reopen 493745
found 493745 1.0.19-17
thanks
On Fri, Aug 08, 2008 at 07:46:29PM +0200, Julien BLACHE wrote:
Wolfgang [EMAIL PROTECTED] wrote:
Hi,
just disabled standalone daemon. Only running from inetd.
Good :)
Can you quickly check, whether you get this error too when standalone
At 1218812561 time_t, Christoph Franzen wrote:
the machine is set up and connected to the internet. Most of the things
you need should already be installed. The system resides on a mirrored
RAID Volume on the DAC960 with LVM. There are two additional disks for
testing purposes.
It's perfect,
Package: libtool-doc
Version: 2.2.2-1
Severity: normal
Tags: experimental
Hello,
With libtool-doc from experimental, info libtool does not work
anymore. It brings up the shortened manual page instead of the info
pages.
Regards,
-- System Information:
Debian Release: lenny/sid
APT
On Wed, Jul 23, 2008 at 04:10:58PM +0400, Dmitry E. Oboukhov wrote:
Package: perl
Version: 5.10.0-10
Tags: l10n
Severity: important
In attache You can found pod with russian symbols in utf-8 charset.
This file is showed incorrectly:
X1
perldoc actually runs pod2man in the
Package: uswsusp
Version: 0.8-1.1
Severity: wishlist
Tags: l10n patch
Russian debconf templates translation update is attached.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-2-amd64 (SMP
On 2008-07-02 20:39 +0200, Josh Triplett wrote:
The initramfs scripts cannot handle a label containing '/'.
Same here, with the label being /. :-(
For example, if I boot with root=LABEL=/alt-root , I get a message
saying the initramfs could not find /dev/disk/by-label//alt-root .
Hm, I
Subject: deborphan: typo in changelog
Package: deborphan
Version: 1.7.26
Severity: minor
*** Please type your report below this line ***
Dear DDs,
just to make Debian even more perfect.
s/is/it/
Thanks,
Paul
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT
Please immediately click on the following hyperlink to verify
your email address and activate your website on ViralClassified.com
When you click this link, you will see a page with some exciting
information about how you can get even more value out of your
membership.
On Wed, Aug 13, 2008 at 07:54:00PM +0300, Martin Michlmayr wrote:
/usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct
manconv: can't set the locale; make sure $LC_* and $LANG are correct
manconv: can't set the locale; make sure $LC_* and $LANG are correct
manconv: can't
Package: exiftran
Version: 2.07-1
Severity: wishlist
Currently exiftran called with -ai causes the rotated image to be marked
with the current modification date. It would be very useful if exiftran
could preserve the original modification date. (I know that I can look
at the EXIF data, but this
On Sun, Aug 17, 2008 at 00:16:49 +0200 (+0200), Jérémy Bobbio wrote:
Could you check your dest/MANIFEST.udebs file to see which version of
rootskel you have built in the initrd?
I grabbed the netboot images from
http://www.debian.org/devel/debian-installer/ on Friday 15th August, I
then
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
tag 495235 patch pending
thanks
Actually fixed this in svn a little while ago...
On the other hand, the tomcat5.5 install/init.d scripts do not search
the openjdk path for a valid jdk, and so tomcat cannot be started, and
so the postinst script
On Sun, Aug 17, 2008 at 05:54:07AM +0900, Morita Sho wrote:
Package: iceweasel
Version: 3.0.1-1
Severity: normal
Hi,
I noticed that some automatic language detection code written in JavaScript
won't work (mis-determines my language) on Iceweasel. Such script uses the
value of
2008/8/14 Christian Perrier [EMAIL PROTECTED]:
Dear maintainer of sympa and Debian translators,
[EMAIL PROTECTED]:/tmp$ LANG=C podebconf-display-po templates.pot
Template #10 in /tmp/6FrrfQ1GYx has a duplicate field choices with
new value Ident-based, dummy2. Probably two templates are not
Package: iceweasel
Version: 3.0.1-1
Severity: normal
When browsing flash sites iceweasel crashes npviewer.bin as follows:
(npviewer.bin:3348): Gdk-WARNING **: GdkWindow 0x300024b unexpectedly destroyed
(npviewer.bin:3348): Gdk-WARNING **: GdkWindow 0x300024a unexpectedly destroyed
On Tue, Aug 05, 2008 at 11:15:20PM +0200, Raphael Champeimont (Almacha) wrote:
Julien Cristau wrote:
On Tue, Aug 5, 2008 at 23:01:12 +0200, Raphael Champeimont (Almacha) wrote:
In fact I have no experience at all in the debian way of building
packages. Should I apply this patch to the
Hello guys,
I finally decided to take a quick look this morning and I found the
culprit.
