Tom,
I'm not sure of the exact model number... but I do
have a ham band designed and spec'd decibel UHF dual
2-section 408 antenna. The model with two 408's
stacked and it's a real nice monster.
Do you need the measurements for the harness
or some other item spec?
I'd sell it, but shipping would be expensive,
so a pickup in Northern CA would be the most
practical answer. Email me direct if you're
interested.
cheers,
skipp
skipp025 at yahoo.com
---- Original Message -----
> From: "tgundo2003"
> To:
> Sent: Tuesday, October 05, 2004 11:43 PM
> Subject: [Repeater-Builder] Help in locating a
> DB-408 for the ham band
> >
> > As per recommendations on this group I have settled
> > on a DB-408 for my new UHF repeater project. My problem
> > is I keep running into dead ends in locating one, new
> > or used, to buy cut for the ham band. I talked to Andrews
> > to see if I could persuade them to build me a one-
> > off for 440 but hey wouldn't. Can anyone help me out
> > before I have to settle for a "stick" antenna? I have also
> > looked at the Maxrad open dipole model which I can get
> > for 440, but it seems like a bad deal, its as much as a
> > DB-408 new. The Sinclair is just too much $$ for th
> > budget. I want to get this project done before it gets
> > really cold here in Chicago. Please feel free to contact
> > me off the list with any
> > info you may have.
> > [EMAIL PROTECTED]
> >
> > Thanks!!!
> >
> > Tom
> > W9SRV
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
