> From: Frank Sergent
> To: scaler164@...
> My 3D printer problems
> have prevented me from making much progress on the latest S scale design and
> I was considering just biting the bullet at going to a diecast S scale
> coupler much like the HO scale couplers. This requires a lot more capital,
> so I need to be sure the pay back is there (even if it will take a while).
S scale may not be dead, but in looking at the results of the age poll, most of
its practitioners will be within 20 years or so. I could use about 100 couplers
myself, but I couldn't in good faith recommend that he make any heavy
investment in an S coupler.
David Thompson
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
