[c-nsp] dynamic global-vrf leaking
Hi group Iam looking for a feature can be used to route VPN internet traffic from global interface into VRF interface (or global and add VPN label) normaly , that is done using static route to perform global-vrf leaking but i'm looking for a more scalable and dynamic solution any ideas ? thanks --ibrahim ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] dynamic global-vrf leaking
also is there any feature supports dynamic export of VPN routes to global ? i knew the reverse exist (importing IPv4 routes into VRF) but i'm looking for the reverse On Tue, May 25, 2010 at 10:03 AM, Ibrahim Abo Zaid ibrahim.aboz...@gmail.com wrote: Hi group Iam looking for a feature can be used to route VPN internet traffic from global interface into VRF interface (or global and add VPN label) normaly , that is done using static route to perform global-vrf leaking but i'm looking for a more scalable and dynamic solution any ideas ? thanks --ibrahim ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] transporting STM1 over IP (CEoIP)
Miguel, Take a look here: http://www.cisco.com/en/US/prod/collateral/modules/ps6267/product_data_s heet0900aecd805bad23.html This is a SPA module that goes into the 7600 router, which would allow Circuit Emulation for STM1 links. Arie -Original Message- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Miguel Mata Sent: Tuesday, May 25, 2010 00:52 To: cisco-nsp@puck.nether.net Subject: [c-nsp] transporting STM1 over IP (CEoIP) is there a way (namely modules, chassis, etc) to transport an STM1 over IP with Cisco? I've only seen E1, ser or T1 over IP so far. Please bear with me. I'm new to Cisco so many question arises when I got to change technology. Thanks in advance. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Tracking config changes
Hi Mike, RANCID +1 Besides what has been said so far... Other alternatives to circumvent the problem. (If you still want to make sure that you did not forget to save your config ...) * On recent IOS, you can use EEM (Embedded Event Manager to trigger a write mem when running-config is different than startup-config. * On older platform, maybe the kron feature can be used to write mem Hope this help Cheers/ Fred Mike a écrit : Hi Gang, In my smallish network I am guilty sometimes of using cli to make cisco switch and router config changes, and sometimes I have been known to forget to 'wr mem' when I'm sure it's what I want. The reasons for this vary, but I want to be better than this disaster waiting for a power outage or other event to force a reset, losing something that could potentially be important that I may forget about later. I know there are approaches to this in larger envionments using config version control systems and such, but I think I want something simpler to at least notify me when/if I have a 'running config' that has been modified from the 'startup config' and not committed to nvram. One approach I might think of would be to poll the devices on my normal snmp schedule and include a check for the last date of configuration change. I could easilly throw an alert if it's been more than an hour since the last config change/write to memory, but I don't know which variables I would poll for that. A secondary idea might also be to download the configs and commit them to cvs anytime a change is detected, but some here might think this is backwards and that configs should only be uploaded? What do you other service provider folks do? Mike- ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Tracking config changes
Hello Mike, +1 for RANCID + SVN + DIFFED MAILS. Y. 2010/5/25 Frederic LOUI frederic.l...@renater.fr Hi Mike, RANCID +1 Besides what has been said so far... Other alternatives to circumvent the problem. (If you still want to make sure that you did not forget to save your config ...) * On recent IOS, you can use EEM (Embedded Event Manager to trigger a write mem when running-config is different than startup-config. * On older platform, maybe the kron feature can be used to write mem Hope this help Cheers/ Fred Mike a écrit : Hi Gang, In my smallish network I am guilty sometimes of using cli to make cisco switch and router config changes, and sometimes I have been known to forget to 'wr mem' when I'm sure it's what I want. The reasons for this vary, but I want to be better than this disaster waiting for a power outage or other event to force a reset, losing something that could potentially be important that I may forget about later. I know there are approaches to this in larger envionments using config version control systems and such, but I think I want something simpler to at least notify me when/if I have a 'running config' that has been modified from the 'startup config' and not committed to nvram. One approach I might think of would be to poll the devices on my normal snmp schedule and include a check for the last date of configuration change. I could easilly throw an alert if it's been more than an hour since the last config change/write to memory, but I don't know which variables I would poll for that. A secondary idea might also be to download the configs and commit them to cvs anytime a change is detected, but some here might think this is backwards and that configs should only be uploaded? What do you other service provider folks do? Mike- ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Youssef BENGELLOUN-ZAHR …… Ingénieur Réseaux et Télécoms Technopole de l'Aube en Champagne - BP 601 - 10901 TROYES Cedex 9 Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE Tel +33 (0) 825 000 720 Tel. direct +33 (0) 1 77 35 59 14 Tel. portable +33 (0) 6 22 42 63 80 Emaily...@720.fr …….www.720.fr ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Tracking config changes
