Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
On Sat, Oct 25, 2008 at 12:20:00AM +0200, Bill Allombert wrote: Package: emacs-goodies-el Version: 29.3-2 Severity: serious Hello Peter, Upgrading from etch to lenny fails with Hi! I tried to reproduce this bug in a pristine chroot, and have the following observation: - Installing this package pulls in emacs21. - apt-get dist-upgrade then does the upgrade from emacs21 in Etch to the one in Lenny. Nowhere does it pull in emacs22. - I then installed emacs22, and faced no problems. - I finally also did apt-get --reinstall install emacs-goodies-el, and that also caused no problems. Could you please clarify the particular situation where you can reproduce this bug? Maybe I am missing something in my attempt to replicate this problem. Thanks. Kumar -- Kumar Appaiah signature.asc Description: Digital signature
Bug#503350: [INTL:sv] Swedish strings for tex-common debconf
On 25.10.08 Martin Bagge ([EMAIL PROTECTED]) wrote: Hi Martin, package: tex-common severity: wishlist tags: patch l10n Actually there is a swedish translation by Martin Agren (I guess that A should have a ° on top), last modified in July. I'm pretty sure it is up to date. Should we really replace it by your version? Thanks, Hilmar -- sigmentation fault -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503365: [INTL:ja] Update po-debconf template translation (ja.po)
Package: gksu Version: 2.0.0-5 Severity: wishlist Tags: patch l10n -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Dear gksu maintainer, Here's updated Japanese po-debconf template (ja.po) file. Could you apply it to debian/pos/ja.po, please? - -- Regards, Hideki Yamane henrich @ debian.or.jp http://wiki.debian.org/HidekiYamane -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkkCtVkACgkQIu0hy8THJkuZWgCfdoglFNeNMYrjNsE7cmic4RBb EIwAmwT3s5wS4lJ+n0b3m5CddktKsto8 =npvT -END PGP SIGNATURE- # Japanese translation for gksu. # Copyright (C) 2008 Debian GNOME Maintainers [EMAIL PROTECTED] # This file is distributed under the same license as the gksu package. # fujiwara [EMAIL PROTECTED], 2008 # msgid msgstr Project-Id-Version: gksu \n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2008-05-08 11:30+\n PO-Revision-Date: 2008-10-23 13:11+\n Last-Translator: Hideki Yamane (Debian-JP) [EMAIL PROTECTED]\n Language-Team: [EMAIL PROTECTED] MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Launchpad-Export-Date: 2008-10-22 14:04+\n X-Generator: Launchpad (build Unknown)\n #: ../gksu/gksu.c:76 #, c-format msgid GKsu version %s\n \n msgstr GKsu バージョン %s\n \n #: ../gksu/gksu.c:77 #, c-format msgid Usage: %s [-u user] [options] command\n \n msgstr 使い方: %s [-u ユーザー名] [オプション] コマンド\n \n #: ../gksu/gksu.c:78 msgid --debug, -d\n Print information on the screen that might be\n useful for diagnosing and/or solving problems.\n msgstr --debug, -d\n 問題の原因の究明ないし解決に役立つ情報を\n 画面に表示します。\n #: ../gksu/gksu.c:81 ../gksu/gksu.c:84 ../gksu/gksu.c:100 ../gksu/gksu.c:111 #: ../gksu/gksu.c:117 msgid \n msgstr \n #: ../gksu/gksu.c:82 msgid --user user, -u user\n Call command as the specified user.\n msgstr --user ユーザー名, -u ユーザー名\n 指定したユーザーで コマンド を実行します\n #: ../gksu/gksu.c:85 msgid --disable-grab, -g\n Disable the \locking\ of the keyboard, mouse,\n and focus done by the program when asking for\n password.\n msgstr --disable-grab, -g\n パスワードを尋ねる際に、プログラムによる\n キーボード、マウス、およびフォーカスの「ロック」を\n 無効にします。\n #: ../gksu/gksu.c:89 msgid --prompt, -P\n Ask the user if they want to have their keyboard\n and mouse grabbed before doing so.\n msgstr --prompt, -P\n キーボードとマウスを捕捉する前に、ユーザーに確認する。\n #: ../gksu/gksu.c:92 msgid --preserve-env, -k\n Preserve the current environments, does not set $HOME\n nor $PATH, for example.\n msgstr --preserve-env, -k\n 環境変数を変更しない。例えば $HOME や $PATH を\n 設定しない。\n #: ../gksu/gksu.c:95 msgid --login, -l\n Make this a login shell. Beware this may cause\n problems with the Xauthority magic. Run xhost\n to allow the target user to open windows on your\n display!\n msgstr --login, -l\n ログインシェルにする。これは Xauthority による認証に\n 問題を起こすかもしれないことに注意してください。対象\n ユーザーがあなたのディスプレイでウィンドウを開くこと\n を許可するには xhost を実行してください!\n #: ../gksu/gksu.c:101 msgid --description description|file, -D description|file\n Provide a descriptive name for the command to\n be used in the default message, making it nicer.\n You can also provide the absolute path for a\n .desktop file. The Name key for will be used in\n this case.\n msgstr --description 説明|ファイル, -D 説明|ファイル\n よりわかりやすいように、デフォルトメッセージとして\n 使われるコマンドの説明を指定します。\n .desktop ファイルの絶対パスを指定することも出来ます。\n この時、Name キーが説明として使われます。\n #: ../gksu/gksu.c:107 msgid --message message, -m message\n Replace the standard message shown to ask for\n password for the argument passed to the option.\n Only use this if --description does not suffice.\n msgstr --message メッセージ, -m メッセージ\n パスワードを尋ねるときに出てくる標準のメッセージを\n オプションに渡された引数で置き換えます。\n --description では不十分な時のみ使ってください。\n #: ../gksu/gksu.c:112 msgid --print-pass, -p\n Ask gksu to print the password to stdout, just\n like ssh-askpass. Useful to use in scripts with\n programs that accept receiving the password on\n stdin.\n msgstr --print-pass, -p\n ssh-askpass のように、gksu がパスワードを標準出力に\n 出すようにします。パスワードを標準入力から受け付ける\n プログラムをスクリプトで使うときに便利です。\n #: ../gksu/gksu.c:118 msgid --sudo-mode, -S\n Make GKSu use sudo instead of su, as if it had been\n run as \gksudo\.\n msgstr --sudo-mode, -S\n gksudo として実行されたかのように、gksu が\n su の代わりにsudo を使うようにします。\n #: ../gksu/gksu.c:121 msgid --su-mode, -w\n Make GKSu use su, instead of using libgksu's\n default.\n msgstr --su-mode, -w\n libgksu のデフォルトを使用する代わりに、\n gksu が su を使うようにします。\n #: ../gksu/gksu.c:124 msgid --always-ask-pass\n Make GKSu always ask for a password, even if it is cached\n by sudo.\n msgstr --always-ask-pass\n sudo がパスワードをキャッシュしていても、\n gksu が常にパスワードを尋ねるようにします。\n #: ../gksu/gksu.c:235 msgid Advanced options msgstr 拡張オプション #: ../gksu/gksu.c:251 msgid bOptions to use when changing user/b msgstr bユーザ変更時に使用するオプション/b #. login shell?
Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
On 2008-10-25 07:58 +0200, Kumar Appaiah wrote: On Sat, Oct 25, 2008 at 12:20:00AM +0200, Bill Allombert wrote: Package: emacs-goodies-el Version: 29.3-2 Severity: serious Hello Peter, Upgrading from etch to lenny fails with Hi! I tried to reproduce this bug in a pristine chroot, and have the following observation: - Installing this package pulls in emacs21. - apt-get dist-upgrade then does the upgrade from emacs21 in Etch to the one in Lenny. Nowhere does it pull in emacs22. Install the `emacs' metapackage in etch, this will pull in emacs22 in lenny. - I then installed emacs22, and faced no problems. - I finally also did apt-get --reinstall install emacs-goodies-el, and that also caused no problems. Could you please clarify the particular situation where you can reproduce this bug? Maybe I am missing something in my attempt to replicate this problem. Remove packages providing mail-transport-agent and mailx from the chroot first. BTW, this problem is not limited to upgrades, it will also happen in new installs, provided that neither /usr/sbin/sendmail nor /usr/bin/mail exist. Regards, Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#491938: Patch for the 0.2a-3.1 NMU of bindgraph
Quoting Christian Perrier ([EMAIL PROTECTED]): OK. Do you have time to upload before my NMU enters the archive or would you profer some time and then I remove my upload to DELAYED. If you upload today, my NMU will then just be REJECTed when it reaches 0-day...but of course, you might be too busy for that and need more time. Just let me know. Hmmm, well, I forgot to remove the package from the DELAYED queue and I'm afraid it finally got uploaded. Sorry for this. I'll ask for unblock so that it enters testing. signature.asc Description: Digital signature
Bug#429059: Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
On 2008-10-25 00:20 +0200, Bill Allombert wrote: Package: emacs-goodies-el Version: 29.3-2 Severity: serious Hello Peter, Upgrading from etch to lenny fails with Setting up emacs22 (22.2+2-4) ... emacs-install emacs22 install/cedet-common: Handling install for emacsen flavor emacs22 Loading /etc/emacs/site-start.d/00debian-vars.el (source)... No /etc/mailname. Reverting to default... Loading /etc/emacs/site-start.d/50cedet-common.el (source)... Loading /etc/emacs/site-start.d/50chess.el (source)... Loading /usr/share/emacs/site-lisp/chess/chess-auto.el (source)... Loading /etc/emacs/site-start.d/50emacs-goodies-el.el (source)... Package emacs-goodies-el not fully installed. Skipping setup. Loading /etc/emacs/site-start.d/50emacs-intl-fonts.el (source)... Loading /etc/emacs/site-start.d/50emacs-jabber.el (source)... Loading /etc/emacs/site-start.d/50emacs-wiki.el (source)... Loading /etc/emacs/site-start.d/51speedbar.el (source)... Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-autogen.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-compat.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-edebug.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-load.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/ezimage.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/fame.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/inversion.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/mode-local.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/pprint.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/sformat.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/working.elc install/emacs-goodies-el: Handling emacs22, logged in /tmp/elc_cdQaPI.log emacs-install: /usr/lib/emacsen-common/packages/install/emacs-goodies-el emacs22 emacs21 failed at /usr/lib/emacsen-common/emacs-install line 28, TSORT line 8. dpkg: error processing emacs22 (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: emacs22 E: Sub-process /usr/bin/dpkg returned an error code (1) The file /tmp/elc_cdQaPI.log is in attachement. The relevant message in that file seems to be this one: In toplevel form: silly-mail.el:86:1:Error: /usr/bin/mail is not executable That is the same problem as in #502762, triggered by a Debian-specific patch that lets sendmail.el throw an error if neither sendmail nor /usr/bin/mail can be found, first reported and discussed in #429059. Since a sensible solution had already been proposed in #429059, I'm inclined to throw all these bugs together and assign them to the emacs22 package. Opinions? Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#489943: [tex-live] Bug#489943: texlive-base-bin: mktexpk does not work in directories containing spaces
On 09.07.08 Karl Berry ([EMAIL PROTECTED]) wrote: Hi all, I'm just doing a full quote. The submitter requested some changes. One was accepted but upstream, the others not. Jan, is this fine with you. Can we mark that bug fixed in upstream and close it as soon as that single change hits Debian? Thanks, Hilmar Thanks for the report, but ... However I also noticed use of echo+sed dirname replacement (with comment can't rely on dirname -- basename was relied on on the next line though), Well, that's because basename can be relied on :). which would have problems with spaces at the end (backquote expansion eats them) and backslashes in some shells (the rules for backslash processing in echo differ from shell to shell). So my patch additionally includes I am not surprised that there are failures with names containing spaces, let alone backslashes. And since we want to move away from shell scripts in general (- texlua, so we can run the same code on Windows), I doubt it's worth anyone's time to do a in-depth exegesis of all the failures. -PKDESTDIR=`echo $PKDEST | sed 's%/[^/][^/]*$%%'` # can't rely on dirname I am not aware of any way to improve on the portability of this construct. POSIX is certainly not the answer. Something to take up on the autoconf list if you really want to. -cd $PKDESTDIR || exit 1 +cd $PKDESTDIR || exit 1 That change was already made. -- sigmentation fault -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#498965: Reproducibility of the hal selinux bug
Do you have the dbus module loaded? Run semodule -l|grep dbus. bounty:/home/eddy# semodule -l|grep dbus dbus1.9.0 What AVC messages do you get when you fail to start hal? Weird. In syslog I get this when I invoke-rc.d dbus restart Oct 25 09:38:33 bounty hidd[5687]: Exit Oct 25 09:38:33 bounty avahi-daemon[6128]: Found user 'avahi' (UID 104) and group 'avahi' (GID 105). Oct 25 09:38:33 bounty avahi-daemon[6128]: Successfully dropped root privileges. Oct 25 09:38:33 bounty avahi-daemon[6128]: avahi-daemon 0.6.22 starting up. Oct 25 09:38:33 bounty avahi-daemon[6128]: dbus_bus_get_private(): An SELinux policy prevents this sender from sending this message to this recipient (rejected message had interface org.freedesktop.DBus member Hello error name (unset) destination org.freedesktop.DBus) Oct 25 09:38:33 bounty avahi-daemon[6128]: WARNING: Failed to contact D-Bus daemon. Oct 25 09:38:33 bounty hcid[6225]: Bluetooth HCI daemon Oct 25 09:38:33 bounty hidd[6229]: Bluetooth HID daemon Oct 25 09:38:33 bounty hcid[6225]: Parsing /etc/bluetooth/main.conf failed: No such file or directory Oct 25 09:38:33 bounty hcid[6225]: Unable to get on D-Bus Oct 25 09:38:43 bounty dbus: avc: denied { send_msg } for msgtype=method_call interface=org.freedesktop.DBus member=Hello dest=org.freedesktop.DBus spid=4232 scontext=system_u:system_r:xdm_xserver_t:s0-s0:c0.c1023 tcontext=unconfined_u:unconfined_r:unconfined_t:s0 tclass=dbus but when I run this, I don't see anything in syslog: bounty:/home/eddy# hald --daemon=no --verbose=yes 09:39:11.353 [I] hald.c:669: hal 0.5.11 09:39:11.354 [I] hald.c:734: Will not daemonize 09:39:11.354 [I] hald_dbus.c:5381: local server is listening at unix:abstract=/var/run/hald/dbus-BYc2pAZZJP,guid=71422d16a44301d8345cbf754902bf0f 09:39:11.355 [E] hald_dbus.c:5747: dbus_bus_get(): An SELinux policy prevents this sender from sending this message to this recipient (rejected message had interface org.freedesktop.DBus member Hello error name (unset) destination org.freedesktop.DBus) -- Regards, EddyP = Imagination is more important than knowledge A.Einstein -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503366: sn: [INTL:it] Italian translation of the debconf templates
Package: sn Severity: wishlist Tags: l10n patch Enclosed please find the Italian translation of the Debconf template. Best regards vince # ITALIAN TRANSLATION OF SN'S.PO-DEBCONF FILE # Copyright (C) 2006 THE SN'S COPYRIGHT HOLDER # This file is distributed under the same license as the sn package. # # Stefano Canepa [EMAIL PROTECTED] and Vincenzo Campanella [EMAIL PROTECTED], 2008. msgid msgstr Project-Id-Version: it\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-08-19 22:07+0200\n PO-Revision-Date: 2008-10-20 11:51+0200\n Last-Translators: Stefano Canepa [EMAIL PROTECTED] and Vincenzo Campanella [EMAIL PROTECTED]\n Language-Team: Italian [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n X-Generator: KBabel 1.11.4\n #. Type: select #. Choices #: ../sn.templates:1001 msgid cron, ip-up, manually msgstr cron, ip-up, manually #. Type: select #. Description #: ../sn.templates:1002 msgid sn should run from: msgstr sn deve essere eseguito da: #. Type: select #. Description #: ../sn.templates:1002 msgid The scripts provided with the package support several ways to run snget (the program to fetch new news): msgstr Gli script forniti con il pacchetto supportano molti modi di esecuzione di snget (il programma che preleva le nuove notizie): #. Type: select #. Description #: ../sn.templates:1002 msgid cron -- The program will be executed daily by cron -- useful e.g\n for permanent connections;\n ip-up-- The program will called from ip-up, that is, when your\n computer makes a connection -- useful for e.g. dialup\n connections;\n manually -- The program will never be called, you have to call it\n manually to get new news (just type snget as root). msgstr - «cron»: il programma sarà eseguito ogni giorno da cron. Utile in\n particolare per connessioni permanenti\n - «ip-up»:il programma sarà chiamato da ip-up, cioè quando il sistema\n effettua una connessione. Utile in particolare per connessioni\n di tipo «dial-up»\n - «manually»: il programma non sarà mai chiamato e dovrà essere eseguito\n manualmente per prendere nuove notizie (digitando «snget»\n come root) #. Type: boolean #. Description #: ../sn.templates:2001 msgid Should sn only accept connections from localhost? msgstr sn deve accettare connessioni solo da localhost? #. Type: boolean #. Description #: ../sn.templates:2001 msgid sn is a small newsserver, intended mainly to be run for single user systems. On such systems, it's better to have sn only answer connections from localhost. If you intend to use sn from multiple machines, refuse here. msgstr sn è un piccolo server per notizie destinato principalmente per sistemi monoutente. Su tali sistemi è meglio impostare sn per rispondere solo a chiamate da localhost. Se si intende usare sn da più sistemi, rifiutare questa scelta.
Bug#503367: plink: file conflict with putty-tools
Package: plink Version: 1.03p1-1 Severity: serious The /usr/bin/plink name is already taken: , | # aptitude install plink | [...] | Selecting previously deselected package plink. | (Reading database ... 134796 files and directories currently installed.) | Unpacking plink (from .../plink_1.03p1-1_i386.deb) ... | dpkg: error processing /var/cache/apt/archives/plink_1.03p1-1_i386.deb (--unpack): | trying to overwrite `/usr/bin/plink', which is also in package putty-tools | dpkg-deb: subprocess paste killed by signal (Broken pipe) | Errors were encountered while processing: | /var/cache/apt/archives/plink_1.03p1-1_i386.deb | E: Sub-process /usr/bin/dpkg returned an error code (1) ` -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26.7-core2 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
On Sat, Oct 25, 2008 at 08:15:48AM +0200, Sven Joachim wrote: - apt-get dist-upgrade then does the upgrade from emacs21 in Etch to the one in Lenny. Nowhere does it pull in emacs22. Install the `emacs' metapackage in etch, this will pull in emacs22 in lenny. Sorry for missing this. - I then installed emacs22, and faced no problems. - I finally also did apt-get --reinstall install emacs-goodies-el, and that also caused no problems. Could you please clarify the particular situation where you can reproduce this bug? Maybe I am missing something in my attempt to replicate this problem. Remove packages providing mail-transport-agent and mailx from the chroot first. BTW, this problem is not limited to upgrades, it will also happen in new installs, provided that neither /usr/sbin/sendmail nor /usr/bin/mail exist. Thanks for the description. Would this be related to #502762, which also occurs for a similar reason? Kumar -- Kumar Appaiah signature.asc Description: Digital signature
Bug#500462: flickrfs: cannot edit meta data files
On Sun, 19 Oct 2008 20:22:41 -0400 Varun Hiremath [EMAIL PROTECTED] wrote: On Sun, 28 Sep, 2008 at 09:51:51PM +0800, clayton wrote: Package: flickrfs Version: 1.3.9.1-8 Man page states that I can edit .*meta files with an editor. If I try, I get a Permission Denied error. Similarly if I try to copy the meta data files to my desktop, I get a cp: cannot open `../flickr/sets/myset/.photoname.jpg.meta' for reading: Invalid argument Sorry, I can't reproduce this bug. I can easily edit/move *.meta files on my system. I guess there is some problem with the permissions on your system. Could you please try to reproduce this again? Hi Varun, It still seems to be broken on my system. Here is a little more verbose description of the situation for you: [EMAIL PROTECTED]:~/flickrfs/sets/ Hanoi$ cp .traffic_2.jpg.meta ~/test.meta cp: cannot open `.traffic_2.jpg.meta' for reading: Invalid argument [EMAIL PROTECTED]:~/flickrfs/sets/ Hanoi$ ll .traffic_* -rw-r--r-- 1 ckoen ckoen 0 2008-10-25 14:35 .traffic_1.jpg.meta -rw-r--r-- 1 ckoen ckoen 0 2008-10-25 14:35 .traffic_2.jpg.meta -rw-r--r-- 1 ckoen ckoen 0 2008-10-25 14:35 .traffic_3.jpg.meta -rw-r--r-- 1 ckoen ckoen 0 2008-10-25 14:35 .traffic_4.jpg.meta -rw-r--r-- 1 ckoen ckoen 0 2008-10-25 14:35 .traffic_5.jpg.meta If I try to rename that Hanoi directory to get rid of the leading space, it just ignores me and does not even bother with an error message. If I try to cp a local file into a different directory on flickr, I also get an error: [EMAIL PROTECTED]:~/flickrfs/sets/Thailand$ cp ~/tempphoto/hangzhouhead.jpg . cp: writing `./hangzhouhead.jpg': Input/output error Clayton -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503337: Bug present in unstable but not in testing
From what I read in the bug log and what I remember from the history of uswsusp, this RC bug is *not* present in testing. Testing has a 0.7-1.2 version which does not have the config change described by Tim Dijkstra in the bug log. As a consequence, I think we can safely decide that the following should be sent to [EMAIL PROTECTED]: notfound 503337 0.7-1.2 found 503337 0.8-1 thanks This way, the bug should no longer be listed in the list of RC affecting bith lenny and unstable: http://bts.turmzimmer.net/details.php?bydist=bothsortby=packagesignhinted=onignclaimed=onignpending=onigncontrib=onignnonfree=onignbritney=onignotherfixed=onnew=7refresh=1800 Are there any objections? -- signature.asc Description: Digital signature
Bug#455325: wicd, are you going to be the maintainer?
Hi David I noticed that wicd has been uploaded to debian now. Is it your intention to be the maintainer from this point forward? My own availability is a little limited so I am very happy it has found a maintainer. Do I need to do anything to help? If it is not your intention to be the maintainer, let me know and I'll push it up my priority stack. Regards, Steve -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503368: RFP: XPontus XML Editor
Package: wnpp Severity: wishlist *** Please type your report below this line *** Hi all, Please package X Pontus XML Editor http://xpontus.sourceforge.net/ Requirements :- JRE 5 or later License :- GNU GPL Developer: Yves Zoundi -- System Information: Debian Release: lenny/sid APT prefers intrepid-updates APT policy: (500, 'intrepid-updates'), (500, 'intrepid-security'), (500, 'intrepid-backports'), (500, 'intrepid') Architecture: i386 (i686) Kernel: Linux 2.6.27-7-generic (SMP w/1 CPU core) Locale: LANG=en_IN, LC_CTYPE=en_IN (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- Regards, Shirish Agarwal This email is licensed under http://creativecommons.org/licenses/by-nc/3.0/ 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
On 2008-10-25 08:46 +0200, Kumar Appaiah wrote: On Sat, Oct 25, 2008 at 08:15:48AM +0200, Sven Joachim wrote: - apt-get dist-upgrade then does the upgrade from emacs21 in Etch to the one in Lenny. Nowhere does it pull in emacs22. Install the `emacs' metapackage in etch, this will pull in emacs22 in lenny. Sorry for missing this. - I then installed emacs22, and faced no problems. - I finally also did apt-get --reinstall install emacs-goodies-el, and that also caused no problems. Could you please clarify the particular situation where you can reproduce this bug? Maybe I am missing something in my attempt to replicate this problem. Remove packages providing mail-transport-agent and mailx from the chroot first. BTW, this problem is not limited to upgrades, it will also happen in new installs, provided that neither /usr/sbin/sendmail nor /usr/bin/mail exist. Thanks for the description. Would this be related to #502762, which also occurs for a similar reason? Yes, I have already written a follow-up¹ to #503340, sorry that I forgot to CC you in that mail. Cheers, Sven ¹ http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=503340#25 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503194: emacs22-gtk: can not start without Monospace-8
On 2008-10-24 15:57 +0200, picca wrote: Le Thu, 23 Oct 2008 18:17:47 +0200, Sven Joachim [EMAIL PROTECTED] a écrit : Most likely you (or somebody helpfully for you) have set Emacs.font via X resources. What does xrdb -query | grep -i emacs print? Check ~/.Xdefaults and/or ~/.Xresources if you get matches. the xrdb query gives me: Emacs*font: Monospace-8 it was in my .Xresources so after an `xrdb -remove Emacs*font` every things went fine. Thanks I think you can close this bug as a workaround exist. I think it is still a bug to exit instead of trying a fallback font if the desired font could not be loaded. Compare that with xterm's behavior: , | % xterm -fn 'Monospace-8' | [1] 5982 | % xterm: unable to open font Monospace-8, trying fixed | | % emacs22 -fn 'Monospace-8' | [2] 5987 | % No fonts match `Monospace-8' | | [2] + 5987 done emacs22 -fn 'Monospace-8' | % ` Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503101: [pkg-cryptsetup-devel] Bug#503101: cryptsetup: Cryptsetup kills wireless
package cryptsetup severity 503101 normal thanks On 25/10/2008 Michael Pobega wrote: On Sat, Oct 25, 2008 at 01:06:47AM +0200, Jonas Meurer wrote: On 22/10/2008 Jonas Meurer wrote: I doubt that cryptsetup really stops your wireless from working. Instead, something else might have changed since you last recreated the initramfs file that causes this bug. What happens if you simply remove cryptsetup and regenerate the initramfs file afterwards? Is it possible to reproduce the bug over and over again (i.e: install cryptsetup - system is broken. remove cryptsetup - system works. install cryptsetup - system is broken. remove cryptsetup ...) any news about the bug? I'm absolutely sure that your wifi troubles don't have anything to do with cryptsetup. Please provide more information. Unfortunately I'm unable to reproduce the bug, as I've no hardware with wireless hardware. I think the problem lies in HAL. When I keep the device activated it works fine, but if I use my hotkey (Fn+F2) the device refuses to reload, dmesg reports that the device didn't respond properly and couldn't be loaded. So did you test whether removing cryptsetup fixes the bug? Or does it appear with any new created initramfs file no mind whether cryptsetup ist installed or not? Please try to apt-get remove cryptsetup and make sure that the initramfs is recreated. On the other hand the functionality of your hotkey should not depend on the initramfs as long as you don't want to use the hotkey early in the boot process. I feel that I put this bug in the wrong place, I'll bring it up with madwifi when I get the chance, I'm sorry for wasting your time. No problem, better to report it against the wrong package than not to report it at all. Please try to debug it further to find out which package it belongs to. For now I simply lowered the severity to normal as we're in the last phase of lenny release process, and release-critical bugs delay the release even more. If you're confident that this bug is release-critical and thus needs to be fixed for lenny, you'll have to do further debugging, reasign it to the correct package, append more information about how to reproduce it and then raise the severity again. greetings, jonas signature.asc Description: Digital signature
Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
found 503340 26.12-1 notfound 503340 29.3-2 close 503340 27.1-1 thanks On 2008-10-25 08:25 +0200, Sven Joachim wrote: On 2008-10-25 00:20 +0200, Bill Allombert wrote: Package: emacs-goodies-el Version: 29.3-2 Severity: serious Hello Peter, Upgrading from etch to lenny fails with Setting up emacs22 (22.2+2-4) ... emacs-install emacs22 install/cedet-common: Handling install for emacsen flavor emacs22 Loading /etc/emacs/site-start.d/00debian-vars.el (source)... No /etc/mailname. Reverting to default... Loading /etc/emacs/site-start.d/50cedet-common.el (source)... Loading /etc/emacs/site-start.d/50chess.el (source)... Loading /usr/share/emacs/site-lisp/chess/chess-auto.el (source)... Loading /etc/emacs/site-start.d/50emacs-goodies-el.el (source)... Package emacs-goodies-el not fully installed. Skipping setup. Loading /etc/emacs/site-start.d/50emacs-intl-fonts.el (source)... Loading /etc/emacs/site-start.d/50emacs-jabber.el (source)... Loading /etc/emacs/site-start.d/50emacs-wiki.el (source)... Loading /etc/emacs/site-start.d/51speedbar.el (source)... Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-autogen.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-compat.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-edebug.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet-load.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/cedet.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/ezimage.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/fame.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/inversion.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/mode-local.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/pprint.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/sformat.elc Wrote /usr/share/emacs22/site-lisp/cedet-common/working.elc install/emacs-goodies-el: Handling emacs22, logged in /tmp/elc_cdQaPI.log emacs-install: /usr/lib/emacsen-common/packages/install/emacs-goodies-el emacs22 emacs21 failed at /usr/lib/emacsen-common/emacs-install line 28, TSORT line 8. dpkg: error processing emacs22 (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: emacs22 E: Sub-process /usr/bin/dpkg returned an error code (1) The file /tmp/elc_cdQaPI.log is in attachement. The relevant message in that file seems to be this one: In toplevel form: silly-mail.el:86:1:Error: /usr/bin/mail is not executable This is the same bug as #434104, which has been fixed in version 27.1-1 of emacs-goodies-el, thus I'm closing the bug. However, unless #429059 will be fixed in lenny, the emacs22 packages might need to declare a conflict with old versions of emacs-goodies-el to prevent the error on upgrades. Cheers, Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#415996: [Qemu-devel] [PATCH] Re: option to have qemu chroot() into the target filesystem
On 10/25/08, Rob Landley [EMAIL PROTECTED] wrote: On Friday 24 October 2008 04:21:29 Bernhard Reutner-Fischer wrote: A patch was in this thread: http://www.mail-archive.com/[EMAIL PROTECTED]/msg16297.html Rob promised to respin it tomorrow and resend it in to the list. thanks The debian bug report in question is: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=415996 I checked and the old patch still applies cleanly (well, with an offset, but no fuzz). I applied it and then did an svn diff, the result of which is attached. (As with all svn diffs, it applies with patch -p0 -i blah.patch) It's actually a very simple patch, which does this: A) Teach qemu-$TARGET to do a chdir() plus chroot() in response to a -chroot command line option. B) Because A) requires root access, teach qemu-$TARGET to change uid and gid via a -su option (and set both the real and effective user IDs so it's actually dropping priviledges). Because the UID change happens at argument parse stage, doesn't the chrooting fail if the -su option is specified in the command line before -chroot? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#482032: Regress for Lenny?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi, I just hit this bug last week (I'm running Sid), and after reading through all of this, I regressed this package to the version in etch. This didn't cause any other apparent problems with other packages, and the DVDs written were then readable under Windows. Is it worth simply regressing this package for the lenny release or are a lot of other issues dependant on the new version? Thanks, CT. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkkC1xkACgkQ0SwfPjLnaZZdsACggMA/grrcw9h9wvomcbNnH4nm UtEAoNF/RqbLyFTOqzWq/v2tv9mwNb4d =hviX -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429059: Bug#502762: Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
On Sat Oct 25 08:25, Sven Joachim wrote: The relevant message in that file seems to be this one: In toplevel form: silly-mail.el:86:1:Error: /usr/bin/mail is not executable That is the same problem as in #502762, triggered by a Debian-specific patch that lets sendmail.el throw an error if neither sendmail nor /usr/bin/mail can be found, first reported and discussed in #429059. Since a sensible solution had already been proposed in #429059, I'm inclined to throw all these bugs together and assign them to the emacs22 package. Opinions? Sounds good. Given there's a solution we should try and get it uploaded quickly. Explicitly adding Rob to the CC to get input. I'm happy to upload an NMU, do the whole NMU or leave it to Rob, but doing one of those three soon would be good (-: Matt -- Matthew Johnson signature.asc Description: Digital signature
Bug#503356: retrying file
Hello Martin, thanks for translation! Please also fill 'Plural-Forms' header in translation (through msginit or manually), and then I will include your translation. -- Eugene V. Lyubimkin aka JackYF, Ukrainian C++ developer. signature.asc Description: OpenPGP digital signature
Bug#502858: here's a patch
Quoting Thijs Kinkhorst ([EMAIL PROTECTED]): tags 502858 patch thanks Hi Daniel, Here's a patch to fix this, please include it in the next Aptitude upload. Thanks. I'm building an NMU right now and will upload it to t-p-u unless Daniel objects very soon. signature.asc Description: Digital signature
Bug#502704: [Pkg-acpi-devel] Bug#502704: Bug#502704: Bug#502704: acpid is
On Fri, Oct 24, 2008, Derrick Karpo wrote: In looking at the /etc/init.d/acpid script from Ubuntu it appears to solve many of the modprobe issues that I am seeing. It checks to ensure the modules exist before loading them and won't attempt to load modules twice. Perhaps it's worth merging chunks of their load_modules() into the Debian script. The Ubuntu script is essentially a previous version of the Debian script; it calls in many commands, triggers many file reads, both of these slowing the boot, and is generally quite odd. Please, let's find out why the new Debian script doesn't work for you and we'll do Debian and Ubuntu some good. -- Loïc Minier -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503350: [INTL:sv] Swedish strings for tex-common debconf
On Sat, 25 Oct 2008, Hilmar Preusse wrote: On 25.10.08 Martin Bagge ([EMAIL PROTECTED]) wrote: Hi Martin, package: tex-common severity: wishlist tags: patch l10n Actually there is a swedish translation by Martin Agren (I guess that A should have a ° on top), last modified in July. I'm pretty sure it is up to date. Should we really replace it by your version? oh. I must have missed that in the list then. According to http://www.debian.org/intl/l10n/po-debconf/sv and unarchived bugs in BTS it was msising. Sorry but that. #491426 is indeed all right. -- /brother http://frakalendern.se When Bruce Schneier pre-computes S-box tables, he does it dynamically from the key... over breakfast. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503345: locale= mount option, hal and ntfs-3g
Hello Michael, Go ahead with a NMU. It'll be faster and I really think this bug should be fixed asap. Thanks for having a look and fixing this issue ! Regards, Adam. Michael Biebl a écrit : Package: ntfs-3g Version: 1:1.2531-1 Severity: important Hi Adam, I'm part of the Debian pkg-utopia team which maintains hal. A recent bug report [1] against hal, brought to our attention, that mounting ntfs volumes from within KDE is broken, so potentially quite a few users are affected. You can read the details on the bug report [1] or at the discussion I started on the hal mailing list [2]. In short, it's about hal offering the locale= option for ntfs file systems, while the kernel fs driver does not support the locale= option. There are attempts to fix this in a more sophisticated way withing hal, which will also require updates to the mount tools of KDE and GNOME, but this is not doable for lenny. A proposed short term solution, is to remove the locale= option from /usr/share/hal/fdi/policy/10osvendor/20-storage-methods.fdi and make the ntfs-3g package ship a fdi file, which adds the locale= option back and overrides the fstype to be ntfs-3g, i.e. if ntfs-3g is installed, hal will always use ntfs-3g when mounting ntfs volumes, which imo is an acceptable compromise and I'd like to get this fix into lenny. This requires, that the ntfs-3g package installs a file, like the one I've attached, to /usr/share/hal/fdi/policy/10osvendor/ As soon as you have updated the ntfs-3g to include this file, I'd upload an updated hal version, which removes the locale= option from 20-storage-methods.fdi and ask for freeze exceptions for lenny for both hal and ntfs-3g. If you are too busy, I'd offer to NMU ntfs-3g, if you grant me the permission to do it. Cheers, Michael [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=497463 [2] http://lists.freedesktop.org/archives/hal/2008-October/012329.html -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable'), (300, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.27.3 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages ntfs-3g depends on: ii libc6 2.7-15 GNU C Library: Shared libraries ii libntfs-3g31 1:1.2531-1 ntfs-3g filesystem in userspace (F ntfs-3g recommends no packages. ntfs-3g suggests no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#497262: Anything?
