This would be a very useful and productive construction project that could be put on the Repeater Builder web site. Maybe there are others out there that could supply info for the other repeater bands.
Chuck WB2EDV ----- Original Message ----- From: "Eric Lemmon" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, January 22, 2004 9:48 PM Subject: Re: [Repeater-Builder] Z-Matcher > Chuck, > > An excellent idea! All that's inside one of these little gems is a Pi > network, so it would not be a big deal. I plan to measure the > components inside a Telewave VHF matcher when I swap out a repeater that > uses one, but that will be in a month or two... Perhaps some photos of > the guts will be useful... > > 73, Eric Lemmon WB6FLY > > Chuck Kelsey wrote: > > > > Seems with all the talk on here about the benefits of using an impedance matcher at the repeater's transmitter output, someone could come up with some construction information for the group. > > > > > > Yahoo! Groups Links > > To visit your group on the web, go to: > http://groups.yahoo.com/group/Repeater-Builder/ > > To unsubscribe from this group, send an email to: > [EMAIL PROTECTED] > > Your use of Yahoo! Groups is subject to: > http://docs.yahoo.com/info/terms/ > > > Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
