RE: [SA-list] Missing UI

Fri, 12 Aug 2005 07:31:39 -0700

    No.  The telephony service is set to Manual.  As far as I know, it has NEVER been set to run, and Servers Alive used to work.  I don’t believe that there is any kind of a modem card in that machine.

 

    At any rate, I attempted to start the Telephony service and after a delay, I got:

Error 1503: Service did not respond to start or control request in a timely fashion.

 

    I also checked the event logs and see that at about the time I restarted the server, there is an entry in the Application Log that states:

Hanging application serversalive.exe, version 5.0.0.1748, hang module hungapp, version 0.0.0.0, hang address 0x00000000

 

    Any further suggestions?

 

    Thanks for all you help.

 

                                Mike

 

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Passow
Sent: Friday, August 12, 2005 9:15 AM
To: [email protected]
Subject: Re: [SA-list] Missing UI

 

Is teh telephony service running?

Dunigan, Michael wrote: 

    I am not making much headway on this.  I tried stopping the process
and restarting it with the exe.  When it showed back up in the Task
list, there still was no User Interface.  So at that point, I restarted
the server.  When it came back up, I had the same situation.  I stopped
the process and went to the Control Panel.  The service was flagged to
allow desktop interaction and I attempted to start the service.  After a
short delay, Windows reported that it could not start the service.
Grrrrrr....
 
    Any further suggestions?  Do I have to reinstall ServersAlive?  If
so can someone confirm which configuration file(s) I want to keep before
wiping out the install directory or overlaying the installation
directory.
 
    Thanks, Mike
 
 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On
Behalf Of Jason Passow
Sent: Friday, August 12, 2005 8:37 AM
To: [email protected]
Subject: Re: [SA-list] Missing UI
 
There are two options in the services control panel you can change it to
 
start automatically and tell it to use desktop interaction.  That will 
give access to the gui on the console.  Or just end the process and 
start it again by launching the executable.   Could have been an 
explorer crash which made all of the application icons in the systray 
disappear. 
 
Dunigan, Michael wrote:
 
  


Morning (at least here),
 
   While I was on vacation, a junior admin messed with my server
    



(don't
  



get me started on this...) that is running Servers Alive and now the
User Interface screen does not show.  When I bring up the Task List, it
shows ServersAlive in the Process list.  When I look at the Services
Control Panel, it shows ServersAlive set to Manual.  I believe that
ServersAlive is being started via an entry in the StartUp group, so
    



that
  



the User Interface displays on the console of the server.
 
   What do I change to get the User Interface to display again?
 
   Thanks for you help.
 
                       Mike
 
 
Michael J. Dunigan
Office of the Registrar, University of Michigan
(734) 647-3633
MDunigan at umich dot edu
 
 
 
-------------------------
 
[This E-mail scanned for viruses by Declude Virus]
 
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
  unsubscribe SAlive
 
 
 
    



 
  











-- 
Jason Passow
Mississippi Welders Supply
[EMAIL PROTECTED]
ph: (507) 494-5178
fax: (507) 454-8104
 
"If you do everything right, nobody will realize you've done anything at all."
------------------------- [This E-mail scanned for viruses by Declude Virus] To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive

Reply via email to