<<
I already have the Scalecoat 1 B&O blue paint. Would a coat of Floquil primer
on
the urethane car seal it so I can use the Scalecoat 1 on it? Has anyone else
done this?
Thank You,
Bill Lane
>>
Would there be a problem using Scalecoat on urethane? I don't think it would
cause a problem, but you might test it on a scrap. If you have a grit blaster,
I'd use a fine media to make sure that the urethane was free of any mold
release
and that the model being painted had a little "tooth" for the paint to adhere
to.
Jack Wyatt
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
