Re: VPN
Hallo, Andreas Kretschmer schrieb: Was ist 'MAC-Maschine'? Das mit dem Apfel-Logo OpenVPN wurde von mir vorgeschlagen, aber wg. b) verworfen. Schade. Ja. Am liebsten würde ich das Wort mit dem ei in der Mitte schreien. Hat jemand von euch so etwas mit mehreren Netzwerkkarten schon mal gemacht? Über jeden Tipp würde ich mich freuen. Die 5 Netzkarten sind nicht das Problem, das Problem ist: - IPSec != IPSec. Da gibt es zu viele Implementierungen und Protokolle. - In Deiner Konstellation wirst Du mit iptables einiges regeln müssen, leider ist das IPSEc von Linux 2.6 abartig krank: im Gegensatz zu FreeSWAN unter 2.4 hast Du keine virtuellen ipsecX-Devices. Oh Himmel, auf was muß ich mich da einlassen... es gibt einen Patch (von zwei Komilitonen von mir als Master bzw. Diplom-Arbeit entwickelt), der die (virtuellen-) Devices in 2.6 wieder einbaut wie aktiv das Projekt allerdings ist weiss ich nicht http://ipsec.hsnr.de mfG Peter Bartosch -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Frauen von Linuxern [OT, OT, OT]
Hallo, Am 2005-12-22 12:59:52, schrieb Heino Tiedemann: Matthias Haegele [EMAIL PROTECTED] wrote: BTW: @ Michelle du bist schon female oder?. ;-). Siehste, das denken alle. ich hab mir diese Frage auch schon mal gestellt. Michelle - ist das nicht ein französischer Männername? Dem Micheal im deutschen gleichbedeutend? Michele (mit einem l und ohne Akzent) ist ein italienischer Männer-Name Michèle ist französisch und weiblich. Michelle (zwei ll) ist die deutsche (!) Form der französischen Michèle. nun ich kenne noch: Michèl und er ist definitiv männlich! mfG Peter Bartosch -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Erfahrungen mit Fernbedienung?
Hallo, Hm, PDA / WLan / Handy erscheint mir etwas übergroß, nur um Musik steuern zu wollen. Ich habe hier eine USB Fernbedienung gesehen, die per funk funktioniert. http://cgi.ebay.de/Fernbedienung-Funk-u-Infrarot-PC-u-Multimedia-lernf_W0QQitemZ8708796136QQcategoryZ38861QQrdZ1QQcmdZViewItem Das Problem wäre damit also darauf reduziert einen linux treiber dafür zu finden. Ich weiß nicht wo ich da anfangen soll, irgendwelche Hinweise? LIRC (linux infra red control (sp?)) mfG peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Funktionsweise usbmount [was: Probleme mit USB]
Hallo, On 11.Nov 2004 - 15:40:38, Martin Dickopp wrote: Andreas Pakulat [EMAIL PROTECTED] writes: Ach und wie wird das mit dem unmounting gemacht? Wenn ich naemlich die USB-Geraete einfach abziehe dann kann nichts mehr ungemountet werden und somit hab ich FS-Inkonsistenzen. Es wird sync gemountet, und wenn das Ger?t abgezogen wird, wird lazy ungemountet. Hab das Programm grad ausprobiert: Erster Eindruck ist prima, bis auf das umount. Da waere jetzt die Frage wann das stattfinden soll? udev kriegt das entfernen ja mit und loescht die devices, da wuerde ich annehmen, dass zu diesem Zeitpunkt auch dein usbmount mit remove-Parameter aufgerufen wird. Tuts aber nicht, auch nachdem die Devices weg sind ist noch nicht ungemountet. wie wäre ein unmount sobalt nicht mehr auf den mountpoint zugegriffen wird? --- automounter Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Keine Pipe, kein Gr
Hi! Hallo zusammen, seit einem dist-upgrade vor ein paar Wochen funktioniert bei mir die Taste mit den Zeichen (Größer, Kleiner, Pipe) nicht mehr unter X. In einer anderen Konsole funktioniert sie einwandfrei. Mein System ist ein Debian testing und folgende Einstellungen befinden sich für die Tastatur im XF86Config-4: Section InputDevice IdentifierGeneric Keyboard Driver keyboard OptionCoreKeyboard OptionXkbRulesxfree86 OptionXkbModelpc105 OptionXkbLayoutde OptionXkbVariantnodeadkeys EndSection KDE? dann musst du im Kontroll-Zentrum auch noch Tastaturlayout PC105 einstellen Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: CD-Rom
Hi! On Tue, 04 May 2004 23:50:13 +0200, Markus M. May [EMAIL PROTECTED] wrote: Hallo, ich habe ein Sony PCG-GRX616 Laptop mit einem DVD-Player /CD-RW Laufwerk. Dies wir vom Kernel auch korrekt erkannt (siehe weiter unten). Jedoch habe ich kein /dev/hdc oder etwas ähnliches. Ich habe in der lilo.conf ein append=hdc=ide-cd eingefügt, das bringt jedoch auch nichts. Irgendwelche Hilfen? Muss das nicht hdc=ide-scsi heißen? nur wenn man die SCSI Emulation für IDE-Geräte benutzen möchte - neuere cdrdao/cdrecord Versionen können aber inzwischen nativ auf IDE-Brenner zugreifen Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: HOWTO post?
Hi! Hi, ich habe mich auf debian.org in dieser Liste angemeldet und auch die confirm mail abgeschickt. Denoch kann ich nicht in linux.debian.user.german posten, obwohl ich für meinen NNTP-account die gleiche Mailadresse verwende. mail adresse für NNTP? Kommt diese Mail hier jetzt an? Kann ich etwa nur per Mail auf die Liste posten? Wozu ein NNTP-Gateway, wenn es nur in eine Richtung funktioniert? weil usenet-Mail gateways nicht gerne gesehen sind (u.a. wegen SPAM) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: HOWTO post?
