Re: [Vo]:Aviation Week and the Lockheed Fusion Reactor

On Thu, Oct 16, 2014 at 7:54 AM, Alan Fletcher wrote: http://www.networkworld.com/article/2834452/data-center/ > lockheed-martins-cfr-a-hot-fusion-breakthrough-for-power-generation.html > It seems to me that a major weakness of the new Lockheed Martin skunkworks reactor design is the fact that t

RE: [Vo]:coherent perfect absorption

Hi Bob, I've been very busy for the last year and have not had the time to partake in the lively discussions in the Collective, and with the added publicity that vortex-l has had (thanks to Mark Gibbs and others) the quality of the discussions has definitely increased significantly. we've also los

[Vo]:The Big Banks are Certainly Paying Attention to the E-Cat

http://www.sifferkoll.se/sifferkoll/?p=394 The Big Banks are Certainly Paying Attention to the E-Cat While looking in the logs after publishing the E-Cat report I found out that within minutes it was downloaded by an IP number owned by Blackrock. Within minutes after that oil futures started to f

Re: [Vo]:temperature of the resistor wire.

If a polariton condensate is in place throughout the E-Cat, the 900 watts of electrical heat pumping from external power would be evenly distributed throughout the total volume of the reactor. Under the influence of Polariton condensation, the temperature of the reactor's total volume would be the

Re: [Vo]:Greenhouse HotCat

Interesting point Eric. The materials needed to build an ECAT are in enormous quantities within the Earth. A small reaction here, another there, and so on can add up to a tremendous effect when considering the entire world. To obtain a calibration, I have read that the rate of fusion energy be

Re: [Vo]:temperature of the resistor wire.

On Thu, Oct 16, 2014 at 10:34 AM, Jones Beene wrote: No matter how strongly you believe in the phenomenon of LENR, and I’m > firmly in that camp – bad actors should be weeded out. Rossi is a bad actor > here ... This is the same conclusion that Krivit has come to, and that Pomp and Mary Yugo an

Re: [Vo]:temperature of the resistor wire.

Bob, If we assume that a high temperature structure is surrounding and immediately adjacent to the fuel chamber the materials within that chamber should be as a minimum the structure temperature unless heat is flowing into the fuel chamber. I suppose that the fuel could be cooler provided you

Re: [Vo]:Greenhouse HotCat

On Thu, Oct 16, 2014 at 8:58 PM, H Veeder wrote: I am not sure what you are asking, but the Earth supposedly generates some > heat too. > The earth does kind of have the composition of a large, spherical E-Cat. And there is a magnetic field that exists due in part to the rotation of the molten c

Re: [Vo]:Greenhouse HotCat

Thanks for the heads up Harry. I wonder if others on the list are seeing my new topics being sent to spam. The question that I am asking is whether or not there are clues to the behavior of the temperature and power output correlation from the latest HotCat tests revealed by greenhouse gas beh

Re: [Vo]:Greenhouse HotCat

Dave, for some reason when you start a new thread your message appears in my spam folder. I am not sure what you are asking, but the Earth supposedly generates some heat too. I am not sure how much of this heat contributes to the global temperature. Harry On Thu, Oct 16, 2014 at 1:00 PM, David

Re: [Vo]:Greenhouse HotCat

Dave, for some reason when you start a new thread your message appears in my spam folder. I am not sure what you are asking, but the Earth supposedly generates some heat too. I am not sure how much of this heat contributes to the global temperature. Harry On Thu, Oct 16, 2014 at 1:00 PM, Davi

Re: [Vo]:Is the beginning of the end of the ECat saga?

Why would anyone rational care what what the pseudo-skeptics have to say anymore? They used to be relevant but they aren't anymore. Too much is going on now for them to be able to impede progress much. On Thu, Oct 16, 2014 at 10:22 PM, Foks0904 . wrote: > This is sort of a microcosm of 89' a

Re: [Vo]:Is the beginning of the end of the ECat saga?

This is sort of a microcosm of 89' all of again in terms of skepticism. The excess heat is almost undoubtedly real, but let's make it about the integrity of nuclear product measurements. Pomp is doing the same red herring shit that Hueizenga, Close, Parker, etc. engaged in. On Thu, Oct 16, 2014 at

Re: [Vo]:Is the beginning of the end of the ECat saga?

