Re: v17 conundrum in design

[Alberto Bachler via 4D_Tech]

Chuck

I experienced this behavior from time to time since v16r2 (and maybe even v15)
I believe can happen when  2 or more instances of 4D are running at the same 
time

Last time was yesterday (macOS)
I restarted my Mac and everything came back to normality


Cordialmente,

Alberto



> El 07-02-2019, a las 17:39, Chuck Miller via 4D_Tech <4d_tech@lists.4d.com> 
> escribió:
> 
> Hi All,
> 
> I have an object method that shows no break points either in the method or 
> when I show break points, yet it continues to stop at a particular line of 
> code and it is annoying. Any ideas out there what it might be.
> 
> Thanks and regards
> Chuck
> 
> 
> Chuck Miller Voice: (617) 739-0306
> Informed Solutions, Inc. Fax: (617) 232-1064   
> mailto:cjmillerinformed-solutions.com 
> Brookline, MA 02446 USA Registered 4D Developer
>   Providers of 4D and Sybase connectivity
>  http://www.informed-solutions.com  
> 
> This message and any attached documents contain information which may be 
> confidential, subject to privilege or exempt from disclosure under applicable 
> law.  These materials are intended only for the use of the intended 
> recipient. If you are not the intended recipient of this transmission, you 
> are hereby notified that any distribution, disclosure, printing, copying, 
> storage, modification or the taking of any action in reliance upon this 
> transmission is strictly prohibited.  Delivery of this message to any person 
> other than the intended recipient shall not compromise or waive such 
> confidentiality, privilege or exemption from disclosure as to this 
> communication. 
> 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: Urgent! Port conflict - 4D Server

[Stephen J. Orth via 4D_Tech]

David,

Great news, glad to assist!

Best,


Steve

*
  Stephen J. Orth
  The Aquila Group, Inc.  Office:  (608) 834-9213
  P.O. Box 690   Mobile:  (608) 347-6447
  Sun Prairie, WI 53590

  E-Mail:  s.o...@the-aquila-group.com
*

-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of David Rose via 4D_Tech
Sent: Thursday, February 7, 2019 7:32 PM
To: 4d_tech@lists.4d.com
Cc: David Rose 
Subject: RE: Urgent! Port conflict - 4D Server

Neil and Steve - you both were correct - there was a 4D Server service running 
that had been created since the last reboot many months ago.
Thanks to you both for the fast and accurate response!!


**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: Urgent! Port conflict - 4D Server

[David Rose via 4D_Tech]

Neil and Steve - you both were correct - there was a 4D Server service
running that had been created since the last reboot many months ago.
Thanks to you both for the fast and accurate response!!

>
> Message: 12
> Date: Thu, 7 Feb 2019 13:07:39 -0600
> From: "Stephen J. Orth" 
> To: "'4D iNug Technical'" <4d_tech@lists.4d.com>
> Cc: "'David Rose'" 
> Subject: RE: Urgent! Port conflict - 4D Server
> Message-ID: <00b001d4bf18$6529b720$2f7d2560$@the-aquila-group.com>
> Content-Type: text/plain;   charset="utf-8"
>
> David,
>
> Is the system running as a service and you don't know it?
>
> Steve
>
 
>
> Subject: Urgent! Port conflict - 4D Server
>
> On a Windows 7 box running 4D Server v15, I rebooted the computer today and 
> found, when I restarted 4D Server and tried to open the database (or a brand 
> new database), I get this error:
> "Failed to launch DB4D Server. Please make sure that the port assigned to the 
> DB4D Server is not used by another application." When I click Continue I get 
> "Failed to create a listening socket."
>
> I tried opening the database in 4D, but got a message asking if I wanted to 
> open it in read only mode. If I say yes, I am not able to get into the design 
> environment in order to get into Database Settings in order to try changing 
> the port numbers for the application server, web server, SQL server.
>
> I tried repairing both the structure and data files, trashing the 4D  and 4D 
> Server Preferences files, and reinstalling 4D Server. No luck. I also user 
> the Unlocker utility to check to see if the data files are falsely locked. 
> They're not.
>
> If you know of a solution to this problem, please email me directly:
> drose...@gmail.com.
>
> TIA,
> David
>
***
>
> From: "Dennis, Neil" 
>
> Ensure that no other version of 4D are running on the machine... as a service 
> or as another user.
>
> Neil
>
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: v17 conundrum in design

[Chuck Miller via 4D_Tech]

Thanks Steve,

I do not think so and the debugger comes up on a NON alp line

Regards

Chuck

 Chuck Miller Voice: (617) 739-0306
 Informed Solutions, Inc. Fax: (617) 232-1064   
 mailto:cjmillerinformed-solutions.com 
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D and Sybase connectivity
  http://www.informed-solutions.com  

This message and any attached documents contain information which may be 
confidential, subject to privilege or exempt from disclosure under applicable 
law.  These materials are intended only for the use of the intended recipient. 
If you are not the intended recipient of this transmission, you are hereby 
notified that any distribution, disclosure, printing, copying, storage, 
modification or the taking of any action in reliance upon this transmission is 
strictly prohibited.  Delivery of this message to any person other than the 
intended recipient shall not compromise or waive such confidentiality, 
privilege or exemption from disclosure as to this communication. 

> On Feb 7, 2019, at 4:53 PM, Stephen J. Orth via 4D_Tech 
> <4d_tech@lists.4d.com> wrote:
> 
> Do you have ALP's auto-trace logic turned on?  It is a nice feature that 
> opens the debugger if ALP encounters a problem, which may be what you are 
> seeing.

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: v17 conundrum in design

[Stephen J. Orth via 4D_Tech]

Chuck,

Do you have ALP's auto-trace logic turned on?  It is a nice feature that opens 
the debugger if ALP encounters a problem, which may be what you are seeing.