Hi! Am Donnerstag, 15. April 2004 12:46 schrieb Peter Bartosch: [...] weil usenet-Mail gateways nicht gerne gesehen sind (u.a. wegen SPAM) Ist doch eigentlich völlig wurst, die debian-users-Liste ist doch sowieso die zugespammteste aller Listen weit und breit (über das warum könnte man sich ja Gedanken machen;-)) mag sein - dank spamassassin bekomm' ich davon nix mit aber moderator auf 'ner debian liste möchte ich auch nicht sein (hmm, ok debian-news vielleicht ;-) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: WLAN will nicht so recht
Hi! Hi, hatte ja schon gefragt wegen WLAN Karten unter Linux. Naja mit den hier erhaeltlichen kam ich nicht weite - alle zu neu mit den falschen Chipsaetzen. Hab mir dann doch wieder ne Netgear (die die ich schon hatte) gekauft. Ergebnis ist: In meinem Zimmer geht nach wie vor keine WLAN!!! Das laesst mich annehmen das ploetzlich das Signal zu schwach ist. Das merkwuerdige ist: Mit dem eingebauten Centrino-WLAN unter Windows gehts wunderbar... Mein Mitbewohner mit seiner D-Ling DWL-G630 hat auch keine Probleme Als WLAN-Router fungiert das HomePortal1000 das uns SBC fuer den DSL-Zugang gegeben hat... Also es sind die Fachleute fuer WLAN gefragt: Warum kann ich seit Di. Abend in meinem Zimmer nicht mal mehr ne IP holen - Mo gings noch ohne Probleme. Paketupdates gabs zwischendurch zwar aber die hab ich schon gecheckt. kern.log gibt leider nichts her... läuft in der Nähe vielleicht eine Home-Cinema-Audio-Funkübertragungs-Strecke? Die Dinger senden auf dem gleichen Frequenzband wie WLAN-Karten. Was heist falsche Chipsätze? afaik bekommt man _jede_ Wlan-Karte zumindest mit dem NDIS-Wrapper unter Linux zum Laufen (so auch meine MSI54G) - wenn es auch hin-und-wieder zu Verbindungsabbrüchen kommt. Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: [3] Meine .procmailrc wegen mehrfachen anfragen
Hi! Argg, Der Spam-Filter auf 'murphy' funktioniert, Ich kann meine .procmailrc nicht posten Nun zum dritten male, aber nun als bz2-Attachment... Hallo Leute, wegen mehrfachen/vielfachen Anfragen, sende ich hier einen Auszug meiner ~/.procmailrc. Sie wurde erst gestern erneuert und den neuen Virus-Gegebenheiten angepaßt. in dem Nigeria SPAM -Teil sind (vermutlich) deine Pfad-Angaben etwas fehlerhaft - _ muß durch / ersetzt werden also NIGERIA/my_filter/ Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: useradd - adduser und NIS System
Hi! Jan Lühr schrieb am 27.01.2004 um 18:00:54 +0100: Hallo Jan, zur Zeit habe ich das Problem dass, useradd auf einem NIS Server die Benutzer nur im lokalen Teil der NIS Datenbank einträgt nicht aber im NIS-Teil der Datenbank. Wie kann ich useradd dazu bewegen, dass ganze in den NIS-Teil zu legen? Beim lesen von dokus bin ich über adduser gestolpert. Anscheinend ist das etwas flexibler und durch ein kleines Script, dass nach dem Anlegen des Benutzers ausgeführt wird, ließe sich das Problem beheben. Gibt es sonst noch unterschied zwischen den beiden? (Warum gibt es eigentlich die beiden?) Eigentlich würde ich gerne bei useradd bleiben, aber adduser sieht auch nett aus... Welches würdet ihr empfehlen? was ist denn der lokale Teil einer NIS-Datenbank? Die 'Datenbanken' sind bei NIS auf dem Server und sonst nirgendwo. OK vielleicht noch auf einemm o. mehreren Slave-Servern. Aber die heissen ja nicht umsonst auch Server. Auf dem Client, temporaer vorhanden, sind max. die vom Server ge'push'ten NIS-Tabellen. Je nachdem was Du verwendest z.B passwd, hosts, netgroup ... ich vermute: lokaler Teil - über dem +: Eintrag - login nur lokal möglich (login (?) bricht die suche nach usern bei +:: ab) globaler Teil - unter dem +: Eintrag - login auch remote möglich (abfrage per NIS) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Virus???
Hi! Da läuft wohl eine Diskussion, ob nicht generell _alle_ Attachments weggeworfen (haben in einer ML eigentlich ja auch nichts zu suchen) und html-Mails nach plaintext konvertiert werden sollten. Da bin ich auch bei debian-* dafür... lustig, auf debian security wurde es gerade auch vorgeschlagen. Da kontern einige jetzt, dass man dann keine Logfiles/Patches/... mehr schicken könnte. Wie kommen die denn darauf? Logfiles sind doch Plain Text, kann man also einfach in die Mail packen, braucht man nichtals Attachment zu machen. Zumal so vermutlich eher nur die relevanten Dinge gepostet werden. Und Patches sollte man eh im Source verschicken, damit jeder sieht was Sache ist und es für unterschiedliches Architekturen brauchbar ist. Also auch Plaintext. Ich glaube aber nicht, das jeder der den Patch anwenden möchte, die Zeilen erst per Copy-And-Paste in eine eigene Datei kopieren will Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Zwischen zwei X-Server
Hi! Hi! Ist es möglich, bzw. wie ist es möglich, über Netzwerk zwischen zwei X-Servern hin- und herzuschalten? Auf Rechner A ist User A eingeloggt, auf Rechner B ist User B eingeloggt. Kann User A sich den gesamten Bildschirm, den User B vor sich hat (Desktop, WM etc), mit dessen Erlaubnis auf seinem Monitor anzeigen lassen, und in der Umgebung von User B über Netzwerk arbeiten? Was ich jetzt so gefunden hatte war, dass man sich komplett auf einem anderen Rechner einloggen kann, jedoch nicht, ohne sich auszuloggen von dem einen zum anderen umschalten kann... Kann mir da wer behilflich sein, bzw. einen Hinweis geben, womit das gehen könnte? such' mal nach vnc Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Zugriffe auf den SSH Port
Hi! Guten Abend Zusammen, sshd[1362]: Did not receive identification string from :::80.1*5.18*.22* Solche Einträge habe ich seit Heute mit unterschiedlichen IP Adressen. Hat das noch jemand ? ich hab's nicht, aber das könnte jemand sein, der einen SSH-exploit ausprobiert ... gibt's da was neues? Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
gkrellm and SMP
hello, I'm running gkrellm on a SMP box (dual Celeron, Abit BP6) and it uses 60-70% of one CPU. Otherwise on a single-CPU box it only uses ~3%? Is gkrellm not SMP save? I'm using unstable Peter PS: sorry for my earlier german post -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
gkrellm auf SMP Maschine
Hallo Liste, Ich habe hier gkrellm im Einsatz. Nur lastet das meinen Server (Dual Celeron 466, Abit BP6) auf einer CPU zu ca. 60% aus, was auf einem Single-Prozessor-Rechner nicht der Fall ist (ca 2-3%). Ist gkrellm nicht SMP-Save? gkrellm Version 2.1.24-1 aus unstable Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: dvd Kombo mit cdbrenner
Hi! Alexander Schmehl [EMAIL PROTECTED] wrote: Hi Alexander, Sowohl /dev/cdrom als auch /dev/dvd sind beides nur symbolische Links auf das echte Gerät (/dev/hdc oder /dev/scd0 oder so ähnlich, bei Brenner vermutlich eher letzeres). Mit 2.6er Kernel und aktuellem cdrecord braucht man fürs Brennen aber keine scsi-emu mehr:) geht auch nur mit cdrecord (mit 2.4er) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re:
Hi! Hallo, welche Docu, habe ich vergessen zu lesen wenn nach dem booten folgendes passiert? # lsmod lsmod: QM_MODULES: Function not implemented ein # modconf beibt volkommen leer, keine Module zum laden vorhanden. die schnittstelle zum laden von modulen hat sich bei 2.6er kerneln geändert du musst das module-init-tools paket installieren, das ist ein wrapper, der erkennt, welche kernel-version installiert ist (2.4 oder 2.6) und dementsprechend handelt Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: fetchmail/mutt problem (no diskspace free)
Hi! Hallo Leute, bin gerade hier am herumhünern mit ein paar MByte großen Dateien in /var/mail/... Mir ist fogedes passiert: Meine /home Partition des fileservers war voll und fetchmail hat selbständig wie gewohnt E-Mails abgeholt, währnd ich ein bishen im Krankenhaus war... Die Warn-Mail vom System hat mich erst heute erreicht... Nun habe ich für mehrwere $USER in /var/mail/ ein paar Mailbox- Dateine liegen, die ich mit mutt nicht öffnen kann: Keine Mailbox Wenn ich mir die Datei ansehe, dann sind die Mails vollständig, allerdings fehlen die einführenden From [EMAIL PROTECTED] Zeilen, weshalb sie von mutt nicht als Mailbox-Datei erkannt wird. Kleine Dateien habe ich bereits von Hand in Maildir verwandelt, aber meine eigenen hat 27 MBytes !!! Das sind ein paar tausend Messages... Wie kann ich das wieder hinbiegen ??? vielleicht mit: ### ### strip and generate a new From-line for each mail ### :0 fhw | formail -I From -a From (aus meiner procmailrc) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: AVI in DV umwandeln...?
