, 2003 6:50 AM > > To: [email protected] > > Subject: Re: [Repeater-Builder] Micor Delay Line > > > > > > For a check to cover to cover shipping,I will sell the one I > > have. I am working on "trying" to convert a Micor Compa > > station into a UHF repeater and it came with the delay brick. > > > > Contact me directly off-list, > > > > Joe > > N1EZO/8 > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
