Good morning:
I need your help. I am having real problems getting coverage with
my paint. Attached is a photo of my model. (This same photo is found
in the photo album 'Thorin' in our S-Scale group.)
The center of the frame and the cab side show my problem. This is after
priming and then two coats. I am plagued by brush marks and the paint
does not level. You can see the bottle of Polly Scale paint I am using.
I also often have 'corner' problems which hides details. At the right
end of the frame you can see dry, pooled paint around the white block.
At the left end I have a dry pool I got when I airbrushed the primer.
(Model Master white primer airbrushed directly from the bottle -- no
thinning and NO FUMES.)
I use Polly Scale because of fumes. I paint inside with normal house
ventilation. I like to brush because it is QUIET. I hate the noise of
my airbrush and its pump. Often the only time I can paint is after the
children have gone to bed.
What am I doing wrong? I love using a brush. Do I have the wrong
brush? Do I need to 'prep the paint'?
Thank you, experts, for your help and advice.
Thorin
<<2008_MG_Paint 004.jpg>> <<2008_MG_Paint 002.jpg>>
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
