w9mwq wrote:
>
> I had something brought to my attention yesterday on my 2 meter
> repeater. ABout 15 miles away, I'm being told that my repeater can
> be heard on the output for about 20 to 25 Khz away. From what I am
> told, it is not legitable, but it's there. The transmitter is a
> Majorrie Hi-Pro running about 2.5 watts and the PA is a Vocom 200
> Watts. I'm getting right about 165 watts out of the duplexer, fed
> through 7/8" hardline 160' to the top of the tower into a Diamond
> Dual Band Antenna with a vsr of 1.1 with 1/10 of watt reflected. Is
> this normal, or is there a problem.
>
> Mathew
YES! There is a BIIIIG problem! This tells me you have the deviation
cranked up WAAAY to high, and since maggiore's have such poor transmit
audio circuits, it's REAL easy for that to happen.
Most equipment can be setup easily with a simple deviation meter, but
maggiore, spectrum, hamtronics, and a few others, need to be verified
with a deviation SCOPE on a service monitor, to watch for excessive peaks.
I've seen a maggiore show about +/-6 Khz on the meter (still too high),
but had peaks out around +/-15-20 Khz on the scope!
I suspect the problem is high-frequency rolloff/limiting?
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/