Hi! Moin.. kentt jm. n Prog mit dem ich avi/MPG files in DV-Files umwandeln kann? transcode Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Prozessorger
Hi! [...] kannst du nur probieren in welchem pci-slot die karte am weitesten der internen störquelle entfernt ist ...die eigentl. störquelle im rechner kann überall sein (grafik/netzteil/modem u.s.w.) ...ein computer funktioniert nunmal digital ..und ein analoges signal hat dort normalerweise nix zu suchen ... Du hast dir schon mal die Signale in einem Rechner mit dem Oszi angeschaut? - Dann würdest du da ganz schnell anders denken! Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: swap voll - ram leer ?!?
Hi! [..] Hab hier einen Rechner, Debin 3.0, Kernel 2.4.20, 1GB Ram ohne High-Mem Support, 256MB Swap. Der Arbeitsspeicher ist meist zu 30% voll. Die Swappartion aber ist meist um die 60% voll. Ich verstehe nicht ganz, warum soviel Swap belegt ist. [...] Hmm, dachte ich hätte eine Antwort gefunden - Aber es kann doch ned sein, das der Swap heut auf einmal zu 89% voll ist. Der Arbeitsspeicher ist kaum belegt, der Rechner hat auch keine Last. Das würde ja bedeuten, das innerhalb einer Wocher der Swap von 40% auf 89% gefüllt wird OHNE das neue Prozesse hinzukommen. Irgendwie versteh ich da was ned.. es sind ja nicht nur die Programme, die ausgelagert werden, sondern auch Daten (statische, und dynamisch erzeugte) der Programme landen im swap Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: OT: raid1 mit verschieden gro
Hi! Horrido, obiges habe ich schon mal mit zwei sehr unterschiedlich schnellen und großen Platten probiert, mit dem Ergebnis, dass bei Schreibzugriffen die langsame Platte die schnelle ausbremste. Hätte man sich vorher denken können, ich weiss... Ich möchte ein raid1 mit zwei etwa gleich schnellen, unterschiedlich großen Platten aufsetzen. Die kleine Platte (18GB) und die ersten 18GB der Großen sollen symmetrisch angelegt und als raid1 eingerichtet werden. Den überstehenden Teil der größeren Platte will ich für weniger wichtige Daten nutzen. Hat eine(r) von euch sowas mal in Gebrauch gehabt? Taugt das? ob das taugt, musst du für dich entscheiden - ist halt das Risiko, die daten auf dem Rest zu verlieren, grösser, als bei dem Mirror Funktionieren tut das allemal (habe das in diversen konfigurationen hier schon am laufen gehabt Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Getting rid of MS XP
Hi! On Mon, Dec 08, 2003 at 10:08:01PM -0500, Johann Koenig wrote: I was unaware that there were 7 flavours ;) If you're going cross architecture, yes. Or way back in time. well let's see: rex, bo, hamm, potatoe, slink, sarge and sid Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: 2.Computer als Datenbunker ?
Hi! Hallo, mal gefragt, auf einem zweiten Computer habe ich drei Festplatten a 120 GB drin, ein CD-Laufwerk zur Installation und eine Ethernetkarte. Der Computer braucht keinen Bildschirm, keinen Drucker, soll nur an einem ersten Computer als Datenbunker dranhängen. geht das? generell Ja Die Ethernetkarte des ersten Gerätes ist DHCP-eingerichtet über einen DSL-Router, geht die dann überhaupt noch als Verbindung zu dem Datenbunker, oder sollte ich eine zweite Karte einbauen, die nicht DHCP hat, ebenso die Ethernetkarte von dem Daten-PC ? kann der DHCP-Server so eingerichtet werden, das er die IP anhand der MAC-Adresse zuordnet? Statisches DHCP Wie sollte ich die Ethernetkarten überhaupt einrichten? Nur mit IP-Nummer und Maske, keinen Gateway? Gateway braucht der Rechner nicht, ev. wenn noch andere Dienste drüber laufen sollen (Proxy o.ä.), dann schon Wieviel Linux braucht der Daten-PC dann überhaupt, reicht ein Mini-DEbian ohne X-Windows mit nfs-Modul, Ethernet-Modul und CD-Treiber im Kernel? IMHO JA Wie kriege ich den zweiten PC dazu, auch ohne Tastatur dann hochzufahren, damit eben bloß der Kasten mit dem Ethernetkabel unterm Schreibtisch steht? im bios nach Halt on all errors suchen und ausschalten oder auf all but keyboard setzen Wie ich den Datenbunker auf dem ersten PC mounte, ist mir klar, aber geht der Datenbunker so einzurichten, dass ich ihn nur anschalte und er fährt so hoch, dass er ohne weiteres Zutun für den anderen zugriffsfähig ist? selbstredend ... Gruss Peter genau ;-) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Telefonanlagen und der serielle Port...
Hi! On 2003-08-04 17:17:01, Werner Gast wrote: Am Mon, 2003-08-04 um 16.45 schrieb Marcus Jodorf: Hallo beisammen, ich habe es gerade mit meiner alten Xi520 von der Telekom ausprobiert: cat /dev/ttyS0 liefert mir die Gespraechsdaten. Das laesst sich doch auch in eine Datei umleiten. Ist das nicht das, was gesucht wird? Hallo Werner, das haben wir alles ausprobiert... Das kommt nur teilweise an, sprich zehacksückelt und mit jede menge Fehlermeldungen. riecht für mich nach fehlerhaften Parametern (Boude-Rate, Stoppbits, Parität oder Flow-Control) Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: backup Tape mit tar
Hi! Hey, dachte zuerst auch, das es ein problem mit der Hardwar wäre, aber dann würde das Backup mit dem Programm Taper ja nicht einwandfrei funktionieren ... !! Davon abgesehen ist alles richtig angeschlossen und der Terminator hängt am Ende des SCSI Bus direkt hinter der HDD mit der ID 0, das Bandlaufwerk hat die ID 2 . Welchen Sinn macht den dsa device /dsev/nst0 ? non rewinding device !! Damit kann ich nciht wirklich was anfangen .. das dient ganz einfach dazu, nach dem sichern, das Band nicht zurückzuspulen im Gegensatz dazu spulen /dev/st* das Band nach dem Zugriff (?) zurück Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: MP3 Streams in der console anh
Hi! On Son, Jul 20, 2003 at 12:53:22 +0200, Frank Dietrich wrote: Hallo Florian, Hallo Probiere es mal so mpg123 http://38.144.33.148:1060/ Habe ich. Danke Dir. Das funktioniert zwar mit Streams, deren Adresse lediglich aus einer Ip und einem Port bestehen, aber andere Streams wie http://64.236.34.141:80/stream/1012 kann ich so leider nicht anhören. Hat jemand vielleicht noch eine Idee, wie man das realisieren könnte? Danke schon mal. schon mal mplayer versucht? Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: 200 GB mit samba sharen?