Steve

*
  Stephen J. Orth
  The Aquila Group, Inc.  Office:  (608) 834-9213
  P.O. Box 690   Mobile:  (608) 347-6447
  Sun Prairie, WI 53590

  E-Mail:  s.o...@the-aquila-group.com
*

-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Charles Miller via 
4D_Tech
Sent: Thursday, February 7, 2019 3:24 PM
To: 4D iNug Technical <4d_tech@lists.4d.com>
Cc: Charles Miller 
Subject: Re: v17 conundrum in design

Nope it is filling arrays and then updating ALP. After tabbing out of query 
field

Chuck

On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> 
wrote:

> Chuck
> look for a hard break (TRACE)
> either in a called component, plugin or method called via EXECUTE 
> FORMULA
>
> On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote:
> > Chuck
> > also I get this sometimes when there is break in a method which is 
> > called via EXECUTE FORMULA especially if the method is called during 
> > screen drawing (On display
> > detail)
> >
> > Chip
> > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 
> > 4D_Tech wrote:
> >> Hi All,
> >>
> >> I have an object method that shows no break points either in the 
> >> method or when I show break points, yet it continues to stop at a 
> >> particular line of code and it is annoying. Any ideas out there 
> >> what it might be.
> >>
> >> Thanks and regards
> >> Chuck
> >>
> >>
> >
>
> --
> --
> >>  Chuck Miller Voice: (617) 739-0306  Informed Solutions, Inc. Fax: 
> >> (617) 232-1064  mailto:cjmillerinformed-solutions.com  
> >> Brookline, MA 02446 USA Registered 4D Developer
> >>Providers of 4D and Sybase connectivity
> >>   http://www.informed-solutions.com
> >>
> >
>
> --
> --
> >> This message and any attached documents contain information which 
> >> may be confidential, subject to privilege or exempt from disclosure 
> >> under applicable law.  These materials are intended only for the 
> >> use of the intended recipient. If you are not the intended 
> >> recipient of this transmission, you are hereby notified that any 
> >> distribution, disclosure, printing, copying, storage, modification 
> >> or the taking of any action in reliance upon this transmission is 
> >> strictly prohibited.  Delivery of this message to any person other 
> >> than the intended recipient shall not compromise or waive such 
> >> confidentiality, privilege or exemption from disclosure as to this 
> >> communication.
> >>
> >> ***
> >> ***
> >> 4D Internet Users Group (4D iNUG)
> >> Archive:  http://lists.4d.com/archives.html
> >> Options: https://lists.4d.com/mailman/options/4d_tech
> >> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> >> ***
> >> ***
> > ---
> > Gas is for washing parts
> > Alcohol is for drinkin'
> > Nitromethane is for racing
> > 
> > **
> > 4D Internet Users Group (4D iNUG)
> > Archive:  http://lists.4d.com/archives.html
> > Options: https://lists.4d.com/mailman/options/4d_tech
> > Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> > 
> > **
> ---
> Gas is for washing parts
> Alcohol is for drinkin'
> Nitromethane is for racing
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

--
-
 Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064  Informed Solutions, 
Inc.
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D, Sybase & SQL Server connectivity
  http://www.informed-solutions.com
-
This message and any attached documents contain information which may be 
confidential, subject to privilege or exempt from disclosure under applicable 
law.  These materials are intended only for the use of the intended recipient. 
If you are not the intended recipient of this transmission, you are hereby 
notified 

RE: v17 conundrum in design

[Drew Waddell via 4D_Tech]

We call these phantom breakpoints.  It's been a bug for so so long.  The only 
way I have figured out how to fix it is to create a new User in Design -> 
Toolbox -> Users and begin to use the new user until the issue presents itself 
again.  For what it's worth we started to notice them a lot when we start using 
the line separator character "\".  I believe there have been taow tickets that 
have gone nowhere in the past.

-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Charles Miller via 
4D_Tech
Sent: Thursday, February 7, 2019 4:24 PM
To: 4D iNug Technical <4d_tech@lists.4d.com>
Cc: Charles Miller 
Subject: Re: v17 conundrum in design

Nope it is filling arrays and then updating ALP. After tabbing out of query 
field

Chuck

On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech < 4d_tech@lists.4d.com> 
wrote:

> Chuck
> look for a hard break (TRACE)
> either in a called component, plugin or method called via EXECUTE 
> FORMULA
>
> On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote:
> > Chuck
> > also I get this sometimes when there is break in a method which is 
> > called via EXECUTE FORMULA especially if the method is called during 
> > screen drawing (On display
> > detail)
> >
> > Chip
> > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 
> > 4D_Tech wrote:
> >> Hi All,
> >>
> >> I have an object method that shows no break points either in the 
> >> method or when I show break points, yet it continues to stop at a 
> >> particular line of code and it is annoying. Any ideas out there 
> >> what it might be.
> >>
> >> Thanks and regards
> >> Chuck
> >>
> >>
> >
>
> --
> --
> >>  Chuck Miller Voice: (617) 739-0306  Informed Solutions, Inc. Fax: 
> >> (617) 232-1064  mailto:cjmillerinformed-solutions.com  
> >> Brookline, MA 02446 USA Registered 4D Developer
> >>Providers of 4D and Sybase connectivity
> >>   http://www.informed-solutions.com
> >>
> >
>
> --
> --
> >> This message and any attached documents contain information which 
> >> may be confidential, subject to privilege or exempt from disclosure 
> >> under applicable law.  These materials are intended only for the 
> >> use of the intended recipient. If you are not the intended 
> >> recipient of this transmission, you are hereby notified that any 
> >> distribution, disclosure, printing, copying, storage, modification 
> >> or the taking of any action in reliance upon this transmission is 
> >> strictly prohibited.  Delivery of this message to any person other 
> >> than the intended recipient shall not compromise or waive such 
> >> confidentiality, privilege or exemption from disclosure as to this 
> >> communication.
> >>
> >> ***
> >> ***
> >> 4D Internet Users Group (4D iNUG)
> >> Archive:  http://lists.4d.com/archives.html
> >> Options: https://lists.4d.com/mailman/options/4d_tech
> >> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> >> ***
> >> ***
> > ---
> > Gas is for washing parts
> > Alcohol is for drinkin'
> > Nitromethane is for racing
> > 
> > **
> > 4D Internet Users Group (4D iNUG)
> > Archive:  http://lists.4d.com/archives.html
> > Options: https://lists.4d.com/mailman/options/4d_tech
> > Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> > 
> > **
> ---
> Gas is for washing parts
> Alcohol is for drinkin'
> Nitromethane is for racing
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

