If you want to do by the factory design.
You will need an F1-PL and Guard Tone Detector
in the MSR. If you want to use (and most do) the
MSR repeater receiver, you'll need the spectra
tac line driver module in the MSR.
The above in addition to the normal base/repeater
cards used in the msr.
The Spectra Tac Shelf should have the tone keying
configuration in place.
Otherwise, yes... you could do it with hard
wired logic, but it's a bit more work.
cheers
skipp
> "N9WYS" <[EMAIL PROTECTED]> wrote:
> Let me snip some of this out, for my next question....
>
> But, I >>AM<< keying a Motorola repeater (an MSR2000) so, do I need
a
> Tone or DC control card to key the station, or can I get PTT off the
> Line Driver card?
>
eater/base.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
