On Sat, 19 Feb Joerg Bergmann wrote:
> We cannot follow this suggestion. We have checked about 10
> examples of (partially complicated, 10 phases) quant analysis.
> Of course, the R values are larger, for example:
> Rietveld: Rexp=6% Rwp 8%
> DDM: Rexp=25% Rwp 30%
I already wrote that DDM-R values can not be DIRECTLY compared with
Rietveld-R values. Moreover, the absolute value of R-factor can not be
used as a self-sufficient criterion of the quality of results for both
Rietveld and DDM methods.
What formulae did you use when calculating DDM-R-values? Did you use
equation 7 from the DDM-article (J. Appl. Cryst. (2004) 743) or another
variant? Did you calculate Rietveld-R values after the background
subtraction or not?
Even disregarding the above questions, you have got the ratio
DDM-Rwp/Rexp=1.2 smaller than the Rietveld-Rwp/Rexp=1.33.
> The errors following statistical error propagation are somewhat
> larger than for normal Rietveld. But, trying standard
> mixtures with known content, the differences between known
> and measured weight contents are at least twice larger.
I did not understand - with which method did you get twice larger than
known contents: with Rietveld or with DDM?
> Maybe, DDM is of some advantage in structure refinement.
> In quant analysis, we cannot recomment DDM, at least
> with BGMNs fundamental parameter profiles.
I do not see any principal difference between the structural and
quant-analysis in terms of profile-fitting.
> Maybe, it has some advantages for older Rietveld programs with
> classical UVW profile shapes. As we have observed,
> the DDM method is insensitive for wrong "tails" on the
> peaks, they become background. These tails are a problem
> with common UVW etc. profile shapes in Rietveld analysis.
With this I can partly agree, except that the programs using UVW are
old.
One more important point is that DDM results depend on the choice of
the convolution intervals for calculating derivatives. As far as I
heard from Joerg Bergmann, in the current version of BGMN the DDM
intervals are fixed to the minimal value of 5 data-points. This is,
definitely, not the best choice - it may work well only in rare cases.
In the DDM-article (J. Appl. Cryst. (2004) 743) I recommended flexible
intervals chosen on the basis of the counting statistics. This variant
is used in the DDM program and it gives most optimal results for
various datasets.
Best,
Leonid Solovyov
__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail