Yes when i run radiusd in debug mode it shows the framed-route entry there in radius reply messages... can u tell me what part in NAS could be misconfigured ?
i saw my ppp source files... there are some files ip-up and login.radius which contains code to add Framed-Route. there is a parameter $ro
gentlemen,
I am using free radius and its fantastic
Took me some time, and some questions, so thanks for the help.
I
have one problem still though.
I am using mysql integration but accounting does not seem to
work. data seems to be writtem but all records show as
"deleted"
any ideas ?
On Wednesday 17 November 2004 08:34, Nirmal wrote:
> i don't know wheather [Framed-Route] it works or not.
Well, thet run radiusd in debug mode - radiusd -X. If everything is OK within
database, you should see reply message from freeradius to NAS after user
authenticate. If you see that reply me
Hi,
i have read rfc 2865 and rlm_sql module also and i used "=" as an Op but in any case secondary route is not being added on primary ppp interface...
i don't know wheather [Framed-Route] it works or not.
Nirmal
Nachko Halachev <[EMAIL PROTECTED]> wrote:
Hello,About how to use Framed-Route
Hi guys,
We had a problem with multiple accounting records,
which we resolved by adding unique key to radacct
table and modifying the insert/update SQL for
accounting records.
It seems that by solving this problem we had taken on
a bigger problem. Because server is now returning
error for any du
David Mitton wrote:
A Linksys WRT54GS with Sveasoft looks like a bargin functionally.
Amazon.com has the WRT54GS for $81.99 - $10 Rebate.
Yeah, that's a good price. I use the WRT54GS with the tinyPEAP embedded
RADIUS server. The firmware is based on Sveasoft's version 4.0, because
it's freely a
On 11/16/2004 10:11 AM, Alan DeKok wrote:
Michael Griego <[EMAIL PROTECTED]> wrote:
> I was looking around yesterday, and I noticed that Linksys' new wireless
> router (WTV56G I believe) perports to support 802.1x. It retails for
> about $180 depending on where you look. It's more than just an AP
On Tue, 16 Nov 2004, Dave wrote:
HI,
I am currently setting up freeradius with openldap as a backend for testing.
I have read through the various walk-throughs and have noticed that most
show the radiusprofile objectclass to be structural. But looking at the
RADIUS-LDAPv3.schema, it shows that obje
On Mon, 15 Nov 2004, Edgars wrote:
doesn't this project recall something? dialpup-admin2?
Certainly not dialupadmin2 :-)
From the screenshots it's just a lot less pages than dialupadmin with a little
bit more info (in the online users page for instance) specifically designed for
mikrotik administ
"jh vg" <[EMAIL PROTECTED]> wrote:
> I am working my university thesis using Freeradius. Its about WLAN Roaming.
> We want to reduce the messages that are sent during an EAP authentication
> between the foreign and home server( so we use proxy ).
I'm not sure that's possible.
> No matter how
On Mon, 15 Nov 2004, Osvaldo Alvarez Pozo wrote:
Hy
hello everybody, this is my first email to the list.
I have just installed freeradius and configured it to work with mysql for
storing user information. As a admin interface I have dialup_admin. But I
have a problem, I need a user interface, so
On Mon, 15 Nov 2004, Nishen Narandas wrote:
Good day all,
I am currently implementing FreeRadius for testing with our GGSN (Radius
client) in our GPRS network. We have an External LDAP server which
contains all usernames, passwords and other attributes.
I would like to if it is possible to configu
Maybe this will interest a few of the list members.
- Forwarded message from SecureW2 <[EMAIL PROTECTED]> -
Subject: Alfa & Ariss Make SecureW2 Available as Open Source
From: SecureW2 <[EMAIL PROTECTED]>
To: undisclosed-recipients: ;
Date: Tue, 16 Nov 2004 15:37:29 +0100
Thread-Topic: Alfa
HI,
I am currently setting up freeradius with openldap as a backend for testing.
I have read through the various walk-throughs and have noticed that most
show the radiusprofile objectclass to be structural. But looking at the
RADIUS-LDAPv3.schema, it shows that objectclass as auxiliary. I am guess
Hi
I am working my university thesis using Freeradius. Its about WLAN Roaming.
We want to reduce the messages that are sent during an EAP authentication
between the foreign and home server( so we use proxy ). No matter how i
have searched i cannt find an rfc describing the sequence of messages
"jesk" <[EMAIL PROTECTED]> wrote:
> in some auth-replies there a missing some attributes but instead of them i
> can see at the end of a tcpdump line the following:
> "[|radius]"
>
> what does this exactly mean?
I suggest asking the tcpdump people. They wrote.
Alan DeKok.
