Ed,
Just go to Preferences, File, Packet1 tab and on the lower left is a box
that reads: Spots to Ignore. "None" should be displayed in the box below.
Click in the box displaying None and an arrow will appear. Click on the
arrow and three selections will appear: Ignore, Gray spots or Gray and
B
Sorry, I meant "How are you uploading to LoTW?
Dave
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of N4QS, Dave Perry
Sent: Sunday, April 26, 2020 9:12 AM
To: f6...@hotmail.com; 'DX4WIN Refelector'
Subject: Re: [Dx4win] LoTW
Paul,
I have not h
Paul,
I have not had any problems uploading to LOTW and I typically upload two or
three times per week. Works great. How are you uploading to TQSL?
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Paul F6EXV
Sent: Sunday, April 26, 2020 9:04 AM
To: DX4
Hi Ray,
Glad to hear that the first import worked for you. In the future when you add
more QSOs in WSJT-X, you just import the entire logfile the same way into
DX4WIN. As mentioned below, the default selection when handling dupes is that
any duplicated QSOs from prior imports will be ignor
Mark,
A couple of things to check:
1. In DX4WIN, preferences, packet2, make sure you have typed localhost:7300
and checked the enable button.
2. In VE7CC, Configuration, Ports/Logging Programs, in the middle section,
make sure that you have checked the enable button for local host and that
you
Hi Paul,
Go to File, Parameters, Control tab. Click on the right side of the Type
box to open list of rotators. Two versions of Prosistel should be listed.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Paul GRANGER
Sent: Monday, January 28, 2019
Use the short cut keys. When you have a call in the callsign box in the QSO
window, you can just press F11 and DX4WIN will turn your rotator to the
correct heading. For long path, just press Control F11.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of w3
Alan, I did have to install the lptdriver as you suggested, but I also had
to reset the LPT port address in N1MM+ to match the address for the new PCIe
card. The DXD works fine now in N1MM, but I can't see a way to change the
address in DX4WIN. I have emailed Paul. Thanks for the assist. 73, D
Paul,
This used to bother me. I solved the problem by unchecking the "db reports
to comments" box under the Reporting tab in Settings within WSJT-X. By
doing that, nothing is saved to the comments field in the ADIF file and thus
nothing gets imported into the Call Sign Notes field in DX4WIN.
73,
seemed to mess up the computer. DX4 was not running,
but when I tried to start it last night everything blew up.
Seems to be all okay now. Back to working DX.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net On Behalf
Of N4QS, Dave Perry
Sent: Tuesday, June
correct positions
across both monitors.
Dave
From: Paul van der Eijk
Sent: Tuesday, June 12, 2018 3:17 PM
To: N4QS, Dave Perry
Cc: DX4WIN Reflector
Subject: Re: [Dx4win] Lost the spot window
Dave,
When you close your log there will be fewer windows open; it may have been
I had a major corruption on my main pc. Have restored config settings but
cannot get the Spot window to display. I tried resetting W-SPOT in the
config file to top=0 and left=0, but still cannot see/find spot window.
Packet window at start up works fine and it logs into localhost:7300 and
dis
Eric,
Click F8, type in station call sign, hit enter
All QSOs with that station will be displayed in logbook window
Click QSLs tab, Set QSL Label flag, follow prompts
Click Print QSL labels under same QSLs tab
Select the custom label that you would like to use
Uncheck most Print options (Group Nam
John,
In my case, I am using RemoteRig boxes at both the remote and control sites. I
have a Static IP at the remote site and I forward two or three ports that the
two boxes use to communicate. I am not sure if I prioritized the port
connections in the routers at each end. Will have to check.
John and Kostas,
I also have a K3/0 mini and I am glad to hear this problem happens to other
users. (No, not really!) My case is a little different. I never have a
problem with DX4WIN at the control site losing connection to the K3 at the
remote site. Stays connected -- rock solid for hours
Hi Mike,
Right click anywhere in the Logbook window. Click Report Editor.
Highlight submode within Report Fields list on right and click on the <
button. Then Save.