It was caused by *dead code* probably left in place by from previous upstream.
I removed it, and now it works as expected in any gcc -O? mode.
I'm preparing a new upstream release and will push it back to
On Sun, Aug 17, 2008 at 08:28:31AM +0100, Adrian Bridgett wrote:
On Sun, Aug 17, 2008 at 00:16:49 +0200 (+0200), Jérémy Bobbio wrote:
Could you check your dest/MANIFEST.udebs file to see which version of
rootskel you have built in the initrd?
I grabbed the netboot images from
At 1218959576 time_t, Julien Danjou wrote:
I finally decided to take a quick look this morning and I found the
culprit.
It was caused by *dead code* probably left in place by from previous upstream.
I removed it, and now it works as expected in any gcc -O? mode.
If people are interested I've
Hi Gregory
On Sat, Aug 16, 2008 at 10:59:32PM +0200, Gregory Colpart wrote:
Hello,
On Sun, Aug 10, 2008 at 12:52:07PM +0200, Gregory Colpart wrote:
On Sun, Aug 10, 2008 at 12:31:32PM +0200, Ola Lundqvist wrote:
Ok, good. I was not aware of that. Should I contact the release team or
Am Samstag, 16. August 2008 16:08:15 schrieb Steve M. Robbins:
On Sat, Aug 16, 2008 at 10:29:47AM +0200, Erik Thiele wrote:
Note that Boost 1.34.1 is the old version of Boost. Version 1.35 is
packaged for Debian, and Boost 1.36 was recently released (Debian
packages are in progress).
This
On Sun, Aug 17, 2008 at 10:04:57 +0200 (+0200), Jérémy Bobbio wrote:
You could you please look if you see anything wrong in the syslog.
Eventually, you can add set -x to:
* /var/lib/dpkg/info/di-utils-reboot.postinst
* /lib/debian-installer/exit
* /lib/debian-installer/exit-command
I
Package: rtorrent
Version: 0.7.9-2+b2
Severity: wishlist
When disk space becomes low, rtorrent becomes inactive. It would be
better to continue to download data into already created files in this
instance, rather than just stopping (the files are already occupying
their full disk space and
Package: wnpp
Severity: wishlist
Owner: Debian Forensics [EMAIL PROTECTED]
* Package name: AESKeyFinder
Version : 1.0.0
* URL : http://citp.princeton.edu/memory/code/
* License : BSD
Programming Lang: C
Description : A tool for finding and repairing AES
Package: wnpp
Severity: wishlist
Owner: Debian Forensics [EMAIL PROTECTED]
* Package name: RSAKeyFinder
Version : 1.0.0
* URL : http://citp.princeton.edu/memory/code/
* License : BSD
Programming Lang: C++
Description : A tool for locating RSA private and
Package: wnpp
Severity: wishlist
Owner: Debian Forensics [EMAIL PROTECTED]
* Package name: AESFix
Version : 1.0.1
* URL : http://citp.princeton.edu/memory/code/
* License : BSD
Programming Lang: C++
Description : A tool for correcting bit errors in an AES
Package: installation-reports
Severity: normal
-- Package-specific info:
Boot method: network
Image version:
http://ftp.nl.debian.org/debian/dists/testing/main/installer-i386/current/images/netboot/netboot.tar.gz
Date: lenny beta2 release
Machine: FUJITSU SIEMENS LIFEBOOK E4010
Partitions:
Actually, the solution is that postgresql-plperl-8.1 needs to be
re-built for 5.10.
That is not possible, because postgresql-plperl-8.1 is part of etch.
What is in perl-base that libperl needs anyway?
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble?
