Build a very small example, then post it here.
Paul
- Original Message -
From: "itdanny2002" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, October 21, 2008 4:21 AM
Subject: [flexcoders] Re: Still no one knows ? Please help.
>I have tried but not success.
>
> Please note that it is bullet, rad
Can u paste some code what are you trying to do. Do this favour.. I want to
work on it Please... I have used Repeater
component and its the best to use..
Thanks,
with Regards,
Jitendra Jain
From: lysfael <[EMAIL PROTECTED]>
To: flexcoders@yahoogroups
Hello all,
Finally i decided to do the components myself.
It's easier for me like that than using the repeater.
Finally the repeater isn't that powerful component as i though. When
you wanna do something very generic it doesn't fit to your application
anymore.
Thanks all for the help.
I know th
Shailesh, Read this
linkhttp://labs.adobe.com/wiki/index.php/Flex_3:Feature_Introductions:Flex_3_RSLs
Thanks,
with Regards,
Jitendra Jain
From: Shailesh Mangal <[EMAIL PROTECTED]>
To: flexcoders@yahoogroups.com
Sent: Tuesday, 21 October, 2008 7:42:42 AM
Su
I'm damn sure iconColor will work
CheckBox {
iconColor: #ff;
}
Thanks,
with Regards,
Jitendra Jain
From: itdanny2002 <[EMAIL PROTECTED]>
To: flexcoders@yahoogroups.com
Sent: Tuesday, 21 October, 2008 8:42:03 AM
Subject: [flexcoders] Re: Which style
May be your browser is using cache. Try to clean it also..
Thanks,
with Regards,
Jitendra Jain
From: jitendra jain <[EMAIL PROTECTED]>
To: flexcoders@yahoogroups.com
Sent: Tuesday, 21 October, 2008 11:37:48 AM
Subject: Re: [flexcoders] Refreshing Project
Which IDE you are using... If you are using Flex Builder then try to delete
bin-debug folder.
It will help
Thanks,
with Regards,
Jitendra Jain
From: Guilherme Blanco <[EMAIL PROTECTED]>
To: flexcoders@yahoogroups.com
Sent: Tuesday, 21 October, 2008 10:56:
Hi,
After more than 4h trying everything I know and researched until page
25 of Google results, I give up and decided to ask here.
I wrote a piece of code that was trying to do something like that:
AsyncToken(RemoteObjectInstance.AsyncTokenMethodName).send.apply(
RemoteObjectInstance, args );
T
I want to block the user from being able to tab into all controls in a
particular container but only temporarily. At some point I would open
the container to be tabbed into again but for a while I want them
unreachable, but visible.
Seems to me this is something that evey app would need to do a
http://www.adobe.com/support/flashplayer/downloads.html
--- In flexcoders@yahoogroups.com, "Sherif Abdou" <[EMAIL PROTECTED]> wrote:
>
> I have searched the group and googled but nothing came up so is
there even
> one for Flex yet?
>
http://www.adobe.com/support/flashplayer/downloads.html
On 10/20/08 8:57 PM, "Sherif Abdou" <[EMAIL PROTECTED]> wrote:
I have searched the group and googled but nothing came up so is there even one
for Flex yet?
I have searched the group and googled but nothing came up so is there even
one for Flex yet?
Hi fotis,
In the docs example for property "z" two ellipses are moving on screen
because of their z properties changing.
best,
geng
--- In flexcoders@yahoogroups.com, "gwangdesign" <[EMAIL PROTECTED]> wrote:
>
> It's even better now. You can check out them here:
>
>
http://livedocs.adobe.com/fl
You'll have to change the height of the container to be iconHeight +
2*labelHeight then it should work. If I get what you're trying to do, that
is :)
On Tue, Oct 21, 2008 at 1:03 PM, flexaustin <[EMAIL PROTECTED]> wrote:
> I have tried includeInLayout=false and it doesn't work. The icon which
> i
Hi fotis,
You can see what z mean very clearly in the docs example (look for
property "z")in which two ellipses are moving on screen because of
their z properties changing.
best,
geng
--- In flexcoders@yahoogroups.com, "gwangdesign" <[EMAIL PROTECTED]> wrote:
>
> It's even better now. You can c
I have tried but not success.