Hi, Is anything happening with this bug? It's rather distressing to see that I spent two full days debugging this only to see no response to it at all in over two months... -- Lo-lan-do Home is where you have to wash the dishes. -- #debian-devel, Freenode, 2004-09-22 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#422800: Sometimes fails when dragging and dropping a message from one folder to another
Hi Josselin, Le jeudi 23 octobre 2008 à 11:33 +0200, Josselin Mouette a écrit : reassign 422800 evolution-data-server 1.10.1-2 found 422800 2.22.3-1 tag 422800 + patch thanks According to upstream, this bug should be fixed by applying the attached patch, but it would require testing. Could you try applying this patch to evolution-data-server, upgrading it and check whether it is fixed? Even without applying this patch, I was not able to reproduce the problem with the current version in sid. Cheers, Julien -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500020: Announce of the upcoming NMU for the cacti-spine package
Dear maintainer of cacti-spine and Debian translators, Some days ago, I sent a notice to the maintainer of the cacti-spine Debian package, mentioning the status of at least one old po-debconf translation update in the BTS. I announced the intent to build and possibly upload a non-maintainer upload for this package in order to fix this long-time pending localization bug as well as all other pending translations. The package maintainer agreed for the NMU or did not respond in two weeks, so I will proceed with the NMU. The full planned schedule is available at the end of this mail. The package is currently translated to: cs de es eu fr nl pt pt2 pt_BR ru sv vi Among these, the following translations are incomplete: cs es nl pt_BR If you did any of the, currently incomplete, translations you will get ANOTHER mail with the translation to update. Other translators also have the opportunity to create new translations for this package. Once completed, please send them as a bug report against the cacti-spine package so I can incorporate them in the build. The deadline for receiving updates and new translations is Friday, October 31, 2008. If you are not in time you can always send your translation to the BTS. The POT file is attached to this mail. If the maintainer objects to this process I will immediately abort my NMU and send him/her all updates I receive. Otherwise the following will happen (or already has): Friday, October 24, 2008 : send the first intent to NMU notice to the package maintainer. Saturday, October 25, 2008 : send this notice Friday, October 31, 2008 : (midnight) deadline for receiving translation updates Saturday, November 01, 2008 : build the package and upload it to DELAYED/2-day send the NMU patch to the BTS Monday, November 03, 2008 : NMU uploaded to incoming Thanks for your efforts and time. -- -- # SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR [EMAIL PROTECTED], YEAR. # #, fuzzy msgid msgstr Project-Id-Version: PACKAGE VERSION\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2007-10-24 21:14+0200\n PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n Last-Translator: FULL NAME [EMAIL PROTECTED]\n Language-Team: LANGUAGE [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=CHARSET\n Content-Transfer-Encoding: 8bit\n #. Type: note #. Description #: ../templates:1001 msgid cacti must be configured to use spine! msgstr #. Type: note #. Description #: ../templates:1001 msgid In order to use the spine poller, cacti must be configured via its web based interface. Even if you have previously configured cacti to use spine via debconf, you must now perform this step via the web based control panel. For instructions on how to do this, please read /usr/share/doc/cacti-spine/ README.Debian. msgstr signature.asc Description: Digital signature
Bug#503356: retrying file
On Sat, 25 Oct 2008, Eugene V. Lyubimkin wrote: Hello Martin, thanks for translation! Please also fill 'Plural-Forms' header in translation (through msginit or manually), and then I will include your translation. new stuff for me but using msginit -i daptup.po -o sv.po -l sv_SE ended me with something that looks all right. -- /brother http://frakalendern.se If Bruce Schneier wants your plaintext, he'll just squeeze it out of the ciphertext using his barehands# translation of daptup.po to swedish # Copyright (C) 2008 Eugene V. Lyubimkin # This file is distributed under the same license as the PACKAGE package. # # Martin Bagge [EMAIL PROTECTED], 2008. msgid msgstr Project-Id-Version: daptup\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2008-10-19 11:24+0300\n PO-Revision-Date: 2008-10-25 10:50+0200\n Last-Translator: brother [EMAIL PROTECTED]\n Language-Team: Swedish\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n Plural-Forms: nplurals=2; plural=(n != 1);\n X-Generator: KBabel 1.11.4\n #: daptup:66 #, sh-format msgid Cannot read configuration from '$DAPTUP_CONFFILE'. msgstr kan inte läsa inställningar från '$DAPTUP_CONFFILE'. #: daptup:74 msgid You cannot mix '--pre', '--post' and '--last' options or repeat them. msgstr Du kan inte blanda alternativen '--pre', '--post' och '--last', ej heller upprepa dem. #: daptup:98 #, sh-format msgid Usage: $BASENAME [ --pre | --post | --last ] [ -h | --help | --nocolor ]. msgstr Användning: $BASENAME [ --pre | --post | --last ] [ -h | --help | -- nocolor ]. #: daptup:100 msgid daptup runs 'apt-get update' command inside and outputs: msgstr daptup kör kommandot 'aptitude update' och skriver ut: #: daptup:101 msgid - list of packages recently entered to repo; msgstr lista över paket som nyligen lagts till idatalagret; #: daptup:102 msgid - list of packages which got new updates; msgstr - lista över paket med uppdateringar; #: daptup:103 msgid - list of changes in 'watched' packages; msgstr - lista över förändringar i bevakade paket; #: daptup:104 msgid - list of outdated packages (optionally). msgstr - lista över föråldrade paket (valbart). #: daptup:106 msgid Options: msgstr Alternativ: #: daptup:107 msgid -h, --help: output this help and exit msgstr -h, --help: visar denna hjälptext #: daptup:108 msgid --nocolor: do not use colored output msgstr --nocolor: undviker färg vid utskrift #: daptup:109 msgid --pre: do only 'pre' stage: collect info that will be used as 'old' msgstr --pre: utför bara förstadiet, samlar in information om gamla paket #: daptup:110 msgid --post: do only 'post' stage: collect 'new' info and output changes msgstr --post: gör bara slutstadiet, samlar in information om nya paket och skriver ut förändringarna #: daptup:111 msgid if appropriate option is not disabled in config file msgstr om alternativet 'appropriate' inte avaktiverats #: daptup:112 msgid --last: only output last changes msgstr --last: skriver bara ut förädndringar sedan förra körningen #: daptup:117 #, sh-format msgid Unknown param: $PARAM msgstr Okänd parameter: $PARAM #: daptup:128 msgid You must run daptup with root privileges. msgstr Daptup måste köras med root-behörighet. #: daptup:217 #, sh-format msgid warning: cannot find any changelog for package '$package' msgstr varning: kunde inte hitta någon förändringshistorik för paketet '$package' #: daptup:236 msgid day msgid_plural days msgstr[0] dag msgstr[1] dagar #: daptup:240 #, sh-format msgid error: cannot extract last modification date for package '$package' msgstr fel: kunde inte hämta datum för senaste förändringar av paketet '$package' #: daptup:243 #, sh-format msgid error: cannot fetch last entry from changelog for package '$package' msgstr fel: kan inte läsa sista inlägget i förändringshistoriken för paketet '$package' #: daptup:251 msgid [done] msgstr [klar] #: daptup:272 msgid Building old list of packages... msgstr Skapar lista över gamla paket... #: daptup:277 msgid errors present. Is apt/dpkg running? msgstr fel uppstod. Körs apt/dpkg? #: daptup:282 msgid Building old list of available updates... msgstr Skapar lista för gamla paket med tillgängliga uppdateringar... #: daptup:286 msgid Building old list of watched packages... msgstr Skapar lista för gamla paket som är bevakade... #: daptup:295 msgid Building new list of packages... msgstr Skapar lista med nya paket... #: daptup:299 msgid Building new list of available updates... msgstr Skapar lista för nya paket med tillgängliga uppdateringar... #: daptup:303 msgid Building new list of watched packages... msgstr Skapar lista för nya paket som är bevakade... #: daptup:322 msgid Building list of outdated packages... msgstr Skapar lista för föråldrade paket... #: daptup:327 msgid error: DAPTUP_MINIMAL_DAY_COUNT_TREATING_OUTDATED contains non-numeric data
Bug#503369: [INTL:sv] Swedish strings for xmame debconf
package: xmame severity: wishlist tags: l10n patch please add the attached po-file to package. -- /brother http://frakalendern.se A vigenere cipher with the Key BRUCESCHNEIER is in fact unbreakable.# Translators, if you are not familiar with the PO format, gettext # documentation is worth reading, especially sections dedicated to # this format, e.g. by running: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # Some information specific to po-debconf are available at # /usr/share/doc/po-debconf/README-trans # or http://www.debian.org/intl/l10n/po-debconf/README-trans # Developers do not need to manually edit POT or PO files. # , fuzzy # # msgid msgstr Project-Id-Version: xmame 0.100-1\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2008-10-21 08:54-0300\n PO-Revision-Date: 2008-10-25 03:36+0100\n Last-Translator: Martin Bagge [EMAIL PROTECTED]\n Language-Team: Swedish [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=iso-8859-1\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../xmame-x.templates:1001 msgid Do you want /usr/games/xmame.x11 to be installed SUID root? msgstr Vill du att /usr/games/xmame.x11 ska installeras som SUID root? #. Type: boolean #. Description #: ../xmame-x.templates:1001 msgid You have the option of installing xmame.x11 with the SUID bit set. msgstr Du har möjligheten att installera xmame.x11 med SUID-biten satt. #. Type: boolean #. Description #: ../xmame-x.templates:1001 msgid If you make xmame.x11 SUID (i.e privileged), you can use the DGA extension of your X server, which is currently the fastest fullscreen method for xmame. This could, however, potentially allow xmame to be used during a security attack on your computer. If you are playing network games it is recommended that you decline. Otherwise, select this option and enjoy fullscreen games. If you change your mind later, you can run: dpkg-reconfigure xmame-x. msgstr Om du sätter xmame.x11 SUID (alltså priviligerad), kan du använda DGA utökningen i din X-server vilket för närvarande är den snabbaste metoden för fullskärmsläge till xmame. Detta gör tyvärr att möjligheten för säkerhetsproblem blir större. Om du spelar nätverksspel rekommenderas det att du inte använder denna metod. Om du bara spelar lokalt, välj då detta och njut av dina spel i fullskärm. Om du skulle ändra dig senare kan du köra: dpkg-reconfigure xmame-x. #. Type: boolean #. Description #: ../xmess-x.templates:1001 msgid Do you want /usr/games/xmess.x11 to be installed SUID root? msgstr Vill du att /usr/games/xmess.x11 ska installeras som SUID root? #. Type: boolean #. Description #: ../xmess-x.templates:1001 msgid You have the option of installing xmess.x11 with the SUID bit set. msgstr Du har möjligheten att installera xmess.x11 med SUID-biten satt. #. Type: boolean #. Description #: ../xmess-x.templates:1001 msgid If you make xmess SUID (i.e privileged), you can use the DGA extension of your X server, which is currently the fastest fullscreeen method for xmess. This could, however, potentially allow xmess to be used during a security attack on your computer. If you are playing network games, it is recommended that you decline. Otherwise, accept and enjoy fullscreen games. If you change your mind later, you can run: dpkg-reconfigure xmess-x. msgstr Om du sätter xmess SUID (alltså priviligerad), kan du använda DGA utökningen i din X-server vilket för närvarande är den snabbaste metoden för fullskärmsläge till xmess. Detta gör tyvärr att möjligheten för säkerhetsproblem blir större. Om du spelar nätverksspel rekommenderas det att du inte använder denna metod. Om du bara spelar lokalt, välj då detta och njut av dina spel i fullskärm. Om du skulle ändra dig senare kan du köra: dpkg-reconfigure xmess-x.
Bug#503370: freevo: Missing source encoding declaration in debconf.py
Package: freevo Version: 1.8.1-2 Severity: important Tags: l10n The generated /etc/freevo/debconf.py doesn't have any source encoding declaration: this becomes an issue when Freevo is installed in a French environment, since debconf.py will contain some non-ascii accents in the VIDEO_ITEMS, AUDIO_ITEMS and IMAGE_ITEMS lines. Python 2.5 doesn't accept debconf.py as a valid input any more, which prevents Freevo from starting at all. The bug was quite tricky to track down, since running freevo --trace start just returns, without any error message. Adding the line: # -*- coding: utf-8 -*- at the top of the generated debconf.py made my Freevo happy. (Well almost, Freevo now starts, but the accents in the directory labels are not properly displayed). -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (60, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages freevo depends on: ii adduser 3.110add and remove users and groups ii console-tools 1:0.2.3dbs-65.1 Linux console and font utilities ii debconf 1.5.22 Debian configuration management sy ii freevo-data 1.8.1-2 Themes and non-application data fo ii lsdvd 0.16-3 read the content info of a DVD ii mplayer-nogui [ 1:1.0.rc2svn20080706-0.1 The Ultimate Movie Player For Linu ii python 2.5.2-2 An interactive high-level object-o ii python-central 0.6.8register and build utility for Pyt ii python-freevo 1.8.1-2 Python modules for Freevo Versions of packages freevo recommends: ii cdparanoia 3.10.0+debian-1 audio extraction tool for sampling ii libxmltv-perl 0.5.52-1 Perl libraries related to the XMLT ii xine-ui 0.99.5+cvs20070914-2 the xine video player, user interf ii xmltv-util 0.5.52-1 Utilities related to the XMLTV fil Versions of packages freevo suggests: pn fbset none (no description available) pn fbxine none (no description available) pn flacnone (no description available) pn lamenone (no description available) ii libdvdcss2 1.2.10-0.2 Simple foundation for reading DVDs pn matrox-toolsnone (no description available) ii mencoder1:1.0.rc2svn20080706-0.1 MPlayer's Movie Encoder pn nvram-wakeupnone (no description available) pn ttf-liberation none (no description available) pn vorbis-toolsnone (no description available) -- debconf information: freevo/path_to_recordings: /home/freevo/recordings * freevo/display: x11 * freevo/start_on_boot: freevo/path_to_audio: /home/freevo/audio freevo/path_to_image: /home/freevo/image * freevo/norm: pal freevo/path_to_video: /home/freevo/video freevo/title_image: Répertoire des images * freevo/chanlist: france freevo/title_video: Répertoire vidéo * freevo/services: xserver, recordserver, encodingserver * freevo/geometry: 800x600 freevo/title_audio: Répertoire audio -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#489943: [tex-live] Bug#489943: texlive-base-bin: mktexpk does not work in directories containing spaces
On Sat, Oct 25, 2008 at 08:27:28 +0200, Hilmar Preusse wrote: On 09.07.08 Karl Berry ([EMAIL PROTECTED]) wrote: Hi all, I'm just doing a full quote. The submitter requested some changes. One was accepted but upstream, the others not. Jan, is this fine with you. Can we mark that bug fixed in upstream and close it as soon as that single change hits Debian? Thanks, Hilmar Yes. The other change is a clean-up for rare cases and if there is some supported shell that does not support ${var%pattern} and ${var#pattern} substitutions, than I guess there's nothing that can be done with that case. So I think it can be closed when the change accepted upstream hits debian. Thanks, Jan [This is the more important change:] -cd $PKDESTDIR || exit 1 +cd $PKDESTDIR || exit 1 That change was already made. -- Jan 'Bulb' Hudec [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503359: Processed: Re: Bug#503359: di-netboot-assistant should be able to run as a non-privileged user
Hello Daniel, Daniel Kahn Gillmor wrote: di-netboot-assistant should be able to run as a non-privileged user. Agree. (as it was on my TODO list ;) My primary implementation idea was to make the folders owned by the group staff (like /usr/local). Would that fit your need ? I wonder why you defined DI_NETBOOT_ASSISTANT_CONFIG. Do you need to be able to use multiple configuration dir ? or would it be fine to use ~/.di-netboot-assistant.conf (then fall back to /etc/... ) Thank you for your contribution. Franklin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503367: [Debian-med-packaging] Bug#503367: plink: file conflict with putty-tools
Le Sat, Oct 25, 2008 at 08:40:59AM +0200, Sven Joachim a écrit : Package: plink Version: 1.03p1-1 Severity: serious The /usr/bin/plink name is already taken: , | # aptitude install plink | [...] | Selecting previously deselected package plink. | (Reading database ... 134796 files and directories currently installed.) | Unpacking plink (from .../plink_1.03p1-1_i386.deb) ... | dpkg: error processing /var/cache/apt/archives/plink_1.03p1-1_i386.deb (--unpack): | trying to overwrite `/usr/bin/plink', which is also in package putty-tools | dpkg-deb: subprocess paste killed by signal (Broken pipe) | Errors were encountered while processing: | /var/cache/apt/archives/plink_1.03p1-1_i386.deb | E: Sub-process /usr/bin/dpkg returned an error code (1) ` Hi Sven, thank you for reporting this bug. Both programs are intended for command line, and could be used in scripts. We may even find users who want to install both at the same time. Very annoying… Since Plink is younger than Putty, I think that the burden of the renaming is for us (the Debian Med packaging team). I plan to rename /usr/bin/plink to /usr/bin/Plink, that would be a symbolic link to /usr/lib/plink/plink so that with an appropriate PATH, users can rescue their scripts. But before doing so, I would like to ask the readers of debian-devel: - if it is not a bad idea to have to programs whose name only differs by case (do we support file systems à la Macintosh?), - if they have a better idea in general. Have a nice day. (By the way, are you interested in genetics ?) -- Charles Plessy Debian Med packaging team, Tsurumi, Kanagawa, Japan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#501125: Japanese IM?