The source of the energy is irrelevant to the existence of excess energy. The ECAT shouldn't fall based on incorrect and ultimately irrelevant beliefs of why it functions. On Fri, Oct 17, 2014 at 2:43 PM, H Veeder wrote: > > > On Thu, Oct 16, 2014 at 9:20 PM, Jones Beene wrote: > >> *From:*

Re: [Vo]:OT: The Phone Cops

On Tue, Oct 14, 2014 at 2:58 PM, Terry Blanton wrote: > To see how truly powerful TPC is, you have to watch this: > > http://en.wikipedia.org/wiki/The_President's_Analyst > > ThePhoneCompany https://www.youtube.com/watch?v=Vbbpjd52atw&feature=youtu.be&t=5m59s Maybe this inspired the scene from

Re: [Vo]:temperature of the resistor wire.

Dave-- I thought it was reported that Rossi cut the end of the reactor with a diamond saw. There would have been no plugged charging hole to contend with. I do not think the temperature in the reactor was high enough to melt the Ni or Ni alloy nano particles. As I suggested the energy of re

Re: [Vo]:OT: The Courage to Create

sorry the link to ​_ Psychoanalyst Rollo May~We Lack Mystery!_ should be https://www.youtube.com/watch?v=Zi9NAzMJbds Harry On Thu, Oct 16, 2014 at 10:11 PM, H Veeder wrote: > The Courage to Create by Rollo May > https://www.youtube.com/watch?v=auOW5tNFjZg > > > ​ > ​ > Psychoanalyst Rollo May~

[Vo]:OT: ​Brené Brown - Embracing Vulnerability

​​ Brené Brown - Embracing Vulnerability https://www.youtube.com/watch?v=AO6n9HmG0qM ​Harry​

[Vo]:OT: The Courage to Create

The Courage to Create by Rollo May https://www.youtube.com/watch?v=auOW5tNFjZg Psychoanalyst Rollo May~We Lack Mystery! https://www.youtube.com/watch?v=Vw0SCmoj9tc ​Harry​

Re: [Vo]:Is the beginning of the end of the ECat saga?

On Thu, Oct 16, 2014 at 9:20 PM, Jones Beene wrote: > *From:* H Veeder > > > > Doesn't look good for Rossi, but I am not sure I understand Pomp's point. > Is Pomp saying Rossi is rewriting history to make it look like​ Ni62 was > present in the ash of his earlier EC at? > http://stephanpomp.bl

Re: [Vo]:temperature of the resistor wire.

So Rossi's quasi-scam is to jerk around a bunch of scientists with phony reactors so as to throw off his competitors? harry On Thu, Oct 16, 2014 at 4:11 PM, Jones Beene wrote: > > From: Randy Wuller > > So for example, let’s say Rossi knew that by setting up the

RE: [Vo]:Is the beginning of the end of the ECat saga?

From: H Veeder Doesn't look good for Rossi, but I am not sure I understand Pomp's point. Is Pomp saying Rossi is rewriting history to make it look like​ Ni62 was present in the ash of his earlier EC at? http://stephanpomp.blogspot.se/2014/10/mr-rossi-i-admire-you.html ​Harry​ No, he

RE: [Vo]:Draft Ragone Plot FINAL -- OK TO USE

My plot's on Mark Gibbs of course (because he commisioned last years). I like this one in Japanese --- by Toshiro Sengaku http://amateur-lenr.blogspot.jp/2014/10/e-cat_13.html

[Vo]:Is the beginning of the end of the ECat saga?

Doesn't look good for Rossi, but I am not sure I understand Pomp's point. Is Pomp saying Rossi is ​rewriting history to make it look ​ ​ Ni62 was present in the ash of his earlier ​EC at? http://stephanpomp.blogspot.se/2014/10/mr-rossi-i-admire-you.html ​Harry​

Re: [Vo]:temperature of the resistor wire.

Bob, how would we explain the appearance of the ash material that was extracted from the tube? According to the testers the device can operate at higher powers than they experienced which would certainly lead to complete melting of the nickel. What are the chances that some of the other mater

Re: [Vo]:Re: Australian TV does cold fusion

Can't You, Blaze? Hard to consider that offensive - part of every day life:) Not very creative rather an indication of a small vocabulary, but offensive no not at all. If you add perception then we have another story. Best Regards , Lennart Thornros www.StrategicLeadershipSac.com lenn...@thornros

Re: [Vo]:temperature of the resistor wire.

