The topic of batteries has come up several times lately. I know that I
have questions like a few others do. What I would like to ask is if
you have a repeater on solar and or wind power, would you let the
rest of us know what you are using to charge the batteries, what
type of charge controller, what type of batteries and how the
batteries are working for you.
I am using two 100aH UPS batteries (ordering two more), a single
110 watt solar panel (will order one more this summer) and will be
adding a homebrew wind generator. The one panel does not keep
the batteries charged, so I have turned off the repeater for the
winter. The solar controller that I am using now is the MorningStar
SS-10L (will be using a homebrew when I add the other panel and
wind generator). This is my first repeater off the power grid. Have
had a lot of advise given, both good and conflicting.
My first question: are UPS batteries good to use for this application
or should I be using some other type and why? As it is time to buy
more batteries to get ready for this spring to finnish the project.
Be patient with us beginners, we are still learning and making
mistakes. I for one do not have deep pockets; but I have two
repeaters and I am not a club. A thank you goes to each one of you
for your advise.
Rod
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/