Hello, https://help.ubuntu.com/community/Japanese_Input_and_Fonts_in_Ubuntu_7.10 Now I uninstalled all the relevant packages and reinstalled them. but I'm experiencing the same problem after upgrading to Ubuntu Intrepid, qt4 version 4.4.3-0ubuntu1. I suspect some Ubuntu customization is to blame. I'm not sure that you are using Debian given what you have said so far in this bug report (quoted above). As you see from the version number, Ubuntu is not even basing their qt4-x11 packaging on Debian's 4.4.3-1. Please clarify what and which package versions you are using. The reinstallation put back libuiminputcontextplugin.so and caused the QT apps to fail again. Removing libuiminputcontextplugin.so again allowed QT apps to run again. To add insult to injury, the Japanese IM doesn't actually work anymore. That's pretty much expected. I think Japanese IM client relies on libuiminputcontextplugin.so and you got it removed, so it does not work. -- Modestas Vainius [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part.
Bug#487748: Patch for the 1.0.13p-3.3 NMU of chdrv
Dear maintainer of chdrv, On Saturday, October 18, 2008 I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues, after an initial notice sent on Monday, October 13, 2008. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/2-DAY. The NMU patch is attached to this mail. The NMU changelog is: Source: chdrv Version: 1.0.13p-3.3 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Sat, 25 Oct 2008 11:04:07 +0200 Closes: 487748 487748 Changes: chdrv (1.0.13p-3.3) unstable; urgency=low . * Non-maintainer upload. * Fix pending l10n issues. Debconf translations: - Swedish. Closes: #487748 - Italian. Closes: #487748 -- diff -Nru chdrv-1.0.13p.old/debian/changelog chdrv-1.0.13p/debian/changelog --- chdrv-1.0.13p.old/debian/changelog 2008-10-12 14:41:19.044666072 +0200 +++ chdrv-1.0.13p/debian/changelog 2008-10-25 11:04:14.890729704 +0200 @@ -1,3 +1,12 @@ +chdrv (1.0.13p-3.3) unstable; urgency=low + + * Non-maintainer upload. + * Fix pending l10n issues. Debconf translations: +- Swedish. Closes: #487748 +- Italian. Closes: #487748 + + -- Christian Perrier [EMAIL PROTECTED] Sat, 25 Oct 2008 11:04:07 +0200 + chdrv (1.0.13p-3.2) unstable; urgency=low * Non-maintainer upload to fix pending l10n issues. diff -Nru chdrv-1.0.13p.old/debian/po/it.po chdrv-1.0.13p/debian/po/it.po --- chdrv-1.0.13p.old/debian/po/it.po 1970-01-01 01:00:00.0 +0100 +++ chdrv-1.0.13p/debian/po/it.po 2008-10-23 07:58:04.384727000 +0200 @@ -0,0 +1,59 @@ +# ITALIAN TRANSLATION OF CHDRV'S.PO-DEBCONF FILE +# Copyright (C) 2007 THE CHDRV'S COPYRIGHT HOLDER +# This file is distributed under the same license as the chdrv package. +# +# Vincenzo Campanella [EMAIL PROTECTED], 2008. +msgid +msgstr +Project-Id-Version: it\n +Report-Msgid-Bugs-To: [EMAIL PROTECTED] +POT-Creation-Date: 2007-01-27 09:10+0100\n +PO-Revision-Date: 2008-10-18 09:11+0200\n +Last-Translator: Vincenzo Campanella [EMAIL PROTECTED]\n +Language-Team: Italian [EMAIL PROTECTED]\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=UTF-8\n +Content-Transfer-Encoding: 8bit\n +X-Generator: KBabel 1.11.4\n + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid Do you want /usr/bin/chdrv to be installed SUID root? +msgstr Installare \/usr/bin/chdrv\ in modalità \SUID root\? + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid +You have the option of installing the /usr/bin/chdrv binary with the SUID +bit set. By setting 'SUID root', non-root users may run chdrv directly. +msgstr +È possibile installare \/usr/bin/chdrv\ in modalità \SUID root\. In +questo modo, gli utenti che non sono root potranno eseguire chdrv +direttamente. + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid +However, this is a potential security risk! chdrv may still contain +undiscovered security flaws which malicious users may exploit if chdrv is +set SUID root. You have been warned! +msgstr +Ad ogni modo, questo rappresenta un potenziale rischio di sicurezza! chdrv +potrebbe tuttora contenere vulnerabilità di sicurezza non ancora scoperte +che utenti malintenzionati potrebbero sfruttare se chdrv è installato in +modalità \SUID root\. Siete stati avvisati! + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid +If you do not plan to use chdrv regularly, you should install it without +SUID. You may change this later by running \dpkg-reconfigure chdrv\. +msgstr +Se non si prevede di utilizzare chdrv regolarmente, NON lo si dovrebbe +installare in modalità \SUID root\. È comunque possibile modificare +successivamente questa impostazione, eseguendo il comando \dpkg-reconfigure +chdrv\. diff -Nru chdrv-1.0.13p.old/debian/po/sv.po chdrv-1.0.13p/debian/po/sv.po --- chdrv-1.0.13p.old/debian/po/sv.po 1970-01-01 01:00:00.0 +0100 +++ chdrv-1.0.13p/debian/po/sv.po 2008-10-13 07:44:51.568615000 +0200 @@ -0,0 +1,55 @@ +# translation of chdrv_1.0.13p-3.2_templates.po to swedish +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# +# Martin Bagge [EMAIL PROTECTED], 2008. +msgid +msgstr +Project-Id-Version: chdrv_1.0.13p-3.2_templates\n +Report-Msgid-Bugs-To: [EMAIL PROTECTED] +POT-Creation-Date: 2007-01-27 09:10+0100\n +PO-Revision-Date: 2008-06-23 23:08+0200\n +Last-Translator: Martin Bagge [EMAIL PROTECTED]\n +Language-Team: swedish [EMAIL PROTECTED]\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=UTF-8\n +Content-Transfer-Encoding: 8bit\n +X-Generator: KBabel 1.11.4\n + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid Do you want /usr/bin/chdrv to be installed SUID root? +msgstr Vill du ställa in SUID root för /usr/bin/chdrv? + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid +You have the option of installing the /usr/bin/chdrv binary with the
Bug#422800: Sometimes fails when dragging and dropping a message from one folder to another
Le samedi 25 octobre 2008 à 10:47 +0200, Julien Valroff a écrit : Le jeudi 23 octobre 2008 à 11:33 +0200, Josselin Mouette a écrit : Could you try applying this patch to evolution-data-server, upgrading it and check whether it is fixed? Even without applying this patch, I was not able to reproduce the problem with the current version in sid. You need a connexion loss at the moment of the move to reproduce the issue. Upstream was able to reproduce the bug with 2.20 and nothing relevant has changed since that moment, so I think it is still here. -- .''`. : :' : We are debian.org. Lower your prices, surrender your code. `. `' We will add your hardware and software distinctiveness to `-our own. Resistance is futile. signature.asc Description: Ceci est une partie de message numériquement signée
Bug#464373: [linux-2.6] Not sufficient ?
Hi, I'm using uswsusp for supsending and I noticed the following : * When waking up with the wifi kill button on (to get WiFi working), the card is correctly powered on and the connection will work (modulo some other problems, ..) * When waking up with the wifi kill button off (after having been in places where no WiFi is accessible or useful), if I power the card afterwards, it won't power up and I have to ifdown/ifup to get the card working. I'm not using ifplugd or anything like this. My /etc/network/interfaces : auto wlan0 iface wlan0 inet manual pre-up ip link set wlan0 up wpa-driver wext wpa-roam/etc/wpa_supplicant/wpa_roaming.conf iface default inet dhcp Please ask for more info if needed... Regards, OdyX -- Didier Raboud, proud Debian user. CH-1802 Corseaux [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part.
Bug#502858: here's a patch
Quoting Christian Perrier ([EMAIL PROTECTED]): Quoting Thijs Kinkhorst ([EMAIL PROTECTED]): tags 502858 patch thanks Hi Daniel, Here's a patch to fix this, please include it in the next Aptitude upload. Thanks. I'm building an NMU right now and will upload it to t-p-u unless Daniel objects very soon. Uploaded to DELAYED/1-day to still give a chance to Daniel to react. The only change in that version is the fixed changeleog entry for 0.4.11.10-1lenny1 -- signature.asc Description: Digital signature
Bug#503282: Patch
On Fri, Oct 24, 2008 at 04:27:31PM +0100, Jonny Lamb wrote: I attach my patch for my NMU 3.2.2-7.1. Great! Thanks for NMUing. I wonder why this bug has been hidden for such a long time and was not noticed until recently... Regards Javier signature.asc Description: Digital signature
Bug#496784: [inkscape] Impossible to change font if ttf-bitstream-vera is not installed.
Le Wed, Oct 22, 2008 at 07:21:44PM +0200, Thomas Viehmann a écrit : Adeodato Simó wrote: Charles, if the fix for this bug is simply adding a depends on ttf-bitstream-vera, then the fix is suitable for lenny, and we'll happily unblock it. Can we have a proper fix, though, please? Bug #461308 will not be ready for action before squeeze, but I don't think we should add recommends and depends on that now, in particular Charles, if you don't know how to properly fix it yourself, please at least let others have a look, say until the weekend. Hi all, I prepared a NMU, that I propose to upload on DELAYED/10. Unless the release is to happen in 20 days, it will ensure long time for the maintainer to react, for hackers to solve the problem more smartly, and for users to test the package. While reviewing the BTS page of inkscape, I found two other bugs that can be resolved by the addition of dependancies, in that case of the Suggests level. For one of them, it is also necessary to include a patch to take into acount the renaming of the uniconv program in Debian. This patch is present in Ubuntu and does not seem to be problematic. Lastly, I fixed the menu entry. I attached the debdiff. As you can see, it is inflated by two Autoconf/make files: aqwa『tmp』$ lsdiff inkscape_0.46-2.1_0.46.2.2_debdiff.txt inkscape-0.46/configure inkscape-0.46/debian/inkscape.menu inkscape-0.46/debian/control inkscape-0.46/debian/changelog inkscape-0.46/aclocal.m4 inkscape-0.46/debian/patches/02_uniconvertor_binary_name.dpatch Have a nice day, -- Charles Plessy Tsurumi, Kanagawa, Japan diff -u inkscape-0.46/configure inkscape-0.46/configure --- inkscape-0.46/configure +++ inkscape-0.46/configure @@ -680,6 +680,9 @@ AMTAR am__tar am__untar +INTLTOOL_UPDATE +INTLTOOL_MERGE +INTLTOOL_EXTRACT INTLTOOL_DESKTOP_RULE INTLTOOL_DIRECTORY_RULE INTLTOOL_KEYS_RULE @@ -702,9 +705,6 @@ XGETTEXT MSGMERGE MSGFMT -INTLTOOL_EXTRACT -INTLTOOL_MERGE -INTLTOOL_UPDATE INTLTOOL_PERL ALL_LINGUAS CC @@ -3718,8 +3718,8 @@ echo $ECHO_N checking for intltool = 0.22... $ECHO_C 6; } INTLTOOL_REQUIRED_VERSION_AS_INT=`echo 0.22 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` -INTLTOOL_APPLIED_VERSION=`awk -F\ '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in` -INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\ '/\\$VERSION / { split($ 2, VERSION, .); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in` +INTLTOOL_APPLIED_VERSION=`intltool-update --version | head -1 | cut -d -f3` +INTLTOOL_APPLIED_VERSION_AS_INT=`echo $INTLTOOL_APPLIED_VERSION | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'` { echo $as_me:$LINENO: result: $INTLTOOL_APPLIED_VERSION found 5 echo ${ECHO_T}$INTLTOOL_APPLIED_VERSION found 6; } @@ -3729,6 +3729,132 @@ { (exit 1); exit 1; }; } fi +# Extract the first word of intltool-update, so it can be a program name with args. +set dummy intltool-update; ac_word=$2 +{ echo $as_me:$LINENO: checking for $ac_word 5 +echo $ECHO_N checking for $ac_word... $ECHO_C 6; } +if test ${ac_cv_path_INTLTOOL_UPDATE+set} = set; then + echo $ECHO_N (cached) $ECHO_C 6 +else + case $INTLTOOL_UPDATE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_UPDATE=$INTLTOOL_UPDATE # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z $as_dir as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f $as_dir/$ac_word$ac_exec_ext $as_test_x $as_dir/$ac_word$ac_exec_ext; }; then +ac_cv_path_INTLTOOL_UPDATE=$as_dir/$ac_word$ac_exec_ext +echo $as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext 5 +break 2 + fi +done +done +IFS=$as_save_IFS + + ;; +esac +fi +INTLTOOL_UPDATE=$ac_cv_path_INTLTOOL_UPDATE +if test -n $INTLTOOL_UPDATE; then + { echo $as_me:$LINENO: result: $INTLTOOL_UPDATE 5 +echo ${ECHO_T}$INTLTOOL_UPDATE 6; } +else + { echo $as_me:$LINENO: result: no 5 +echo ${ECHO_T}no 6; } +fi + + +# Extract the first word of intltool-merge, so it can be a program name with args. +set dummy intltool-merge; ac_word=$2 +{ echo $as_me:$LINENO: checking for $ac_word 5 +echo $ECHO_N checking for $ac_word... $ECHO_C 6; } +if test ${ac_cv_path_INTLTOOL_MERGE+set} = set; then + echo $ECHO_N (cached) $ECHO_C 6 +else + case $INTLTOOL_MERGE in + [\\/]* | ?:[\\/]*) + ac_cv_path_INTLTOOL_MERGE=$INTLTOOL_MERGE # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z $as_dir as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f $as_dir/$ac_word$ac_exec_ext $as_test_x $as_dir/$ac_word$ac_exec_ext; }; then +ac_cv_path_INTLTOOL_MERGE=$as_dir/$ac_word$ac_exec_ext +echo $as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext 5 +break 2 + fi +done +done +IFS=$as_save_IFS + + ;; +esac +fi
Bug#503356: retrying file
Martin Bagge wrote: On Sat, 25 Oct 2008, Eugene V. Lyubimkin wrote: Hello Martin, thanks for translation! Please also fill 'Plural-Forms' header in translation (through msginit or manually), and then I will include your translation. new stuff for me but using msginit -i daptup.po -o sv.po -l sv_SE ended me with something that looks all right. Looks good. Thanks. -- Eugene V. Lyubimkin aka JackYF, Ukrainian C++ developer. signature.asc Description: OpenPGP digital signature
Bug#500020: Announce of the upcoming NMU for the cacti-spine package
Thank you :) Com os melhores cumprimentos / Best Regards Carlos Lisboa [EMAIL PROTECTED] On Sat, Oct 25, 2008 at 11:04, Christian Perrier [EMAIL PROTECTED] wrote: Quoting Carlos Lisboa ([EMAIL PROTECTED]): Hi Christian. I'm the portuguese translator of the cacti-spine debconf and i quite puzzled to why there is pt and pt2. This is a leftover from the previous NMU why I just discovered. I removed the extra file which was irrelevant. -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkkC70UACgkQ1OXtrMAUPS0opgCcDGli6h5dHSA4G8eSJle54W8h wcYAoIbiZC4cuWbxpMXtRGgOPPLiyDMN =Yblq -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#464373: [linux-2.6] Not sufficient ?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sat, Oct 25, 2008 at 12:14:12PM +0200, Didier Raboud wrote: I'm using uswsusp for supsending and I noticed the following : * When waking up with the wifi kill button on (to get WiFi working), the card is correctly powered on and the connection will work (modulo some other problems, ..) * When waking up with the wifi kill button off (after having been in places where no WiFi is accessible or useful), if I power the card afterwards, it won't power up and I have to ifdown/ifup to get the card working. I'm not using ifplugd or anything like this. Perhaps you are using network-manager? - Jonas - -- * Jonas Smedegaard - idealist og Internet-arkitekt * Tlf.: +45 40843136 Website: http://dr.jones.dk/ [x] quote me freely [ ] ask before reusing [ ] keep private -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkkC9GUACgkQn7DbMsAkQLgktACeOupuVyJIxGeSfKKQ5Ny+CZ5p KbcAn1sW/TtdbI4j3lsk82566pb983Y9 =50al -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#464373: [linux-2.6] Not sufficient ?