If you have less than 20 devices. Cat Tools Freeware Edition is pretty good and it comes with a nice GUI that runs on Windows, you can schedule copy run starts and also get a report e-mailed to you of the differences in configuration. On 25/05/2010 11:30, Youssef Bengelloun-Zahr wrote: Hello Mike, +1 for RANCID + SVN + DIFFED MAILS. Y. 2010/5/25 Frederic LOUIfrederic.l...@renater.fr Hi Mike, RANCID +1 Besides what has been said so far... Other alternatives to circumvent the problem. (If you still want to make sure that you did not forget to save your config ...) * On recent IOS, you can use EEM (Embedded Event Manager to trigger a write mem when running-config is different than startup-config. * On older platform, maybe the kron feature can be used to write mem Hope this help Cheers/ Fred Mike a écrit : Hi Gang, In my smallish network I am guilty sometimes of using cli to make cisco switch and router config changes, and sometimes I have been known to forget to 'wr mem' when I'm sure it's what I want. The reasons for this vary, but I want to be better than this disaster waiting for a power outage or other event to force a reset, losing something that could potentially be important that I may forget about later. I know there are approaches to this in larger envionments using config version control systems and such, but I think I want something simpler to at least notify me when/if I have a 'running config' that has been modified from the 'startup config' and not committed to nvram. One approach I might think of would be to poll the devices on my normal snmp schedule and include a check for the last date of configuration change. I could easilly throw an alert if it's been more than an hour since the last config change/write to memory, but I don't know which variables I would poll for that. A secondary idea might also be to download the configs and commit them to cvs anytime a change is detected, but some here might think this is backwards and that configs should only be uploaded? What do you other service provider folks do? Mike- ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] BGP flapping session
We are an ISP and have many customer neighbor sessions on our router. One of my customers BGP sessions started flapping yesterday. The bridge we have to them has no errors or disconnects. So i debugged the bgp session and recieved the following. Also to note the customer router is a Juniper. FYI: i removed the IPs. ay 24 20:20:29.715: BGP: timer-wheel running slow by 1 ticks May 24 20:20:35.780: BGP: remote close May 24 20:20:35.780: BGP: -reset the session May 24 20:20:35.780: BGP: rcv message type 3, length (excl. header) 2 May 24 20:20:35.780: BGPNSF state: went from nsf_not_active to nsf_not_active May 24 20:20:35.780: BGP: went from Established to Idle May 24 20:20:35.780: %BGP-5-ADJCHANGE: neighbor Down Peer closed the session May 24 20:20:35.780: BGP: closing May 24 20:20:35.780: BGP: read request no-op May 24 20:20:39.530: BGP: read request no-op May 24 20:21:01.676: BGP: read request no-op May 24 20:21:10.878: BGP: went from Idle to Active May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) May 24 20:21:13.831: BGP: passive open to 64.119.159.185 May 24 20:21:13.831: BGP: went from Active to Idle May 24 20:21:13.839: BGP: went from Idle to Connect May 24 20:21:13.839: BGP: read request no-op May 24 20:21:13.839: BGP: rcv message type 1, length (excl. header) 36 May 24 20:21:13.839: BGP: rcv OPEN, version 4, holdtime 90 seconds May 24 20:21:13.839: BGP: went from Connect to OpenSent May 24 20:21:13.839: BGP: sending OPEN, version 4, my as: 19406, holdtime 180 seconds May 24 20:21:13.839: BGP: rcv OPEN w/ OPTION parameter len: 26 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 6 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 1, length 4 May 24 20:21:13.839: BGP: OPEN has MP_EXT CAP for afi/safi: 1/1 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 128, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(old) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 2, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(new) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 8 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 64, length 6 BGP: rcvd OPEN w/ remote AS 46324 May 24 20:21:13.848: BGP: went from OpenSent to OpenConfirm May 24 20:21:13.848: BGP: send message type 1, length (incl. header) 45 May 24 20:21:13.890: BGP: went from OpenConfirm to Established May 24 20:21:13.890: %BGP-5-ADJCHANGE: neighbor Up May 24 20:21:15.089: BGP_Router: unhandled major event code 128, minor 0 Any help would greatly be appreciated. Chris -- //CL ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] FlexOptic
Anybody have any experience with FlexOptic? Their website seems a little crazy: http://www.flexoptix.net But they claim to have an SFP/GBIC programmer, plus tunable optics, which is what interests me. -- Tim: ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] BGP flapping session