Hi! On 04.Jul 2003 - 09:23:09, Peter Bartosch wrote: Hi! On 03.Jul 2003 - 21:53:21, Hans-Georg Bork wrote: Moin, On Thu, Jul 03, 2003 at 02:48:16AM +0200, Ingo Pflanz wrote: [...] ein ordentliches betriebssystem (z.b. linux oder winNT/2k/xp) spricht ^^^ ^^^ meinst Du das etwa ernst? ;-) Wenn man mal von M$-Hass absieht, so schlecht ist weder XP, not 2K. NT kenne ich nicht, aber auch das ist nicht sooo schlecht. ich glaube diesen Satz solltest du nochmal überdenken? 1.Wieso zerhackt dein Mail-System meinen Satz derart. 2. Wieso soll ich den Satz überdenken? Ich weiss auch das Windows sicher nicht das Gelbe vom Ei ist, aber genauso gibts bei Linux hier und da Dinge die einfach (noch) nicht gut funktionieren - mir fällt da auf Anhieb z.B. die total scheussliche ide-scsi Geschichte ein, für Brenner. naja, einerseits habe ich das SCNR vergessen, der Satz wird zerhackt, weil die PUTTY-Terminal-Emulation, in der ich im Moment schreibe, die Umlaute nicht richtig darstellt, bzw übermittelt (vielleicht ist's auch die Kombination von PUTTY mit screen) Das was ich meine/meinte das du überdenken müsstest, ist die Aussage kenn' ich nicht, aber ist auch nicht sooo schlecht du siehst den wiederspruch, nicht? Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: 200 GB mit samba sharen?
Hi! On 03.Jul 2003 - 21:53:21, Hans-Georg Bork wrote: Moin, On Thu, Jul 03, 2003 at 02:48:16AM +0200, Ingo Pflanz wrote: [...] ein ordentliches betriebssystem (z.b. linux oder winNT/2k/xp) spricht ^^^ ^^^ meinst Du das etwa ernst? ;-) Wenn man mal von M$-Hass absieht, so schlecht ist weder XP, not 2K. NT kenne ich nicht, aber auch das ist nicht sooo schlecht. ich glaube diesen Satz solltest du nochmal überdenken? Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: integer groesser 2^31 in C
Hi! Hi, fuer ein Finite-Element-Programm in C, muesste ich unbedingt mehr als 2Gb Speicher allokieren. Der Rechner hat 2Gb Speicher und 2Gb Swap. Ich habe erst gedacht, es liegt am Kernel (CONFIG_HIGHMEM ist gesetzt), habe jetzt aber festgestellt, dass es nicht moeglich ist in C eine Integer zu deklarieren, die groesser als 2^31 ist. AFAIK ist int immer Prozessor-Register breite - 32Bit int - 31Bit + Vorzeichen unsigned int - 32 Bit Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: How to count actual users?
Hi! on Wed, Jun 25, 2003 at 01:03:00AM +0200, Paul Wright ([EMAIL PROTECTED]) wrote: Hi All, I've been attempting to estimate how many Linux users there are and I've come accross too many differing statistics. I decided that it may be easier to get a reasonable count of how many known users of Debian can be counted by the number of unique email addresses have suscribed to the lists hosted here. Does anyone know the number? Could it be posted to this list? It may be usefull as a statistic for Debian advocacy. Ask everyone who uses GNU/Linux to raise their hand. Could i lower it now, please? Typing is bad with only one hand! SCNR Peter -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Netzwerkkarte zum Switch wird auf full-duplex gesetzt... Fehler
Hi! [...] Mit den 3 com Dos Tools habe ich beide Karten am Router auf Automatic gesetzt also MediaTyp und Transceiver-Type = AUTO Die zwei Karten eth0 3c905b (Auto 10/100 MBit) diese haengt am Switch und die eth1 3c509b (10MBit) habe ich lediglich den Tranceiver Typ fest auf TP 10MB gesetzt, was anderes wuerde ja auch keinen Sinn machen, da ich ja nicht ueber Kojax gehe. Diese Karte ist mit dem Modem verbunden. Weiss jemand ob das, damals uebereignete T-DSL Modem, half- oder auch voll duplex kann?. Also meines wissens nach machen die nur 10 MBit, als Half-Duplex. Aus kostengruenden wurde an den 100 MBit gespart. Noch schlimmer, das Modem (bzw der Treiber) macht aus der NIC eine Serielle Karte Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Fehler: char-major-10-135
Hi! Sabine Schulz [EMAIL PROTECTED] schrieb: Ich wurde darauf hingewiesen, daß ich bei der Installation den falschen Kernel genommen habe, Handbuch S. 41/42 ist mir wohl irgendwie entgangen. Linux ist für mich noch ein Buch mit sieben Siegeln, nur mal so am Rande: läßt sich der Kernel für einen absoluten Anfänger wie mich problemlos austauschen oder muß ich neu installieren? Das geht problemlos, weil auch der Kernel ins Paketmanagement einbezogen ist. Allerdings kann man nicht gleichzeitig zwei unterschiedliche Kernel mit der selben Versionsnummer installiert haben (warum eigentlich nicht? Es gibt jedenfalls Fehlermeldungen, wenn man es versucht). der kernel selber ist das Problem, die jeweilige Kernel-version sucht die Kernel-Module unter /lib/modules/kernel-ver/... bei gleicher Version, aber unterschiedlichen Treibern haben diese unterschiedliche Linkpoints zum jeweilgen Kernel Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Fehler: char-major-10-135
Hi! Peter Bartosch [EMAIL PROTECTED] schrieb: Das geht problemlos, weil auch der Kernel ins Paketmanagement einbezogen ist. Allerdings kann man nicht gleichzeitig zwei unterschiedliche Kernel mit der selben Versionsnummer installiert haben (warum eigentlich nicht? Es gibt jedenfalls Fehlermeldungen, wenn man es versucht). der kernel selber ist das Problem, die jeweilige Kernel-version sucht die Kernel-Module unter /lib/modules/kernel-ver/... bei gleicher Version, aber unterschiedlichen Treibern haben diese unterschiedliche Linkpoints zum jeweilgen Kernel Ja, ich bin da aber unsicher. Neulich hatten wir hier einen Thread, wo jemand einen Kernel 2.x.y und einen 2.x.y-toshiba parallel betreiben wollte, und IIRC waren die Probleme, die ihn zum Mailen veranlassten, keine grundsätzlichen, sondern die LILO-Konfiguration stimmte nicht. das -toshiba ist teil der kernel-version (bzw revision) und das wird vom kernel mit unterschieden = das geht Peter BTW: im absender deiner mail steht keine email-adresse? -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: LVM per Netz?