Please note that it is bullet, radio or checkmark
in MENU control, not in Radio Button Control nor
CheckMark Control.
--- In flexcoders@yahoogroups.com, "Randy Martin" <[EMAIL PROTECTED]> wrote:
>
> The CheckBox has two styles that control the color of the actual
Thanks but I have tried, iconColor doesn't work
Radio-icon is ok but it is a graphic image.
--- In flexcoders@yahoogroups.com, "Michael Schmalle"
<[EMAIL PROTECTED]> wrote:
>
> Hi,
> It's the 'iconColor' style.
>
> These are available for the checkbox;
>
> borderColor, iconColor, fillAlphas, fi
It's even better now. You can check out them here:
http://livedocs.adobe.com/flex/gumbo/langref/flash/display/DisplayObject.html#propertySummary
It's odd that transformX/Y/Z are not showing up although they *are*
members of UIComponent in gumbo...
Anyone from Adobe?
--- In flexcoders@yahoogr
I have tried includeInLayout=false and it doesn't work. The icon which
is 30px by 30px is in a canvas that cannot be any larger than 30 by 30
or the parent container will alter the center of icon. I am not sure
includeInLayout works unless the canvas holding the icon is the
appropriate size to begi
I got my label move vertically down, jus by increasing the size of the
checkbox and by decreasing the label size.. I know this is not the way to do
it right, but for now it a temp solution.
On Tue, Oct 14, 2008 at 4:10 PM, Naveen Booma <[EMAIL PROTECTED]>wrote:
> Tracy,
>
> No ! I dont want the l
Hey guys,
If I create components via MXML code, I can interact with them
and manage their properties just fine in design mode, but I can't seem to
add them without dropping back to code view, ie it's not in the "Components"
list. Is there a reason for this that I can't figure out?
-Josh
--
"Th
No, and we have tried both command line as well FlexBuilder compiles. Same
result :(
-Shailesh
--- In flexcoders@yahoogroups.com, "Ryan Gravener" <[EMAIL PROTECTED]> wrote:
>
> are you compiling with debug enabled?
>
> Ryan Gravener
> http://twitter.com/ryangravener
>
>
> On Mon, Oct 20, 2008
*bump*
Anyone know if this is even possible?
--- In flexcoders@yahoogroups.com, "renzeullo" <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> This will seem like a longshot, but, oh well, here goes...
>
> Is there a way to embed 2 or more fontfaces in a single class? For
> example, I want to embed charac
Thanks. That is not exactly what I am asking. I understand how to set
a callback/listener for Alert.show() as you explained. However, is
there another way to detect from another component when the alert has
been closed (i.e. bubbling, etc.)?
--- In flexcoders@yahoogroups.com, "fotis.chatzinikos"
<
Shoot, don't even worry about the rowIndex, just attach the data object
to the event.
-TH
--- In flexcoders@yahoogroups.com, "Tim Hoff" <[EMAIL PROTECTED]> wrote:
>
>
> Yeah, you would be hosed if a different type of list was used. If
> you're using CHANGE, which is generic for list base, have t
Yeah, you would be hosed if a different type of list was used. If
you're using CHANGE, which is generic for list base, have the parent
class dispatch a custom event, on change, with the row index. The
parent class will always know what kind of list is being used. Then in
the itemRenderer listen
are you compiling with debug enabled?
Ryan Gravener
http://twitter.com/ryangravener
On Mon, Oct 20, 2008 at 7:40 PM, Shailesh Mangal
<[EMAIL PROTECTED]>wrote:
> We recently moved from Flex 2.0.1/LCDS 2.5.1 to Flex3.1.0/LCDS2.6 and
> noticed that by
> doing that our swf went from 1.3MB to 1.9M
I solved it by implementing the IDropInListItemRenderer and listening to
DataGrid(listData.owner).addEventListener(ListEvent.CHANGE,
listChangeHandler)
It's not a best practice, but for now it's enough.
