Hi, > Okay. Wait a second. What do you mean by "pinging works" when you say > you don't get a response? Good question. I think the problem may be that eth1 is not up. If you are right wbout it not being up at the end of my scrip. I assume ifconfig puts it up after assigning the IP address. That works in other scripts I use. But I will try to use ifconfig eth1 up explicitly.
> Also I don't know what EML is. Ethercat master library. No IP address needed for this. > Your loading script is okay, except for the following points: > - you don't need the cards= parameter in your scenario. I understand, but I will soon on another machine. > - why don't you give rteth0 an IP?? EML that is ethercat does not require this. > - eth1 is not "up" in the end. Is that wanted? I assume so. I also assumed it WAS up. Will have to check. > > I highly suspect either a routing problem (check your routes, both RT > and noRT) What do you mean by checking routes? My knowledge of ethernet is a bit too sketchy to know what to do with this suggestion. > or a socket problem. If it is any help, I do get a socket handle from the code. Does this mean anything? On the rt side then. Does whatever program you try open > sockets with INADDRANY on the clientside? Sorry latin or greek to me. What does this mean? > >> Of course there is a chance that I connect to the incorrect NICS but >> extensive musical chairs has not given much joy either. :) > > well since you only have one realtek card, that one definitely is rteth0. It certainly is eth0 before I bring it down. Thanks for the time. Roland > > CU Fabian Koch > TabascoEye > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Splunk Inc. > Still grepping through log files to find problems? Stop. > Now Search log events and configuration files using AJAX and a browser. > Download your FREE copy of Splunk now >> http://get.splunk.com/ > _______________________________________________ > RTnet-users mailing list > RTnet-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/rtnet-users > ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