The upstream author email me this
Which version of GtkSpell do you have installed? Is your system
locale set to Russian? It's detecting all the Russian phrases as
being misspelt, which they would be unless your system locale is
Russian.
Please can you write this information at upstream
On 08/17/2008 04:30 PM, Mike Hommey wrote:
On Sun, Aug 17, 2008 at 05:54:07AM +0900, Morita Sho wrote:
Please consider to put a following line to /etc/iceweasel/pref/iceweasel.js.
pref(general.useragent.locale, chrome://global/locale/intl.properties);
Note:
Olivier Berger [EMAIL PROTECTED] wrote:
Hi,
Well... but that currently prevents completing sane-utils upgrade on my
host.
Did you enable saned in standalone mode when prompted?
If yes, you're banging your head against the wall and then complaining
that it hurts. Learn not to do that.
JB.
On sam, 2008-08-16 at 22:33 +0200, Jan Capek wrote:
The contents of these arrays differs depending on whether the
instance of the xkb plugin comes from a the actual startup of the
entire
xfce4 environment or if I RESTART xfce4panel.
Could you try to save your session without saving, or
The upstream author email me this
What version of GtkSpell do you have installed? This sounds like a
GtkSpell bug, with it somehow not refreshing the highlighting when
the text area is cleared.
Please can you write this information at upstream bug tracker?
In
Package: wnpp
Severity: wishlist
Owner: Jacob Appelbaum [EMAIL PROTECTED]
* Package name: biosmemimage
Version : 1.0.0
* URL : http://citp.princeton.edu/memory/code/
* License : BSD
Programming Lang: C
Description : Tools for capturing memory dumps on x86
Package: initramfs-tools
Version: 0.85i
Severity: important
update-initramfs from Etch'n'Half fails for me due to a bug in line 247:
UdGate1:~# awk '/boot/{if (match($4, /ro/) $2 == /boot) print ro}'
/proc/mounts
ro
$_xms = (off)
In dosemu.conf makes dosemu working.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: fakeroot-ng
Version: 0.12-1
Severity: grave
Justification: renders package unusable
It just stopped working! (it was working last month)
even harmless binaries refuse to run.
[EMAIL PROTECTED]:/tmp$ fakeroot -l log /bin/true
Killed
[EMAIL PROTECTED]:/tmp$ cat log
Debugger started
I think the problem is in (at least, other places possible):
clients/tools/common.c:1371
...
tool_bind()
...
if ( ldap_result( ld, msgid, LDAP_MSG_ALL, NULL, result ) == -1 ) {
where ldap_result is called with timeout=NULL ie infinite, regardless of
passed arg.
--
paolo
Julien BLACHE [EMAIL PROTECTED] writes:
Olivier Berger [EMAIL PROTECTED] wrote:
Hi,
Well... but that currently prevents completing sane-utils upgrade on my
host.
Did you enable saned in standalone mode when prompted?
It previously worked, I upgraded and wasn't prompted, and it won't end
Package: xfce4-mailwatch-plugin
Version: 1.0.1-2+b1
Severity: wishlist
When the mailwatch-plugin looks for mails in an IMAP folder, those mails lose
the status new. Since the plugin does not show me the mails, it would be nice
to have an option so that mailwatch leaves all mails as new.
--
Package: audacious
Version: 1.5.1-3
Severity: normal
*** Please type your report below this line ***
Hi. Very often, when I right-click on a track in the Playlist Editor,
and select View Track Details (or hit Ctrl+I), the track info window
doesn't come up.
In this case I have to restart
Package: totem-plugins
Version: 2.22.2-3
Severity: important
Totem Youtube plugin does not work. When I try to search any video from
Youtube it fails and Totem outputs this error to terminal window:
** (totem:5226): DEBUG: Init of Python module
** (totem:5226): DEBUG: Registering Python plugin
Package: paraview
Version: 3.2.2-1
Severity: wishlist
Hi,
I just removed vtk and was surprsied that paraview wasn't removed by
dependencies. It seems paraview uses its own internal copy of VTK.
Any chance of using the packaged vtk package instead?
