Bernd Maestling wrote:
> Hello Ed,
>
> after replacing the capacitor and the resistor I now have
> a lock and I can tune it to 10 volts.
> When I measure near the VCO unit my counter shows a solid
> 386.7875MHz signal.
>
> This time I programmed 2 eproms, one BIN and one HEX.
> Only the BIN worked.
>
> An now, after I realized why I received no signal from
> my RF-generator (I replaced the Dummy-Load cable with the
> one from the generator, hi) I can make the receiver tuning.
>
> Thank you very much Ed, you are a professional !
>
> 73
> Bernd
Bernd,
Glad it worked for you. Let us know what sensitivity you end up with and
how much tuning range is left at 431.
Ed Yoho
WA6RQD
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