Chris, Have you checked connectivity to this customer; ping, traceroutes, etc. Customer's link could be saturated causing issues for BGP May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) the 28% leads me to be that it is possible there is some type of congestion which could be possibly the reason you are seeing flaps. Hope this helps Billy Chris Lane wrote: We are an ISP and have many customer neighbor sessions on our router. One of my customers BGP sessions started flapping yesterday. The bridge we have to them has no errors or disconnects. So i debugged the bgp session and recieved the following. Also to note the customer router is a Juniper. FYI: i removed the IPs. ay 24 20:20:29.715: BGP: timer-wheel running slow by 1 ticks May 24 20:20:35.780: BGP: remote close May 24 20:20:35.780: BGP: -reset the session May 24 20:20:35.780: BGP: rcv message type 3, length (excl. header) 2 May 24 20:20:35.780: BGPNSF state: went from nsf_not_active to nsf_not_active May 24 20:20:35.780: BGP: went from Established to Idle May 24 20:20:35.780: %BGP-5-ADJCHANGE: neighbor Down Peer closed the session May 24 20:20:35.780: BGP: closing May 24 20:20:35.780: BGP: read request no-op May 24 20:20:39.530: BGP: read request no-op May 24 20:21:01.676: BGP: read request no-op May 24 20:21:10.878: BGP: went from Idle to Active May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) May 24 20:21:13.831: BGP: passive open to 64.119.159.185 May 24 20:21:13.831: BGP: went from Active to Idle May 24 20:21:13.839: BGP: went from Idle to Connect May 24 20:21:13.839: BGP: read request no-op May 24 20:21:13.839: BGP: rcv message type 1, length (excl. header) 36 May 24 20:21:13.839: BGP: rcv OPEN, version 4, holdtime 90 seconds May 24 20:21:13.839: BGP: went from Connect to OpenSent May 24 20:21:13.839: BGP: sending OPEN, version 4, my as: 19406, holdtime 180 seconds May 24 20:21:13.839: BGP: rcv OPEN w/ OPTION parameter len: 26 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 6 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 1, length 4 May 24 20:21:13.839: BGP: OPEN has MP_EXT CAP for afi/safi: 1/1 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 128, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(old) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 2, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(new) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 8 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 64, length 6 BGP: rcvd OPEN w/ remote AS 46324 May 24 20:21:13.848: BGP: went from OpenSent to OpenConfirm May 24 20:21:13.848: BGP: send message type 1, length (incl. header) 45 May 24 20:21:13.890: BGP: went from OpenConfirm to Established May 24 20:21:13.890: %BGP-5-ADJCHANGE: neighbor Up May 24 20:21:15.089: BGP_Router: unhandled major event code 128, minor 0 Any help would greatly be appreciated. Chris ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] Cat6500 PM_SCP-SP-2-LCP_FW_ERR_INFORM Bus Asic #0 out of sync error
Hello, trying to determine if this is is an issue with the line card (WS-X6148-GE-TX) or the chassis (6509). Out of the blue once every 6 months or so we get: May 25 07:09:55.108 CDT: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 8 is experiencing the following error: Bus Asic #0 out of sync error May 25 07:10:13.107 CDT: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 8 is experiencing the following error: Bus Asic #0 out of sync error ... After ~5 minutes of the above errors the card shuts down: May 25 07:14:59.717 CDT: %LINK-3-UPDOWN: Interface GigabitEthernet8/4, changed state to down May 25 07:14:59.717 CDT: %LINK-3-UPDOWN: Interface GigabitEthernet8/8, changed state to down May 25 07:14:59.717 CDT: %LINK-3-UPDOWN: Interface GigabitEthernet8/10, changed state to down snip May 25 07:14:59.921 CDT: %HA_EM-6-LOG: Mandatory.go_intlpbk.tcl: GOLD EEM TCL policy for TestIntPortLoopback May 25 07:14:59.625 CDT: %CONST_DIAG-SP-6-HM_TEST_SP_INFO: TestIntPortLoopback[8]: last_busy_percent[23%], Tx_Rate[68730], Rx_Rate[10475] May 25 07:14:59.625 CDT: %CONST_DIAG-SP-2-HM_MOD_RESET: Resetting Module 8 for software recovery, Reason: Failed TestIntPortLoopback May 25 07:14:59.625 CDT: %OIR-SP-3-PWRCYCLE: Card in module 8, is being power-cycled 'off (Diagnostic Failure)' May 25 07:14:59.761 CDT: %C6KPWR-SP-4-DISABLED: power to module in slot 8 set off (Diagnostic Failure) At this point we have to re-seat the card. Currently running 12.2(33)SXI2a. Trying to determine which (or both) to replace- module or chassis. Thoughts? --Chris ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] BGP flapping session
I had an extended ping going to customer IP during our troubleshooting and i never lost a packet or had loss when the session went down. Customer states they have a Juniper with 768m memory and i was sending full routes. My hunch figured he had a memory issue so i shut down the Full route session and sent him a default but it the session still flapped. customer also states no errors on interface that we connect to him. Thanks for response. On Tue, May 25, 2010 at 9:06 AM, Billy Guthrie b...