Hi, Bill,

Thank you so much for the photos as they really show the detail parts that I 
will need to replace.  I guess that I will be giving Fred another call to see 
what he has available.  By chance, do you know whom might have that style of 
headlight?  Thanks again.

Keith Erhart

Hi Keith -- 

The 4-4-2 I have is one of the inside bearing trailing axle versions. If you 
don’t have one of these, the details might have been different, but here are a 
few shots. I can see that someday I will have to center the number plate! I 
have already all but remade the loco -- new motor, rewired, fixed the gearbox, 
set up the suspension (trued up the trailing axle bearing), different tender, 
and extended the cab roof. I still have to renumber it and maybe add a couple 
more details, then clear coat both loco and the tender to match (I also have to 
renumber the tender-- it came from an Omnicon 4-6-0 which now has a USRA 
tender. Another photo). 

Yes, lots of newspaper is ready to go under the work on the dining room table! 

Good luck! 
Bill Winans 
--------------------------------- 

You better put down some newspaper so you don't scratch or get paint on your 
dining table! 

I am curious about the smoke box area on the boiler of your SWM 4-4-2. I 
purchased one that had some detail parts removed. There are a few holes on the 
sides and front of the smoke box. I talked with Fred Rouse for ideas and 
ordered some parts to install before I repaint the smoke box. Could you take a 
close-up photo of the front of the boiler and one of the sides of the smoke box 
to verify the details? Thank you. 

Keith Erhart 





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/S-Scale/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/S-Scale/join
    (Yahoo! ID required)

<*> To change settings via email:
    [email protected] 
    [email protected]

<*> To unsubscribe from this group, send an email to:
    [email protected]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Reply via email to