JS
--- In flexcoders@yahoogroups.com, Jo�o <[EMAIL PROTECTED]> wrote:
>
> Hi,
>
> I hav
We recently moved from Flex 2.0.1/LCDS 2.5.1 to Flex3.1.0/LCDS2.6 and noticed
that by
doing that our swf went from 1.3MB to 1.9MB. This is 50% increase in size.
Is this typical with Flex 3?
-Shailesh
Hello all,
any ideas what is the expected behaviour of the mouse wheel in flex apps?
I have noticed that some mxml based trees scroll with the mouse wheel
while actionscript based ones do not.
A few minutes ago i also did a test with the main (root /
mainApplication) making bigger than 100% of t
Hello, Fotis. We appreciate your contributions, so do not worry about
duplicate answers. I don't think anyone can read and keep up with all
the posts in this list, so just jump in when you feel like it.
Tracy
From: flexcoders@yahoogroups.com [mailto:[
Sorry had not seen that Ralf had replied the same think...
--- In flexcoders@yahoogroups.com, "fotis.chatzinikos"
<[EMAIL PROTECTED]> wrote:
>
> Have you tried includeInLayout="false"?
>
> Fotis
>
> --- In flexcoders@yahoogroups.com, "Ralf Bokelberg"
> wrote:
> >
> > includeInLayout=false maybe
Have you tried includeInLayout="false"?
Fotis
--- In flexcoders@yahoogroups.com, "Ralf Bokelberg"
<[EMAIL PROTECTED]> wrote:
>
> includeInLayout=false maybe?
>
> On Mon, Oct 20, 2008 at 9:57 PM, flexaustin <[EMAIL PROTECTED]> wrote:
> > Is it possible using MXML, not AS3 classes, to keep an item
Hi, if i understand correctly, the following doesit:
Alert.show("This is the alert text.","",4,null,alertClosed) ;
where alertClosed is an event listener...
Check the asdoc for the alert.show method ;-)
--- In flexcoders@yahoogroups.com, "sleblang" <[EMAIL PROTECTED]> wrote:
>
> I have an Aler
XML is supposed to be case sensitive, so I imagine there's no way to turn it
off. You can clone the tree and change all node names to lowercase if you
like, but that's probably your only option.
-Josh
On Tue, Oct 21, 2008 at 8:00 AM, Steve Mathews <[EMAIL PROTECTED]> wrote:
> So I just figured
So I just figured out that e4x is case-sensitive, which really doesn't make
any sense to me, but I'll assume there is a good reason. I did some
searching but haven't found any good way to get around this and it is
driving me batty.
Let's say you have this node
http://www.youtube.com/v/Y9HMn6bd-v8&
Well I'll be buggered, it works. Data / DataProvider / DataSource are all
Object too, and you can bind to them. Lousy Repeater :)
Thanks for that Tracy :)
-Josh
On Tue, Oct 21, 2008 at 12:55 AM, Tracy Spratt <[EMAIL PROTECTED]>wrote:
> It is because "currentItem" is an Object, which is not bi
Hi,
I have a Datagrid with several rows and columns. I am using
ItemRenderers on the cells. I need that a specific ItemRenderer
changes the way it looks when the row where he's in is selected. How
can I achieve that?
Is it possible to make the itemrenderer know that and react in real
time? Or is
- Original Message -
From: "flexaustin" <[EMAIL PROTECTED]>
To:
Sent: Monday, October 20, 2008 8:53 PM
Subject: [flexcoders] Re: Resizing a class file
>I am embedding a swf, which I believe requires a type of Class.
Yes, but classes aren't objects. Assign your class as the source of a
includeInLayout=false maybe?
On Mon, Oct 20, 2008 at 9:57 PM, flexaustin <[EMAIL PROTECTED]> wrote:
> Is it possible using MXML, not AS3 classes, to keep an item out of the
> updateDisplayList and/or the measure() method?
>
> I have an icon that is 30px by 30px and needs to remain centered
> withi
Is it possible using MXML, not AS3 classes, to keep an item out of the
updateDisplayList and/or the measure() method?
I have an icon that is 30px by 30px and needs to remain centered
within a component. But the catch is that if someone clicks the icon
it will show another state where I add a graph
I am embedding a swf, which I believe requires a type of Class.