Hi! Hallo, alle zusammen! Hab eine Frage, vielleicht hier etwas OT, aber im Internet nichts gefunden: Mehrere Platten mittels LVM zu einer großen zusammenzufassen ist ja noch kein Problem. Ich habe nur das Problem, dass in einen meiner Rechner nicht genügend Platten passen, um die geforderte Größe zu erreichen. Hat jemand eine Idee, wie man sowas lösen kann (habe so in Richtung von zwei Rechnern gedacht, die zusammen etwas wie ein LVM-Verbund bilden, aber nach außen hin als ein ganzen per NFS exportiert werden können). Oder hab ich irgendwas übersehen? Bin für jeden Tipp dankbar! Network Block Devices, per LVM (oder Raid) zusammenfassen ist aber für meine Begriffe verdammt Problematisch warum passen in deinen Rechner nicht genug Platten? Peter -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Secure Copy von stdin?
Hi! [EMAIL PROTECTED] (Kai Großjohann) writes: tar cvpf - /etc | ssh pc cat /tmp/schnuerpel.tar klappt das wirklich mit 'v'? anstatt pc - user@pc sonst geht's Peter -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Verzeichnisprobleme mit /home auf nfs-server
Hi! Hallo, die ~/ verzeichnisse meiner Rechner befinden sich auf meinem nfs-server. Authentication erfolgt derzeit per /etc/passwd, ... kein nis (yp)? Nun bekomme ich aber fehler vom portmapper und irgendwas mit dem rpc. Und beim Bootvorgang dauert es rund 5 Minuten bis es weitergeht. Es sind der Router, 11 Server und 7 Workstationen. Woran kann das liegen ??? ev. läuft einer von den rpc.* diensten nicht ... mein tip ist der rpc.statd Peter -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: pppstats und console...
Hi! Hallo, leztes Jahr habe ich gesehen, das es moeglich ist, ein Programm wie pppstats in einer VC ohne login zu starten, - genaugenommen, pppstats anstatt von login starten. vielleicht als pseudo-deamon? /etc/init.d/skeleton sollte hilfreich sein Peter -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: pppstats und console...
Hi! Hallo, leztes Jahr habe ich gesehen, das es moeglich ist, ein Programm wie pppstats in einer VC ohne login zu starten, - genaugenommen, pppstats anstatt von login starten. Siet vielen wochen bin ich nun am suchen der Loesung... /etc/login.defs, /etc/inittab, getty, login, ... 1:23:respawn:/sbin/rungetty tty1 -u root -- login -f username und dem user in seinem .bash_profile das programm oder 1:23:respawn:/home/user/programm das obere sollte funktionieren, hat natürlich den nachteil, das die shell offen ist das untere ist untested Peter -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Von ext2 auf ext3
Hi! Hallo, wie stelle ich mein Dateisystem ext2 auf ext3 um, bzw. besser gesagt, wie ergänze ich es um ext3 (debian woody). Ich weiss, dass ich es vor kurzem gelesen habe, aber ich finde es nicht mehr. tune2fs -j /dev/{h,s}dX Peter -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Passwort und User abgleichen
Hi! hi ... bin auf der suche nach einer effizienten und sicheren moeglichekeit zum abgleich von usern und passwoertern. Ich habe zur zeit mehrere linux rechner und bin es leid auf jedem einzelnen die user einzurichten. was wuerdet ihr mir empfehlen nis :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ gpg: 40c9053e ~ -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: DHCP an inteface binden (Zusatz)
Hi! 2. nmap sagt auch, dass der Port offen ist. Vielleicht einfach mal nach dem Aufruf von dhcpd in der rc-Datei gucken - da könnte es sein, daß bei *Aufruf* das Interface nicht als Kommonadozeilenparameter übergeben wird, wie's eigentlich müßte. Wird wirklich übergeben. Ich habe dhcpd auch mal per Hand gestartet mit /usr/sbin/dhcpd eth0. Er horcht trotzdem auf allen. workaround: konfiguriere den dhcpd für das eth1-netz als not authoritative, dann fühlt er sich wenigstens nicht mehr zuständig Gruss, Michael -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl) :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ gpg: 40c9053e ~ -- Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: LILO other=/dev/hda6 (boot logical partition)
Hi! On Tuesday 12 February 2002 04:28 pm, Michel Loos wrote: [snip] As far as I know Windows can only boot from a primary partition. Since you have more then 4 partitions some must be secondary partition: you won t be able to boot windows from them. I am not even sure that you can toggle the bootable flag on a secondary partition? this is true. any windows partition has to be within the first four partitions. not completely: windows NT and derivates (2000 XP) could resist on a extended partition - in a logical drive - but they need a primary for the ntloader (NTLDR) :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ gpg: 40c9053e ~
Re: IOMEGA ZIP-100 / ZIP-250 -- banging my head against the wall
Hi! FirstLast # Type Sector Sector Offset Length Filesystem Type (ID) Flags -- --- - -- - -- - 4 Primary0 196607 32 196608 FAT16 (06) Boot (80) [~]# I've never heard why they come with slice 4 as the active partition. that is/was because of compatiblity-reasons to mac's :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ gpg: 40c9053e ~
Re: DHCP client retrieving 2 IP's
Hi! On Fri, May 04, 2001 at 05:09:57AM -0700, Aaron Walker wrote: I recently installed Debian v2.2r3 and I installed the DHCP client as well.. when debian boots, DHCP assigns eth0 an IP (which it is supposed to do, in this case 192.168.1.4) then it also assigns the loopback (/dev/lo) an IP (192.168.1.5). If I look at my DHCP clients table on my DHCP server, it lists both IPs with the both of them having the same MAC address as well. Can anyone tell me why it's retrieving 2 IP's? Thanks for your help, What dhcp client are you using? dhcpcd? pump? Ah, I see dhcp-client in stable currently, so that's dhcpcd renamed I believe. Lets see your /etc/network/interfaces, and your /etc/dhcpc/config (assuming dhcp-client still uses that). you don't need a dhcp-client if you're using the ifupdown-package (at least i don't find any in my dhcp-using configuration) so - possibly that's the reason of the double dhcp assign :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: Toshiba Satellite 2535CDS laptop
Hi! I'm trying to install debian on a 2535cds and not having much luck... I've used the Windows BIOS management software (AFAICT, there's no keystroke that will invoke BIOS during the boot sequence) to change the boot device preveference to CDROM/FDD/HDD. you can use the keyboard buffer overrun-trick -- try to hold one key of the keyboard when you're powering on the laptop then there should come up the message keyboard error ... and you're in the BIOS try the F1 or the ESC-key first - i'm not sure which one works for me A potato CD in the drive appeared to be completely ignored, so I made a boot floppy, which emits the message SYSLINUX 1.48 1999-09-26 Boot failed and hangs. What should I try next? Or is this machine entirely linux-hostile and not worth the effort of messing with further? in times of potato there were special tecra boot-disks which solved some problems with toshiba laptops IIRC the second disk of a potato cd-set was also bootable with the tecra boot-disk :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: (OT) Storage (8*IDE HDs) any experiences? - diodes
Hi! at these extremes... the diodes wont helpand the dioes will simply burn up due to the current it has to pass to get to that voltage one side being a diode drop ( 0.7v ) across itself.. - a power mosfet is better suited ... hmm, mosfet doesn't make sense to me - IIRC they only work like switches I think you should use Shotkey-diods the largest one i know could pass 200 ampere - and they've less than ~0.4V voltage drop :wq - until next mail B-), l8r Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
