Re: [Repeater-Builder] Z-Matcher

[Chuck Kelsey]

I think I stated "all the repeater bands."   At least 10, 6, 2, 220, 440, 902, 1.2.   Chuck WB2EDV     ----- Original Message ----- From: Mike Pugh To: Repeater-Builder@yahoogroups.com Sent: Friday, January 23, 2004 7:42 AM Subject: Re: [Repeater-Builder] Z-Matcher Don't forget the UHF band, and while you're at it, 900 Mhz would be a nice thing to have as well. (Sure don't want much, do I?) 73 Mike KA4MKG Eric Lemmon wrote: Chuck, An excellent idea! All that's inside one of these little gems is a Pi network, so it would not be a big deal. I plan to measure the components inside a Telewave VHF matcher when I swap out a repeater that uses one, but that will be in a month or two... Perhaps some photos of the guts will be useful... 73, Eric Lemmon WB6FLY Chuck Kelsey wrote: Seems with all the talk on here about the benefits of using an impedance matcher at the repeater's transmitter output, someone could come up with some construction information for the group. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.