--- In flexcoders@yahoogroups.com, "Michael Schmalle"
<[EMAIL PROTECTED]> wrote:
>
> Hi,
> Your looking at the problem wrong.
>
> You never assign an instance to a Class variable type. You need to
create
> another variable at the cla
I have an Alert.show() being called from a command class. I need to
detect when this Alert is closed in another mxml component (as opposed
to the command class). What's the best way to determine when it's been
closed? Does the event bubble? So far I have not been able to 'catch'
it.
Thanks for an
OMG. This is nuts. I guess I should have read the docs a little
better. =) hey thanks again!
--- In flexcoders@yahoogroups.com, "Daniel Freiman" <[EMAIL PROTECTED]> wrote:
>
> try:
>
>
http://livedocs.adobe.com/flex/3/langref/flash/text/TextField.html#replaceSelectedText()
>
> - Daniel Freiman
>
try:
http://livedocs.adobe.com/flex/3/langref/flash/text/TextField.html#replaceSelectedText()
- Daniel Freiman
On Mon, Oct 20, 2008 at 2:28 PM, xmrcivicboix <[EMAIL PROTECTED]>wrote:
> I have this issue about the rich text editor that I hope someone can
> help with. Basically, I want to be ab
Your theory looks ok, and though it probably does not matter, I would
instantiate and populate the Vbox component first and the last step
would be to add it to the displayList with addChild.
Are you still having a problem?
Tracy
From: flexcoders@yahoog
RTFM
[ResourceBundle("Resource_file_name")]
Forgot this part
--- In flexcoders@yahoogroups.com, "Geoffrey" <[EMAIL PROTECTED]> wrote:
>
> Still have not found a fix for this. Any one else run into an issue
> like this?
>
> Thanks,
> Geoff
> --- In flexcoders@yahoogroups.com, "Geoffre
--- In flexcoders@yahoogroups.com, "Amy" <[EMAIL PROTECTED]> wrote:
>
> Is it possible to wrap an entire Flex component (for instance, a
> TileList) in PaperVision 3D in such a way that you give it a more 3D
> appearance, yet still keep it interactive? I've seen this demo
> http://dev.getoutsma
I have this issue about the rich text editor that I hope someone can
help with. Basically, I want to be able to insert the string
'' at a certain caret index. This works fine when I
use the textarea.text property but when I use textarea.htmlText, it
inserts the ' 7 characters before the caret. This
You can use AlivePDF to generate PDF files.
Has anyone had the with the FlexBuilder Web Service Import Wizard work
with JAX WS? Just checking - I am hearing reports it does not work.
Looks to be a problem working with JAX-WS based web service works
with less complex JAX-RPC based service but can also fail on more
complex RPC
Hi,
Your looking at the problem wrong.
You never assign an instance to a Class variable type. You need to create
another variable at the class level to hold the new instances that are type
Image.
functiontoGetImage() are you returning an instance or a Class to
instantiate?
Mike
On Mon, Oct 20,
Sorry I should have been more specific.
[Bindable]
public var myImage:Class;
myImage = functiontoGetImage(someparam); //obtained via CSS
[Embed(source="ui/nicePngImage.png")]
myImage.width = 10; // no code hinting for height for type Class.
myImage.height = 10; // no code hinting for width for t
Amazing ;-) It works now... Did not know the bit about passing correct
types to setstyles... Thought that i had to pass strings like when
using mxml...
Thanks!
PS: The amazing bit is because all properties that i was setting
seemed to be ok (debug via Alert)...
--- In flexcoders@yahoogroups.co
http://www.infoq.com/articles/blazeds-intro
Does that help?
-James
From: flexcoders@yahoogroups.com
To: flexcoders@yahoogroups.com
Sent: Mon Oct 20 09:52:34 2008
Subject: [flexcoders] How to set up FLEX3/LCDS/JBoss Development Enironment ?
I need start a projec
I need start a project with FLEX3/LCDS on JBoss,
I need set up it and make simple things (like 'hello world') work.
Please help me.
Thanks
Mark
This is what I am now trying to accomplish...