raid0 or knfs -error
hello, everybody i'm using a 2.2.13ac3 kernel with hpt366 patches on an Abit BP6-board i have my raid0 (pub, 34GB) exported, sometimes when i access the raid via nfs (knfs 1.4.7 client) i get following message: Feb 27 22:29:00 mind kernel: find_fh_dentry: 08:03/116774 dir/116815 not found! can somebody tell by what this is caused? (i suppose it's the raid) -- and tell my how to clean this problem? until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: SMP
Hi! On Sat, 19 Feb 2000, Phil Brutsche wrote: pbruts Yes, I've heard (she posted here once). All the documentation I've seen pbruts for dual P5 boards, and all those that I've talked to, say that such a pbruts machine can't exist. pbruts pbruts I'd like to hear how it was done - maybe it'll work for dual K6-IIs :) pbruts it's also possible that she just has 2 cpus installed, but the second is not being used. everything i have read says its impossible as well. all i've read from her shows she is experienced (IIRC ISP ...) so she could see the diffrence between one or two CPUs ,-) until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: SMP
Hi! [1] Actually, some AMD processors do support SMP - the K6 (I think it was the K6) and the Athlon (most definitely - it uses the bus protocol of Compaq's Alpha, called EV6). However, there are no such systems that I've ever heard of; no one makes a motherboard that supports dual AMD processors, and there are no operating systems that support dual AMD processors. somebody on the debian-user-de-list said that she uses 2 K6 on a dual P5 board until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
raid-problems
hello after a reboot (caused by a power fail) my raid was checked with ckraid and brought back into sync, but e2fsck sais, that the md-device-partition has zero length?? the problem is, that my /usr /home and /var on the md-device resist any hints? -- until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
mailing-list archives
hello i´m searching for mailing-list-archives in _mbox_ format, because i´ve lost my archives since january (´99) -- until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
rsync over proxy/firewall
hello, i want to rsync my local mirror from the debian-ftp-mirror in our country (germany) at my work, but they trust on M$, so i have to deal with their M$-proxy 2.0 :-(, but i don´t know how to become through it. which setting can i do (i´ve got access to it) to enable rsync??? -- until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: apt-get proxy
Hi! On Thu, 03 Jun 1999, debian wrote: Also once I have downloaded/upgraded using dselect to apt-get how do I configure apt-get to use the MS-proxy on company lan, which doesn't require authentication It's in the documentation somewhere. # export ftp_proxy=ftp://your ftp address here:port/ ditto for http_proxy and how about rsync?? (with a proxy with auth) -- until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: XDM again
Hi! On 09-Mar-99 Christian Dysthe wrote: Hello Debian-user, I still have problems getting XDM to run. Starting X with startx works fine, but when I start XDM I get a minimal fvm desktop, not the setup I have in my .xinitrc file. I know I must be missing something obvious. Can anyone help? xdm reads ~/.xsession not .xinitrc. Simply copy your .xinitrc file over and all will be well. but don´t forget to make it eXecutable (chmod +x .xsession) until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: xserver fixated on tty7?
Hi! i probably missed something as i upgraded to slink today, but is the tty that the xserver uses somehow changed to be in some config file (rather than taking the first unused one)? maybe have a look at /etc/X11/xdm/Xserver there will be an parameter (for xdm) ... but the file is self-describing ;-) until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: Hard Drive Question....
Hi! Greetings, I know I've seen this addressed before, but for the life of me I can't seems to find it, so I will ask the group. I have several machine, now running DOS 6.2. The system BIOS doesn't support large drives, 540MB is the max. I have several 630-1000MB drives and wish to use them on these machines then boot the machines up with LINUX. What do I set the BIOS to in order to correctly partition the drives with Linux? Thanks in advance. linux uses the bios only for booting (lilo) - so you can use the whole harddrive-space leave the harddrive-entries as the are good for dos - linux doesn't need them you only have to store the _kernel_ unter the limitation of 540MB (504MB) so that lilo can access it over the bios here my suggestion about partitioning: 30-50 mbswap-drive under 500 mbpartition / (root) rest over border/usr if you'll partition this scheme, dselect will suggest you automagicaly to use the partition over 500mb as /usr until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: kernel 2.0.36 compile problems
Hi! I plan to go to kernel 2.2.1 pretty soon, but I noticed there was a patch file in .bz2 format which I assumed to be bzip but which doesn't decompress with bzip. use bzip2 instead -it´s available as .deb How do you make a .deb file for the kernel-source so I can install it and dselect will list it? Can anyone tell me what the problem is with 2.0.36 kernel? is the .config from an older kernel? then try make oldconfig - this will add the changes between old and newer .config until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: AMD K6-2 / Bogomips problem
Hi! On 19-Jan-99, Peter Bartosch took time to write : bogomips should only depend on hardware no ? only on cpu (and clock) that's what i thought too, but it doesn't seem true in my case as with exactly the same hardware and no change in bios i have 700 bogomips with kernel 2.2.0pre7 and 350bogomips with kernel 2.0.36 compiled either as 586 or as 686 they are all compiled with same options (as much as possible) i've read somewhere, that this lies on the size of the cpu's cache (1st level) this is IIRC in K6-chips twice as big as in pentiums, but if i think over it this couldn't be true/realistic until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: AMD K6-2 / Bogomips problem
Hi! i have : processor : 0 cpu : 586 model : AMD-K6(tm) 3D processor vendor_id : AuthenticAMD stepping: M difference !!! what is it ? it's a production-revision! higher stepping - newer cpu because of newer production-masks (and hopefully with less errors) i have two 64Mo chips 100MHz coming from different manufacturers (could that be the cause ?) will bogomips change if memory changes ? no it won't, bogomips depend only on your cpu (-registers) I have found in the past on a couple of occasions I have had ludicrously low bogomips figures and have re-compiled the kernel (not even changing the settings!) and the rate has gone up the next time i have re-booted. Only ever happened with a RedHat system - don't know why. isn't that strange ? don't worry about it, bogomips are bogus, they don't say anything since the bogomips are equal to your clock frequency (or to the double clock freq with some (all) K6) maybe them could be used as comparision-argument, but this was in pre P5 times bogomips should only depend on hardware no ? only on cpu (and clock) just my 0.02 euro until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: which pop3 daemon?