--
-
 Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064  Informed Solutions, 
Inc.
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D, Sybase & SQL Server connectivity
  http://www.informed-solutions.com
-
This message and any attached documents contain information which may be 
confidential, subject to privilege or exempt from disclosure under applicable 
law.  These materials are intended only for the use of the intended recipient. 
If you are not the intended recipient of this transmission, you are hereby 
notified that any distribution, disclosure, printing, copying, storage, 
modification or the taking of 

Re: v17 conundrum in design

[Chip Scheide via 4D_Tech]

is there a trace or break in the query?  i.e. Query by Formula where 
the formula is a method


On Thu, 7 Feb 2019 16:24:27 -0500, Charles Miller via 4D_Tech wrote:
> Nope it is filling arrays and then updating ALP. After tabbing out of query
> field
> 
> Chuck
> 
> On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech <
> 4d_tech@lists.4d.com> wrote:
> 
>> Chuck
>> look for a hard break (TRACE)
>> either in a called component, plugin or method called via EXECUTE
>> FORMULA
>> 
>> On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote:
>>> Chuck
>>> also I get this sometimes when there is break in a method which is
>>> called via EXECUTE FORMULA
>>> especially if the method is called during screen drawing (On display
>>> detail)
>>> 
>>> Chip
>>> a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via
>>> 4D_Tech wrote:
 Hi All,
 
 I have an object method that shows no break points either in the
 method or when I show break points, yet it continues to stop at a
 particular line of code and it is annoying. Any ideas out there what
 it might be.
 
 Thanks and regards
 Chuck
 
 
>>> 
>> 
>> 

  Chuck Miller Voice: (617) 739-0306
  Informed Solutions, Inc. Fax: (617) 232-1064
  mailto:cjmillerinformed-solutions.com
  Brookline, MA 02446 USA Registered 4D Developer
Providers of 4D and Sybase connectivity
   http://www.informed-solutions.com
 
>>> 
>> 
>> 

 This message and any attached documents contain information which may
 be confidential, subject to privilege or exempt from disclosure under
 applicable law.  These materials are intended only for the use of the
 intended recipient. If you are not the intended recipient of this
 transmission, you are hereby notified that any distribution,
 disclosure, printing, copying, storage, modification or the taking of
 any action in reliance upon this transmission is strictly
 prohibited.  Delivery of this message to any person other than the
 intended recipient shall not compromise or waive such
 confidentiality, privilege or exemption from disclosure as to this
 communication.
 
 **
 4D Internet Users Group (4D iNUG)
 Archive:  http://lists.4d.com/archives.html
 Options: https://lists.4d.com/mailman/options/4d_tech
 Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
 **
>>> ---
>>> Gas is for washing parts
>>> Alcohol is for drinkin'
>>> Nitromethane is for racing
>>> **
>>> 4D Internet Users Group (4D iNUG)
>>> Archive:  http://lists.4d.com/archives.html
>>> Options: https://lists.4d.com/mailman/options/4d_tech
>>> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
>>> **
>> ---
>> Gas is for washing parts
>> Alcohol is for drinkin'
>> Nitromethane is for racing
>> **
>> 4D Internet Users Group (4D iNUG)
>> Archive:  http://lists.4d.com/archives.html
>> Options: https://lists.4d.com/mailman/options/4d_tech
>> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
>> **
> 
> -- 
> 
-
>  Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064
>  Informed Solutions, Inc.
>  Brookline, MA 02446 USA Registered 4D Developer
>Providers of 4D, Sybase & SQL Server connectivity
>   http://www.informed-solutions.com
> 
-
> This message and any attached documents contain information which may be
> confidential, subject to privilege or exempt from disclosure under
> applicable law.  These materials are intended only for the use of the
> intended recipient. If you are not the intended recipient of this
> transmission, you are hereby notified that any distribution, disclosure,
> printing, copying, storage, modification or the taking of any action in
> reliance upon this transmission is strictly prohibited.  Delivery of this
> message to any person other than the intended recipient shall not
> compromise or waive such confidentiality, privilege or exemption
> from disclosure as to this communication.
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> 

Re: v17 conundrum in design

[Charles Miller via 4D_Tech]

Nope it is filling arrays and then updating ALP. After tabbing out of query
field

Chuck

On Thu, Feb 7, 2019 at 4:15 PM Chip Scheide via 4D_Tech <
4d_tech@lists.4d.com> wrote:

> Chuck
> look for a hard break (TRACE)
> either in a called component, plugin or method called via EXECUTE
> FORMULA
>
> On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote:
> > Chuck
> > also I get this sometimes when there is break in a method which is
> > called via EXECUTE FORMULA
> > especially if the method is called during screen drawing (On display
> > detail)
> >
> > Chip
> > a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via
> > 4D_Tech wrote:
> >> Hi All,
> >>
> >> I have an object method that shows no break points either in the
> >> method or when I show break points, yet it continues to stop at a
> >> particular line of code and it is annoying. Any ideas out there what
> >> it might be.
> >>
> >> Thanks and regards
> >> Chuck
> >>
> >>
> >
>
> 
> >>  Chuck Miller Voice: (617) 739-0306
> >>  Informed Solutions, Inc. Fax: (617) 232-1064
> >>  mailto:cjmillerinformed-solutions.com
> >>  Brookline, MA 02446 USA Registered 4D Developer
> >>Providers of 4D and Sybase connectivity
> >>   http://www.informed-solutions.com
> >>
> >
>
> 
> >> This message and any attached documents contain information which may
> >> be confidential, subject to privilege or exempt from disclosure under
> >> applicable law.  These materials are intended only for the use of the
> >> intended recipient. If you are not the intended recipient of this
> >> transmission, you are hereby notified that any distribution,
> >> disclosure, printing, copying, storage, modification or the taking of
> >> any action in reliance upon this transmission is strictly
> >> prohibited.  Delivery of this message to any person other than the
> >> intended recipient shall not compromise or waive such
> >> confidentiality, privilege or exemption from disclosure as to this
> >> communication.
> >>
> >> **
> >> 4D Internet Users Group (4D iNUG)
> >> Archive:  http://lists.4d.com/archives.html
> >> Options: https://lists.4d.com/mailman/options/4d_tech
> >> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> >> **
> > ---
> > Gas is for washing parts
> > Alcohol is for drinkin'
> > Nitromethane is for racing
> > **
> > 4D Internet Users Group (4D iNUG)
> > Archive:  http://lists.4d.com/archives.html
> > Options: https://lists.4d.com/mailman/options/4d_tech
> > Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> > **
> ---
> Gas is for washing parts
> Alcohol is for drinkin'
> Nitromethane is for racing
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

-- 
-
 Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064
 Informed Solutions, Inc.
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D, Sybase & SQL Server connectivity
  http://www.informed-solutions.com
-
This message and any attached documents contain information which may be
confidential, subject to privilege or exempt from disclosure under
applicable law.  These materials are intended only for the use of the
intended recipient. If you are not the intended recipient of this
transmission, you are hereby notified that any distribution, disclosure,
printing, copying, storage, modification or the taking of any action in
reliance upon this transmission is strictly prohibited.  Delivery of this
message to any person other than the intended recipient shall not
compromise or waive such confidentiality, privilege or exemption
from disclosure as to this communication.
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: v17 conundrum in design

[Chip Scheide via 4D_Tech]

Chuck
look for a hard break (TRACE) 
either in a called component, plugin or method called via EXECUTE 
FORMULA

On Thu, 7 Feb 2019 16:12:38 -0500, Chip Scheide via 4D_Tech wrote:
> Chuck
> also I get this sometimes when there is break in a method which is 
> called via EXECUTE FORMULA
> especially if the method is called during screen drawing (On display 
> detail)
> 
> Chip
> a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 
> 4D_Tech wrote:
>> Hi All,
>> 
>> I have an object method that shows no break points either in the 
>> method or when I show break points, yet it continues to stop at a 
>> particular line of code and it is annoying. Any ideas out there what 
>> it might be.
>> 
>> Thanks and regards
>> Chuck
>> 
>> 
> 

>>  Chuck Miller Voice: (617) 739-0306
>>  Informed Solutions, Inc. Fax: (617) 232-1064   
>>  mailto:cjmillerinformed-solutions.com 
>>  Brookline, MA 02446 USA Registered 4D Developer
>>Providers of 4D and Sybase connectivity
>>   http://www.informed-solutions.com  
>> 
> 

>> This message and any attached documents contain information which may 
>> be confidential, subject to privilege or exempt from disclosure under 
>> applicable law.  These materials are intended only for the use of the 
>> intended recipient. If you are not the intended recipient of this 
>> transmission, you are hereby notified that any distribution, 
>> disclosure, printing, copying, storage, modification or the taking of 
>> any action in reliance upon this transmission is strictly 
>> prohibited.  Delivery of this message to any person other than the 
>> intended recipient shall not compromise or waive such 
>> confidentiality, privilege or exemption from disclosure as to this 
>> communication. 
>> 
>> **
>> 4D Internet Users Group (4D iNUG)
>> Archive:  http://lists.4d.com/archives.html
>> Options: https://lists.4d.com/mailman/options/4d_tech
>> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
>> **
> ---
> Gas is for washing parts
> Alcohol is for drinkin'
> Nitromethane is for racing 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **
---
Gas is for washing parts
Alcohol is for drinkin'
Nitromethane is for racing 
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: v17 conundrum in design

[Chip Scheide via 4D_Tech]

Chuck
also I get this sometimes when there is break in a method which is 
called via EXECUTE FORMULA
especially if the method is called during screen drawing (On display 
detail)

Chip
a break in codeOn Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 
4D_Tech wrote:
> Hi All,
> 
> I have an object method that shows no break points either in the 
> method or when I show break points, yet it continues to stop at a 
> particular line of code and it is annoying. Any ideas out there what 
> it might be.
> 
> Thanks and regards
> Chuck
> 
> 

>  Chuck Miller Voice: (617) 739-0306
>  Informed Solutions, Inc. Fax: (617) 232-1064   
>  mailto:cjmillerinformed-solutions.com 
>  Brookline, MA 02446 USA Registered 4D Developer
>Providers of 4D and Sybase connectivity
>   http://www.informed-solutions.com  
> 

> This message and any attached documents contain information which may 
> be confidential, subject to privilege or exempt from disclosure under 
> applicable law.  These materials are intended only for the use of the 
> intended recipient. If you are not the intended recipient of this 
> transmission, you are hereby notified that any distribution, 
> disclosure, printing, copying, storage, modification or the taking of 
> any action in reliance upon this transmission is strictly 
> prohibited.  Delivery of this message to any person other than the 
> intended recipient shall not compromise or waive such 
> confidentiality, privilege or exemption from disclosure as to this 
> communication. 
> 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **
---
Gas is for washing parts
Alcohol is for drinkin'
Nitromethane is for racing 
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: v17 conundrum in design

