Where in northern California?
Reno is about 7 hours from here ...
Neil
skipp025 wrote:
>
> Tom,
>
> I'm not sure of the exact model number... but I do
> have a ham band designed and spec'd decibel UHF dual
> 2-section 408 antenna. The model with two 408's
> stacked and it's a real nice monster.
>
> Do you need the measurements for the harness
> or some other item spec?
>
> I'd sell it, but shipping would be expensive,
> so a pickup in Northern CA would be the most
> practical answer. Email me direct if you're
> interested.
>
> cheers,
> skipp
> skipp025 at yahoo.com
>
> ---- Original Message -----
> > From: "tgundo2003"
> > To:
> > Sent: Tuesday, October 05, 2004 11:43 PM
> > Subject: [Repeater-Builder] Help in locating a
> > DB-408 for the ham band
> > >
> > > As per recommendations on this group I have settled
> > > on a DB-408 for my new UHF repeater project. My problem
> > > is I keep running into dead ends in locating one, new
> > > or used, to buy cut for the ham band. I talked to Andrews
> > > to see if I could persuade them to build me a one-
> > > off for 440 but hey wouldn't. Can anyone help me out
> > > before I have to settle for a "stick" antenna? I have also
> > > looked at the Maxrad open dipole model which I can get
> > > for 440, but it seems like a bad deal, its as much as a
> > > DB-408 new. The Sinclair is just too much $$ for th
> > > budget. I want to get this project done before it gets
> > > really cold here in Chicago. Please feel free to contact
> > > me off the list with any
> > > info you may have.
> > > [EMAIL PROTECTED]
> > >
> > > Thanks!!!
> > >
> > > Tom
> > > W9SRV
>
>
> Yahoo! Groups Links
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
