RE: [SA-list] V4 and MSN

[Etherington, Darrell]

Agreed, unfortunately not an option within this company but thanks anyway.   -----Original Message----- From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]] Sent: 19 February 2003 19:32 To: [EMAIL PROTECTED] Subject: RE: [SA-list] V4 and MSN   From a security point of view you need to open the port in the OUTGOING way only (most firewalls will understand that's normal that on an established connection going from the network to the internet an answer comes). You can still use a proxy (http/socks) to receive the messages. So that's not much of a security issue then.(TCP port 1863)     dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Etherington, Darrell Sent: Wed Feb 19 8:22 PM To: '[EMAIL PROTECTED]' Subject: RE: [SA-list] V4 and MSN Dirk,   Ok, thanks for the info, this is a pity as it would be a useful feature as many of our tech guys have MSN on their mobiles which is a bit more flexible than SMS.  I have checked and there is no way we can compromise security and open up the firewall for MSN so I guess we'll have to wait until a version of SA supports MSN over a proxy.   Are their any plug-ins you know of that might enable us to do this in any other way?   Darrell.     -----Original Message----- From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]] Sent: 19 February 2003 18:26 To: [EMAIL PROTECTED] Subject: RE: [SA-list] V4 and MSN   With only support direct MSN sending, not via a proxy.  And we do not plan on adding it in the near future.     dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Etherington, Darrell Sent: Wed Feb 19 6:35 PM To: '[EMAIL PROTECTED]' Subject: RE: [SA-list] V4 and MSN Dirk,   I've upgraded to this but as I expected it has made no difference.   The issue must be the Proxy settings as I did a few tests and MSN is blocked from direct outside access unless going via Proxy.  Is there no way around this? I suspect this will be the issue within most large companies regarding MSN due to the security issue.  The default to was set in the setup but I had over-ridden this within my checks anyway so the addresses were correct.   Darrell.     -----Original Message----- From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]] Sent: 19 February 2003 16:33 To: [EMAIL PROTECTED] Subject: RE: [SA-list] V4 and MSN   Update to 4.0.1308 and retest.  With only have MSN via a direct connection, not via a proxy. It's the DEFAULT TO in the MSN SETUP.       dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Etherington, Darrell Sent: Wed Feb 19 5:31 PM To: '[EMAIL PROTECTED]' Subject: RE: [SA-list] V4 and MSN Hi Dirk,   SA Version 4.0.1302   In default setup a username and password have been specified and it is ticked as enabled, I have checked these directly through messenger and they work ok   Which default timeout, do you mean? I assume the one on the alerts page which in this case is a PING and is set to 5, can't find any time out values on the MSN setup page   If MSN requires a Proxy, is this picked up from the settings within SA's proxy settings page? Assumed it was so these have been set too for proxy and port required by MSN.   Darrell.   "This email and any files transmitted with it are confidential and are intended solely for the use of the individual or entity to whom they are addressed. This communication represents the originator's personal views and opinions, which do not necessarily reflect those of CP Ships. If you are not the intended recipient or the person responsible for delivering the email to the intended recipient, be advised that you have received this email in error, and that any use, dissemination, forward, printing, or copying of this email is strictly prohibited. If you received this email in error, please immediately notify the CP Ships Help Desk on +44 (0) 1293 582800"