[Charles Miller via 4D_Tech]

I already did what you suggest to no avail. I even reccreated code but did
use copy and paste

On Thu, Feb 7, 2019 at 4:10 PM Chip Scheide via 4D_Tech <
4d_tech@lists.4d.com> wrote:

> a break in a component, plug-in
>
> an oddity...
> use runtime explorer to clear all break points
> - if it still persists
> try restart 4D
>
> I have seen this in earlier versions too
> Chip
>
> On Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 4D_Tech wrote:
> > Hi All,
> >
> > I have an object method that shows no break points either in the
> > method or when I show break points, yet it continues to stop at a
> > particular line of code and it is annoying. Any ideas out there what
> > it might be.
> >
> > Thanks and regards
> > Chuck
> >
> >
>
> 
> >  Chuck Miller Voice: (617) 739-0306
> >  Informed Solutions, Inc. Fax: (617) 232-1064
> >  mailto:cjmillerinformed-solutions.com
> >  Brookline, MA 02446 USA Registered 4D Developer
> >Providers of 4D and Sybase connectivity
> >   http://www.informed-solutions.com
> >
>
> 
> > This message and any attached documents contain information which may
> > be confidential, subject to privilege or exempt from disclosure under
> > applicable law.  These materials are intended only for the use of the
> > intended recipient. If you are not the intended recipient of this
> > transmission, you are hereby notified that any distribution,
> > disclosure, printing, copying, storage, modification or the taking of
> > any action in reliance upon this transmission is strictly
> > prohibited.  Delivery of this message to any person other than the
> > intended recipient shall not compromise or waive such
> > confidentiality, privilege or exemption from disclosure as to this
> > communication.
> >
> > **
> > 4D Internet Users Group (4D iNUG)
> > Archive:  http://lists.4d.com/archives.html
> > Options: https://lists.4d.com/mailman/options/4d_tech
> > Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> > **
> ---
> Gas is for washing parts
> Alcohol is for drinkin'
> Nitromethane is for racing
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **

-- 
-
 Chuck Miller Voice: (617) 739-0306 Fax: (617) 232-1064
 Informed Solutions, Inc.
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D, Sybase & SQL Server connectivity
  http://www.informed-solutions.com
-
This message and any attached documents contain information which may be
confidential, subject to privilege or exempt from disclosure under
applicable law.  These materials are intended only for the use of the
intended recipient. If you are not the intended recipient of this
transmission, you are hereby notified that any distribution, disclosure,
printing, copying, storage, modification or the taking of any action in
reliance upon this transmission is strictly prohibited.  Delivery of this
message to any person other than the intended recipient shall not
compromise or waive such confidentiality, privilege or exemption
from disclosure as to this communication.
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: v17 conundrum in design

[Chip Scheide via 4D_Tech]

a break in a component, plug-in

an oddity...
use runtime explorer to clear all break points 
- if it still persists 
try restart 4D

I have seen this in earlier versions too
Chip

On Thu, 7 Feb 2019 15:39:26 -0500, Chuck Miller via 4D_Tech wrote:
> Hi All,
> 
> I have an object method that shows no break points either in the 
> method or when I show break points, yet it continues to stop at a 
> particular line of code and it is annoying. Any ideas out there what 
> it might be.
> 
> Thanks and regards
> Chuck
> 
> 

>  Chuck Miller Voice: (617) 739-0306
>  Informed Solutions, Inc. Fax: (617) 232-1064   
>  mailto:cjmillerinformed-solutions.com 
>  Brookline, MA 02446 USA Registered 4D Developer
>Providers of 4D and Sybase connectivity
>   http://www.informed-solutions.com  
> 

> This message and any attached documents contain information which may 
> be confidential, subject to privilege or exempt from disclosure under 
> applicable law.  These materials are intended only for the use of the 
> intended recipient. If you are not the intended recipient of this 
> transmission, you are hereby notified that any distribution, 
> disclosure, printing, copying, storage, modification or the taking of 
> any action in reliance upon this transmission is strictly 
> prohibited.  Delivery of this message to any person other than the 
> intended recipient shall not compromise or waive such 
> confidentiality, privilege or exemption from disclosure as to this 
> communication. 
> 
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **
---
Gas is for washing parts
Alcohol is for drinkin'
Nitromethane is for racing 
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

v17 conundrum in design

[Chuck Miller via 4D_Tech]

Hi All,

I have an object method that shows no break points either in the method or when 
I show break points, yet it continues to stop at a particular line of code and 
it is annoying. Any ideas out there what it might be.

Thanks and regards
Chuck


 Chuck Miller Voice: (617) 739-0306
 Informed Solutions, Inc. Fax: (617) 232-1064   
 mailto:cjmillerinformed-solutions.com 
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D and Sybase connectivity
  http://www.informed-solutions.com  

This message and any attached documents contain information which may be 
confidential, subject to privilege or exempt from disclosure under applicable 
law.  These materials are intended only for the use of the intended recipient. 
If you are not the intended recipient of this transmission, you are hereby 
notified that any distribution, disclosure, printing, copying, storage, 
modification or the taking of any action in reliance upon this transmission is 
strictly prohibited.  Delivery of this message to any person other than the 
intended recipient shall not compromise or waive such confidentiality, 
privilege or exemption from disclosure as to this communication. 

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: Bug in SMTP methods in 4D Internet Commands plugin

[Randy Engle via 4D_Tech]

Ben

I just tried this out with your code below.

Received both emails  including:  " Invalid subject containing changed by"

So...

Something else is hokey-pokey.