One thing we can be pretty sure of is that any Ni in this reactor at 1300-1400C will have no nano-features. The nano-scale portions melt at about half the temperature of the bulk material. So what would happen is that if there was Ni with nano-scale features, these features would melt before the

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

one things to notice on triphase speculation previous e-cat where mono phase. triphase is easier to manage in industrial resort. beside rotating field as in an engine, triphase allows to make an absolutely constant power (the sum of instantaneous power of 3 phase is constant)... however the triac

Re: [Vo]:Failure to fulfil the Galileo test

woh well said. now he accuse Ugg of having beaten his wife and hidden his pile of dry wood from the locals... which prove fire does not exist... note that Pomp state that denying hand-fire and ugg is not the same... but ugg making fire with hand is extraordinary... because hand-fire is forbidden

RE: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

What happens inside the eCat isn’t known. A magnetic field can be required (And most probably it is the case). For the cold eCat, Rossi may have used a magnet for the sake of simplicity. The wiggly filament let me think of a 2 magnetic fields that can occur inside the eCat: One global field made fr

Re: [Vo]:temperature of the resistor wire.

Axil, David etal-- I would have guessed that a vapor of Li metal (I am not sure a plasma would occur) may be a fairly good heat transfer agent, much like He works as a cooling fluid. I would be surprised if there were a 200 degree delta T between the edge of the reactor and its center. De

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

I don't think there was anything this fancy in Rossi's original eCats. He had an internal cartridge heater which would have had little magnetic field escaping and it was single phase. He also had an auxiliary heater wrapped around the outside that would have had more magnetic field and it was als

RE: [Vo]:temperature of the resistor wire.

Jones: If it isn’t a crime it could still be the subject of a civil action, but if neither apply, what is it? Maybe there is some moral line crossed but I suggest the word scam is not the right one in that case. Ransom _ From: Jones Beene [mailto:jone

RE: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

The next question is a 3phases AC supply needed to reproduce the eCat effect? The cold eCat don't use a 3phases power supply but Rossi could have used magnet inside the cold eCat (Samarium cobalt magnet). _ From: Bob Higgins [mailto:rj.bob.higg...@gmail.com] Sent: jeudi 16 octobre 201

RE: [Vo]:temperature of the resistor wire.

Bob, I like your idea on the mixing plasma with the rotating field of a 3phases AC power supply. The heat is more homogeneous spread inside the reactor and create a flux. Moreover it may have an action on the reaction occurring in the eCat. Arnaud _ From: Bob Higgins [mailto:rj.bo

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

I think we are describing pretty much the same thing. Only I don't believe there is anything but refractory castable insulation in the large diameter support cylinders at the end of the convection tube. I think the heater coils are axial and the 3-phase drive produces a linear conveyer, which whe

RE: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

So why then does Rossi use a 3phases electrical power source? For such kind of power this not needed. 1000W uses less than 5A. So my guess is that Rossi uses the Rotating magnetic field in its Ecat (http://en.wikipedia.org/wiki/Rotating_magnetic_field ). In this schema, the end caps could be a

RE: [Vo]:temperature of the resistor wire.

From: Randy Wuller So for example, let’s say Rossi knew that by setting up the constraints associated with testing the ash, (1% from stuff that fell out), everyone would be misled as to what was actually happening. That’s more appropriately described as protectin

RE: [Vo]:temperature of the resistor wire.

Jones: I thought you were a lawyer, what you discuss isn’t fraud.So for example, let’s say Rossi knew that by setting up the constraints associated with testing the ash, (1% from stuff that fell out), everyone would be misled as to what was actually happening. That’s more appropriately descri

[Vo]:A short issue of CONFRONT JOURNAL

Dear Readers, Polarization regarding the Rossi Report is almost completed. The open problem remain open. Less events take place I published anyway: http://egooutpeters.blogspot.ro/2014/10/lenr-confront-journal-october-16-2014.html In the final part I am asking for your help. Peter -- Dr. Pete

Re: [Vo]:Aviation Week and the Lockheed Fusion Reactor

On Thu, Oct 16, 2014 at 10:54 AM, Alan Fletcher wrote: > On Gibb's Site -- NO! Not Gibbsite !!! > > http://www.networkworld.com/article/2834452/data-center/lockheed-martins-cfr-a-hot-fusion-breakthrough-for-power-generation.html > > he notes that the disposal problem of 10's of thousands of dead r

RE: [Vo]:temperature of the resistor wire.