I would like to have a VBOX container to wrap the module and the
button. This way both items can be displayed in one tile instead of
having them split into different tiles...
Then I would like to have a HBOX container to wrap the unload button
and
- Original Message -
From: "Anthony DeBonis" <[EMAIL PROTECTED]>
To:
Sent: Monday, October 20, 2008 5:29 PM
Subject: [flexcoders] Re: flex and oracle
snip
> old Client/Server technology does not work over the "Intranet".
That'll be news to a lot of Oracle developers..
snip
--- In flexcoders@yahoogroups.com, "Haykel BEN JEMIA" <[EMAIL PROTECTED]>
wrote:
>
> Could you post a working example? This would really interest me!
I'll try to make time tonight :-).
-Amy
Hi,
extraTagsSelectionVBox.setStyle("cornerRadius","10") ;
extraTagsSelectionVBox.setStyle("backgroundColor","#00FF00") ;
Set your styles with correct as3 Types;
extraTagsSelectionVBox.setStyle("cornerRadius",10) ;
extraTagsSelectionVBox.setStyle("backgroundColor", 0x00FF00) ;
Mike
On Mon, Oct
You would not want to make a direct Oracle connection from Flex old
Client/Server technology does not work over the "Intranet".
You need to make service call either RemoteObject / WebService/HTTP
Service calls.
For RemoteObject calls you can look into BlazeDS
http://biemond.blogspot.com/2008
Thanks for your help. I got the effect working to my expectations
with your suggestion. I made the Flash movie's height the size that I
wanted it to expand to, then I used JavaScript to toggle the height of
the movie's container div back and forth between the 'hidden' state
and the 'revealed'
Okay, thanks! I guess I can understand that, since it would make AIR
platform-dependent in a way (even though that could be optional).
So, is it possible to create a PDF from an AIR app? Just create one
from scratch and spit it out so that it opens in Acrobat Reader? Or
if not, can I have a gen
I use Inkscape for icons in my flex development. I build the icon,
and then export it as a .PNG file for use by flex. I would much
rather lose the .PNG and just use the .SVG file directly in flex, but
the flex rendering is not quite right. Small rendering (16x16)
results in too much black, becau
Still have not found a fix for this. Any one else run into an issue
like this?
Thanks,
Geoff
--- In flexcoders@yahoogroups.com, "Geoffrey" <[EMAIL PROTECTED]> wrote:
>
> I'm using localization on a flex project for a slightly different use.
> We have 2 projects that share the same code base, but
I'm trying to re-introduce the VBox container to wrap the module and
the button, this way each tile will display a module and a button
together instead of seperating the module and button in seperate
tiles but it always gives me the child error...
Also, is it possible to have the unload button
Hi, i am making a vbox via actionscript and set its width and height
to 200x300... After adding a single button (or anything else) if i
throw an alert with its width and height they seem correct
but...scroll bars appear which can scroll the vbox as if it was 2000
by 2000 pixels wide/high...
The re
I asked this on Saturday, but it was as a clarification to another
question and got no response, so I thought I'd ask again.
What's the best way to deal with modules that define their own set of
AMF endpoints (or even channels)? I need a single services-config.xml
file for the entire war file (I'm
In his own website. not here.
I guess here it's just to learn new things, not to buy one.
It's my opinion.
Regards
Igor
On Sun, Oct 19, 2008 at 3:14 PM, Paul Andrews <[EMAIL PROTECTED]> wrote:
>
> Where would be the right place for something like this?
>
> - Original Message -
> *F
No, I am saying that you would not use an itemEndEdit handler at all,
but would do the item update in the renderer.
I do not know how to directly displatch that event. You might be able
to change the focus off that cell and cause the event to dispatch. Or
perhaps set editedItemPosition=null;
Thanks, Tracy. And you're right. I'm only using an ItemEditor.
There's no custom renderer. I really don't need a custom renderer
because I'm able to pass back a combination of the two selected items
in the itemEditEnd event handler.