Randy Engle



-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of Ben Kershaw via 
4D_Tech
Sent: Thursday, February 7, 2019 8:06 AM
To: 4d_tech@lists.4d.com
Cc: Ben Kershaw <4d...@bonaire-diver.com>
Subject: Bug in SMTP methods in 4D Internet Commands plugin

I've discovered a bug in the 4D Internet Commands SMTP methods. If the message 
subject contains the text "changed by", there won't be any errors returned but 
the e-mail will not be sent.

I've tested it on the following versions, all running on macOS 10.13.6
   * 4D 16.3HF4 64-bit, 4D Internet Commands 16.3 build 16.224100
   * 4D 16.4 64-bit build 16.226553, 4D Internet Commands 16.4 build 16.226553
   * 4D 16.4 32-bit build 16.226553, 4D Internet Commands 16.4 build 16.226553
   * 4D 17.0 build 17.225365

I've also tested it running under Windows server.

I've tested it on different machines, using different SMTP servers, on 
different networks. Same result. I find it hard to believe that having "changed 
by" in the message subject would cause the e-mail to not be sent, but my 
testing shows otherwise. Still, I've enclosed a small method below, and I'd 
appreciate it if others could try it out and let everyone know the result 
(you'll need to set the variables for the STMP server, addresses, and 
username/password if your SMTP server needs authentication).

This is a weird one. I'm assuming it's caused by some old debugging code that 
was left in place, but who knows.

Thanks,
Ben Kershaw


C_TEXT($tSMTPServer;$tEMailFrom;$tEMailTo;$tUserName;$tPassword)
C_LONGINT($lSMTPServerPort;$lMessageID;$lError;$lArrayElement)

$tSMTPServer:=""
$lSMTPServerPort:=25
$tUserName:=""
$tPassword:=""

$tEMailFrom:=""
$tEMailTo:=""

ARRAY TEXT($atSubject;0)
APPEND TO ARRAY($atSubject;"Valid subject")  //This will work fine APPEND TO 
ARRAY($atSubject;"Invalid subject containing changed by")  //This won't return 
an error, but the e-mail won't be sent

For ($lArrayElement;1;Size of array($atSubject))
$lMessageID:=0
$lError:=SMTP_New ($lMessageID)
$lError:=SMTP_Host ($lMessageID;$tSMTPServer)
$lError:=SMTP_From ($lMessageID;$tEMailFrom)
$lError:=SMTP_Subject ($lMessageID;$atSubject{$lArrayElement})
$lError:=SMTP_Body ($lMessageID;"This is the message body";2)
$lError:=SMTP_To ($lMessageID;$tEMailTo)
If ($lSMTPServerPort#25)
$lError:=IT_SetPort (2;$lSMTPServerPort)
End if 
If ($tUserName#"")
$lError:=SMTP_Auth ($lMessageID;$tUserName;$tPassword)
End if 
$lError:=SMTP_Send ($lMessageID)
$lError:=SMTP_Clear ($lMessageID)
End for
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: Urgent! Port conflict - 4D Server

[Dennis, Neil via 4D_Tech]

> "Failed to launch DB4D Server. Please make sure that the port assigned to the 
> DB4D Server is not used by another application."

Ensure that no other version of 4D are running on the machine... as a service 
or as another user.


Neil












Privacy Disclaimer: This message contains confidential information and is 
intended only for the named addressee. If you are not the named addressee you 
should not disseminate, distribute or copy this email. Please delete this email 
from your system and notify the sender immediately by replying to this email.  
If you are not the intended recipient you are notified that disclosing, 
copying, distributing or taking any action in reliance on the contents of this 
information is strictly prohibited.

The Alternative Investments division of UMB Fund Services provides a full range 
of services to hedge funds, funds of funds and private equity funds.  Any tax 
advice in this communication is not intended to be used, and cannot be used, by 
a client or any other person or entity for the purpose of (a) avoiding 
penalties that may be imposed on any taxpayer or (b) promoting, marketing, or 
recommending to another party any matter addressed herein.
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: Urgent! Port conflict - 4D Server

[Stephen J. Orth via 4D_Tech]

David,

Is the system running as a service and you don't know it?


Steve

-Original Message-
From: 4D_Tech <4d_tech-boun...@lists.4d.com> On Behalf Of David Rose via 4D_Tech
Sent: Thursday, February 7, 2019 1:06 PM
To: 4d_tech@lists.4d.com
Cc: David Rose 
Subject: Urgent! Port conflict - 4D Server

On a Windows 7 box running 4D Server v15, I rebooted the computer today and 
found, when I restarted 4D Server and tried to open the database (or a brand 
new database), I get this error:
"Failed to launch DB4D Server. Please make sure that the port assigned to the 
DB4D Server is not used by another application." When I click Continue I get 
"Failed to create a listening socket."

I tried opening the database in 4D, but got a message asking if I wanted to 
open it in read only mode. If I say yes, I am not able to get into the design 
environment in order to get into Database Settings in order to try changing the 
port numbers for the application server, web server, SQL server.

I tried repairing both the structure and data files, trashing the 4D  and 4D 
Server Preferences files, and reinstalling 4D Server. No luck. I also user the 
Unlocker utility to check to see if the data files are falsely locked. They're 
not.

If you know of a solution to this problem, please email me directly:
drose...@gmail.com.

TIA,
David

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Urgent! Port conflict - 4D Server

[David Rose via 4D_Tech]

On a Windows 7 box running 4D Server v15, I rebooted the computer today and
found, when I restarted 4D Server and tried to open the database (or a
brand new database), I get this error:
"Failed to launch DB4D Server. Please make sure that the port assigned to
the DB4D Server is not used by another application." When I click Continue
I get "Failed to create a listening socket."

I tried opening the database in 4D, but got a message asking if I wanted to
open it in read only mode. If I say yes, I am not able to get into the
design environment in order to get into Database Settings in order to try
changing the port numbers for the application server, web server, SQL
server.

