My suggestion would be to get a telephone line controller that will answer an incoming call at your site, then you can disable the repeater via the phone line until you can get access.
A company called B&L Electronics in Ottawa, Ill sells these devices. John VE3AMZ. ----- Original Message ----- From: "rtoplus" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, June 10, 2004 3:01 AM Subject: [Repeater-Builder] stuck repeater | Greetings from NC at 2:45AM | | After arising at about 2:00 AM for a nature call, I noticed on my | scanner, an un-modulated signal. I turned on the lights in the | house to check the channel on the scanner. Damnit, it's my 2 meter | repeater! I don't know how long its been keyed up cause I've been | sleeping (not anymore tonight). I attempted to disable the | controler (zetron model 37) and got all the right response codes but | the repeater is still chugging right along. It has a 3 minute | timeout timer set on the controller and the morse ID is set for 10 | minutes. Its been about 45 minutes since I've been up and no ID and | no timeout. I'm not sure if the repeater (msr2000) has the stock | timeout timer card still installed or not, I can't remember. There | is nothing I can do at this hour as the repeater is a business | rooftop installation with no access until 10:00AM. My thoughts are | that my controller went south cause I can key the repeater and hear | the courtesy beep when I unkey but I still get no morse ID and also | I also totally reset the controller to the factory defaults and the | repeater still stays keyed. I'm surprised my PA hasn't burned up | yet...intermittant duty set at about 55 watts. Any thoughts from | you folks at what other things I might look for in the AM? | | | Thanks a bunch | | Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892 | | | | | | | Yahoo! Groups Links | | | | | Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/