Thanks
Thomas
-- System
Package: wnpp
Severity: wishlist
Owner: Olivier Berger [EMAIL PROTECTED]
* Package name: twiki-caslogincontrib
Upstream Author : Charlie Reitsma
* URL : http://twiki.org/cgi-bin/view/Plugins/CasLoginContrib
* License : GPL
Programming Lang: Perl
Description :
Package: wnpp
Severity: wishlist
Owner: Olivier Berger [EMAIL PROTECTED]
* Package name: libauthcas-perl
Version : 1.3.1
Upstream Author : Olivier Salaün
* URL : http://search.cpan.org/~osalaun/AuthCAS/
* License : Perl (Artistic and GPL)
Programming Lang:
On dim, 2008-08-17 at 11:34 +0200, Stephan Windmüller wrote:
When the mailwatch-plugin looks for mails in an IMAP folder, those
mails lose
the status new. Since the plugin does not show me the mails, it
would be nice
to have an option so that mailwatch leaves all mails as new.
I don't get
Another problem I noticed is that something (not sure whether m-a or
comedi) uses depmod when building comedi-modules. module-init-tools
(which contains depmod) is not pulled in by any dependency. Please
investigate, and if it is comedi which needs depmod, we'll need to add
a dependency on
On Sat, Aug 16, 2008 at 07:59:20PM -0700, Vagrant Cascadian wrote:
cmd[i++] = ;;
+cmd[i++] = exec;
+cmd[i++] = sh;
cmd[i++] = kill;
cmd[i++] = -1;
cmd[i++] = $PPID;
no probably about it, in my tests, it definitely solved the issue.
because it uses
Brice Goglin wrote:
The patch has been committed in the upstream git repo on the master and
2.4 branch, so you can test it by building according to:
http://bgoglin.livejournal.com/10936.html
Make sure you use the 'xf86-video-intel-2.4-branch' branch since
the master branch won't compile
Hi,
I have the same problem. -profile option won't work.
/usr/bin/iceweasel script prepend file:// to every argument except
an argument for options listed in following:
case ${arg} in
-a | --display | -contentLocale | -UILocale | -remote | --debugger |
-height | -width | -chrome |
reassign 492889 freebsd-buildutils
reassign 306203 freebsd-buildutils
reassign 476263 freebsd-buildutils
reassign 436857 freebsd-buildutils
thanks
The freebsd5-buildutils package has been removed from Debian testing, unstable
and
experimental. I am reassigning its bugs to the freebsd-buildutils
Olivier Berger [EMAIL PROTECTED] wrote:
Hi,
Did you enable saned in standalone mode when prompted?
It previously worked, I upgraded and wasn't prompted, and it won't end
the upgrade process.
Either you were prompted with the question, in which case you answered
it at some point in time, or
* Dirk Eddelbuettel [EMAIL PROTECTED] [2008-08-16 18:53]:
On 17 August 2008 at 00:45, Rafael Laboissiere wrote:
| * Dirk Eddelbuettel [EMAIL PROTECTED] [2008-08-16 17:04]:
|
| And for that matter, I disagree with your handwaving statement that ess
and
| noweb maintainers need to sort
Package: mpc
Version: 0.12.1-1
Severity: important
On an IPv6 enabled host that runs mpd locally mpc will report a connection
error if MPD_HOST is not defined and addrinfo list returned by getaddrinfo()
contains more than 1 item.
Here is the error:
Nelson A. de Oliveira wrote:
Steps that I do to reproduce this error is:
- orphaner -a
- Go to cdw
- Select it
- OK
- It exits with E: Couldn't find package cdw
I tried to reproduce it on Sid (dpkg was not up to date, but this should
not make a difference) and failed.
orphaner is failing
On Sun, Aug 17, 2008 at 12:15:33PM +0800, Chris wrote:
This is fixed in v1.1.2 and v1.2.0beta3.
Cristiano Greco could you please update the Debian package?
Christian Ohm Thanks for the report and the patch.
As I can see, you only fixed src/qtorrenthandle.cpp, but what about the
change
On Sun, Aug 17, 2008 at 09:38:13AM +0100, Adrian Bridgett wrote:
On Sun, Aug 17, 2008 at 09:31:15 +0100 (+0100), Adrian Bridgett wrote:
This seems to have broken completely on the recent 2.1~rc9-2 upload.
oops - that's be why -3 exists then!