From: David Roberson * Jones-please continue to speculate about new thoughts as that is our best method of getting to the truth. I get a bit concerned when I hear you speak of scams. Please suggest a better word to describe the actions of an inventor – if h

Re: [Vo]:Failure to fulfil the Galileo test

dear Ian, Nice, why you do not send it to my blog Ego Out - I publish guest editorials with pleasure.and I like the idea. Peter On Thu, Oct 16, 2014 at 8:53 PM, Ian Walker wrote: > Hi all > > If you refuse to look through the telescope then you have failed the > Galileo test; you have stopped be

[Vo]:E-cat test: Using the 800W as calibration, +100W as test

Hi all, again I try to prepare arguments for deniers. Precision is not my problem... The problem with the e-cat test, as McKubre said is tha the calibration was not at 1250C/1400C but at 450C now if you are sincerely skeptic, and not totally conspiracy theorist, you have to admit that the power

[Vo]:Failure to fulfil the Galileo test

Hi all If you refuse to look through the telescope then you have failed the Galileo test; you have stopped being a scientist and practising a religion. A little classical style play from 20,000 years ago. Prometheus (An inventor and log bridge builder) "I have invented fire!" Stephan Pomp, (A pri

Re: [Vo]:temperature of the resistor wire.

Dave, I like the idea of a triply wound helix, but I will have to think about whether it would provide the same kind of conveyor moving field - it may. It would solve the cross-over issues of the coils. It is the non-axial components of the field that would seem to be at play in both cases - trip

Re: [Vo]:temperature of the resistor wire.

Jones-please continue to speculate about new thoughts as that is our best method of getting to the truth. I get a bit concerned when I hear you speak of scams. You apparently have drawn that conclusion at this point due to the isotope measurements and that is certainly strange. But, have you

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

The tread [Vo]:coher​ent perfect absorption explains how a polariton condensate can be sustained by intense pumping and huge densities of polaritons. The positive feedback of nuclear energy through superabsorbtion takes polariton densities to very high densities and thus high temperatures as that e

RE: [Vo]:temperature of the resistor wire.

BTW Dave, No matter how strongly you believe in the phenomenon of LENR, and I’m firmly in that camp – bad actors should be weeded out. Rossi is a bad actor here, even if he is only trying to protect his trade secret. We would all be better off if this report never surfaced. John Stuart

Re: [Vo]:temperature of the resistor wire.

Bob, there may be a need for the type of behavior that you are describing, but I am looking for the simplest explanation. I plead ignorant to your description of an issue with the wires crossing over in some manner. In my imagination, I can see all three wires spiriling around in parallel with

RE: [Vo]:temperature of the resistor wire.

From: David Roberson Jones, what you write here is pure speculation. Dave - I made it clear that this was my opinion. Can I not express my opinion? In order to fill in the blanks, to make a complete scenario – that does require speculation. But it is fact, ABSOLUTE FACT - that the o

Re: [Vo]:temperature of the resistor wire.

I wish my model would handle that question, but it is quite limited. Think of it as being able to estimate overall trends instead of minute details. Stable operation of the HotCat appears to be due to the geometry of the device. The external area and how it is treated with the rings, etc. coul

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

Just a visual http://www.descaler.si/assets/images/coil_ani.gif On Thu, Oct 16, 2014 at 12:59 PM, Bob Higgins wrote: > Seems to me that at the temperatures we are talking about (>1000C) that > bulk magnetic effects are probably out of the question. A plasma of Li > would be a conductor and a c

Re: [Vo]:Sunspots

Agree On Thu, Oct 16, 2014 at 1:03 PM, H Veeder wrote: > Sunspots are examples of unusually cool regions persisting in hotter > surroundings, so it is not beyond all experience to say that the > temperature of the wire inside the reactor remains below its melting > temperature. > > Harry > >