Le samedi 25 octobre 2008 12:26:45 Jonas Smedegaard, vous avez écrit : On Sat, Oct 25, 2008 at 12:14:12PM +0200, Didier Raboud wrote: I'm using uswsusp for supsending and I noticed the following : * When waking up with the wifi kill button on (to get WiFi working), the card is correctly powered on and the connection will work (modulo some other problems, ..) * When waking up with the wifi kill button off (after having been in places where no WiFi is accessible or useful), if I power the card afterwards, it won't power up and I have to ifdown/ifup to get the card working. I'm not using ifplugd or anything like this. Perhaps you are using network-manager? - Jonas Hi, certainly not... ;) For now, it works less good than wpa_supplicant directly. Regards, OdyX -- Didier Raboud, proud Debian user. CH-1802 Corseaux [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part.
Bug#503040: debian-installer: Build firmware for the DNS-323
* Matthew Palmer [EMAIL PROTECTED] [2008-10-24 07:17]: As you noted, I added minix-modules for in the oldsys-preseed patch (since that's where the need for the minix modules is added, technically speaking), but you've reminded me of something I wanted to ask about anyway: arm vs armel. I've only added DNS-323 build support for armel, and not arm; should I duplicate the patch for the arm architecture as well? DNS-323 support is too late for lenny and we will drop arm after lenny, so I think it should only be applied for armel (as you did). In the meantime, updated patch as per your suggestions is attached. Thanks, it looks good to me. I'll apply it after lenny. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#485386: Still not working ?
Hi! Could you please test it with current unstable version ? Looks like you have the same problem in this bug report: http://www.mail-archive.com/[EMAIL PROTECTED]/msg118243.html Try to install gstreamer0.10-plugins-base Thanks -- Marco Rodrigues http://Marco.Tondela.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#491938: Patch for the 0.2a-3.1 NMU of bindgraph
Christian Perrier wrote: Quoting Christian Perrier ([EMAIL PROTECTED]): OK. Do you have time to upload before my NMU enters the archive or would you profer some time and then I remove my upload to DELAYED. If you upload today, my NMU will then just be REJECTed when it reaches 0-day...but of course, you might be too busy for that and need more time. Just let me know. Hmmm, well, I forgot to remove the package from the DELAYED queue and I'm afraid it finally got uploaded. Sorry for this. No problem. I'd rather have a better translated package. Besides, I have been much too busy (shit happens) this last 48h I'll ask for unblock so that it enters testing. Yes, please. Thanks again for your efforts J.L. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#485386: Still not working ?
On 2008-10-25T11:53:16+0100, Marco Rodrigues wrote: Could you please test it with current unstable version ? Looks like you have the same problem in this bug report: http://www.mail-archive.com/[EMAIL PROTECTED]/msg118243.html Try to install gstreamer0.10-plugins-base It works now. Thanks! -- Edit this signature at http://www.digitas.harvard.edu/cgi-bin/ken/sig I can't get laid tonight because everyone else is dead. signature.asc Description: Digital signature
Bug#501125: 1.5.1 is incompatible with Qt 4.4.3
found 501125 1:1.5.1-2 fixed 501125 1:1.5.3-1 tags 501125 confirmed thanks Hello, I was able to reproduce the bug uim-qt 1.5.1-2 (currently in lenny). I have also tried to rebuild uim-qt 1.5.1-2 against current lenny (i.e. against Qt 4.4.3), but that didn't make the bug to go away. However, I can confirm that uim-qt 1.5.3 is compatible with Qt 4.4.3. That's not suprising because according to uim source NEWS file: - Overview of changes from 1.5.2 to 1.5.3 === * Fixes - Qt4 bridge (experimental) * [CRITICAL] Fix bug with Qt4 = 4.4.1, which makes applications infinite loop at the startup * [CRITICAL] Fix uim-helper handling which could cause unexpected crashes * Fix key press with shift, control, alt, and meta keys - So fixes could be backported or 1.5.3 simply unblocked. However, if you choose the latter way, you might want to do binNMU first as uim-qt 1.5.3-1 was build against Qt 4.4.2-2 which had wrong (too loose) shlibs. -- Modestas Vainius [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part.
Bug#502821: Enhances oldsys-preseed patch for the DNS-323
On Sat, Oct 25, 2008 at 12:48:17PM +0200, Martin Michlmayr wrote: * Matt Palmer [EMAIL PROTECTED] [2008-10-24 22:02]: A better patch, based on Martin Michlmayr's feedback, is attached. Enjoy! Looks good, thanks. I'll apply it after lenny. The only remaining question is what default IP the firmware uses, but iirc it simply does DHCP. So we should choose some common IP address. You chose 192.168.0.32 but maybe something in the 192.168.1. range would be better. 192.168.0.32 is what's in the manual for the DNS-323. I'm torn between having a Debian default and sticking with the device's default. The former means we can give users a default in the docs, but since the device will have something hard-coded most of the time, it'll default to that instead so we'll *still* need to tell users to check their manual. As a result, I think that defaulting to the device's default IP is the correct choice. - Matt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503373: foo2zjs: Should/Better select printer and run ``getweb'' to download firmwire during package installation
Package: foo2zjs Version: 20070718dfsg-8 Severity: important After I had configured my printer (HP LaserJet 1020), I find that I can't print unless it has been used on another system say windows, do not poweroff it, then connect to my system. I also find that if it was turned off and turned on, I should use another system to print a document again, then connect to my system, to get it work on my system. After a long time searching on web I find that I should run ``getweb 1020''. I think it's better prompt it when doing postinst. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=zh_CN.utf8, LC_CTYPE=zh_CN.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages foo2zjs depends on: ii libc6 2.7-15 GNU C Library: Shared libraries Versions of packages foo2zjs recommends: ii foomatic-db-engine 3.0.2-20080211-1 OpenPrinting printer support - pro ii wget1.11.4-2 retrieves files from the web Versions of packages foo2zjs suggests: pn hannah-foo2zjsnone (no description available) ii psutils 1.17-26A collection of PostScript documen -- no debconf information -- Sincerely, Yang Zhe -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500020: Announce of the upcoming NMU for the cacti-spine package
Hi Christian. I'm the portuguese translator of the cacti-spine debconf and i quite puzzled to why there is pt and pt2. Com os melhores cumprimentos / Best Regards Carlos Lisboa [EMAIL PROTECTED] On Sat, Oct 25, 2008 at 09:55, Christian Perrier [EMAIL PROTECTED] wrote: Dear maintainer of cacti-spine and Debian translators, Some days ago, I sent a notice to the maintainer of the cacti-spine Debian package, mentioning the status of at least one old po-debconf translation update in the BTS. I announced the intent to build and possibly upload a non-maintainer upload for this package in order to fix this long-time pending localization bug as well as all other pending translations. The package maintainer agreed for the NMU or did not respond in two weeks, so I will proceed with the NMU. The full planned schedule is available at the end of this mail. The package is currently translated to: cs de es eu fr nl pt pt2 pt_BR ru sv vi Among these, the following translations are incomplete: cs es nl pt_BR If you did any of the, currently incomplete, translations you will get ANOTHER mail with the translation to update. Other translators also have the opportunity to create new translations for this package. Once completed, please send them as a bug report against the cacti-spine package so I can incorporate them in the build. The deadline for receiving updates and new translations is Friday, October 31, 2008. If you are not in time you can always send your translation to the BTS. The POT file is attached to this mail. If the maintainer objects to this process I will immediately abort my NMU and send him/her all updates I receive. Otherwise the following will happen (or already has): Friday, October 24, 2008 : send the first intent to NMU notice to the package maintainer. Saturday, October 25, 2008 : send this notice Friday, October 31, 2008 : (midnight) deadline for receiving translation updates Saturday, November 01, 2008 : build the package and upload it to DELAYED/2-day send the NMU patch to the BTS Monday, November 03, 2008 : NMU uploaded to incoming Thanks for your efforts and time. -- -- -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkkC3xwACgkQ1OXtrMAUPS2rLgCdFA7h0t8gKUDaRTVu3y/al/yK fﹱ�瑁뛆ﻴ芢� =7aHf -END PGP SIGNATURE-
Bug#310078: Patch which silences the message
Here is a patch which silences the error message. Probably not the best approach, but it works for me. :) With this I could convert my GPX tracks which didn't have speed elements. Cheers, Rodney --- src/setpath.c.orig 2005-02-06 09:58:47.0 -0500 +++ src/setpath.c 2008-10-25 07:08:25.0 -0400 @@ -422,7 +422,7 @@ countUnconverted(pdata); return 0; /* check path speed */ -} else if (pattr-speed == .0) { +} else if (0 pattr-speed == .0) { fprintf (stderr, gpx2shp:%s:%i track was not converted because no move recorded.\n, signature.asc Description: This is a digitally signed message part
Bug#500020: Announce of the upcoming NMU for the cacti-spine package
Quoting Carlos Lisboa ([EMAIL PROTECTED]): Hi Christian. I'm the portuguese translator of the cacti-spine debconf and i quite puzzled to why there is pt and pt2. This is a leftover from the previous NMU why I just discovered. I removed the extra file which was irrelevant. signature.asc Description: Digital signature
Bug#502821: Enhances oldsys-preseed patch for the DNS-323
* Matt Palmer [EMAIL PROTECTED] [2008-10-24 22:02]: A better patch, based on Martin Michlmayr's feedback, is attached. Enjoy! Looks good, thanks. I'll apply it after lenny. The only remaining question is what default IP the firmware uses, but iirc it simply does DHCP. So we should choose some common IP address. You chose 192.168.0.32 but maybe something in the 192.168.1. range would be better. -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503371: grass GUI fails to startup if launched outside a terminal
Package: grass Version: 6.2.3-2.1 Severity: important If I start GRASS from gnome-terminal, it starts without any problem. But when I try to start it from the GNOME GUI (e.g. using a launcher) I can only get the startup dialog and choose the location. After that, the Slesia map splash screen shows up and then... GRASS exits. That's all. I'm baffled because usually I would start the program from a terminal to see what's wrong, but if run from a terminal everything goes fine. Please give me instructions on how to collect the proper information. Best, Steko -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (101, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages grass depends on: ii gnome-terminal [x-term 2.22.3-3 The GNOME 2 terminal emulator appl ii lesstif2 1:0.95.0-2.1 OSF/Motif 2.1 implementation relea ii libc6 2.7-15GNU C Library: Shared libraries ii libfftw3-3 3.1.2-3.1 library for computing Fast Fourier ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libgdal1-1.5.0 1.5.2-3 Geospatial Data Abstraction Librar ii libgl1-mesa-glx [libgl 7.0.3-6 A free implementation of the OpenG ii libglu1-mesa [libglu1] 7.0.3-6 The OpenGL utility library (GLU) ii libice62:1.0.4-1 X11 Inter-Client Exchange library ii libmysqlclient15off5.0.51a-16MySQL database client library ii libncurses55.6+20081018-1shared libraries for terminal hand ii libpng12-0 1.2.27-2 PNG library - runtime ii libpq5 8.3.4-2 PostgreSQL C client library ii libreadline5 5.2-3 GNU readline and history libraries ii libsm6 2:1.0.3-2 X11 Session Management library ii libsqlite3-0 3.5.9-6 SQLite 3 shared library ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtiff4 3.8.2-11 Tag Image File Format (TIFF) libra ii libx11-6 2:1.1.5-2 X11 client-side library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxmu62:1.0.4-1 X11 miscellaneous utility library ii libxt6 1:1.0.5-3 X11 toolkit intrinsics library ii proj 4.6.0-2 Cartographic projection filter and ii tcl8.4 8.4.19-2 Tcl (the Tool Command Language) v8 ii tk8.4 8.4.19-2 Tk toolkit for Tcl and X11, v8.4 - ii unixodbc 2.2.11-16 ODBC tools libraries ii xterm [x-terminal-emul 237-1 X terminal emulator ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime grass recommends no packages. Versions of packages grass suggests: pn avce00none (no description available) pn e00compr none (no description available) ii gdal-bin 1.5.2-3Geospatial Data Abstraction Librar pn gnuplot none (no description available) pn gpstrans none (no description available) pn grass-doc none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503168: virtualenv bin/activate: PYTHONPATH
retitle 503168 virtualenv shouldn't hard-code absolute path severity 503168 wishlist tags 503168 upstream thanks On Thursday 23 October 2008 17.53:26 Jeff Licquia wrote: Adrian von Bidder wrote: Shouldn't PYTHONPATH be set inside a virtual environment to allow easy installation of local modules? I don't think so. Wouldn't that break if the user sets PYTHONPATH manually? It shouldn't be necessary, either. I just tested installing new local modules in a virtualenv using activate, and was able to use both easy_install and python setup.py install. Were you having problems installing local modules before? My mistake. I moved the environment and didn't realise that the problem I've been having stems from having the old absolute path inside bin/activate and not from not having PYTHONPATH. So the proper solution [for me] would be to look at $0 and pwd and figure out the root dir of the virtualenv from there. (I like to be able to move/copy around the virtualenv to organize my projects.) cheres -- vbi -- featured link: Debian Bookmark Collection - http://bookmarks.debian.net/ signature.asc Description: This is a digitally signed message part.
Bug#485386: Still not working ?
Chung-chieh Shan wrote: On 2008-10-25T11:53:16+0100, Marco Rodrigues wrote: Could you please test it with current unstable version ? Looks like you have the same problem in this bug report: http://www.mail-archive.com/[EMAIL PROTECTED]/msg118243.html Try to install gstreamer0.10-plugins-base It works now. Thanks! Hi! It worked after you installed gstreamer0.10-plugins-base package ? -- Marco Rodrigues http://Marco.Tondela.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#502761: I suggest removing the call to emacspeakconfig and add a mention in README.Debian
tags 502761 patch thanks Introducing debconf support in a package that doesn't use it already is IO too invasive and risking breakage. So, I recommend simply commenting the call to emacspeakconfig in postinst as of now so that this package can be released for lenny. A patch is attached. I plan to build an NMU unless the maintainer is OK to upload himself...or find another solution (but, again, hasty debconf introduction would seem too risky for me) ? -- diff -Nru emacspeak-26.0.old/debian/postinst emacspeak-26.0/debian/postinst --- emacspeak-26.0.old/debian/postinst 2008-10-25 13:29:00.194881985 +0200 +++ emacspeak-26.0/debian/postinst 2008-10-25 13:30:00.242729827 +0200 @@ -46,7 +46,9 @@ fi fi -emacspeakconfig -i +# Commented as this implies prompting without using +# debconf. See #502761 +# emacspeakconfig -i # dh_installdeb will replace this with shell code automatically # generated by other debhelper scripts. diff -Nru emacspeak-26.0.old/debian/README.Debian emacspeak-26.0/debian/README.Debian --- emacspeak-26.0.old/debian/README.Debian 2008-10-25 13:29:00.194881985 +0200 +++ emacspeak-26.0/debian/README.Debian 2008-10-25 13:31:18.994729859 +0200 @@ -13,6 +13,9 @@ gets configuration parameters from /etc/emacspeak.conf and starts emacs with emacspeak support. +Before it is used, Emacspeak must be configured by root, by running +'emacspeakconfig -i'. + Several flavors of emacs may be installed at the same time (emacs20, emacs21, xemacs21, etc.). In accordance with the Debian emacs policy, emacspeak is byte-compiled separately for each supported flavor - @@ -85,3 +88,5 @@ James R. Van Zandt [EMAIL PROTECTED], Mon Jan 30 21:36:59 EST 2006 + + -- Christian Perrier [EMAIL PROTECTED], Sat, 25 Oct 2008 13:31:18 z signature.asc Description: Digital signature
Bug#500189: okular fails to start as well
tags 500189 moreinfo thanks Hello, šeštadienis 27 Rugsėjis 2008, Dmitry V. Rutsky rašė: Now okular fails to start properly with the same messages, so I think it's likely a problem related to KDE4 libraries. Was this problem fixed? Do you have uim-qt installed? If so, which version? -- Modestas Vainius [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part.
Bug#382222: Device option not working renders package unsable
severity 38 grave thanks My system do not have a /dev/cdrom any more (udev-based system) and I guess many other users will be in the same situation. So this bug probably renders the package unusable for most users. IMO the package could well be removed from Debian, there are working alternatives available (e.g. jack, ripit) and there hasn't been any activity from Sebastien J. Gross within 3 years while some bugs where opened. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#486400: Status for this bug?