@billyguthrie.com wrote: Chris, Have you checked connectivity to this customer; ping, traceroutes, etc. Customer's link could be saturated causing issues for BGP May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) the 28% leads me to be that it is possible there is some type of congestion which could be possibly the reason you are seeing flaps. Hope this helps Billy Chris Lane wrote: We are an ISP and have many customer neighbor sessions on our router. One of my customers BGP sessions started flapping yesterday. The bridge we have to them has no errors or disconnects. So i debugged the bgp session and recieved the following. Also to note the customer router is a Juniper. FYI: i removed the IPs. ay 24 20:20:29.715: BGP: timer-wheel running slow by 1 ticks May 24 20:20:35.780: BGP: remote close May 24 20:20:35.780: BGP: -reset the session May 24 20:20:35.780: BGP: rcv message type 3, length (excl. header) 2 May 24 20:20:35.780: BGPNSF state: went from nsf_not_active to nsf_not_active May 24 20:20:35.780: BGP: went from Established to Idle May 24 20:20:35.780: %BGP-5-ADJCHANGE: neighbor Down Peer closed the session May 24 20:20:35.780: BGP: closing May 24 20:20:35.780: BGP: read request no-op May 24 20:20:39.530: BGP: read request no-op May 24 20:21:01.676: BGP: read request no-op May 24 20:21:10.878: BGP: went from Idle to Active May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) May 24 20:21:13.831: BGP: passive open to 64.119.159.185 May 24 20:21:13.831: BGP: went from Active to Idle May 24 20:21:13.839: BGP: went from Idle to Connect May 24 20:21:13.839: BGP: read request no-op May 24 20:21:13.839: BGP: rcv message type 1, length (excl. header) 36 May 24 20:21:13.839: BGP: rcv OPEN, version 4, holdtime 90 seconds May 24 20:21:13.839: BGP: went from Connect to OpenSent May 24 20:21:13.839: BGP: sending OPEN, version 4, my as: 19406, holdtime 180 seconds May 24 20:21:13.839: BGP: rcv OPEN w/ OPTION parameter len: 26 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 6 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 1, length 4 May 24 20:21:13.839: BGP: OPEN has MP_EXT CAP for afi/safi: 1/1 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 128, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(old) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 2, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(new) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 8 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 64, length 6 BGP: rcvd OPEN w/ remote AS 46324 May 24 20:21:13.848: BGP: went from OpenSent to OpenConfirm May 24 20:21:13.848: BGP: send message type 1, length (incl. header) 45 May 24 20:21:13.890: BGP: went from OpenConfirm to Established May 24 20:21:13.890: %BGP-5-ADJCHANGE: neighbor Up May 24 20:21:15.089: BGP_Router: unhandled major event code 128, minor 0 Any help would greatly be appreciated. Chris -- //CL ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Tracking config changes
Hello Mike, First of all: +1 to RANCID. Another aproach could be to use the IOS command 'archive'. Here's a few links: http://blogs.techrepublic.com.com/networking/?p=532 http://www.nil.com/ipcorner/RouterConfigArch/ http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gtconlog.html http://www.cisco.com/en/US/docs/ios/12_3t/12_3t4/feature/guide/gt_diff.html HTH, Mihaly In my smallish network I am guilty sometimes of using cli to make cisco switch and router config changes, and sometimes I have been known to forget to 'wr mem' when I'm sure it's what I want. The reasons for this vary, but I want to be better than this disaster waiting for a power outage or other event to force a reset, losing something that could potentially be important that I may forget about later. I know there are approaches to this in larger envionments using config version control systems and such, but I think I want something simpler to at least notify me when/if I have a 'running config' that has been modified from the 'startup config' and not committed to nvram. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Cisco Switch Packet Buffering Matrix?
Well, I assume someone from Cisco has seen this request. I don't have the time dicking around with vendors who won't willing give the information that is needed for pre-sales. So I will just look at Arista, Juniper and ProCurve... I hear they have a bunch of new kit to look at. ...Skeeve -- Skeeve Stevens, CEO/Technical Director eintellego Pty Ltd - The Networking Specialists ske...@eintellego.net / www.eintellego.net Phone: 1300 753 383, Fax: (+612) 8572 9954 Cell +61 (0)414 753 383 / skype://skeeve www.linkedin.com/in/skeeve ; facebook.com/eintellego -- NOC, NOC, who's there? -Original Message- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp- boun...@puck.nether.net] On Behalf Of Seth Mattinen Sent: Tuesday, 25 May 2010 2:15 PM To: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] Cisco Switch Packet Buffering Matrix? On 5/24/10 3:16 PM, Skeeve Stevens wrote: If it requires an NDA or me having to talk to Cisco to find out this basic information, then I will drop Cisco off the list for consideration as you rightly point out, the others all provide this detail upfront. How does Cisco expect us to sell them as a superior product against other vendors if the information is not available? You have to give them credit where it's due: Cisco is very good about providing all kinds of docs compared to, for example, Brocade. I could never imagine buying a Brocade product if I have to pay to read a manual. I'm really big on researching things myself. Cisco is not good at other things like disclosing the true capabilities of QoS on the 3560/3750 switches (as a downgrade from the 3550) and buffers. ~Seth ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] Apple Mac + iPhone = strange network loop?