* debian/rules: run ./configure with path to
On Sun, Aug 17, 2008 at 08:08:40AM +0300, Cristi wrote:
hello,
it seems the 'ifconfig' path problem is valid for 'route' command too.
I have a configuration where the server pushes some static routes to the
client upon connecting.
After connecting, the 'route add -net x.y.z.t' command
On Sun, 17. Aug 2008, Yves-Alexis Perez wrote:
I don't get it. You're saying that, with an IMAP configured in mailwatch
plugin, each time the plugin check the mails it only sees the new ones
since the last time it checked? Because I sure cant reproduce.
No, this would be a bug, not a feature.
Daniel Moerner wrote:
In /etc/laptop-mode/conf.d/hal-polling.conf, the comments state that the
default is to Disable HAL polling on battery and Enable HAL polling on
AC. The default value for HAL polling on AC is:
AC_DISABLE_HAL_POLLING=1
Either this or the comment should be changed to
# Automatically generated email from bts, devscripts version 2.10.29~bpo40+1
#
# deborphan (1.7.27) unstable; urgency=low
#
# * Fix some typos in debian/changelog, thanks to Paul Menzel.
#(Closes: #495413)
#
package deborphan
tags 495413 + pending
--
To UNSUBSCRIBE, email to [EMAIL
Hi,
recently pekwm 0.1.7 has been released at www.pekwm.org
Please consider packaging this new release, because the debian package is
getting horribly out of date.
Thanks.
--
hiding.out at gmail.com
Hi,
thanks for fixing this bug. Do you plan to ask for a freeze exception
for mutt-patched?
Thomas
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Soenke wrote:
Hi Bart,
thanks for the quick reply.
H. These events are actually hardware dependent, and if the new
battery does not send them, there's not much you can do about it except
perhaps polling.
I was afraid that this might be the case. I checked again with acpid in
Package: lintian
Version: 1.24.3
Severity: normal
Tags: patch
Hi,
Lintian reports missing-dep-for-interpreter for many OCaml-related packages:
http://lintian.debian.org/tags/missing-dep-for-interpreter.html
This is because packages that need ocamlrun usually depend on a
virtual package
On Sat, Aug 16, 2008, Jerry Quinn wrote:
I'm not sure if this is the right place to report it, but every gtk-based
app I run spits out this message:
[EMAIL PROTECTED]:~$ gnome-terminal
Gtk-Message: Failed to load module gnomebreakpad: libgnomebreakpad.so:
cannot open shared object file: No
On Fri, Aug 15, 2008 at 05:45:52PM +0200, Frank S. Thomas wrote:
I think it would also be nice if wnpp-alert could sort packages by popcon
score so that developers know which packages are more worth adopting.
Anyone interested in creating infrastructure to bring popcon data into
a system and
On Wednesday 30 July 2008 09:12:28 Julien Cristau wrote:
On Tue, Jul 29, 2008 at 23:49:02 +0300, Peter Eisentraut wrote:
Is this example obsolete? Is there something else that might mess up the
keyboard configuration? Any clue? Thanks.
Yes, that's a bug in the X server. As I understand
Hi Gregory,
* Gregory Colpart [EMAIL PROTECTED] [2008-08-17 13:20]:
The package horde3 has a vulnerability (See CVE-2008-3330 and
#492578).
I prepared fixed package for etch version (source package and
debdiff):
http://gcolpart.evolix.net/debian/horde3/horde3_3.1.3-4etch4.dsc
Package: roundcube-pgsql
Version: 0.1.1-7
Severity: minor
roundcube-{{pg,my}sql,sqlite}'s short descriptions refer to them as
virtual packages instead of metapackages. A virtual package is one that
is provided by a real one.
Cheers,
Julien
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hi!
For the protocol: The source.list file was allright, switching to aptitude let
the problem disapear.