Hi! Any opinions on which of the few POP3 daemons are best/most secure? just a hint: qpopper - i haven´t tried it yet (but soon :-) until next mail B-) Peter -- :~~ [EMAIL PROTECTED] ~: : student of technical computer science : : university of applied sciences krefeld (germany) : ~~ FD314F21 C7 AE 2F 28 C1 33 71 77 0D 77 CD 6E 58 E9 06 6B
Re: LILO's now working(thanks!), BUT...
Hi! [EMAIL PROTECTED] wrote: No The jumpersettings are hardware-settings. Take the harddisk out. Look at it. Perhaps you can see some small things, that can be moved. And an explanation to it printed directly on the harddisk: Slave: one setting: Primary: another setting. Usually it's easy. Yes I know that but does this apply to SCSI drives too? I was told that it is the ID (only ?) which determines the boot in this case. in SCSI-cases true, it's the id which determines the boot-drive normally you could only boot from drives with id 0 or 1 (i know this correctly from DOS, but not from linux) IIRC this depends on the motherboard-bios which could only manage 2 boot-drives (i don't know if board's with EIDE-controllers can handle 4 boot-drives) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Debian and SuSE with Win98/FAT32 and NTFS
Hi! On Mon, 11 Jan, 1999 à 07:33:21PM +0100, Peter Bartosch wrote: Hi! On Sun, Jan 10, 1999 at 09:16:45PM +0300, Serge Gavrilov wrote: On Sun, Jan 10, 1999 at 10:09:26AM -0800, Pann McCuaig wrote: On Sun, Jan 10, 1999 at 11:00:14AM -0500, Danny R. Gray wrote: that FAT32 for Win95B support is in Kernel 2.034, is this true and is it Command (m for help): (If that partition were FAT16 fdisk would know its type.) no, you can change the partition id (e.g. with fdisk) whithout changing anything else -- and the kernel recognises it anyway For the kernel it won't make any difference but M$-DO$ and Win1895 rely on the correct type to boot. So, it Nintendo can boot from this partition, it's not a FAT16 one. yes you're right, in such cases win95 asks to format the unknown-type-disks - and not only once *g* until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Debian and SuSE with Win98/FAT32 and NTFS
Hi! On Sun, Jan 10, 1999 at 09:16:45PM +0300, Serge Gavrilov wrote: On Sun, Jan 10, 1999 at 10:09:26AM -0800, Pann McCuaig wrote: On Sun, Jan 10, 1999 at 11:00:14AM -0500, Danny R. Gray wrote: that FAT32 for Win95B support is in Kernel 2.034, is this true and is it Command (m for help): (If that partition were FAT16 fdisk would know its type.) no, you can change the partition id (e.g. with fdisk) whithout changing anything else -- and the kernel recognises it anyway the id is only for users ;-) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: RH vs Debian (Switch to Red Hat ?)
Hi! On Sun, Jan 10, 1999 at 01:58:11AM +0200, shaul wrote: I have found that there is much more packages available for debian than there are for Red Hat Isn't it odd ? Given that there are much more RH users then Debian users (3:1 ratio ?), how can it be ? Are there more programmers who use Debian then those who use RH ? Are all of this packages constantly maintained by both a Debian developer and an upstream one ? Probably has something to do with the open development architecture of Debian. 100+ debian developers outnumber the redhat 'core' developers. i think the reason is the advertisement of redhat, i´ve never heard about debian until a fellow student points out (thanks rainer :-) that there other dists than redhat, suse or dld (german). - And i´m very satisfied with Debian (i´m a hobbyist ;-) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: System won't boot, lilo.conf problem
Hi! Hi I have the same situation to Tam. Whenever I boot my PC, It only show LI and freeze. The different thing is I have only one disk ( 2GB) and all dedicated to linux. No other operating system inside. The /etc/lilo.conf content is boot=/dev/hda1 ^--- you have to write boot=/dev/hda here -- lilo should be written into the mba of the first drive not the first partition (which have no mba) root=/dev/hda1 install=/boot/boot.b map=/boot/map -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: XDM
Hi! On Fri, 8 Jan 1999, Frederic Breitwieser wrote: Greetings, My last question/issue/problem is I didn't answer yes to making XDM the default logon prompt, therefore one must sign onto the box in text mode, then type XDM then sign on again. The first signon must be root. Is there anyway of changing this as to make the box ALWAYS come up with XDM as the default logon ? I kinda like single sign on :) Go to /etc/X11/config and uncomment the last line that says #start-xdm This will automaticly start xdm on the login. Also, make sure that there is a symbolic link to execute xdm in /etc/rcX.d , where X is a runlevel number. (link should be present in all of them and look like this lrwxrwxrwx 1 root root 13 Nov 1 17:25 S99xdm - ../init.d/xdm) Andrew and don´t forget to comment the no-start-xdm line, if there´s any and no, this doesn´t affect telnetting to your box peter -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: linux window manager
Hi! Hi ! Which window manager is the best? I meen, which one has graphical configurations, which one users prefer (za one koji znaju hrvatski: koji je najzastupljeniji) and software is specialy created for, like KPPP, and such things? well, i´m using fvwm2 which is very configurable, but if you´ve used wintendo before you´ll prefer kde which would take the best of all worlds (win, unix, mac) or fvwm2-95 another adaption from wintendo sure, there are more wm´s - icewm, enlightment, blackbox, twm, mwm (motif), olwm (open look - sun like), to name a few oh, there are windowmaker and gnome too, which are used from many guys here at the list ;-) -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: Trying to install gide
Hi! Hi Debian users, I'm trying to install gide using apt-get and ocurrs an error: phantasy:/home/paulo# apt-get install gide Updating package status cache...done Checking system integrity...ok The following NEW packages will be installed: gide 0 packages upgraded, 1 newly installed, 0 to remove and 627 not upgraded. Sorry, but the following packages are broken - this means they have unmet dependencies: gide: Depends:libgtk1.1 phantasy:/home/paulo# But, when I try to install libgtk1.1: phantasy:/home/paulo# apt-get install libgtk1.1 Updating package status cache...done Checking system integrity...ok Sorry, libgtk1.1 is already the newest version 0 packages upgraded, 0 newly installed, 0 to remove and 627 not upgraded. phantasy:/home/paulo# What I have to do? I have a mix of Hamm, with some packages upgraded. Have a nice day,Paulo Henrique did you try apt-get -f install -- this will deinstall the deb´s with the unmet dependencies in most cases peter
Re: Xfree86 instalation problems
Hi! Pozdrav ! I have some problems during the configuration of Xfree86. I'm guessing that problem is in video card and monitor configuration. I have ATI 3D Xpression+PC2TV 4MB and ADI ProVista E44 15 monitor. I chooseright video card prom the card list and enter the right horizontal and vertical frequencies numbers and when I click on DONE then when he tries to do whatever he needs to, I wait for a minute or so, and all I get is black screen, then I do alt+f1 and it says something like 'unable to connect to x server' and then he tries one more time but with the same results. What should I do? I installed xserver-mach64, vga and svga xservers with dselect. /etc/X11/Xserver exist line with /usr/bin/X11/XF86_Mach64. What is debian distro? Could anyone send me a copy of his own XF86Config file if has the same or so card as I have? I tried to copy XF86Config file in /etc/, which I created a long time ago with MiniLinux and it worked there, but I just the configs for X11 are in /etc/X11/ - so it is for the XF86Config, too couldn't, like I haven't even write cp ... Yes, I'm logged as root. Where can I, if neccessery, downoad newer version of Xfree86, and how do I know which version do I have? dpkg -l packagename will show the version newer XFree-packages can be found at ftp.de.debian.org - i suppose you´ve hamm (debian 2.0) installed - so you´ll find a newer in /debian/dists/slink (frozen) but be careful some packages are possibly broken (because of frozen - pre release - stadium of slink (debian 2.1)) Thanx a lot ! P.S. another question. I had kernel version 1.3 and I succesfully upgrade it to 2.0.33, but as I am booting linux from floppy disk on which is old kernel, how do I create a new floppy disk with the new kernel? try mkboot - it creates a new boot-disk based on the actual kernel -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: Meaning of Failed Intel bug check?