I wonder if anybody else have seen this problem. In the past two weeks we've had two cases where a tethering between a MacBook and an iPhone have resulted in some strange loop on the network. It seems that the users have setup some kind of network connection sharing between the iPhone and the Mac. I don't know Macs well enough to know exactly how it works, but it looks like some NAT thing. It also looks like the Mac uses a wired connection and the iPhone uses a wireless connection to the same L2 network. On the gateways (running HSRP) we then see this: 002660: May 21 09:16:50.426 CEST: %HSRP-4-BADAUTH: Bad authentication from 10.100.0.134, group 22, remote state Standby It turns out this (10.100.0.134) is the IP address of the MacBook. Capturing the traffic, we can see that it is exactly the HSRP hellos, but just with the IP address replaced, a la NAT. Without HSRP authentication (we tried that too!) it actually steals the primary role, i.e. when it reflects the primary router's hello the two real routers assume a Standby role. It doesn't cause broadcast loops or anything, so it seems to only forward/bridge unicast packets. Apart from telling people not to connect their wonderful Apple devices in this way, what can we do? :-) -- Peter ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] Cisco 7206VXR (NPE-G2) SRD4
Hi all, We recently has tried to update IOs version on our Cisco router 7206VXR (NPE-G2) up to SRD4 12.2 (33). But we observed trouble with bgp process. Some sessions had not risen or got down with following notifications May 25 07:28:29 router.name.net 118: May 25 07:28:29: %BGP-5-ADJCHANGE: neighbor Down BGP Notification sent May 25 07:28:29 router.name.net 119: May 25 07:28:29: %BGP-3-NOTIFICATION: sent to neighbor ip-address 4/0 (hold time expired) 0 bytes May 25 07:28:30 router.name.net 120: May 25 07:28:29: %BGP_SESSION-5-ADJCHANGE: neighbor ip-address VPNv4 Unicast topology base removed from session BGP Notification sent May 25 07:28:31 router.name.net May 25 07:29:38: %BGP_SESSION-5-ADJCHANGE: neighbor ip-address VPNv4 Unicast topology base removed from session Unknown path error The dampening was disabled and some sessions were in a up status and not got down. So we have made rollback. But this is situation very unpleasant. I have found nothing on cisco.com Please help me, if anyone had something similar. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Cisco 7206VXR (NPE-G2) SRD4
On 25/05/2010 16:51, Anrey Teslenko wrote: Unknown path error Do you have a copy of the BGP configuration (removing the actual IP's) ? I have upgraded several devices to SRD4 and I am pretty happy with this software release. I am using IBGP/EBGP without any problems although I had yet to upgrade a NPE-G2 to SRD4. Did you grab any debug outputs at the time ? ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Apple Mac + iPhone = strange network loop?
On 5/25/10 8:28 AM, Peter Rathlev wrote: 002660: May 21 09:16:50.426 CEST: %HSRP-4-BADAUTH: Bad authentication from 10.100.0.134, group 22, remote state Standby It turns out this (10.100.0.134) is the IP address of the MacBook. Capturing the traffic, we can see that it is exactly the HSRP hellos, but just with the IP address replaced, a la NAT. Without HSRP authentication (we tried that too!) it actually steals the primary role, i.e. when it reflects the primary router's hello the two real routers assume a Standby role. It doesn't cause broadcast loops or anything, so it seems to only forward/bridge unicast packets. Apart from telling people not to connect their wonderful Apple devices in this way, what can we do? :-) Make sure that you use HSRP authentication everywhere. Have the Apple customers open bug reports with Apple, and suggest that they mention Cisco HSRP protocol conflict in their reports. Be prepared to wait a while for Apple to realize the issue, do regression testing, and roll it out in their next updates. -- Jay Hennigan - CCIE #7880 - Network Engineering - j...@impulse.net Impulse Internet Service - http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] IPv6 over GRE or IPv6IP tunneling on sup32
On Tuesday 25 May 2010 01:48:02 am Mikael Abrahamsson wrote: On Mon, 24 May 2010, Michael Ulitskiy wrote: Hello, Does anybody know if sup32/PFC3B support hardware forwarding of ipv6 over GRE or ipv6ip tunnels? IOS 12.2(33)SXH4. I can't find a definitive answer in cisco doc. I know tunnel mode gre runs in hardware, but I'm not sure if ipv6 on top of it will make any difference. Has anybody tried it? I know for a fact that tunnel mode ipv6ip is hw path on a Sup720 (if it's the only tunnel using that loopback IP as tunnel IP), so should be on sup32 as well? My understanding is that sup32 should be no differenct. Anyway it seems you're right. I've made the following little lab - Tu0 is IPv6 over GRE tunnel and Tu1 is IPv6IP. interface Tunnel0 no ip address load-interval 30 ipv6 address ::FFFE:1::1/64 ipv6 enable no snmp trap link-status tunnel source Loopback0 tunnel destination a.b.c.d ! interface Tunnel1 no ip address load-interval 30 ipv6 address ::FFFE:2::1/64 ipv6 enable no snmp trap link-status tunnel source Loopback1 tunnel destination a.b.c.d tunnel mode ipv6ip ! Here's what I see: CORE1#sh mls cef ipv6 Codes: + - Push label Index Prefix Adjacency ... 196864 ::FFFE:1::/64 punt 196866 ::FFFE:2::/64 Tu1 a.b.c.d ... GRE tunnel (Tu0) has punt adjacency, while ipv6ip tunnel has Tu1 adjacency. Also I've put some traffic on both tunnels and here's what I got: CORE1#sh int tu0 stats Tunnel0 Switching pathPkts In Chars In Pkts Out Chars Out Processor 3264 3408 Route cache 42125677980 27110 25666796 Distributed cache 101526065737 0 0 Total 14367 11743981 27113 25667204 CORE1#sh int tu1 stats Tunnel1 Switching pathPkts In Chars In Pkts Out Chars Out Processor 9 1078 58 5680 Route cache 0 0 0 0 Distributed cache 29935 29559402 21701 20714008 Total 29944 29560480 21759 20719688 Most ipv6 over GRE traffic is in route cache path, while most ipv6ip traffic in distributed cache. I'm not sure what the difference between them, but my guess is that route cache is software CEF, while distributed cache is PFC3. Am I right? Is there any better way to confirm it? Thanks, Michael ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Apple Mac + iPhone = strange network loop?
