Look at the Transister that actually keys the transmitter sounds like it might be shorted. 73 AC0Y
--- In [email protected], "rtoplus" <[EMAIL PROTECTED]> wrote: > Greetings from NC at 2:45AM > > After arising at about 2:00 AM for a nature call, I noticed on my > scanner, an un-modulated signal. I turned on the lights in the > house to check the channel on the scanner. Damnit, it's my 2 meter > repeater! I don't know how long its been keyed up cause I've been > sleeping (not anymore tonight). I attempted to disable the > controler (zetron model 37) and got all the right response codes but > the repeater is still chugging right along. It has a 3 minute > timeout timer set on the controller and the morse ID is set for 10 > minutes. Its been about 45 minutes since I've been up and no ID and > no timeout. I'm not sure if the repeater (msr2000) has the stock > timeout timer card still installed or not, I can't remember. There > is nothing I can do at this hour as the repeater is a business > rooftop installation with no access until 10:00AM. My thoughts are > that my controller went south cause I can key the repeater and hear > the courtesy beep when I unkey but I still get no morse ID and also > I also totally reset the controller to the factory defaults and the > repeater still stays keyed. I'm surprised my PA hasn't burned up > yet...intermittant duty set at about 55 watts. Any thoughts from > you folks at what other things I might look for in the AM? > > > Thanks a bunch > > Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892 Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/

