Let me snip some of this out, for my next question.... But, I >>AM<< keying a Motorola repeater (an MSR2000) so, do I need a Tone or DC control card to key the station, or can I get PTT off the Line Driver card?
-----Original Message----- From: skipp025 [mailto:[EMAIL PROTECTED] Sent: Thursday, June 10, 2004 2:05 PM To: [email protected] Subject: [Repeater-Builder] Re: SpectraTAC comparator questions > "n9wys" <[EMAIL PROTECTED]> wrote: > > Other status tone options were available > > when the tx & function control system was > > tone keyed. Leakage through the system might > > cause problems if the 2175 status tone was > > able to provide low level tx guard tone, ie > > keep the transmitter keyed. > > OK, so because I'm not using a tone-keyed > system, it really makes no > difference which status tone I use, correct? Correct. In reality, you would disable the tone key function and use a/the form C relay or what ever hard logic outputs from control shelf. The tone key system is not used in your application unless you're keying a Mot repeater/base. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