Maybe you want to emphasize the use of aptitude on the web site...
regards
matthias
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
tags 493899 + pending confirmed
Thanks
Hi,
the bug is confirmed. The patch [1] to reopen console if zero length byte is
read, breaks directfb. It fails in the usual case, but works when run through
strace.
we'll try to update the patch to fix issue. Otherwise, we'll remove it.
cheers,
Hi Bart,
thanks for the hint, but I do not think that this is related. I already
changed the power.sh script to look at the sysfs interface some time ago
(sorry, forgot to send it in as a patch). When a battery event is
caught, everything works as it should. It just seems my battery is only
very
Hi,
Op Tue 12 Aug 2008 om 04:24:07 +0200 schreef Sven Joachim:
On 2008-08-11 23:25 +0200, Daniel Baumann wrote:
what is the status of this ITA? I'm actually depending much on that
package, so I'm interested it is maintained in Debian.
snip
Anyway I have now uploaded symlinks 1.2-5 to
Package: xterm
Version: 235-1
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
When I resize xterm while vim oder mutt or some other program is running
in it (probably also bash, but it's not that visible there), the program
does not resize to the new window size, but to the last
Subject: uswsusp: Please add BenQ Joybook 5000 to the whitelist
Package: uswsusp
Version: 0.3~cvs20060928-7etch1
Severity: wishlist
Hello,
please add the BenQ Joybook 5000 notebook to the whitelist. s2ram -f
works without problems under X and on a text console. There are no
additional options or
Package: dirmngr
Version: 1.0.1-3
Severity: normal
Tags: patch
I have a problem with the initscript of dirmngr:
isar:~# invoke-rc.d dirmngr stop
Stopping DirMngr: dirmngr/usr/sbin/invoke-rc.d: line 446: 11294 Terminated
${INITDPREFIX}${INITSCRIPTID} ${saction} $@
invoke-rc.d:
* Colin Watson [EMAIL PROTECTED] [2008-08-17 07:45]:
It seems unlikely that this is an infinite loop. mandb simply spawns
manconv for each manual page, and each instance of manconv
(inconveniently) warns about your broken locale settings. Do you have
any reason to believe that the loop is
tags 495434 + pending
thanks
OoO Peu avant le début de l'après-midi du dimanche 17 août 2008, vers
13:47, Julien Cristau [EMAIL PROTECTED] disait :
roundcube-{{pg,my}sql,sqlite}'s short descriptions refer to them as
virtual packages instead of metapackages. A virtual package is one that
Thomas,
Thank you for your input,
On Sun, Aug 17, 2008 at 11:44 AM, Thomas Weber
[EMAIL PROTECTED] wrote:
Package: paraview
Version: 3.2.2-1
Severity: wishlist
Hi,
I just removed vtk and was surprsied that paraview wasn't removed by
dependencies. It seems paraview uses its own internal
package mpc
forwarded 495430 http://www.musicpd.org/mantis/view.php?id=1517
tags 495430 patch
thanks
Additional information and an improved patch are at the mentioned URL.
--
Stanislav
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL
Hi,
is there any news on this ITP? Packages ready or something like that?
Cheers,
--
Yves-Alexis
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: python-reportlab
Version: 2.1dfsg-2
Severity: normal
Tags: patch
With this layout reportlab crash :
from reportlab.platypus import BaseDocTemplate, Frame, Paragraph, PageTemplate
from reportlab.lib.pagesizes import A4, cm
from reportlab.lib.styles import getSampleStyleSheet
from
Package: manpages-de
Version: 0.5-4.1
Severity: minor
Tags: l10n
Hi,
the manpage of ps(1) contains the following formulation:
--cumulative Daten von toten Kindern einbeziehen (als Summe
zusammen mit den Eltern)
Speaking of dead childs is neither political nor ethically correct and
might
Package: iceweasel
Version: 3.0.1-1
Severity: minor
I am using awesome as windowmanager and do not need the directory ~/Desktop. I
changed the default download directory to ~/download and deleted the other
directory. Now everytime i open the preferences, iceweasel creates the Desktop
directory
On Sun, Aug 17, 2008 at 2:31 PM, Christophe Prud'homme
[EMAIL PROTECTED] wrote:
Thomas,
Thank you for your input,
On Sun, Aug 17, 2008 at 11:44 AM, Thomas Weber
[EMAIL PROTECTED] wrote:
Package: paraview
Version: 3.2.2-1
Severity: wishlist
Hi,
I just removed vtk and was surprsied that
Package: ipython
Version: 0.8.4-1
Severity: normal
It seems that bug #409710 came back
In python :
u'é'
u'\xe9'
In ipython :
In [1]: u'é'
Out[1]: u'\xc3\xa9'
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Top 11 Signs Steve Jobs Is Dead http://masekl.wz.cz/1.html
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Package: wnpp
Severity: wishlist
Owner: Ludovic Rousseau [EMAIL PROTECTED]
* Package name: python-pyscard
Version : 1.6.7
Upstream Author : Jean-Daniel Aussel [EMAIL PROTECTED]
* URL : http://pyscard.sourceforge.net/
* License : LGPL v2.1+
Programming Lang:
The related upstream bug (#1915121) has been fixed in release 0.9.5
(released in 2008-07-21).