I tried repairing both the structure and data files, trashing the 4D  and
4D Server Preferences files, and reinstalling 4D Server. No luck. I also
user the Unlocker utility to check to see if the data files are falsely
locked. They're not.

If you know of a solution to this problem, please email me directly:
drose...@gmail.com.

TIA,
David


Virus-free.
www.avg.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Bug in SMTP methods in 4D Internet Commands plugin

[Ben Kershaw via 4D_Tech]

I've discovered a bug in the 4D Internet Commands SMTP methods. If the message 
subject contains the text "changed by", there won't be any errors returned but 
the e-mail will not be sent.

I've tested it on the following versions, all running on macOS 10.13.6
   * 4D 16.3HF4 64-bit, 4D Internet Commands 16.3 build 16.224100
   * 4D 16.4 64-bit build 16.226553, 4D Internet Commands 16.4 build 16.226553
   * 4D 16.4 32-bit build 16.226553, 4D Internet Commands 16.4 build 16.226553
   * 4D 17.0 build 17.225365

I've also tested it running under Windows server.

I've tested it on different machines, using different SMTP servers, on 
different networks. Same result. I find it hard to believe that having "changed 
by" in the message subject would cause the e-mail to not be sent, but my 
testing shows otherwise. Still, I've enclosed a small method below, and I'd 
appreciate it if others could try it out and let everyone know the result 
(you'll need to set the variables for the STMP server, addresses, and 
username/password if your SMTP server needs authentication).

This is a weird one. I'm assuming it's caused by some old debugging code that 
was left in place, but who knows.

Thanks,
Ben Kershaw


C_TEXT($tSMTPServer;$tEMailFrom;$tEMailTo;$tUserName;$tPassword)
C_LONGINT($lSMTPServerPort;$lMessageID;$lError;$lArrayElement)

$tSMTPServer:=""
$lSMTPServerPort:=25
$tUserName:=""
$tPassword:=""

$tEMailFrom:=""
$tEMailTo:=""

ARRAY TEXT($atSubject;0)
APPEND TO ARRAY($atSubject;"Valid subject")  //This will work fine
APPEND TO ARRAY($atSubject;"Invalid subject containing changed by")  //This 
won't return an error, but the e-mail won't be sent

For ($lArrayElement;1;Size of array($atSubject))
$lMessageID:=0
$lError:=SMTP_New ($lMessageID)
$lError:=SMTP_Host ($lMessageID;$tSMTPServer)
$lError:=SMTP_From ($lMessageID;$tEMailFrom)
$lError:=SMTP_Subject ($lMessageID;$atSubject{$lArrayElement})
$lError:=SMTP_Body ($lMessageID;"This is the message body";2)
$lError:=SMTP_To ($lMessageID;$tEMailTo)
If ($lSMTPServerPort#25)
$lError:=IT_SetPort (2;$lSMTPServerPort)
End if 
If ($tUserName#"")
$lError:=SMTP_Auth ($lMessageID;$tUserName;$tPassword)
End if 
$lError:=SMTP_Send ($lMessageID)
$lError:=SMTP_Clear ($lMessageID)
End for 
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Closing a window with another application in focus

[Chuck Miller via 4D_Tech]

You’re not kidding when running with built clients sometimes closes window 
using close box quits 4D on windows 7.

Regards

Chuck

 Chuck Miller Voice: (617) 739-0306
 Informed Solutions, Inc. Fax: (617) 232-1064   
 mailto:cjmillerinformed-solutions.com 
 Brookline, MA 02446 USA Registered 4D Developer
   Providers of 4D and Sybase connectivity
  http://www.informed-solutions.com  

This message and any attached documents contain information which may be 
confidential, subject to privilege or exempt from disclosure under applicable 
law.  These materials are intended only for the use of the intended recipient. 
If you are not the intended recipient of this transmission, you are hereby 
notified that any distribution, disclosure, printing, copying, storage, 
modification or the taking of any action in reliance upon this transmission is 
strictly prohibited.  Delivery of this message to any person other than the 
intended recipient shall not compromise or waive such confidentiality, 
privilege or exemption from disclosure as to this communication. 

> On Feb 7, 2019, at 8:00 AM, Jeffrey Kain via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> Kirk/Albert Brooks pointed me in the right direction -- if you open the 
> window with Open Form Window, then the behavior is just automatic. If you 
> open the window with Open Window, then you need to enable the On Close Box 
> event and write a handler for that event.  
> 
> 64-bit seems pickier/more consistent than 32-bit.

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: How to display read-only input form

[Arnaud de Montard via 4D_Tech]

> Le 6 févr. 2019 à 22:31, Jim Crate via 4D_Tech <4d_tech@lists.4d.com> a écrit 
> :
> 
> [...]
> I thought about using DIALOG, [...]

I would stop using legacy display commands (display/modify selection, 
add/modify record… maybe I forget some). IMHO 4D modern way to display a form 
is dialog, dialog or dialog. 

-- 
Arnaud de Montard 



**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: How to display read-only input form

[Chip Scheide via 4D_Tech]

Koen,
Nice -
I did not know that

Chip

On Thu, 7 Feb 2019 10:19:04 +0100, Koen Van Hooreweghe via 4D_Tech 
wrote:
> 
> If a field is set to focusable but not enterable, the user can't edit 
> the content, but will be able to select and copy.
---
Gas is for washing parts
Alcohol is for drinkin'
Nitromethane is for racing 
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: 4d-for-ios repo commit bonanza

[Mike Kerner via 4D_Tech]

Correction: l10n_develop is where the PR initiates from.  It might be nice
to squash a few of those.
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: 4d-for-ios repo commit bonanza

[Mike Kerner via 4D_Tech]

Develop.  Check the "New Crowdin Translations" PR - so far 2,847 commits.
It was updating multiple times per second.  It looks like it may have
finally stopped.

