Skipp, Huh! I am in Sacramento right now for the Pacific Bantam Austin Club car show and meet running through Saturday in Old Sacramento Riverfront park or something like that. Yes, it seems all my hobbies are expensive!
What repeaters are in the area, I have 2 meters and 440 available. Paul WB5IDM -----Original Message----- From: skipp025 [mailto:[EMAIL PROTECTED] Sent: Wednesday, October 06, 2004 4:08 PM To: [email protected] Subject: [Repeater-Builder] Re: Help in locating a DB-408 for the ham band Metro Sacramento because you've never heard of Elmira California. skipp www.radiowrench.com > Neil McKie <[EMAIL PROTECTED]> wrote: > > Where in northern California? > > Reno is about 7 hours from here ... > > Neil > > skipp025 wrote: > > > > Tom, > > > > I'm not sure of the exact model number... but I do > > have a ham band designed and spec'd decibel UHF dual > > 2-section 408 antenna. The model with two 408's > > stacked and it's a real nice monster. > > > > Do you need the measurements for the harness > > or some other item spec? > > > > I'd sell it, but shipping would be expensive, > > so a pickup in Northern CA would be the most > > practical answer. Email me direct if you're > > interested. > > > > cheers, > > skipp > > skipp025 at yahoo.com > > > > ---- Original Message ----- > > > From: "tgundo2003" > > > To: > > > Sent: Tuesday, October 05, 2004 11:43 PM > > > Subject: [Repeater-Builder] Help in locating a > > > DB-408 for the ham band > > > > > > > > As per recommendations on this group I have settled > > > > on a DB-408 for my new UHF repeater project. My problem > > > > is I keep running into dead ends in locating one, new > > > > or used, to buy cut for the ham band. I talked to Andrews > > > > to see if I could persuade them to build me a one- > > > > off for 440 but hey wouldn't. Can anyone help me out > > > > before I have to settle for a "stick" antenna? I have also > > > > looked at the Maxrad open dipole model which I can get > > > > for 440, but it seems like a bad deal, its as much as a > > > > DB-408 new. The Sinclair is just too much $$ for th > > > > budget. I want to get this project done before it gets > > > > really cold here in Chicago. Please feel free to contact > > > > me off the list with any > > > > info you may have. > > > > [EMAIL PROTECTED] > > > > > > > > Thanks!!! > > > > > > > > Tom > > > > W9SRV > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