[Vo]:Sunspots

Sunspots are examples of unusually cool regions persisting in hotter surroundings, so it is not beyond all experience to say that the temperature of the wire inside the reactor remains below its melting temperature. Harry

[Vo]:Greenhouse HotCat

A thought occurred to me this morning concerning the temperature measurements and output power calculations from the latest HotCat testing. What if the same general type of effect is working in the CAT test that is revealed by the Earth and the greenhouse gas process? We assume that the Earth

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

Seems to me that at the temperatures we are talking about (>1000C) that bulk magnetic effects are probably out of the question. A plasma of Li would be a conductor and a conductor could be conveyed in a moving magnetic field. I don't think any motion will occur because of any bulk magnetic affect

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

[image: dereefer] On Thu, Oct 16, 2014 at 12:50 PM, Bob Cook wrote: > Bob. Amaud, etal-- > > I had the same thought as Amaud. The wiring arrangement may be deigned to > create a magnetic field inside the reactor to align magnetic m

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

Bob. Amaud, etal-- I had the same thought as Amaud. The wiring arrangement may be deigned to create a magnetic field inside the reactor to align magnetic moments of the various entities and facilitate resonant interactions at varying probabilities to control the rate of reaction. Bob Cook

[Vo]:Giant Rydberg excitons in the copper oxide Cu2O

http://www.nature.com/nature/journal/v514/n7522/full/nature13832.html Giant Rydberg excitons in the copper oxide Cu2O Nature 514, 343–347 (16 October 2014) doi:10.1038/nature13832Received 05 March 2014 Accepted 02 September 2014 Published online 15 October 2014 A highly excited atom having an el

Re: [Vo]:temperature of the resistor wire.

Dave, that was my first thought too, but in going over the construction of the heater coils, it turned out to be a pain to deal with the heater wire cross-overs. You would not do this just because you were planning to connect the array to a 3-phase supply. You could simply have an array of 3N, ha

Re: [Vo]:temperature of the resistor wire.

Dear David, It might be informative if your model could be modified to check the heat production of the nickel particles and their temperature and the flow of that heat from the central channel that encloses the nickel particles to the outside edge of the reactor some centimeters away so that th

Re: [Vo]:temperature of the resistor wire.

Jones, what you write here is pure speculation. I share some concerns about the temperature measurements and how they might influence the output power, but there is certainly no serious evidence that Rossi was able to impact the testing in a serious manner. Why do you continue to suggest a sca

RE: [Vo]:temperature of the resistor wire.

From: Robert Lynn Well I can argue that there is no excess heat - The thermography is proven to be wrong (inconel resistance wires melt at 1300-1350°C << 1412°C surface reactor temp claimed, and wires would have to be much hotter than reactor surface). Robert,

Re: [Vo]:temperature of the resistor wire.

The three phase connection is not too surprising if we assume that many more of these units are to be mounted in a complete system. It would be extra work for Rossi to construct a new device using only one phase for the scientists to measure. I give him a pass on this point. In the past I hav

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

I believe the ends are completely sealed with a compound like the Vitcast 1400 INS-H. I also think the space between the inner and radiating tube is probably filled with this same compound. You don't want air flowing in there in case there are cracks in the alumina adhesive put over the heater co

RE: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

Bob, Just a thought. I'm not an expert of magnetic confinement of plasma. But, the < encaps > might contain a proper wires configuration to close the rotating magnetic field formed by the 3 phases current. Arnaud _ From: Bob Higgins [mailto:rj.bob.higg...@gmail.com] Sent: jeudi

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

I am pretty sure these "endcaps" are just mechanical supports for the hot tube in the middle. They are large alumina outer rings that have been filled with a cast-able refractory insulation such as a Vitcast 1200 INS or Vitcast 1400 INS-H. They insulate the mounting apparatus from the hot radiati

Re: [Vo]:coherent perfect absorption

http://scitation.aip.org/content/aip/journal/jcp/136/3/10.1063/1.3678015 Quote: Within the optical cavity, the photons acquire an effective mass as determined by the cut-off frequency of the cavity that can be 6–7 orders of magnitude less than mass of an electron. *Depending upon the density, this

Re: [Vo]:Aviation Week and the Lockheed Fusion Reactor

On Gibb's Site -- NO! Not Gibbsite !!! http://www.networkworld.com/article/2834452/data-center/lockheed-martins-cfr-a-hot-fusion-breakthrough-for-power-generation.html he notes that the disposal problem of 10's of thousands of dead reactors is non-trivial.