Hi, I was “assigned” the RC bug as part of BugSprint (http://wiki.debian.org/BugSprint). Looking at the bug log, it seems there was a solution back in july, which was implemented in slashy 0.3.12. But this didn't fix the problem. What is the current status of the bug, and what are the conclusions? It seems some info went on private mails, could they be published so one can work on the issue? Cheers, -- Yves-Alexis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503375: libapache2-mod-perl2 - Uses undefined symbol ap_get_server_banner
Package: libapache2-mod-perl2 Version: 2.0.4-3 Severity: grave After a partial upgrade to Lenny, apache fails to start with the following message: | /usr/sbin/apache2: symbol lookup error: /usr/lib/perl5/auto/Apache2/ServerUtil/ServerUtil.so: undefined symbol: ap_get_server_banner This symbol was added after the apache2 version in Etch but libapache2-mod-perl2 lacks a versioned dependency. Bastian -- It is a human characteristic to love little animals, especially if they're attractive in some way. -- McCoy, The Trouble with Tribbles, stardate 4525.6 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503111: hobbit: bbtest-net segfaults on SSL cert expire 2054
tags 503111 confirmed pending severity 503111 important Re: Roland Rosenfeld 2008-10-22 [EMAIL PROTECTED] I fear that the problem is triggered by a very long living SSL certificate, which expires on 11.12.2054 (I know that this doesn't make sense, but it's an internal appliance, where the vendor issued the certificate). contest.c:626 is: certend = strdup(bbgen_ASN1_UTCTIME(X509_get_notAfter(peercert))); Hi Roland, confirmed. The patch below fixes the issue. The problem is that tm-data will have two more digits if the year is out of a certain range (I guess 1950..2050). I'll try to get the fix into lenny. --- a/bbnet/contest.c +++ b/bbnet/contest.c @@ -390,20 +390,25 @@ static char *bbgen_ASN1_UTCTIME(ASN1_UTC static char result[256]; char *asn1_string; int gmt=0; - int i; - int year=0,month=0,day=0,hour=0,minute=0,second=0; + int len, i; + int century=0,year=0,month=0,day=0,hour=0,minute=0,second=0; - i=tm-length; + len=tm-length; asn1_string=(char *)tm-data; - if (i 10) return NULL; - if (asn1_string[i-1] == 'Z') gmt=1; - for (i=0; i10; i++) { + if (len 10) return NULL; + if (asn1_string[len-1] == 'Z') gmt=1; + for (i=0; ilen-1; i++) { if ((asn1_string[i] '9') || (asn1_string[i] '0')) return NULL; } + if (len = 15) { /* 20541024111745Z format */ + century = 100 * ((asn1_string[0]-'0')*10+(asn1_string[1]-'0')); + asn1_string += 2; + } + year=(asn1_string[0]-'0')*10+(asn1_string[1]-'0'); - if (year 50) year+=100; + if (century == 0 year 50) year+=100; month=(asn1_string[2]-'0')*10+(asn1_string[3]-'0'); if ((month 12) || (month 1)) return NULL; @@ -417,7 +422,7 @@ static char *bbgen_ASN1_UTCTIME(ASN1_UTC } sprintf(result, %04d-%02d-%02d %02d:%02d:%02d %s, - year+1900, month, day, hour, minute, second, (gmt?GMT:)); + year+(century?century:1900), month, day, hour, minute, second, (gmt?GMT:)); return result; } Christoph -- [EMAIL PROTECTED] | http://www.df7cb.de/ signature.asc Description: Digital signature
Bug#503376: [Intl: fr] po://daptup/fr.po
Package: daptup Version: 0.7.2 Severity: wishlist Tags: l10n Patch Hi, Please find attached the french po templates translation, proofread by the debian-l10n-french mailing list contributors. This file should be put as debian/po/fr.po in your package build tree. Regards steve # French po translation # Copyright (C) YEAR Eugene V. Lyubimkin # This file is distributed under the same license as the daptup package. # FIRST AUTHOR [EMAIL PROTECTED], 2008. # #, fuzzy msgid msgstr Project-Id-Version: daptup_0.7.2\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2008-10-19 11:24+0300\n PO-Revision-Date: 2008-10-20 01:02+0200\n Last-Translator: Steve Petruzzello [EMAIL PROTECTED]\n Language-Team: French [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n Plural-Forms: nplurals=2; plural=(n1);\n #: daptup:66 #, sh-format msgid Cannot read configuration from '$DAPTUP_CONFFILE'. msgstr Impossible de lire la configuration depuis le fichier'$DAPTUP_CONFFILE' #: daptup:74 msgid You cannot mix '--pre', '--post' and '--last' options or repeat them. msgstr Vous ne pouvez pas mélanger les options '--pre', '--post' et '--last' ni les répéter. #: daptup:98 #, sh-format msgid Usage: $BASENAME [ --pre | --post | --last ] [ -h | --help | --nocolor ]. msgstr Usage : $BASENAME [ --pre | --post | --last ] [ -h | --help | --nocolor ]. #: daptup:100 msgid daptup runs 'apt-get update' command inside and outputs: msgstr daptup exécute la commande 'apt-get update' en interne et retourne : #: daptup:101 msgid - list of packages recently entered to repo; msgstr - liste des paquets récemment introduits dans le dépôt ; #: daptup:102 msgid - list of packages which got new updates; msgstr - liste des paquets mis à jour ; #: daptup:103 msgid - list of changes in 'watched' packages; msgstr - liste des changements pour les paquets 'surveillés' ; #: daptup:104 msgid - list of outdated packages (optionally). msgstr - liste des paquets obsolètes (en option) #: daptup:106 msgid Options: msgstr Options : #: daptup:107 msgid -h, --help: output this help and exit msgstr -h, --help : affiche cette aide et quitte #: daptup:108 msgid --nocolor: do not use colored output msgstr --nocolor : n'utilise pas de couleur pour l'affichage #: daptup:109 msgid --pre: do only 'pre' stage: collect info that will be used as 'old' msgstr --pre : n'effectue que l'étape 'pre' : collecte l'information qui sera utilisée pour 'old' #: daptup:110 msgid --post: do only 'post' stage: collect 'new' info and output changes msgstr --post : n'effectue que l'étape 'post' : collecte l'information et affiche les changements #: daptup:111 msgid if appropriate option is not disabled in config file msgstr si l'option adéquate n'est pas désactivée dans le fichier de configuration #: daptup:112 msgid --last: only output last changes msgstr --last : n'affiche que les derniers changements #: daptup:117 #, sh-format msgid Unknown param: $PARAM msgstr Paramètre inconnu : $PARAM #: daptup:128 msgid You must run daptup with root privileges. msgstr Vous devez exécutez daptup avec les privilèges du superutilisateur #: daptup:217 #, sh-format msgid warning: cannot find any changelog for package '$package' msgstr Attention : impossible de trouver un journal des modifications pour le paquet '$package' #: daptup:236 msgid day msgid_plural days msgstr[0] jour msgstr[1] jours #: daptup:240 #, sh-format msgid error: cannot extract last modification date for package '$package' msgstr Erreur : impossible d'extraire la date de dernière modification pour le paquet '$package' #: daptup:243 #, sh-format msgid error: cannot fetch last entry from changelog for package '$package' msgstr Erreur : impossible de récupérer la dernière entrée du journal de modifications pour le paquet '$package' #: daptup:251 msgid [done] msgstr [Fait] #: daptup:272 msgid Building old list of packages... msgstr Construction de l'ancienne liste des paquets... #: daptup:277 msgid errors present. Is apt/dpkg running? msgstr Erreurs : est-ce que apt ou dpkg est en cours d'exécution ? #: daptup:282 msgid Building old list of available updates... msgstr Construction de l'ancienne liste des mises à jour disponibles... #: daptup:286 msgid Building old list of watched packages... msgstr Construction de l'ancienne liste des paquets surveillés... #: daptup:295 msgid Building new list of packages... msgstr Construction de la nouvelle liste de paquets... #: daptup:299 msgid Building new list of available updates... msgstr Construction de la nouvelle liste des mises à jour disponibles... #: daptup:303 msgid Building new list of watched packages... msgstr Construction de la nouvelle liste des paquets surveillés... #: daptup:322 msgid Building list of outdated packages... msgstr Construction de la liste des paquets obsolètes... #: daptup:327
Bug#449497: foo2zjs: application depends on non-free firmware
Hello, README.Debian of foo2zjs provides the following text: cut foo2zjs for Debian --- Please understand that I had to delete some files which the author is still providing, because I got no source code for them. This is necessary to get the package into Debian main. If you really need these programs, please freel free to download them from http://foo2zjs.rkkda.com/foo2zjs.tar.gz on your own risk. In addition to that I also deleted all binary files (.e.g. .icm). (Type wget http://foo2zjs.rkkda.com/foo2zjs.tar.gz;). Then run the following commands: tar -xvvzf foo2zjs.tar.gz cd foo2zjs make /cut Is this actually needed to make the program work? Then it clearly doesn't belong in the main section of Debian, as main is not supposed to depend on external stuff. If the program works fine without this, in my opinion this bug should be downgraded again, and marked wontfix, as non of the non-free files (neither the firmware files, nor icm profiles, ...) are actually contained in the Debian package. Greetings, Joost Damad -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#502744: mxallowd: piuparts test fails: debconf-related problem?
retitle 502744 mxallowd: broken debconf handling thanks On Sun, Oct 19, 2008 at 06:16:40PM +0200, Lucas Nussbaum wrote: On 19/10/08 at 17:45 +0200, Michael Stapelberg wrote: I think the problem is that you don't have an interactive terminal so that you can't answer the debconf questions. I'm not sure how to fix this, if this needs to be fixed. Maybe you have a solution. I'm setting the noninteractive debconf frontend. So I'm not presented by a question anyway. Right, this is fully reproducible for me with something like # env DEBIAN_FRONTEND=noninteractive apt-get install mxallowd The problem is (from debian/mxallowd.config): db_get mxallowd/real_mailservers [ ! -z $RET ] add_entry real-mailserver ${RET} db_input high mxallowd/fake_mailservers || true which fails with 'set -e' if RET is empty. The simplest fix is to do something like [ -z $RET ] || add_entry real-mailserver ${RET} instead, which should result in the default config file on noninteractive installations. However, there are other problems with the debconf handling too. First, it is violating the 'debconf is not a registry' rule: while the maintainer scripts will write the debconf settings into /etc/mxallowd.conf, the settings are never read back. If mxallowd.conf is changed manually, the old debconf settings will override the manual ones. For example, reinstalling the package will result in the debconf settings overwriting those in mxallowd.conf. Please see the section about 'Config file handling' in debconf-devel(7). This definitely needs to be fixed. Another problem is that you shouldn't be editing /etc/mxallowd.conf in the config script. Quoting debconf-devel(7): The config script should not need to modify the filesystem at all. It just examines the state of the system, and asks questions, and debconf stores the answers to be acted on later by the postinst script. Conversely, the postinst script should almost never use debconf to ask questions, but should instead act on the answers to questions asked by the config script. The config script actually fails when preconfiguring, because it unconditionally tries to copy /etc/mxallowd.conf when it doesn't exist yet. However, it succeeds when re-invoked from the postinst, so this is not really fatal. -- Niko Tyni [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#449497: downgrade
severity 449497 wishlist tags 449497 wontfix thx I am well aware that upstream author dislikes all sorts of distribution and does not want them to ship foo2zjs. However, the non-free stuff was stripped away from the package, including a lot of the icm files. Please take the effort yourself to check it and point us to the exact files. Cheers Steffen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503378: /usr/bin/licensecheck: Detects some 3-clause BSD as 2-clause
Package: devscripts Version: 2.10.38 Severity: normal File: /usr/bin/licensecheck The following license text is incorrectly detected as 2-clause BSD: * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of Apple Computer, Inc. (Apple) or The Mozilla * Foundation (Mozilla) nor the names of their contributors may be used * to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY APPLE, MOZILLA AND THEIR CONTRIBUTORS AS * IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL APPLE, MOZILLA OR * THEIR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The problem is that the 3rd clause says *their* contributors instead of *its* contributors, as matched in the regexp. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages devscripts depends on: ii dpkg-dev 1.14.22Debian package development tools ii libc6 2.7-14 GNU C Library: Shared libraries ii perl 5.10.0-16 Larry Wall's Practical Extraction Versions of packages devscripts recommends: ii at 3.1.10.2 Delayed job execution and batch pr ii bsd-mailx [mailx] 8.1.2-0.20071201cvs-3 A simple mail user agent ii bzr1.5-1.1 easy to use distributed version co ii curl 7.18.2-7 Get a file from an HTTP, HTTPS or ii cvs1:1.12.13-12 Concurrent Versions System ii dctrl-tools2.13.0Command-line tools to process Debi ii debian-keyring 2008.09.23GnuPG (and obsolete PGP) keys of D pn debian-maintainers none(no description available) ii dput 0.9.2.35 Debian package upload tool ii epiphany-gecko [ww 2.22.3-4 Intuitive GNOME web browser - Geck ii epiphany-webkit [w 2.22.3-4 Intuitive GNOME web browser - webk ii equivs 2.0.7-0.1 Circumvent Debian package dependen ii fakeroot 1.10.1Gives a fake root environment ii galeon [www-browse 2.0.6-2 GNOME web browser for advanced use ii git-core 1:1.5.6.5-1 fast, scalable, distributed revisi ii gnupg 1.4.9-3 GNU privacy guard - a free PGP rep ii iceape-browser [ww 1.1.12-1 Iceape Navigator (Internet browser ii iceweasel [www-bro 3.0.3-3 lightweight web browser based on M pn libauthen-sasl-per none(no description available) ii libcrypt-ssleay-pe 0.57-1+b1 Support for https protocol in LWP ii libparse-debcontro 2.005-2 Easy OO parsing of Debian control- ii libsoap-lite-perl 0.710.08-1Client and server side SOAP implem pn libterm-size-perl none(no description available) ii libtimedate-perl 1.1600-9 Time and date functions for Perl ii liburi-perl1.35.dfsg.1-1 Manipulates and accesses URI strin ii libwww-perl5.813-1 WWW client/server library for Perl ii libyaml-syck-perl 1.05-1Fast, lightweight YAML loader and ii links [www-browser 2.2-1 Web browser running in text mode ii lintian2.0.0 Debian package checker ii lsb-release3.2-20Linux Standard Base version report ii lynx-cur [www-brow 2.8.7dev10-2.1Text-mode WWW Browser with NLS sup ii mailx 1:20071201-3 Transitional package for mailx ren ii man-db 2.5.2-3 on-line manual pager ii
Bug#503377: vlc: Seems to start gnome-power-manager when playing
Package: vlc Version: 0.9.4-1 Severity: normal The experimental version of VLC seems to be starting gnome-power-manager when playing a movie. Gnome-power-manager never starts by itself in any other situation that when playing a movie with VLC. This is unconfortable because: -gnome-power-manager will change the brightness set by the KDE applet -gnome-power-manager does not have a quit option, so it needs to be killed by some means. Running a Debian Unstable, updated a few days ago, with only the VLC package from experimental. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (650, 'testing'), (600, 'unstable'), (200, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-1-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages vlc depends on: ii libaa1 1.4p5-37+b1 ascii art library ii libc6 2.7-15GNU C Library: Shared libraries ii libcaca0 0.99.beta16-1 colour ASCII art library ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libfribidi00.10.9-1 Free Implementation of the Unicode ii libgcc11:4.3.2-1 GCC support library ii libgl1-mesa-glx [libgl 7.0.3-6 A free implementation of the OpenG ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libglu1-mesa [libglu1] 7.0.3-6 The OpenGL utility library (GLU) ii libgtk2.0-02.12.11-4 The GTK+ graphical user interface ii libnotify1 [libnotify1 0.4.4-3 sends desktop notifications to a n ii libqtcore4 4.4.3-1 Qt 4 core module ii libqtgui4 4.4.3-1 Qt 4 GUI module ii libsdl-image1.21.2.6-3 image loading library for Simple D ii libsdl1.2debian1.2.13-4 Simple DirectMedia Layer ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii libtar 1.2.11-5 C library for manipulating tar arc ii libvlccore00.9.4-1 multimedia player and streamer lib ii libx11-6 2:1.1.5-2 X11 client-side library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxinerama1 2:1.0.3-2 X11 Xinerama extension library ii libxv1 2:1.0.4-1 X11 Video extension library ii ttf-dejavu-core2.25-3Vera font family derivate with add ii vlc-nox0.9.4-1 multimedia player and streamer (wi ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime vlc recommends no packages. Versions of packages vlc suggests: pn mozilla-plugin-vlcnone (no description available) pn videolan-doc none (no description available) Versions of packages vlc-nox depends on: ii liba52-0.7.4 0.7.4-11 library for decoding ATSC A/52 str ii libasound2 1.0.16-2 ALSA library ii libavahi-client3 0.6.23-2 Avahi client library ii libavahi-common3 0.6.23-2 Avahi common library ii libavc1394-0 0.5.3-1+b1control IEEE 1394 audio/video devi ii libavcodec51 3:20080706-0.3library to encode decode multimedi ii libavformat52 3:20080706-0.3ffmpeg file format library ii libavutil493:20080706-0.3avutil shared libraries ii libc6 2.7-15GNU C Library: Shared libraries ii libcdio7 0.78.2+dfsg1-3library to read and control CD-ROM ii libdbus-1-31.2.1-3 simple interprocess messaging syst ii libdca00.0.5-1 decoding library for DTS Coherent ii libdvbpsi4 0.1.5-3.1 library for MPEG TS and DVB PSI ta ii libdvdnav4 4.1.2-3 DVD navigation library ii libdvdread30.9.7-11 library for reading DVDs ii libebml0 0.7.7-3.1 access library for the EBML format ii libfaad0 2.6.1-3.1 freeware Advanced Audio Decoder - ii libflac8 1.2.1-1.2 Free Lossless Audio Codec - runtim ii libfontconfig1 2.6.0-1 generic font configuration library ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libfribidi00.10.9-1 Free Implementation of the Unicode ii libgcc11:4.3.2-1 GCC support library ii libgcrypt111.4.1-1 LGPL Crypto library - runtime libr ii libgnutls262.4.2-1 the GNU TLS library - runtime libr ii libhal10.5.11-5