Are you saying that if I used a custom renderer, I could trigg
You are sure you are using the Collection API exclusively? And not
doing any direct assignments of values to item porperties? For example:
var oCurrentItem:MyItem = myAC.getItemAt(0);
oCurrentItem.myProperty = "myValue";//direct assignment does not
cause UI to update
If you are doing an
The CheckBox has two styles that control the color of the actual
checkmark:
iconColor - the color of the checkmark
iconDisabledColor - the color of the checkmark when the control is
disabled
Just set these to the colors you want.
~randy
--- In flexcoders@yahoogroups.com, "itdanny2002" <[EMAI
Hi All,
This is more of an AS3 question. I am not sure if this is the correct
forum to ask. I have a SWF which is loaded into the display list and I
need to take a snapshot of it using BitmapData.draw() method. I am
doing it, but as the SWF is of high quality and have got lot of
objects in it, its
Can't help with the PHP code but your theory is good. I wrap all of my
returned data in a "status" node, and my result handlers look for this,
use the error information in an error situation, or just strip off that
node if status is success.
By the way, don't overstress on the OOP theory too s
Could you post a working example? This would really interest me!
On Mon, Oct 20, 2008 at 5:08 PM, Amy <[EMAIL PROTECTED]> wrote:
> --- In flexcoders@yahoogroups.com ,
> "Haykel BEN JEMIA" <[EMAIL PROTECTED]>
> wrote:
> >
> > You can't apply any effects or transformations (alpha, rotation,
> sc
--- In flexcoders@yahoogroups.com, "Haykel BEN JEMIA" <[EMAIL PROTECTED]>
wrote:
>
> You can't apply any effects or transformations (alpha, rotation,
scaling
> etc.) on fonts if they are not embedded!
So they tell me. Yet somehow I do, by setting the blendMode. Go
figure ;-).
Please clarify your question. "rpc" means many things.
Tracy
From: flexcoders@yahoogroups.com [mailto:[EMAIL PROTECTED] On
Behalf Of Deniz Davutoglu
Sent: Monday, October 20, 2008 3:13 AM
To: flexcoders@yahoogroups.com
Subject: [flexcoders] file upload with r
It sounds like you are using renderIsEditor="true", which causes the DG
to use its own interactive event handling and item updating.
For moderately complex interactive renderers, you might be better served
by having the renderer handle that work itself.
Tracy
__
Is it possible to show the total for the stacked bar in column chart
and bar chart?
eg. If I have two series with values 3 and 5 and they are stacked, I
just want to show the total 8 for the whole stack on the top as in
data label. But what I able to find is only showlilng datalabel using
labelPos
--- In flexcoders@yahoogroups.com, "Amy" <[EMAIL PROTECTED]> wrote:
>
> --- In flexcoders@yahoogroups.com, "akila_ksri"
> wrote:
> >
> > --- In flexcoders@yahoogroups.com, "Amy" wrote:
> > >
> > > --- In flexcoders@yahoogroups.com, "akila_ksri"
> wrote:
> > > >
> > > > Hi,
> > > >
> > > > I n
This is a good idea and exactly what I'm going to try now. This will
cover about 98% of my commands, and will have the advantage of both
faults coming from the operations and the service level to have the
same handler.
I guess at this point, I really want to understand the AsyncToken
stuff in rel
--- In flexcoders@yahoogroups.com, "Haykel BEN JEMIA" <[EMAIL PROTECTED]>
wrote:
>
> You can't apply any effects or transformations (alpha, rotation,
scaling
> etc.) on fonts if they are not embedded!
>
>
> On Mon, Oct 20, 2008 at 4:21 PM, Amy <[EMAIL PROTECTED]> wrote:
>
> > --- In flexcode
If that is really what you want to do, it will work. But still, why not
let the repeated component handle the formatting?
Do not subclass repeater, use it normally.
Create a component containing your label and text inputs.
Pass the currentItem into your custom component via a setter
It is because "currentItem" is an Object, which is not bindable. Cast
it to your bindable class:
text="{
RemittanceFileListEntry(remittanceRepeater.currentItem).remittanceFile
}"
Tracy
From: flexcoders@yahoogroups.com [mailto:[EMAIL PROTECTED] On
Behalf Of J
Hi,
It's more like you have to create an instance.