On Tue, 2010-05-25 at 12:15 -0400, Alex Moya wrote: Peter I do not believe that the mac is causing this issue unless there is some software running on the MAC that is telling it to create a HSRP session. I would look at that first. When we first saw it, we thought the Mac was deliberately trying something nasty, but when we talked to the user (and his IT guy) no-one could find anything wrong with the Mac. The only thing that stood out was the tethering. It doesn't seem to be HSRP-specific, since it simply replaces the IP address in the IPv4 header and nothing else. This might be a general multicast thing, I will try to test that. (Of course we don't have any Macs to test with, so we'll have to test on the live network. :-)) -- Peter ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] BGP flapping session
Wanted to close out issue, customer had a memory and broadcast issue from their Own customer. Thanks to all On Tue, May 25, 2010 at 9:30 AM, Chris Lane clane1...@gmail.com wrote: I had an extended ping going to customer IP during our troubleshooting and i never lost a packet or had loss when the session went down. Customer states they have a Juniper with 768m memory and i was sending full routes. My hunch figured he had a memory issue so i shut down the Full route session and sent him a default but it the session still flapped. customer also states no errors on interface that we connect to him. Thanks for response. On Tue, May 25, 2010 at 9:06 AM, Billy Guthrie b...@billyguthrie.comwrote: Chris, Have you checked connectivity to this customer; ping, traceroutes, etc. Customer's link could be saturated causing issues for BGP May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) the 28% leads me to be that it is possible there is some type of congestion which could be possibly the reason you are seeing flaps. Hope this helps Billy Chris Lane wrote: We are an ISP and have many customer neighbor sessions on our router. One of my customers BGP sessions started flapping yesterday. The bridge we have to them has no errors or disconnects. So i debugged the bgp session and recieved the following. Also to note the customer router is a Juniper. FYI: i removed the IPs. ay 24 20:20:29.715: BGP: timer-wheel running slow by 1 ticks May 24 20:20:35.780: BGP: remote close May 24 20:20:35.780: BGP: -reset the session May 24 20:20:35.780: BGP: rcv message type 3, length (excl. header) 2 May 24 20:20:35.780: BGPNSF state: went from nsf_not_active to nsf_not_active May 24 20:20:35.780: BGP: went from Established to Idle May 24 20:20:35.780: %BGP-5-ADJCHANGE: neighbor Down Peer closed the session May 24 20:20:35.780: BGP: closing May 24 20:20:35.780: BGP: read request no-op May 24 20:20:39.530: BGP: read request no-op May 24 20:21:01.676: BGP: read request no-op May 24 20:21:10.878: BGP: went from Idle to Active May 24 20:21:10.878: BGP: open active delayed 28655ms (35000ms max, 28% jitter) May 24 20:21:13.831: BGP: passive open to 64.119.159.185 May 24 20:21:13.831: BGP: went from Active to Idle May 24 20:21:13.839: BGP: went from Idle to Connect May 24 20:21:13.839: BGP: read request no-op May 24 20:21:13.839: BGP: rcv message type 1, length (excl. header) 36 May 24 20:21:13.839: BGP: rcv OPEN, version 4, holdtime 90 seconds May 24 20:21:13.839: BGP: went from Connect to OpenSent May 24 20:21:13.839: BGP: sending OPEN, version 4, my as: 19406, holdtime 180 seconds May 24 20:21:13.839: BGP: rcv OPEN w/ OPTION parameter len: 26 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 6 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 1, length 4 May 24 20:21:13.839: BGP: OPEN has MP_EXT CAP for afi/safi: 1/1 May 24 20:21:13.839: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.839: BGP: OPEN has CAPABILITY code: 128, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(old) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 2 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 2, length 0 May 24 20:21:13.848: BGP: OPEN has ROUTE-REFRESH capability(new) for all address-families May 24 20:21:13.848: BGP: rcvd OPEN w/ optional parameter type 2 (Capability) len 8 May 24 20:21:13.848: BGP: OPEN has CAPABILITY code: 64, length 6 BGP: rcvd OPEN w/ remote AS 46324 May 24 20:21:13.848: BGP: went from OpenSent to OpenConfirm May 24 20:21:13.848: BGP: send message type 1, length (incl. header) 45 May 24 20:21:13.890: BGP: went from OpenConfirm to Established May 24 20:21:13.890: %BGP-5-ADJCHANGE: neighbor Up May 24 20:21:15.089: BGP_Router: unhandled major event code 128, minor 0 Any help would greatly be appreciated. Chris -- //CL -- //CL ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] FlexOptic
On Tue, May 25, 2010 at 1:32 PM, Sascha Pollok nsp-l...@pollok.net wrote: they do. And they are crazy indeed :) Thomas held a presentation at DENOG1 about Flexoptics. A few slides are available from http://www.denog.de/meetings/denog1/agenda_en.html. Unfortunately in German. There is also an mp4 video clip of his presentation which was in English afair. I've been looking for an SFP/Optic reprogrammer, 'cos I'm tired of vendor lock. But this one appears to be license based, which means I'm trading one drug pusher for another... -- Tim: ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] FlexOptic