Bug#503379: sleuthkit 3.0.0 is available
Package: sleuthkit Version: 2.52-1 Severity: wishlist sleuthkit 3.0.0 is available -- Pt! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503329: patch
tags 503329 patch thanks Patch attached. Bastian -- The idea of male and female are universal constants. -- Kirk, Metamorphosis, stardate 3219.8 diff -u request-tracker3.6-3.6.7/debian/changelog request-tracker3.6-3.6.7/debian/changelog --- request-tracker3.6-3.6.7/debian/changelog +++ request-tracker3.6-3.6.7/debian/changelog @@ -1,3 +1,10 @@ +request-tracker3.6 (3.6.7-3.1) UNRELEASED; urgency=low + + * Non-maintainer upload. + * Use correct server name for self referencing URIs. (closes: #503329) + + -- Bastian Blank [EMAIL PROTECTED] Sat, 25 Oct 2008 13:58:44 +0200 + request-tracker3.6 (3.6.7-3) unstable; urgency=low * Fix timezone handling in the default configuration. (Closes: #498124) diff -u request-tracker3.6-3.6.7/debian/patches/00list request-tracker3.6-3.6.7/debian/patches/00list --- request-tracker3.6-3.6.7/debian/patches/00list +++ request-tracker3.6-3.6.7/debian/patches/00list @@ -13,0 +14 @@ +60_uri_self_reference only in patch2: unchanged: --- request-tracker3.6-3.6.7.orig/debian/patches/60_uri_self_reference.dpatch +++ request-tracker3.6-3.6.7/debian/patches/60_uri_self_reference.dpatch @@ -0,0 +1,19 @@ +#! /bin/sh /usr/share/dpatch/dpatch-run +## 60_uri_self_reference.dpatch by Bastian Blank [EMAIL PROTECTED] +## +## All lines beginning with `## DP:' are a description of the patch. +## DP: No description. + [EMAIL PROTECTED]@ +diff -urNad request-tracker3.6-3.6.7~/lib/RT/Interface/Web.pm request-tracker3.6-3.6.7/lib/RT/Interface/Web.pm +--- request-tracker3.6-3.6.7~/lib/RT/Interface/Web.pm 2008-10-25 14:29:09.0 +0200 request-tracker3.6-3.6.7/lib/RT/Interface/Web.pm 2008-10-25 14:29:35.0 +0200 +@@ -200,7 +200,7 @@ + # it will just upset them (and invalidate their credentials) + if ($uri-host eq $server_uri-host + $uri-port eq $server_uri-port) { +-$uri-host($ENV{'HTTP_HOST'}); ++$uri-host($ENV{'SERVER_NAME'}); + $uri-port($ENV{'SERVER_PORT'}); + } +
Bug#503376: [Intl: fr] po://daptup/fr.po
Steve wrote: Package: daptup Version: 0.7.2 Severity: wishlist Tags: l10n Patch Thanks for translation. It will be included in the next daptup release. -- Eugene V. Lyubimkin aka JackYF, Ukrainian C++ developer. signature.asc Description: OpenPGP digital signature
Bug#464868: Autopsy 2.10 is released - Subject Change
Please change the subject to Autopsy 2.20 is released. -- GMX Download-Spiele: Preizsturz! Alle Puzzle-Spiele Deluxe über 60% billiger. http://games.entertainment.gmx.net/de/entertainment/games/download/puzzle/index.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503375: libapache2-mod-perl2 - Uses undefined symbol ap_get_server_banner
-=| Bastian Blank, Sat, Oct 25, 2008 at 02:20:46PM +0200 |=- Package: libapache2-mod-perl2 Version: 2.0.4-3 Severity: grave After a partial upgrade to Lenny, apache fails to start with the following message: | /usr/sbin/apache2: symbol lookup error: /usr/lib/perl5/auto/Apache2/ServerUtil/ServerUtil.so: undefined symbol: ap_get_server_banner This symbol was added after the apache2 version in Etch but libapache2-mod-perl2 lacks a versioned dependency. According to this commit[1], mod_perl switched to ap_get_server_banner in response of deprecation of ap_get_server_version in Apache 2.2.4. [1] http://svn.apache.org/viewvc?view=revrevision=532829 I think making libapache2-mod-perl2 depend on apache2 = 2.2.4 would be sufficient (at least wrt the ap_get_server_banner symbol). For reference, apache2 version in Etch is 2.2.3-4+etch6, Lenny/Sid has 2.2.9-10. Change committed. Please raise your hand before Monday if you see any problem with it. -- damJabberID: [EMAIL PROTECTED] signature.asc Description: Digital signature
Bug#503375: Bug in libapache2-mod-perl2 fixed in revision 26214
tag 503375 + pending thanks Some bugs are closed in revision 26214 by Damyan Ivanov (dmn) Commit message: add dependency on apache2 (= 2.2.4) because of the new ap_get_server_banner symbol not available in previous apaches Closes: #503375: libapache2-mod-perl2 - Uses undefined symbol ap_get_server_banner Thanks to Bastian Blank for reporting. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#500987: libpcre3 missing shlibs bump
Re: Julien Cristau 2008-10-05 [EMAIL PROTECTED] You should update the shlibs file and ask for binNMUs of the reverse dependencies built against libpcre3-dev 7.8-1 Or revert to 7.6, which would avoid the mess related to a pcre3 shlibs bump in unstable at this stage of the release. I was just bit by that issue when trying to update hobbit. I'd like to get a fix into lenny, but the dependency bump of libpcre3 makes this hard. Annoyed, Christoph -- [EMAIL PROTECTED] | http://www.df7cb.de/ signature.asc Description: Digital signature
Bug#503381: varnish - FTBFS: error: 'PAGESIZE_2POW' undeclared here
Package: varnish Version: 2.0.1-1 Severity: serious There was an error while trying to autobuild your package: Automatic build of varnish_2.0.1-1 on debian-31.osdl.marist.edu by sbuild/s390 98 [...] s390-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I../.. -DMALLOC_PRODUCTION -D__isthreaded=true -Wall -g -O2 -MT libjemalloc_mt_la-jemalloc_linux.lo -MD -MP -MF .deps/libjemalloc_mt_la-jemalloc_linux.Tpo -c jemalloc_linux.c -fPIC -DPIC -o .libs/libjemalloc_mt_la-jemalloc_linux.o jemalloc_linux.c:828: error: 'PAGESIZE_2POW' undeclared here (not in a function) jemalloc_linux.c: In function 'arena_run_reg_dalloc': jemalloc_linux.c:2516: error: 'QUANTUM_2POW' undeclared (first use in this function) jemalloc_linux.c:2516: error: (Each undeclared identifier is reported only once jemalloc_linux.c:2516: error: for each function it appears in.) jemalloc_linux.c:2528: error: invalid operands to binary (have 'long unsigned int' and 'const unsigned int *') jemalloc_linux.c:2528: warning: comparison between pointer and integer jemalloc_linux.c:2529: error: invalid operands to binary (have 'size_t' and 'const unsigned int *') jemalloc_linux.c:2529: error: array subscript is not an integer jemalloc_linux.c:2529: error: invalid operands to binary * (have 'const unsigned int *' and 'unsigned int') jemalloc_linux.c:2529: warning: assignment makes integer from pointer without a cast jemalloc_linux.c: In function 'arena_new': jemalloc_linux.c:4139: error: 'QUANTUM_2POW' undeclared (first use in this function) jemalloc_linux.c:4160: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c:4160: warning: assignment makes integer from pointer without a cast jemalloc_linux.c: In function 'malloc_print_stats': jemalloc_linux.c:4567: error: 'QUANTUM_2POW' undeclared (first use in this function) jemalloc_linux.c:4567: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c:4573: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c:4575: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c: In function 'size2bin_init': jemalloc_linux.c:4729: warning: assignment from incompatible pointer type jemalloc_linux.c: In function 'size2bin_init_hard': jemalloc_linux.c:4759: error: 'QUANTUM_2POW' undeclared (first use in this function) jemalloc_linux.c:4759: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c:4767: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c:4767: error: invalid operands to binary (have 'unsigned int' and 'const unsigned int *') jemalloc_linux.c:4768: error: invalid operands to binary (have 'size_t' and 'const unsigned int *') jemalloc_linux.c:4768: warning: assignment makes integer from pointer without a cast jemalloc_linux.c: In function 'malloc_init_hard': jemalloc_linux.c:5069: error: 'QUANTUM_2POW' undeclared (first use in this function) jemalloc_linux.c:5069: warning: comparison between pointer and integer jemalloc_linux.c:5172: error: invalid operands to binary (have 'size_t' and 'const unsigned int *') jemalloc_linux.c:5172: warning: assignment makes integer from pointer without a cast make[4]: *** [libjemalloc_mt_la-jemalloc_linux.lo] Error 1 make[4]: Leaving directory `/build/buildd/varnish-2.0.1/lib/libjemalloc' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/build/buildd/varnish-2.0.1/lib' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/build/buildd/varnish-2.0.1' make[1]: *** [all] Error 2 make[1]: Leaving directory `/build/buildd/varnish-2.0.1' make: *** [build-stamp] Error 2 dpkg-buildpackage: failure: debian/rules build gave error exit status 2 ** Build finished at 20081017-1554 FAILED [dpkg-buildpackage died] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#501515: hwb: hideously outdated
severity 501515 wishlist On Fri, 2008.10.24, 298, Robert James Clay wrote: On Oct 7, 2008, at 9:17 PM, green wrote: On Tue, 2008.10.07, 281, Robert James Clay wrote: On Oct 7, 2008, at 7:33 PM, green wrote: This package is hideously outdated: more than 4 years so. While it is true that it was last packaged from the site then, is any of the information that is in the current package actually not valid? No, I've not found anything that is incorrect. Given that, I don't see why it should more than a wishlist bug... Whatever. I just can't imagine that there haven't been significant changes after four years where hardware is concerned (the lack of new hardware makes a 2004 Hardware Book obsolete not by incorrect data but by lack of data)... so I would like to have a more current Hardware Book. signature.asc Description: Digital signature
Bug#503380: libjogl-java - FTBFS: Requires '${compiler.cfg.id}'
Package: libjogl-java Version: 1.1.1+dak1-1 Severity: serious There was an error while trying to autobuild your package: Automatic build of libjogl-java_1.1.1+dak1-1 on debian-31.osdl.marist.edu by sbuild/s390 98 [...] c.build: BUILD FAILED /build/buildd/libjogl-java-1.1.1+dak1/jogl/make/build.xml:1571: The following error occurred while executing this line: /build/buildd/libjogl-java-1.1.1+dak1/jogl/make/build.xml:497: The following error occurred while executing this line: /build/buildd/libjogl-java-1.1.1+dak1/gluegen/make/build.xml:464: The following error occurred while executing this line: /build/buildd/libjogl-java-1.1.1+dak1/gluegen/make/build.xml:384: The following error occurred while executing this line: /build/buildd/libjogl-java-1.1.1+dak1/gluegen/make/build.xml:324: Requires '${compiler.cfg.id}' Total time: 1 minute 42 seconds make: *** [debian/stamp-ant-build] Error 1 dpkg-buildpackage: failure: debian/rules build gave error exit status 2 ** Build finished at 20081012-1707 FAILED [dpkg-buildpackage died] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503383: libkinosearch-perl - FTBFS: Expects signed char
Package: libkinosearch-perl Version: 0.163-1 Severity: serious There was an error while trying to autobuild your package: Automatic build of libkinosearch-perl_0.163-1 on debian-31.osdl.marist.edu by sbuild/s390 98 [...] t/101-simple_template_io.. # Failed test 'signed byte' # at t/101-simple_template_io.t line 21. # Structures begin differing at: # $got-[0] = '128' # $expected-[0] = '-128' # Looks like you failed 1 test of 13. dubious Test returned status 1 (wstat 256, 0x100) DIED. FAILED test 2 Failed 1/13 tests, 92.31% okay [...] Failed Test Stat Wstat Total Fail List of Failed --- t/101-simple_template_io.t 1 256131 2 t/103-repeats_template_io.t4 1024184 2 4 6 8 2 tests skipped. Failed 2/53 test scripts. 5/662 subtests failed. Files=53, Tests=662, 25 wallclock secs (23.99 cusr + 0.98 csys = 24.97 CPU) Failed 2/53 test programs. 5/662 subtests failed. make: *** [build-stamp] Error 255 dpkg-buildpackage: failure: debian/rules build gave error exit status 2 ** Build finished at 20081025-0840 FAILED [dpkg-buildpackage died] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503382: love - FTBFS: lua5.1: Command not found
Package: love Version: 0.4.0-1 Severity: serious There was an error while trying to autobuild your package: Automatic build of love_0.4.0-1 on debian-31.osdl.marist.edu by sbuild/s390 98 [...] cp gfx/*.png docs/gfx/ lua5.1 lovedoc.lua make[1]: lua5.1: Command not found make[1]: *** [all] Error 127 make[1]: Leaving directory `/build/buildd/love-0.4.0/debian/doc' make: *** [build-indep-stamp] Error 2 dpkg-buildpackage: failure: debian/rules build gave error exit status 2 ** Build finished at 20081025-0807 FAILED [dpkg-buildpackage died] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503385: /usr/lib/python2.5/site-packages/pytz/__init__.py:29: UserWarning:
Package: python-matplotlib Version: 0.98.3-4 Severity: minor I get the following warning when running ipython -pylab. It doesn't occur when running ipython on its own. [EMAIL PROTECTED]:~$ ipython -pylab /usr/lib/python2.5/site-packages/pytz/__init__.py:29: UserWarning: Module dateutil was already imported from /var/lib/python-support/python2.5/dateutil/__init__.py, but /var/lib/python-support/python2.5 is being added to sys.path from pkg_resources import resource_stream Python 2.5.2 (r252:60911, Sep 29 2008, 21:15:13) Type copyright, credits or license for more information. IPython 0.8.4 -- An enhanced Interactive Python. ? - Introduction and overview of IPython's features. %quickref - Quick reference. help - Python's own help system. object? - Details about 'object'. ?object also works, ?? prints more. Welcome to pylab, a matplotlib-based Python environment. For more information, type 'help(pylab)'. In [1]: Chris -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.27.2 (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages python-matplotlib depends on: ii libatk1.0-01.22.0-1 The ATK accessibility toolkit ii libc6 2.7-14GNU C Library: Shared libraries ii libcairo2 1.6.4-6.1 The Cairo 2D vector graphics libra ii libfreetype6 2.3.7-2 FreeType 2 font engine, shared lib ii libgcc11:4.3.2-1 GCC support library ii libglib2.0-0 2.16.6-1 The GLib library of C routines ii libgtk2.0-02.12.11-3 The GTK+ graphical user interface ii libpango1.0-0 1.20.5-2 Layout and rendering of internatio ii libpng12-0 1.2.27-2 PNG library - runtime ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii python 2.5.2-2 An interactive high-level object-o ii python-cairo 1.4.12-1.1Python bindings for the Cairo vect ii python-central 0.6.8 register and build utility for Pyt ii python-dateutil1.4-1 powerful extensions to the standar ii python-excelerator 0.6.3a-3.1module for reading/writing Excel s ii python-glade2 2.12.1-6 GTK+ bindings: Glade support ii python-gobject 2.14.2-1 Python bindings for the GObject li ii python-gtk22.12.1-6 Python bindings for the GTK+ widge ii python-matplotlib-data 0.98.3-4 Python based plotting system (data ii python-numpy 1:1.1.0-3 Numerical Python adds a fast array ii python-pyparsing 1.5.0-1 Python parsing module ii python-qt3 3.17.4-1 Qt3 bindings for Python ii python-qt4 4.4.2-4 Python bindings for Qt4 ii python-tk 2.5.2-1 Tkinter - Writing Tk applications ii python-tz 2008c-2 Python version of the Olson timezo ii python-wxgtk2.62.6.3.2.2-3 wxWidgets Cross-platform C++ GUI t ii tcl8.4 8.4.19-2 Tcl (the Tool Command Language) v8 ii tk8.4 8.4.19-2 Tk toolkit for Tcl and X11, v8.4 - ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages python-matplotlib recommends: ii dvipng1.11-1 convert DVI files to PNG graphics Versions of packages python-matplotlib suggests: ii ipython0.8.4-1 enhanced interactive Python shell ii python-configobj 4.5.2-1 a simple but powerful config file ii python-enthought-trait 2.0.5-1 Manifest typing and reactive progr ii python-matplotlib-doc 0.98.1-1+lenny1.1 Python based plotting system (docu ii python-scipy 0.6.0-12 scientific tools for Python ii texlive-extra-utils2007.dfsg.2-3 TeX Live: TeX auxiliary programs ii texlive-latex-extra2007.dfsg.7-1 TeX Live: LaTeX supplementary pack -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503345: locale= mount option, hal and ntfs-3g