On Thu, Feb 7, 2019 at 9:39 AM Epperlein, Lutz (agendo) via 4D_Tech <
4d_tech@lists.4d.com> wrote:

> Do you mean https://github.com/4d/4d-for-ios ?
> Which branch?
>
>
> --
> Lutz Epperlein
> --
> Agendo Gesellschaft für politische Planung mbH
> Köpenicker Str. 9
> 10997 Berlin
> http://www.agendo.de/
> --
>
>
> **
> 4D Internet Users Group (4D iNUG)
> Archive:  http://lists.4d.com/archives.html
> Options: https://lists.4d.com/mailman/options/4d_tech
> Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
> **



-- 
On the first day, God created the heavens and the Earth
On the second day, God created the oceans.
On the third day, God put the animals on hold for a few hours,
   and did a little diving.
And God said, "This is good."
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

RE: 4d-for-ios repo commit bonanza

[Epperlein, Lutz (agendo) via 4D_Tech]

Do you mean https://github.com/4d/4d-for-ios ?
Which branch?


--  
Lutz Epperlein  
--
Agendo Gesellschaft für politische Planung mbH
Köpenicker Str. 9
10997 Berlin
http://www.agendo.de/
--


**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: 4d-for-ios repo commit bonanza

[Mike Kerner via 4D_Tech]

Wow, this is really bizarre.  Lots and lots of screenshots added to the
repo, one commit at a time.

On Thu, Feb 7, 2019 at 9:14 AM Mike Kerner 
wrote:

> Make that 1480
>
> On Thu, Feb 7, 2019 at 9:11 AM Mike Kerner 
> wrote:
>
>> is anyone else monitoring the 4d-for-ios repo?
>> I've gotten 1310 commit notifications in the last 10 minutes, and
>> counting, at the rate of 2-3/second.
>>
>> --
>> On the first day, God created the heavens and the Earth
>> On the second day, God created the oceans.
>> On the third day, God put the animals on hold for a few hours,
>>and did a little diving.
>> And God said, "This is good."
>>
>
>
> --
> On the first day, God created the heavens and the Earth
> On the second day, God created the oceans.
> On the third day, God put the animals on hold for a few hours,
>and did a little diving.
> And God said, "This is good."
>


-- 
On the first day, God created the heavens and the Earth
On the second day, God created the oceans.
On the third day, God put the animals on hold for a few hours,
   and did a little diving.
And God said, "This is good."
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: 4d-for-ios repo commit bonanza

[Mike Kerner via 4D_Tech]

Make that 1480

On Thu, Feb 7, 2019 at 9:11 AM Mike Kerner 
wrote:

> is anyone else monitoring the 4d-for-ios repo?
> I've gotten 1310 commit notifications in the last 10 minutes, and
> counting, at the rate of 2-3/second.
>
> --
> On the first day, God created the heavens and the Earth
> On the second day, God created the oceans.
> On the third day, God put the animals on hold for a few hours,
>and did a little diving.
> And God said, "This is good."
>


-- 
On the first day, God created the heavens and the Earth
On the second day, God created the oceans.
On the third day, God put the animals on hold for a few hours,
   and did a little diving.
And God said, "This is good."
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

4d-for-ios repo commit bonanza

[Mike Kerner via 4D_Tech]

is anyone else monitoring the 4d-for-ios repo?
I've gotten 1310 commit notifications in the last 10 minutes, and counting,
at the rate of 2-3/second.

-- 
On the first day, God created the heavens and the Earth
On the second day, God created the oceans.
On the third day, God put the animals on hold for a few hours,
   and did a little diving.
And God said, "This is good."
**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: Closing a window with another application in focus

[Jeffrey Kain via 4D_Tech]

Kirk/Albert Brooks pointed me in the right direction -- if you open the window 
with Open Form Window, then the behavior is just automatic. If you open the 
window with Open Window, then you need to enable the On Close Box event and 
write a handler for that event.  

64-bit seems pickier/more consistent than 32-bit.

> On Feb 7, 2019, at 2:19 AM, Bernd Fröhlich via 4D_Tech <4d_tech@lists.4d.com> 
> wrote:
> 
> I read about a a "click through" property (a long time ago and not connected 
> to 4D).
> If that is not set, then the first click into a window brings it to the front 
> and the second click has the desired outcome.
> If it is set, then one click does both.
> Not sure if that was per window or per program or if 4D even supports it.
> Maybe something to do with the window type (composite vs. non composite)?
> 
> Sorry, that may be not much help, but that´s all I remember.

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**

Re: How to display read-only input form

[Koen Van Hooreweghe via 4D_Tech]

Hi Jim,

Have you tried MODIFY SELECTION instead of MODIFY RECORD?
Set the table in read only mode, make sure only the requested record is in the 
current selection and then open the record using MODIFY SELECTION. Without the. 
optional * parameters, this command should open it immediately in the input 
form for a one record selection.
If I remember correctly, no lock alert will be shown.

Otherwise you might try to use an error handler to get rid of the alert.

If a field is set to focusable but not enterable, the user can't edit the 
content, but will be able to select and copy.

HTH
Koen

> Op 6 feb. 2019, om 22:31 heeft Jim Crate via 4D_Tech <4d_tech@lists.4d.com> 
> het volgende geschreven:
> 
> If I set the table to read only before loading the record, MODIFY RECORD just 
> shows an alert complaining that the record is locked, and doesn’t show the 
> input form. So I set the form fields to be not enterable, but while text can 
> be selected, it can’t be copied. 




Compass bvba
Koen Van Hooreweghe
Kloosterstraat 65
9910 Aalter
Belgium
tel +32 495 511.653

**
4D Internet Users Group (4D iNUG)
Archive:  http://lists.4d.com/archives.html
Options: https://lists.4d.com/mailman/options/4d_tech
Unsub:  mailto:4d_tech-unsubscr...@lists.4d.com
**