The Class is an actionscript type like Boolean or String. This is like
asking can you write Boolean.value = true;
Try;
override protected function createChildren():void
{
super.createChildren();
instance = new myIcon();
instance.widt
You can't apply any effects or transformations (alpha, rotation, scaling
etc.) on fonts if they are not embedded!
On Mon, Oct 20, 2008 at 4:21 PM, Amy <[EMAIL PROTECTED]> wrote:
> --- In flexcoders@yahoogroups.com ,
> "akila_ksri" <[EMAIL PROTECTED]>
> wrote:
> >
> > --- In flexcoders@yahoogro
I'm sorry but my plate is full.
Someone else may have the time to help you out but if it was me, I
would use this as an opportunity to learn Flex. It is much
easier/better if you have an actual project to complete rather than
just canned lessons (This is my experience anyway).
I had not looked at
Why don't u want to create an instance?
--- In flexcoders@yahoogroups.com, "flexaustin" <[EMAIL PROTECTED]> wrote:
>
> Is it possible to resize a Class file? Say you embed a swf or png. Can
> you then resize it by casting is as something else?
>
> [Bindable]
> [Embed(source="ui/nicePngImage.png"
--- In flexcoders@yahoogroups.com, "akila_ksri" <[EMAIL PROTECTED]>
wrote:
>
> --- In flexcoders@yahoogroups.com, "Amy" wrote:
> >
> > --- In flexcoders@yahoogroups.com, "akila_ksri"
wrote:
> > >
> > > Hi,
> > >
> > > I need to apply horizontal scaling for a text with 'Arial' font.
> > > lbl.s
Since it's a bright and sunny Monday morning, and everyone is
refreshed from a relaxing weekend, I thought I would see if anyone
has an answer for this one.
I need to know how to get Flexbuilder to recognize the expanded
default width of a component. In the case the DateField.
Paul
--- In flex
Is it possible to resize a Class file? Say you embed a swf or png. Can
you then resize it by casting is as something else?
[Bindable]
[Embed(source="ui/nicePngImage.png")]
static public var myIcon:Class;
myIcon.width = 30; // won't work
TIA
I have a DataGrid and I am trying to figure out how to make the font
Bold when the user mouses over a row or selects the row.
Any ideas?
Is it possible to wrap an entire Flex component (for instance, a
TileList) in PaperVision 3D in such a way that you give it a more 3D
appearance, yet still keep it interactive? I've seen this demo
http://dev.getoutsmart.com/os3d/demos/videoroom/, but I have no idea if
it is PaperVision or what
Flex apps are just swfs when compiled. Just add it as any element. If you need
to navigate, use the navigateToURL function to move around the site.
From: "prem_toc" <[EMAIL PROTECTED]>
Sent: Monday, October 20, 2008 5:44 AM
To: flexcoders@yahoogroups.com
S
Do not know if it helps, but your crossdomain.xml is not correctly
formed... check this line:
http://www.w3.org/2001/XMLSchema-instance";
xsi:noNamespaceSchemaLoca
false should be inside the quotes, now i do not have a clue if this is
your problem :-) , but fix this first
Intro: am a asp.net programmer and am a beginner in flex .now my firm
converting into flex .we are developing banking domain application in
asp.net .
our menubar is in flex .how i integrated flex menu into asp.net
master pages . so that each page in asp.net uses that flex menu?
As well as the previous post, you can do the following, it seems
nearer to your case (from asdoc - online):
check the protocol line in the following spec:
protocol="http|https"
result="No default."
resultFormat="object|xml|flashvars|text"
serviceName="No default."
showBusyCursor="
In your item renderer, if you have control over the TimerEvent creation,
set the "bubbles" parameter to true. If you do not, you may want to
catch the event in the renderer and re-dispatch a new one with bubbles
set to true. This will allow your event to bubble out, up the parental
chain unt
When I do following it sometimes shows null in the datalabel on a
barchart eg. "0.null" (the value is actually 0.06)
private function setCustomLabel(element:ChartItem, series:Series):String {
// Get a refereence to the current data element.
var data:BarSeriesItem = BarSerie
1 - 100 of 116 matches
Mail list logo