--
Guilhem BONNEFILLE
-=- #UIN: 15146515 JID: [EMAIL PROTECTED] MSN: [EMAIL PROTECTED]
-=- mailto:[EMAIL PROTECTED]
-=- http://nathguil.free.fr/
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a
Hi,
Am Sonntag, den 17.08.2008, 00:23 +0200 schrieb Marcel:
Package: zhone-session
Version: 0.2
Severity: important
This happened on a virgin installation (Neo Freerunner) after I played around
a bit with suspend, which
was semi-successful but probably is another bug. The next real boot
Jasen Betts wrote:
It just stopped working! (it was working last month)
even harmless binaries refuse to run.
[EMAIL PROTECTED]:/tmp$ fakeroot -l log /bin/true
Killed
[EMAIL PROTECTED]:/tmp$ cat log
handle_memory_allocation: 4458 process failed to mmap memory:
Operation not permitted
Hilmar Preusse [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED]:~ $ dlocate omega.ini
texlive-base: /usr/share/texmf-texlive/tex/plain/config/omega.ini
[EMAIL PROTECTED]:~ $ dlocate aleph.ini
texlive-base: /usr/share/texmf-texlive/tex/plain/config/aleph.ini
[EMAIL PROTECTED]:~ $ dlocate lambda.ini
Package: simutrans-makeobj
Followup-For: Bug #493409
With the attached series of patches I get identical results on i386,
amd64 and mips.
00_big_endian.patch
This uses the endian.h header to detect big-endian systems. This
replaces the hack in the Makefile (seriously, powerpc isn't the only
On Sat, Aug 16, 2008 at 08:44:50PM -0400, Filipus Klutiero wrote:
Version: 1:1.1.0-b4+cvs20080623-1
Frank, I'm not sure why you marked the bug as found in
1:1.1.0-b4+cvs20070924-2, but this is fixed at least in
1:1.1.0-b4+cvs20080623-1.
Uh, my mistake, I meant 1.1.0+cvs20061231-2
Package: gthumb
Version: 3:2.10.8-1
Severity: important
--- Please enter the report below this line. ---
Saving a cropped image does not ask for a filename, rather overwrites
the original without notice!
IMHO, this is a serious bug. It should never overwrite the original, and
if, only after user
Package: simutrans
Version: 100.0+ds1-2
Severity: serious
The version in Debian fails to start:
Reading low level config data ...
Initializing tombstones ...
Reading simuconf.tab successful!
Preparing display ...
Screen Flags: requested=10, actual=10
Loading font 'font/prop.fnt'
font/prop.fnt
On Sat, 16 Aug 2008, Michael Prokop wrote:
I'm not sure about the state of bcm5700 at all. It isn't maintained
by Broadcam for a while AFAICS and the tg3 driver seems to replace it.
Do we need bcm5700 at all?
Basically it is completely unmaintained by upstream, which suggests
using the tg3
Package: msr-tools
Version: 1.1.2-1
Severity: normal
There seems to be something wrong the 32 bit msr tools. I've got a
phenom, so I've been playing with MSRs 0xC0010015 and 0xC0011023 (for the
TLB problems). With a 64 bit install, I can read an write those registers
just fine. With the 32
1 - 100 of 270 matches
Mail list logo