Having a time window during which the first DTMF digit must be received is a clever idea (as long as no one sits on their mic :). I think you could implement that by starting user timers when the receiver goes active and using those timers to change the muting and access mode for the DTMF decoder (commands 005 and 007 on the RLC-3/4/Club).
Steve At 12:37 PM 12/17/2003 -0800, you wrote: >A friend's wife had a voice that would false the repeater controller >regularly. The system was configured to mute the audio for 3/4 >second on every decode. He owned the repeater so it was easy to >try various solutions (the controller involved was a homebrew Z80 >based implementation). The solution he ended up with was to enable >the touchtone decoder starting at 1.5 seconds into every received >signal and only for 3 to 4 seconds. If the decoder saw a valid digit >it would stay enabled, otherwise it stayed offline for the rest of the >received signal. This mod was only implemented on the 2m input - the >440 control input stayed "normal" > >The thinking behind this modification took advantage of the protocol >that was used on that repeater: if you were going to command the >system you would key down, give your callsign and say and start >punching buttons. The only side effect of having this "window" was >that is you wanted to do a second string of digits you had to unkey >and rekey. > >Just an idea... Worked for them.... > >Mike WA6ILQ > >At 08:45 AM 12/17/03 -0700, you wrote: > >>You can speed up the DTMF decoders by changing some resistor values >>if you really want to, but it will come at the expense of increased voice >>falsing (when the DTMF decoder thinks it is hearing a digit when it is really >>just someone talking). If you have the controller set to mute DTMF digits, >>that will probably become an annoyance. You can find a lot more information >>about the subject at <http://www.link-comm.com/faq/dtmf_voice_falsing.txt>. >> >>Steve >> >> >>At 07:56 PM 12/16/2003 -0500, you wrote: >> >Has anyone gotten and RLC-4 or 2a controller to accept high speed touch >>tones?? I have an encoder capable of well over 20 digits per second, but I >>plan >>to stick to about 15 digits/s. I would like to use this for control since >>I do not >>mute DTMF on the output. >> > >> >James >> >>--- >>Steve Strobel WWW: http://www.link-comm.com >>Link Communications, Inc. Phone: (406) 245-5002 ext 102 >>MailTo:[EMAIL PROTECTED] Fax: (406) 245-4889 > > > > > > >Yahoo! Groups Links > >To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > >To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > >Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ --- Steve Strobel WWW: http://www.link-comm.com Link Communications, Inc. Phone: (406) 245-5002 ext 102 MailTo:[EMAIL PROTECTED] Fax: (406) 245-4889 Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