-
List info/sub
jagadish gowda <[EMAIL PROTECTED]> wrote:
> i 'am writing client in java.
I would say that your client has bugs. Read the RFC's to see how
EAP-MD5 is implemented.
And the debug log from FreeRADIUS will tell you what's going on, and
why. Read it. If you're not going to read it, you'll never
Michael Basso" <[EMAIL PROTECTED]> wrote:
> I wish I did. If I get any documentation I will be sure to let you know. I'm
> looking through the radiusd.conf file at the moment and I am a bit
> overwhelmed.
The O'Reilly RADIUS book is a good beginning for people starting
with RADIUS.
FreeRAD
Hi all,
I 'am trying to authenticate using EAP-MD5. After
some requests Free RADIUS server resends the Access
Challenge multiple times.
It does not say what's the error is and output of the
log is
"Resending the access chanllenge" to the client.
But it works for the same user in new call.
On Tue, 16 Nov 2004 12:06:52 -0500
"Janakan Rajendran" <[EMAIL PROTECTED]> wrote:
Thatz great! Michael. I'm wondering do you have any documentation to
configure the freeradius. If you could share that with me, I'd really
appreciate.
I wish I did. If I get any documentation I will be sure to let
"Michael J. Hartwick" <[EMAIL PROTECTED]> wrote:
> I haven't really followed this thread, but if you look at the top
> three lines you see that it is listening on 1812, 1813, and 1814 not
> 1645, and 1646 which radacct is trying to use. I don't remember
> exactly when the standard ports for RADIUS
I have a question to tcpdumping FreeRADIUS.
in some auth-replies there a missing some attributes but instead of them i
can see at the end of a tcpdump line the following:
"[|radius]"
what does this exactly mean?
f.e.:
---
12:58:05.215548 x.x.x.x.1645 > x.x.x.x.1645: rad-access-accept 217 [id 14
On Tue, 16 Nov 2004 at 17:39 (+0100), Andreas Meyer wrote:
AM> Listening on authentication *:1812
AM> Listening on accounting *:1813
AM> Listening on proxy *:1814
AM> Ready to process requests.
AM>
AM> When I do now a radlogin I get this in /var/log/messages:
AM>
AM> Nov 16 17:24:59 gamma radlogin
Thatz great! Michael. I'm wondering do you have any documentation to
configure the freeradius. If you could share that with me, I'd really
appreciate.
Thank you,
Regards,
Janakan Rajendran
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Michael
Basso
Sen
--without, (instead of --disable) worked!!!
On Tue, 16 Nov 2004 11:40:51 -0500
"Michael Basso" <[EMAIL PROTECTED]> wrote:
Janakan,
Thanks for your help. Still no luck. I deleted the freeradius folder that is
created after untaring the initial file. Is there another freeradius folder I
should
Janakan,
Thanks for your help. Still no luck. I deleted the freeradius folder that is
created after untaring the initial file. Is there another freeradius folder I
should delete before running configure again? Does it matter where I untar
the freeradius file to?
On Tue, 16 Nov 2004 11:18:28
"Alan DeKok" <[EMAIL PROTECTED]> wrote:
> > radius 1812/tcp# RADIUS
>
> That's nice. What ports does the server say it's listening on when
> you run it in debugging mode?
I made a fresh install. Debugging mode says this:
Starting - reading configuration files ...
reread_conf
> > read_config_files: reading clients
> > Segmentation fault
>
> This happens when the code in the server disagrees with itself.
> e.g. Version X of the server is using modules from version Y, or the
> header files were updated, and onlysome parts of the server were re-built.
>
> Try deleting
Michael,
The command is correct. What I did is I manually delete the free radius
folder and then started new with the configure command disabling
rlm_x99_token(your syntax is correct) and it worked. No errors during make
and make install.
Try deleting the folder and redo again. It might help.
Re
"Peter L." <[EMAIL PROTECTED]> wrote:
> i get a segmentation fault when starting freeradius.
>
> read_config_files: reading clients
> Segmentation fault
This happens when the code in the server disagrees with itself.
e.g. Version X of the server is using modules from version Y, or the
header f
Janakan,
I tried to disable rlm_x99_token as you say you did.
I ran ./configure --disable-rlm_x99_token. Is this not right?
only to get the same errors:
In file included from x99_rlm.c:54:
x99.h:26:42: openssl/des.h: No such file or directory
gmake[6]: *** [x99_rlm.o] Error 1
gmake[6]: Leaving
Hi all,
i get a segmentation fault when starting freeradius.
read_config_files: reading clients
Segmentation fault
Any ideas?
Kind regards,
Peter
see gdb output below.