Re: [Vo]:coherent perfect absorption

Mark-- The size of the coherent system is the key. Many bodies share the distribution of energy and total coherent system energy changes. Two body systems like that heretofore considered in hot fusion physics (and extended to all solid state physics by many) are not the answer to the cold fus

Re: [Vo]:Australian TV does cold fusion

yeah, i sent out that correction... Just sayin' On Thu, Oct 16, 2014 at 4:02 AM, Patrick Ellul wrote: > New Zealand is a different country from Australia. > Just saying. > > On Thu, Oct 16, 2014 at 8:37 PM, Blaze Spinnaker > wrote: > >> >> http://www.3news.co.nz/world/scientist-claims-to-have-m

Re: [Vo]:Australian TV does cold fusion

New Zealand is a different country from Australia. Just saying. On Thu, Oct 16, 2014 at 8:37 PM, Blaze Spinnaker wrote: > > http://www.3news.co.nz/world/scientist-claims-to-have-mastered-cold-fusion-2014101510 > > Sadly, terribly terribly ignorant. > -- Patrick www.tRacePerfect.com The dail

RE: [Vo]:temperature of the resistor wire.

The reason Rossi is using a 3 phases power supply might be the rotating field created by a 3 phases AC power supply. _ From: Robert Lynn [mailto:robert.gulliver.l...@gmail.com] Sent: jeudi 16 octobre 2014 11:09 To: vortex-l@eskimo.com Subject: Re: [Vo]:temperature of the resistor wire

[Vo]:HydroFusion

Did anyone pursue a share placement with Hydro Fusion? I had been thinking about it but didn't sign the NDA that they sent me. Amusingly, HydroFusion has no names on its website so that's obviously a rather huge flag.

[Vo]:Re: Australian TV does cold fusion

Oh sorry, new zealand tv. On Thu, Oct 16, 2014 at 2:38 AM, Blaze Spinnaker wrote: > Can they say hell on tv in Australia? > > On Thu, Oct 16, 2014 at 2:37 AM, Blaze Spinnaker > wrote: > >> >> http://www.3news.co.nz/world/scientist-claims-to-have-mastered-cold-fusion-2014101510 >> >> Sadly, terr

[Vo]:Re: Australian TV does cold fusion

Can they say hell on tv in Australia? On Thu, Oct 16, 2014 at 2:37 AM, Blaze Spinnaker wrote: > > http://www.3news.co.nz/world/scientist-claims-to-have-mastered-cold-fusion-2014101510 > > Sadly, terribly terribly ignorant. >

[Vo]:Australian TV does cold fusion

http://www.3news.co.nz/world/scientist-claims-to-have-mastered-cold-fusion-2014101510 Sadly, terribly terribly ignorant.

Re: [Vo]:temperature of the resistor wire.

All fair points of view Dave. Though with regard to 3 phase, at 900W input there is obviously no need, adds a lot of mechanical complexity (3 heater wires rather than 1) and a little more electrical complexity and would still get impulsive waveform using rectified DC + half H bridge to provide an

Re: [Vo]:temperature of the resistor wire.

Sorry Robert, I will make every attempt to use your correct name in the future. Thanks for clarifying your reasons for exhibiting the strong critical position against the report. I admit that I harbor questions about the accuracy of the temperature measurements for many of the reasons that you

Re: [Vo]:Engineering and materials issues with high temperature hot-cat Lugano demo

I have a strong suspicion that the path of maximum heat transfer needs to be via radiation in order for the device to be stable. This is due to the forth order with temperature being able to win against a lower order power generation process. Dave -Original Message- From: Eri

Re: [Vo]:E-cat : Minimum COP assuming worst mistakes possible

the emissivity was used, it was not the blackbody equation but is not that the greybody equation (correct term?) ? anyway what have to be the sensitivity error to explain the apparent COP ? naively I assume that the emissivity during the calibration have to be much much higher than assumed and t