Hello Tim, Anybody have any experience with FlexOptic? Their website seems a little crazy: http://www.flexoptix.net But they claim to have an SFP/GBIC programmer, plus tunable optics, which is what interests me. they do. And they are crazy indeed :) Thomas held a presentation at DENOG1 about Flexoptics. A few slides are available from http://www.denog.de/meetings/denog1/agenda_en.html. Unfortunately in German. There is also an mp4 video clip of his presentation which was in English afair. Sascha ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] FlexOptic
On 25/05/2010 18:41, Tim Durack wrote: I've been looking for an SFP/Optic reprogrammer, 'cos I'm tired of vendor lock. But this one appears to be license based, which means I'm trading one drug pusher for another... The economics of this depend on the volume of transceivers you need to reprogram. Don't FlexOptics have an unlimited version? Yes, vendor locking is very tiresome. Nick ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] FlexOptic
On Tue, May 25, 2010 at 2:25 PM, Nick Hilliard n...@inex.ie wrote: On 25/05/2010 18:41, Tim Durack wrote: I've been looking for an SFP/Optic reprogrammer, 'cos I'm tired of vendor lock. But this one appears to be license based, which means I'm trading one drug pusher for another... The economics of this depend on the volume of transceivers you need to reprogram. Don't FlexOptics have an unlimited version? Doesn't look like it. They have a Professional Bundle: http://www.flexoptix.net/en/transceiver/flexbox/preise-sfp-configurator.html Yes, vendor locking is very tiresome. Indeed. I don't mind vendors making money. I do mind them needlessly limiting the tools I have available to deliver network services. What does MSA stand for again? (I know it only applies to equipment vendors, not their poor users.) -- Tim: ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] Cisco x64 IPSec VPN client
I don't think I saw anyone post this on the list but it looks like Cisco released 64bit version of IPSec VPN client that's not beta. vpnclient-winx64-msi-5.0.07.0290-k9.exe I think all of my clients who was forced to upgrade so they can use Anyconnect with their 64bit OS is going to be pissed. I am glad it came out, but why couldn't Cisco do this to begin with??? Grumble... ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] dynamic global-vrf leaking
You could use VRF's for all interfaces and RT import/export the routes between VRF's - even the 'global routes'. Use import-map's to control what routes make it into each VRF. You'll need to run MP-BGP to make it work. I basically do this where I work (different scenario but same concept). Kenny On Tue, May 25, 2010 at 12:08 AM, Ibrahim Abo Zaid ibrahim.aboz...@gmail.com wrote: also is there any feature supports dynamic export of VPN routes to global ? i knew the reverse exist (importing IPv4 routes into VRF) but i'm looking for the reverse On Tue, May 25, 2010 at 10:03 AM, Ibrahim Abo Zaid ibrahim.aboz...@gmail.com wrote: Hi group Iam looking for a feature can be used to route VPN internet traffic from global interface into VRF interface (or global and add VPN label) normaly , that is done using static route to perform global-vrf leaking but i'm looking for a more scalable and dynamic solution any ideas ? thanks --ibrahim ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] dynamic global-vrf leaking
Hello, +1, importing routes from global routing table using import-map under a vrf instance. Using it over here. Y. Le 25 mai 2010 à 22:07, Kenny Sallee kenny.sal...@gmail.com a écrit : You could use VRF's for all interfaces and RT import/export the routes between VRF's - even the 'global routes'. Use import-map's to control what routes make it into each VRF. You'll need to run MP-BGP to make it work. I basically do this where I work (different scenario but same concept). Kenny On Tue, May 25, 2010 at 12:08 AM, Ibrahim Abo Zaid ibrahim.aboz...@gmail.com wrote: also is there any feature supports dynamic export of VPN routes to global ? i knew the reverse exist (importing IPv4 routes into VRF) but i'm looking for the reverse On Tue, May 25, 2010 at 10:03 AM, Ibrahim Abo Zaid ibrahim.aboz...@gmail.com wrote: Hi group Iam looking for a feature can be used to route VPN internet traffic from global interface into VRF interface (or global and add VPN label) normaly , that is done using static route to perform global-vrf leaking but i'm looking for a more scalable and dynamic solution any ideas ? thanks --ibrahim ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] 12.4(15)T12 - 15.0M ATM ADSL PPPoE pre-clone removed, idle statistics no longer tracker, performance increases, and other undocumented improvements?
