We are using Ringo Antennas for both Commercial and 
Amateur Applications right now, they work just 
fine for us. 

Have you ever measured the bandwidth of the Comet or 
Diamond Antennas? 

Most (of at least the Multiband) Antennas are quite narrow 
in bandwidth and don't make the entire 440-450 Amateur 
band with usable reflected power values. They are also not 
nearly as hardy in construction. 

The Hustler Dual Band antenna I measured a month ago 
would not be commercially usable for a repeater site. 

Like the Comet/Diamond Multiband the bandwidth was 
to small and non adjustable. The mono band Hustlers 
are quite nice, I've just installed a new pair to 
replace a high preformance commercial antenna array 
and they actually out preform the original Decibel 
commercial antenna system.

The Hustler mono band Antennas are quite hardy, I don't 
have a problem installing them at commercial repeater 
sites.  I no longer install most of the Comet and 
Diamond antennas, the high winds blow and shake them 
into failure mode within a few years. A large bird 
flew into one 1296 Comet I had up and broke it off 
at the base (never did find the bird...)  If you live 
where the wind doesn't blow hard, they will probably 
hold up well for some years. 

The proof is in the overall preformance. Ringos remain 
good preformers for some of my commercial and Amateur 
applications.

cheers
skipp 
www.radiowrench.com 

> Eric Harrison <[EMAIL PROTECTED]> wrote:
> Stay away from the Ringo's for Repeater use! This was
> a poor choice of antenna! I would highly recomend
> looking at the Dimmond products. I have had very good
> luck using them on repeaters. Besides you get more
> peformance form them than a Hustler g144-6. 
> 
> 73's and good luck!
> 
> Eric (N7JYS)





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
     [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


Reply via email to