You will be rewarded when its up and on the air! I have over 1,000 man/hours
in my machines and they look and sound like it...73
----- Original Message -----
From: "Russell Filling" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, March 15, 2004 10:09 PM
Subject: Re: [Repeater-Builder] M pro Ge deskmate
> ya i got it , it was dc and its throwing 742 voilts but i think i
> found the reason for no out put , dead but glowing 8156 and 8106
> , the thing im worried about is that 8072 being bad , in finding
that
> the cabinate was dropped 8 inches on a concrete deck , im pretty mad
> but i think the damage is done so im gonna retube it if i can find
those
> 3 , net searches tell me im gonna spend between 85 -185 for a
> 8072 and 15 -18 for a 8156 , and 9 -11 for a 8106 tube , kinda
> heartbreaking considering its in operation at 2 watts right now at
> l;east the transistors are good :) im trying to find the hpaainess in
> the whole deal , that ive put many man hrs in this from getting it
> getting crystals ,then the controller , then the antenna , then the
> feedline ,and then finally building the outboard keying circuit to
> get it all working , and now dead tubes , but hey its a commercial rig
and
> at least 30 yrs old , so its off for a parts hunt now !!!!!!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