--
(gdb) set args -x -x
(gdb) break clients_free
Breakpoint 1 at 0x8074faa: file client.c, line 52.
(gdb) run
St
"Carlos" <[EMAIL PROTECTED]> wrote:
> Excuse me, just a mistakethis morning in writting the files. I've read a lot
> the documentations and the files themselves.
> There are a descriptions for the files; users, clients.conf and proxy.conf :
...
But not the debug logs.
Please go back, and READ
Andreas Meyer <[EMAIL PROTECTED]> wrote:
> Did some tests again. I set port = 0 in radiusd.conf and /etc/services
> looks like this:
>
> radius 1812/tcp# RADIUS
That's nice. What ports does the server say it's listening on when
you run it in debugging mode?
> # netstat -pantu
"Tobias Amon" <[EMAIL PROTECTED]> wrote:
> How do I change the configuration of my precompiled freeradius on suse
> 9.1 after the installation.
> Freeradius was installed by default with no snmp-support.
> Is there any way to do this, or do i have to reinstall and/or update to
> 1.0?
You have to
Nirmal <[EMAIL PROTECTED]> wrote:
> how can i use Framed-Route Attribute in radius ?
>
> what is the exact format for this attribute ?
http://www.freeradius.org/rfc/attributes.html
Click on the attribute to find documentation for it.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Michael Griego <[EMAIL PROTECTED]> wrote:
> I was looking around yesterday, and I noticed that Linksys' new wireless
> router (WTV56G I believe) perports to support 802.1x. It retails for
> about $180 depending on where you look. It's more than just an AP
> though, it has full blown router functi
Hello,
I'm trying to establish a secure TLS connection between a Freeradius and
an Openldap server.
The "openssl s_client -connect" command successfully establishes a
connection to the openldap server on the mentioned port with the following
certificates, but when trying to bind from freeradius I
I was looking around yesterday, and I noticed that Linksys' new wireless
router (WTV56G I believe) perports to support 802.1x. It retails for
about $180 depending on where you look. It's more than just an AP
though, it has full blown router functions.
--Mike
On Tue, 2004-11-16 at 08:00, Joe Ma
What about dynamic WEP re-keying?
As far as i know this is not supported by Satori 4.0 and i could not get
any more information from Sveasoft concerning this point. The wireless
interface seems to be something they don't mess with much.
How could I tell that different keys are actually being
Hi.
I'd like to set up wireless at my home and do it securely. At work im
using Cisco 1200s with Freeradius authenticating with EAP/TLS. I'd like to
do the same thing at home, but the Cisco 1200s are *way* outside of my
budget :-)
Does anyone have any suggestions for a reasonably priced 802.
Excuse me, just a mistakethis morning in writting the files. I've read a lot
the documentations and the files themselves.
There are a descriptions for the files; users, clients.conf and proxy.conf :
/raddb/users
demolocal Auth-Type := Local, Password == "demolocal"
Service-Type = Framed-User,
"Alan DeKok" <[EMAIL PROTECTED]> wrote:
> Andreas Meyer <[EMAIL PROTECTED]> wrote:
> > I wanted to use ports 1812 and 1813. If I set port=0 in radiusd.conf,
> > radacct
> > wants to connect to 1646 although I edited /etc/services to use 1813 for
> > radius-acct.
>
> I suggest finding out why t
Hi,
in my logs I see this string:
Error: rlm_sql: Stop packet with zero session length.
Reading through the source code and the mailing list, I think that stop
packets with zero session length must be dropped by FR.
But in my logs I see the error above, the record is updated into the DB and
FR e
Hi,
I'm using freeradius 0.9.3 on Suse 9.1
I authorize my users with mysql.
My AccessPoint is a Cisco 350.
How do I change the configuration of my precompiled freeradius on suse 9.1
after the installation.
Freeradius was installed by default with no snmp-support.
Is there any way to do this, o
Wodan wrote:
I posted this question on the Sveasoft board once.
The WEP key you enter in WEP RADIUS mode is the key that is used for
encryption. Usually, in normal WEP mode, you use the same key for
encryption and authentication. In the WRT54GS RADIUS mode, you use
RADIUS for authentication and
On Tue, Nov 16, 2004 at 08:02:42AM +, carlos akitani wrote:
> Hi, I've go the same
> problem but no solution.
> I've added the Auth-Type:=Local in the users file but the same
> answer:
> auth: No authenticate method (Auth-Type) configuration found
> for the request: Rejecting the user
> an
Hi, I've go the same problem but no solution.
I've added the Auth-Type:=Local in the users file but the same answer:
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
and even (username/password) not valide (but I've declared them in the clients.conf
48 matches
Mail list logo