73,
Dave, N4QS
> Is there a way to remove the "SubMode" column from the Logbook window?
>
> Thanks
>
> Mike
> K7PI
>
> __
How can you tell if you installed the new program update correctly? I thought
I downloaded and installed all files using Check for Updates, but it is still
showing 9.01 in the upper left corner. Shouldn't it read 9.02?
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net
Ernie,
When you go to the update area to do an update, be sure to uncheck Layouts
for Logbook Window. Downloading this will overwrite what you have set up.
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ernie Walls
Hi Mike,
Yes, that would be a nice enhancement! Same goes for Fldigi for the other
digital modes.
73,
Dave, N4QS
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike
Sent: Monday, August 14, 2017 6:08 PM
To: dx4win@mailman.qt
...@gmail.com]
Sent: Friday, August 11, 2017 4:35 PM
To: 'Robert Garceau' ; 'N4QS, Dave Perry' ;
dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report
Hello Bob,
The program only does phone, cw, and digital because that is what the League
counts for DXCC; they don'
Robert,
If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping. You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for th
Ron,
Tough luck -- it's happened to me before. If you have previously saved the
.ini file you can reload it via the merge ini function.
Go here for more info:
http://www.dx4win.com/HelpVer804/index.html?mwfpwriteini.htm
73,
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-bou
Dave, N4QS
-Original Message-
From: John [mailto:gi...@xtra.co.nz]
Sent: Tuesday, August 23, 2016 8:50 PM
To: 'N4QS, Dave Perry'
Subject: RE: [Dx4win] Importing JT65
Hi Dave, try using ADIF Master as your editor.
Cheers
John ZL1ALZ
-Original Message-
From: DX4WIN [mailto:dx4win-bou
extention?
Thanks.
73,
Dave, N4QS
-Original Message-
From: Ernie Walls [mailto:vk...@wallsy.com.au]
Sent: Tuesday, August 23, 2016 8:00 PM
To: 'N4QS, Dave Perry'
Subject: RE: [Dx4win] Importing JT65
Dave, I have been seeking a resolution to this for five years, and no one
can h
I am trying to import the wsjtx.adi file into DX4WIN. However, the comments
field from WSJT-X (which contains the signal reports in db format) is being
put into the Notes for the Call field in DX4WIN instead of the Notes for the
QSO field. I have even tried using Jim's ADIF to DX4WIN utility, but
Cort,
I use WSJT-X for JT65. It is also available as a free download. I setup
both WSJT-X and DX4WIN to run off of the same com port. But I do not run
them at the same time. When I want to work JT65, I click on Radio in DX4WIN
and click on Stop Radio, but I keep DX4WIN open. This disconnects
Have you tried going to the Window tab and clicking on the Logbook?
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Eric
Rosenberg
Sent: Sunday, July 17, 2016 9:54 PM
To: DX4Win Reflector
Subject: [Dx4win] Help with missing logbook window
Found the answer to my own question. I just had to go into the Awards
database and reset all awards to default.
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Tuesday, July 12, 2016 5:58 PM
To: DX4WIN Reflector
I just noticed that I can no longer generate the windows for State, Grid,
IOTA, Zone, etc. When I try to open one of them, I get the following error
message:
"An exception occurred!
Fixed column count must be less than column count"
My country window is still open and working fine, but I
Courtney,
I think that happened to me last year as well. If memory serves me right, I
think all you do is go to Preferences, Screen and uncheck the Leave All
Windows in Original Position. Then close and restart the program. The
windows should move back into the center of the screens. You can r
Dennis,
I think I also had to wire a special serial cable to make it all work
properly. It seemed like the wiring diagram was provided in the help
section of DX4WIN.
Dave, N4QS
-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent
Dennis,
I used to have a Steppir and it worked very well with DX4WIN. You have to
go into the Control tab of preferences in DX4WIN and enable the Steppir
functions. Then you have to go into the menu system of the SDA100 and setup
the controller so that it will track the radio. It has been a whi
32 matches
Mail list logo