Adam Cécile (Le_Vert) wrote: Hello Michael, Go ahead with a NMU. It'll be faster and I really think this bug should be fixed asap. Hi Adam, attached is the complete diff of the NMU. If you have no objections, I'd go on with the upload this evening. Cheers, Michael -- Why is it that all of the instruments seeking intelligent life in the universe are pointed away from Earth? diff -u ntfs-3g-1.2531/debian/rules ntfs-3g-1.2531/debian/rules --- ntfs-3g-1.2531/debian/rules +++ ntfs-3g-1.2531/debian/rules @@ -56,9 +56,6 @@ dh_installdirs mkdir -p $(CURDIR)/debian/tmp/sbin $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp - # Install hal fdi file - install -D -m 644 debian/20-ntfs-3g-policy.fdi \ - debian/tmp/usr/share/hal/fdi/policy/10osvendor/20-ntfs-3g-policy.fdi # Remove RPATH from binary chrpath --delete debian/tmp/usr/bin/ntfs-3g chrpath --delete debian/tmp/usr/bin/ntfs-3g.probe diff -u ntfs-3g-1.2531/debian/changelog ntfs-3g-1.2531/debian/changelog --- ntfs-3g-1.2531/debian/changelog +++ ntfs-3g-1.2531/debian/changelog @@ -1,14 +1,3 @@ -ntfs-3g (1:1.2531-1.1) unstable; urgency=low - - * Non-maintainer upload. - * The hal standard configuration no longer allows the 'locale=' mount option -for NTFS, as the Linux kernel NTFS driver does not support this option. -As a workaround we install our own fdi file 20-ntfs-3g-policy.fdi to -/usr/share/hal/fdi/policy/10osvendor which will add this mount option back -and make hal use ntfs-3g as default fs driver. - - -- Michael Biebl [EMAIL PROTECTED] Sat, 25 Oct 2008 14:28:01 +0200 - ntfs-3g (1:1.2531-1) unstable; urgency=low * New upstream release. reverted: --- ntfs-3g-1.2531/debian/20-ntfs-3g-policy.fdi +++ ntfs-3g-1.2531.orig/debian/20-ntfs-3g-policy.fdi @@ -1,13 +0,0 @@ -?xml version=1.0 encoding=UTF-8? - -deviceinfo version=0.2 - device -match key=volume.fstype string=ntfs - match key=@block.storage_device:storage.hotpluggable bool=true -merge key=volume.fstype type=stringntfs-3g/merge -merge key=volume.policy.mount_filesystem type=stringntfs-3g/merge -append key=volume.mount.valid_options type=strlistlocale=/append - /match -/match - /device -/deviceinfo signature.asc Description: OpenPGP digital signature
Bug#503386: libdirectfb-bin: wrong documentation in man page for option [no-]vt-switching
Package: libdirectfb-bin Version: 0.9.25.1-5 Severity: normal The documentation in the man page of directfbrc says, that vt-switching is disabled by default: | [no-]vt-switching |Allow to switch virtual terminals using Ctrl+Alt+F?. |This is an experimental feature that is usually disabled; |use at your own risk. This is not right: | static void config_allocate() | { | [...] | dfb_config-vt = true; | dfb_config-vt_switch= true; | dfb_config-vt_num = -1; | dfb_config-vt_switching = true; | [...] | } -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-6-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages libdirectfb-bin depends on: ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries ii libdirectfb-0.9-25 0.9.25.1-5direct frame buffer graphics - sha libdirectfb-bin recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503384: Form element INPUT not recognized on http://community.haskell.org/admin/account_request.html
Package: w3m Version: 0.5.2-2+b1 Severity: minor Using either emacs-w3m or plain w3m, the INPUT fields of the form at http://community.haskell.org/admin/account_request.html are not recognized. The line simply ends at Username:, Name: and E-mail address:. My first guess would be that this is because it uses an XHTML style input / instead of the SGML/HTML4 style input. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_AU.utf8, LC_CTYPE=en_AU.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages w3m depends on: ii libc6 2.7-14GNU C Library: Shared libraries ii libgc1c2 1:6.8-1.1 conservative garbage collector for ii libgpm21.20.4-2 General Purpose Mouse - shared lib ii libncurses55.6+20080830-1shared libraries for terminal hand ii libssl0.9.80.9.8g-13 SSL shared libraries ii zlib1g 1:1.2.3.3.dfsg-12 compression library - runtime Versions of packages w3m recommends: ii ca-certificates 20080809 Common CA certificates Versions of packages w3m suggests: ii man-db 2.5.2-3 on-line manual pager pn menunone (no description available) pn migemo none (no description available) ii mime-support3.44-1 MIME files 'mime.types' 'mailcap ii w3m-el-snapshot [w3 1.4.263+0.20080321-1 simple Emacs interface of w3m (dev pn w3m-img none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503387: kqemu raises kernel bug, crashed qemu with segfault
Subject: kqemu raises kernel bug, crashed qemu with segfault Package: kqemu Version: 1.4.0~pre1-1 Severity: important With the kqemu module already installed (with no options, just modprobe -v kqemu), I launched qemu as a non-privileged user like this and immediately got a segmentation fault: qemu -vnc 127.0.1.17:1236 -cdrom /srv/isos/openbsd/install43.iso -boot d -name openbsdtest -net nic -net user,hostname=openbsdtest -redir tcp:1265::22 -no-reboot -serial stdio -hdachs 6000,16,63 hda even more worrisomely, this raised the kernel's console contains this information: [ 101.581665] QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard [ 101.590428] KQEMU installed, max_locked_mem=188964kB. [ 181.199505] BUG: unable to handle kernel NULL pointer dereference at 0001 [ 181.208824] IP: [d8242d68] :kqemu:memcpy+0x18/0x30 [ 181.214074] *pde = [ 181.216270] Oops: 0002 [#1] [ 181.216270] Modules linked in: kqemu ipv6 video output ac battery loop button snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu401_uart via_ircc snd_rawmidi snd_seq_device i2c_viapro i2c_core snd irda soundcore crc_ccitt vt8231 via_agp parport_pc agpgart shpchp parport pci_hotplug pcspkr evdev ext3 jbd mbcache ide_disk ata_generic libata scsi_mod dock ide_pci_generic uhci_hcd via82cxxx via_rhine mii ide_core usbcore thermal processor fan thermal_sys [ 181.216270] [ 181.216270] Pid: 1834, comm: qemu Not tainted (2.6.26-1-486 #1) [ 181.216270] EIP: 0060:[d8242d68] EFLAGS: 00210246 CPU: 0 [ 181.216270] EIP is at memcpy+0x18/0x30 [kqemu] [ 181.216270] EAX: 002f EBX: d5f877e4 ECX: d5f877e4 EDX: [ 181.216270] ESI: 0001 EDI: d6341960 EBP: d6674974 ESP: d6e3de78 [ 181.216270] DS: 007b ES: 007b FS: GS: 0033 SS: 0068 [ 181.216270] Process qemu (pid: 1834, ti=d6e3c000 task=d6c7f000 task.ti=d6e3c000) [ 181.216270] Stack: d5f877e0 d6341960 d82420c3 0001 d5f877e4 d5f877e4 c02c26a0 [ 181.216270]c0214684 d6ca2a20 d6674974 d6341960 c016788c 003c d6341960 [ 181.216270]d6674974 c01677cb c01642ce d6c0d0a0 d6a3fbd4 d6e3df14 d6341960 [ 181.216270] Call Trace: [ 181.216270] [d82420c3] kqemu_open+0x41/0x53 [kqemu] [ 181.216270] [c0214684] misc_open+0xe6/0x13a [ 181.216270] [c016788c] chrdev_open+0xc1/0xf6 [ 181.216270] [c01677cb] chrdev_open+0x0/0xf6 [ 181.216270] [c01642ce] __dentry_open+0xff/0x1e7 [ 181.216270] [c01643d2] nameidata_to_filp+0x1c/0x2c [ 181.216270] [c016e285] do_filp_open+0x33d/0x648 [ 181.216270] [c0155ceb] handle_mm_fault+0x28e/0x5d2 [ 181.216270] [c011388e] do_page_fault+0x0/0x5ea [ 181.216270] [c01640f3] do_sys_open+0x40/0xb6 [ 181.216270] [c01641ad] sys_open+0x1e/0x23 [ 181.216270] [c01037b2] syscall_call+0x7/0xb [ 181.216270] === [ 181.216270] Code: 81 5c 88 00 00 89 d0 c1 e0 0c 03 01 f3 c3 90 8d 74 26 00 56 53 8b 4c 24 14 8b 74 24 0c 8b 5c 24 10 85 c9 74 10 31 d2 0f b6 04 1a 88 04 32 83 c2 01 39 ca 75 f2 89 f0 5b 5e c3 89 f6 8d bc 27 00 [ 181.216270] EIP: [d8242d68] memcpy+0x18/0x30 [kqemu] SS:ESP 0068:d6e3de78 [ 181.429379] ---[ end trace 3bf003b0170603af ]--- fwiw, this is on a machine with a VIA Samuel processor with 384MB of RAM: 0 [EMAIL PROTECTED]:~$ cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping: 3 cpu MHz : 800.063 cache size : 64 KB fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow bogomips: 1602.40 clflush size: 32 power management: 0 [EMAIL PROTECTED]:~$ cat /proc/meminfo MemTotal: 377932 kB MemFree:134332 kB Buffers: 62884 kB Cached: 152648 kB SwapCached: 0 kB Active: 167796 kB Inactive:62768 kB SwapTotal: 489972 kB SwapFree: 489972 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 15052 kB Mapped: 7972 kB Slab: 9184 kB SReclaimable: 6876 kB SUnreclaim: 2308 kB PageTables:424 kB NFS_Unstable:0 kB Bounce: 0 kB WritebackTmp:0 kB CommitLimit:678936 kB Committed_AS:55416 kB VmallocTotal: 655044 kB VmallocUsed: 2456 kB VmallocChunk: 652340 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB 0 [EMAIL PROTECTED]:~$ cat /etc/modprobe.d/kqemu options kqemu major=0 0 [EMAIL PROTECTED]:~$ COLUMNS=130 dpkg -l | grep qemu ii kqemu-common 1.3.0~pre11-8 Common files for the QEMU Accelerator module ii kqemu-modules-2.6.26-1-486 1.4.0~pre1-1+2.6.26-9 kqemu modules for Linux (kernel 2.6.26-1-486). ii kqemu-source
Bug#503340: Bug#502762: Bug#503340: emacs-goodies-el: etch to lenny upgrade fails
MJ On Sat Oct 25 08:25, Sven Joachim wrote: That is the same problem as in #502762, triggered by a Debian-specific patch that lets sendmail.el throw an error if neither sendmail nor /usr/bin/mail can be found, first reported and discussed in #429059. Since a sensible solution had already been proposed in #429059, I'm inclined to throw all these bugs together and assign them to the emacs22 package. Opinions? (mailcrypt maintainer here) As I've already said, I am for it. -- Ciao, Davide -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503029: problem recognized
I have recognized the problem I think. The issue occurs when you have cpu frequency scaling function activated. It appears when CPU was set to different frequency while inserting analog driver and different while reading joystick data (for example running a game). I think the problem is located in analog kernel driver and is related to usage of rdtscl() function to read time (in GET_TIME macro). This function returns number of clock ticks, not real time. So when cpu frequency changes the same difference (delta) of two reads is not the same difference of time (one clock lasts different time period). When the analog driver is loaded it computes some timing data that is used further while reading joystick state. When CPU frequency change occures it compares that timing data values with new timing reads which are differently scaled. A workaround (until the issue will be fixed) is to unload analog driver, set you CPU do fixed frequency, load the driver again an run you game. Regards Radek -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503388: lxterminal: should provide x-terminal-emulator
Package: lxterminal Version: 0.1.3-1 On a Lenny system I am setting up, the only terminal I need is lxterminal. xorg has problems with that because it wants a x-terminal-emulator installed. lxterminal should provide x-terminal-emulator. Thanks! signature.asc Description: Digital signature
Bug#503359: Processed: Re: Bug#503359: di-netboot-assistant should be able to run as a non-privileged user
Hi Franklin-- Thanks for the quick response! On Sat 2008-10-25 05:25:07 -0400, Franklin PIAT wrote: My primary implementation idea was to make the folders owned by the group staff (like /usr/local). Would that fit your need ? I'd rather not do that; membership in group staff is a huge privilege (because you can rewrite /usr/local, as you say, which means members could place a trojan in /usr/local/bin/ls, for example). So membership in that group is not something that is easily granted. I wonder why you defined DI_NETBOOT_ASSISTANT_CONFIG. Do you need to be able to use multiple configuration dir ? or would it be fine to use ~/.di-netboot-assistant.conf (then fall back to /etc/... ) Ah, this makes more sense than what i did. As long as a user-supplied config file is possible (so DL_CACHE, STATUS_LIB and CONFIG_DIR can be overridden), the tool can be run cleanly as a non-privileged user. It should probably fail cleanly if the user is unable to write to DL_CACHE or STATUS_LIB, though. Would you like me to submit a new patch that works this way? Regards, --dkg pgpGyLTmKUlBh.pgp Description: PGP signature
Bug#258064: gnome-ppp resolvconf
*Bump* Is gnome-ppp alive? It would be great if resolvconf and gnome-ppp could both be installed. Thanks. signature.asc Description: Digital signature
Bug#485064: clock-setup works with kernel 2.6.26
Package: clock-setup Followup-For: Bug #485064 I have just tested this hwclock bug on a Thinkpad T61, using the DI build : 5.0 (lenny) - installer build 20081023-09:05 which uses clock-setup 0.97, kernel 2.6.26, and util-linux 2.13.1.1-1. The problem didn't show up. Franklin -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503390: directvnc: assumed documentation error in README.Debian
Package: directvnc Version: 0.7.5-8+b1 Severity: minor In /usr/share/doc/directvnc/README.Debian, the following is stated: The display size is limited to 640x480. This seems not to be correct, cause I couldn't find any maloperations using other resolutions (e.g. 1024x768) until now. This does not mean, I fully tested it, so I might be wrong, but other resolutions seem to work correctly using Xvnc4. The main problem for me was to find out, where the resolution configuration can be done. directvnc is based on directfb. This fact is althoght mentioned in the man page of directvnc. Not mentioned is the importance of libdirectfb for configuring directvnc by creating the library specific configuration file /etc/directfbrc or the program-specific configuration file /etc/directfbrc.directvnc It would be helpfull to mention in the documentation, that directvnc is based on directfb and so many of the configuration stuff can be done in /etc/directfbrc and /etc/directfbrc.directvnc and that one should read the manpage of directfbrc (5) in the libdirectfb-bin package for further configuration options. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-6-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages directvnc depends on: ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries ii libdirectfb-0.9-25 0.9.25.1-5direct frame buffer graphics - sha ii libjpeg62 6b-13 The Independent JPEG Group's JPEG ii zlib1g 1:1.2.3-13compression library - runtime directvnc recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#503389: kiki-the-nano-bot: segfaults (a bit complex to reproduce)
Package: kiki-the-nano-bot Version: 1.0.2+dfsg1-1 Severity: normal No, this doesn't make sense, it just makes kiki crash. (Syntax: $ is shell prompt, (gdb) is gdb prompt and # is my comments) $ rm ~/.kiki.hsc $ gdb kiki-the-nano-bot ... (gdb) run ... # select NEW GAME by pressing enter # go to menu by pressing esc # go to LOAD LEVEL by pressing down down enter # select level by pressing enter --- KikiController::KikiController :: kiki_home /usr/share/games/kiki-the-nano-bot/ ... Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x2abce3663760 (LWP 6356)] 0x004253d6 in ?? () (gdb) bt full #0 0x004253d6 in ?? () No symbol table info available. #1 0x004228b2 in ?? () No symbol table info available. #2 0x00425ba0 in ?? () No symbol table info available. #3 0x0046af59 in ?? () No symbol table info available. #4 0x0046acdc in ?? () No symbol table info available. #5 0x00437e7f in ?? () No symbol table info available. #6 0x2abcdf1e01a6 in __libc_start_main (main=0x437e30, argc=1, ubp_av=0x7fffcda12f28, init=0x48ff50, fini=value optimized out, rtld_fini=value optimized out, stack_end=0x7fffcda12f18) at libc-start.c:222 result = value optimized out unwind_buf = {cancel_jmp_buf = {{jmp_buf = {4783952, -8526115296498811342, 4225936, 140736643280672, 0, 0, 8526083812796005938, -2534231968335528398}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x1, 0x437e30}, data = {prev = 0x0, cleanup = 0x0, canceltype = 1}}} not_first_call = value optimized out #7 0x00407bb9 in ?? () No symbol table info available. #8 0x7fffcda12f18 in ?? () No symbol table info available. #9 0x001c in ?? () No symbol table info available. #10 0x0001 in ?? () No symbol table info available. #11 0x7fffcda137a2 in ?? () No symbol table info available. #12 0x in ?? () No symbol table info available. (gdb) Hope it helps Helmut -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.23.14 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/dash Versions of packages kiki-the-nano-bot depends on: ii freeglut3 2.4.0-6.1 OpenGL Utility Toolkit ii kiki-the-nano-bot-data 1.0.2+dfsg1-1 Kiki the nano bot - game data ii libc6 2.7-15GNU C Library: Shared libraries ii libgcc11:4.3.2-1 GCC support library ii libgl1-mesa-glx [libgl1] 7.0.3-6 A free implementation of the OpenG ii libglu1-mesa [libglu1] 7.0.3-6 The OpenGL utility library (GLU) ii libsdl-image1.21.2.6-3 image loading library for Simple D ii libsdl-mixer1.21.2.8-5 mixer library for Simple DirectMed ii libsdl1.2debian1.2.13-4 Simple DirectMedia Layer ii libstdc++6 4.3.2-1 The GNU Standard C++ Library v3 ii python2.5 2.5.2-11.1An interactive high-level object-o kiki-the-nano-bot recommends no packages. kiki-the-nano-bot suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#496269: relevant upstream gvfs-fuse commit.
On Mon, Oct 20, 2008 at 11:20:19AM +0200, Andreas Henriksson wrote: see upstream revision 2056 for possible fix: http://svn.gnome.org/viewvc/gvfs?view=revisionrevision=2056 Brian, can you test the packages at http://people.debian.org/~schizo/gvfs/ and see if that patch helps with your problem? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#481493: [Bug #481493] Fixed by, maybe, #494546
notfound 481493 2.6.26-7 thanks This bug (#481493) is fixed to me in last Kernel Update in Lenny. I think that root cause is: * Fix ACPI EC GPE storm detection. (closes: #494546) How we can see in Fabio message (LKML), some battery issues is reported about this: http://lkml.org/lkml/2008/7/19/19 Best regards, Renato -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]