Power cycle everything. My bet is it's the microprocessor gone stupid.

Chuck

WB2EDV



----- Original Message ----- 
From: "Coy Hilton" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, June 10, 2004 6:04 AM
Subject: [Repeater-Builder] Re: stuck repeater


> Look at the Transister that actually keys the transmitter sounds 
> like it might be shorted.
> 73
> AC0Y
> 
> 
> 
> --- In [email protected], "rtoplus" <[EMAIL PROTECTED]> 
> wrote:
> > Greetings from NC at 2:45AM
> > 
> > After arising at about 2:00 AM for a nature call, I noticed on my 
> > scanner, an un-modulated signal.  I turned on the lights in the 
> > house to check the channel on the scanner.  Damnit, it's my 2 
> meter 
> > repeater!  I don't know how long its been keyed up cause I've been 
> > sleeping (not anymore tonight).  I attempted to disable the 
> > controler (zetron model 37) and got all the right response codes 
> but 
> > the repeater is still chugging right along.  It has a 3 minute 
> > timeout timer set on the controller and the morse ID is set for 10 
> > minutes.  Its been about 45 minutes since I've been up and no ID 
> and 
> > no timeout.  I'm not sure if the repeater (msr2000) has the stock 
> > timeout timer card still installed or not, I can't remember.  
> There 
> > is nothing I can do at this hour as the repeater is a business 
> > rooftop installation with no access until 10:00AM.  My thoughts 
> are 
> > that my controller went south cause I can key the repeater and 
> hear 
> > the courtesy beep when I unkey but I still get no morse ID and 
> also 
> > I also totally reset the controller to the factory defaults and 
> the 
> > repeater still stays keyed.  I'm surprised my PA hasn't burned up 
> > yet...intermittant duty set at about 55 watts.  Any thoughts from 
> > you folks at what other things I might look for in the AM?
> > 
> > 
> > Thanks a bunch
> > 
> > Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
     [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/
 


Reply via email to