I just updated my 7201 from 12.4(15)T12 to 15.0M to resolve an issue with RIP. During the process, I've noticed a few changes: 1) (config)#virtual-template 2 pre-clone 500 % Command ignored (deprecated post 12.2S) Virtual-template pre-clone seems to be removed. It mentions version 12.2S, which doesn't seem relevant between 12.4T-15.0, but in either case it doesn't seem necessary. I reviewed the DSL broadband deployment guide, and indeed in 12.4T when I made the config it recommended using it. This section seems to be removed in the 15.0 version of the guide (although several sample configs within which have it remain). I found nothing in the release notes for 15.0 regarding this functionality change. Does anyone know if this was removed, why, and the impact of such? 2) PPPoE performance on an ATM DS3 seems greatly improved, at least for session establishment. I wasn't expecting this, but re-establishing 1,000 sessions went from a 45 second affair to a 15 second one. Were there some major change here? 3) PPPoE idle session statistics (show user) no longer are tracked. 4) Outbound flash RIP updates based on the loss of a connected network (metric 16 updates) targetted by a network statement get advertised to rip neighbors, ignoring a distribute list telling the router not to send updated about anything but a default route. I suspect #3 is a new bug (but better than the one I had before as metric 16 updates are essentially ignored) so I'll deal with it for now. Perhaps does anyone have any information regarding the significant PPPoE changes that occured and what they were -- or has anyone else experienced similar behavior with 15.0 as the issues shown above? I wish it was in the release notes, but it isn't. Thanks! ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] Tracking config changes
Could it possible to track special configuration line and generate summary report on monitored lines? e.g. want to track configuration on each device, and montor OSPF neighbor configuration every day 发件人: Mark Wheadon m...@currybeast.co.uk 主题: Re: [c-nsp] Tracking config changes 收件人: cisco-nsp@puck.nether.net 日期: 2010年5月25日,周二,下午6:51 If you have less than 20 devices. Cat Tools Freeware Edition is pretty good and it comes with a nice GUI that runs on Windows, you can schedule copy run starts and also get a report e-mailed to you of the differences in configuration. On 25/05/2010 11:30, Youssef Bengelloun-Zahr wrote: Hello Mike, +1 for RANCID + SVN + DIFFED MAILS. Y. 2010/5/25 Frederic LOUIfrederic.l...@renater.fr Hi Mike, RANCID +1 Besides what has been said so far... Other alternatives to circumvent the problem. (If you still want to make sure that you did not forget to save your config ...) * On recent IOS, you can use EEM (Embedded Event Manager to trigger a write mem when running-config is different than startup-config. * On older platform, maybe the kron feature can be used to write mem Hope this help Cheers/ Fred Mike a 閏rit : Hi Gang, In my smallish network I am guilty sometimes of using cli to make cisco switch and router config changes, and sometimes I have been known to forget to 'wr mem' when I'm sure it's what I want. The reasons for this vary, but I want to be better than this disaster waiting for a power outage or other event to force a reset, losing something that could potentially be important that I may forget about later. I know there are approaches to this in larger envionments using config version control systems and such, but I think I want something simpler to at least notify me when/if I have a 'running config' that has been modified from the 'startup config' and not committed to nvram. One approach I might think of would be to poll the devices on my normal snmp schedule and include a check for the last date of configuration change. I could easilly throw an alert if it's been more than an hour since the last config change/write to memory, but I don't know which variables I would poll for that. A secondary idea might also be to download the configs and commit them to cvs anytime a change is detected, but some here might think this is backwards and that configs should only be uploaded? What do you other service provider folks do? Mike- ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
[c-nsp] Fax support on AS5350
Hi all, How do I know does AS5350 support fax ? IOS version Cisco IOS Software, 5350 Software (C5350-IS-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3) Any help will be appreciated. Regards, Tseveen. ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