Hi! However my SONY Vaio PCG-505F is SUPPOSED to have a Pentium-MMX running at 233MHz. (See http://www.sony So why is Debian 2.0 complaining? Is it because the chip is rated at 233MHz, but only running at 231? Or is this just a bug in Debian 2.0? i don´t think that´s a bug -- it´s just a matter of accuracy of the timer and/or of the measuring-loop - and last not least the accuracy of the clockchip and/or the quartz (if there´s any in you comp) my experience: once i´ve measured my old 486 with norton util´s, that said my 66Mhz comp works with 64Mhz, one minute later with 67Mhz, another minute later 63Mhz (there were some heat-problems *g*) -- so you can say if the deviation is only less than one or two percent your cpu works with the right frequency -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: where is xmem(hamm)?
Hi! Hello fellow Debian users! When I ran bo on my system I used to have a small util named xmem running, which showed memory utilization in X11. I upgraded to Debian 2.0 a few months ago and have not yet been able to relocate xmem. I grepped the contents-file for it but did not find it, I also searched the mailing lists archive at debian.org, but to no avail. I found someone asking where xmem had gone, but there was no answer. you´re not alone, i´ve asked for xmem some time ago, but nobody could help IIRC xmem was a contained in xcontrib someone said that xmem was a symlink to xload - but i couldn´t find such option for xload - so i´ve searched for some equivalent the only thing my requirements nearly fill was xosview, except the size (i´ve used xmem swallowed into an fvwm-panel) xosview´s graphical view disorts if the geometry decreases against zero -- mmm, it´s lacking a minimal restriction and the font doesn´t resize (i´ve only seen the xosview from hamm and slink) mabye some other guys know where it´s gone Any help appreciated. yes from me too ;) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: mount -r -t iso9660...-fs not supp by kernal (fwd)
Hi! PS should i CONFIG_MATH_EMULATION y/n PENTIUM 200 no mmx two chips on the board GA586 what do you mean with 2 chips? -- multi-processor-board?? then you should trie 2.1.-kernels which provide SMP-support if you could give me a doc that talks about these options in more detail kernel-HOWTO (to both iso9660 and smp) and if recommended parallel processing HOWTO for smp until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Installation Partition Problem
Hi! I am a newcomer to the Linux arena. I've been a MS [...] information on my HD after I run debian install, the HD is setup into 4 Non-MSDOS partitions, and they are all blown WAY out of proportion, like I have one, 151 MB partition on a 120 MB hard drive, and all the other partitions are huge. I have a feeling that's something that's causing fdisk's error message. Any help would be appreciated. try to remove all partitions with M$-fdisk, it´s never an failure to create/remove partitions with the OS which should/has worked on it and try to autodetect your harddrive if in the laptop´s bios there´s such option (well, i don´t know your hardware at all) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Networking on/off-line.
Hi! Greetings all, Here's the scenario five machines, 1 - dedicated debian box 2 - dual boot (one laptop w/debianwin95, 1 box w/debianwin98) 1 - win nt 4 workstation box 1 - win 98 box this is the desired mode of operation: i would like to setup an intranet of sorts. I've gone through most of the networking mini-HOWTOs...ip-masq, intranet, etc. but i'm a bit confused. i would like to connect all of the machines together (already done) with samba but i would also like to setup an internet connection via a modem on a debian box with ip masq but the ip that this box obtains is dynamic from my dialup. This is where my confusion ariseshow do i need to setup the other non-deb boxes so that they may surf the net also? DHCP? use static ip´s (maybe a class-c-network -- 192.168.xxx.xx), dhcp is a method for dynamical assigning of ip´s, which in my opinion isn´t necessary for only five boxes you have to install the tcp/ip-components at each wintendo box -- then you can assign a static ip´s - but be sure each ip is uniqe ;) install a proxy (maybe squid) or use transparent proxying (IIRC only 2.1-kernel´s) -- then you only have to config your other machines (e.g. netscape) to use the debian-box as proxy-server the dynamic isp-ip isn´t a real problem, the masquerading is able to let only the packages destined for the outside through to your isp. IIRC there are several ways to transmit internal packages to the outside (called routing) -- and i don´t know each On the other hand , when off-line hand i would also like to be able to let users on the non-deb boxes to telnet to the deb boxes when off-line. (Can you tell i'm new to this networking thingy? ;)) Is this possible? if so just point me in the right direction!!! that´s no problem, if they are connected (via lan) you only have to edit their hosts and networks -- both are in the windows-directory (i´m not sure if this is correct for nt but for 95/98) just my 2 cents, pleas correct me if i'm wrong ;-) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: upgrade to slink
Hi! Alexander Kushnirenko wrote: deb http://ftp1.us.debian.org/debian slink main contrib non-free deb http://non-us.debian.org/debian-non-US stable non-US there it is you have to add a / at the end of the url just my 2KB ;-) -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: Two Questions
Hi! On Sun, Dec 20, 1998 at 10:28:12PM +, David A. Lee wrote: Does Debian 2.0 come with Netscape on the CD's, or do I have to download it? Netscape is not part of Debian, therefore it can't be on the official CD. Some vendors do include it on the Debian CD's they are selling, though. netscape 4.5 (navigator communicator) are gonna be a part of debian 2.1 (called slink) When do you expect Debian 2.1 to be released officially? And Debian 2.2? When it is ready (2x). There really is no better answer. An equivalent formulation is: When all release critical bugs are fixed and the official CD images are produced and tested. Marcus until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Learning about/modifying drivers
Hi! In article [EMAIL PROTECTED], Eric House [EMAIL PROTECTED] wrote: I need a crash course on Linux drivers. I'm frustrated with the fact that the driver for SCSI CD-ROMs doesn't allow direct access to audio tracks. Well, it does. I've created my own audio CDs under Linux. You just need the right software. seems, that he wants to mount an audio-cd, witch couldn´t be done ;-) - should look for cdda or cdparanoia Since my hardware supports ripping running NT I'd like to modify the necessary Linux driver to allow the same thing on Debian -- or at least to understand why it can't be done. rippin could be done with cdda2wav (i do so) or create an image with dd or ... Why do you think it cannot be done? Try the xcdroast package. until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
limit of mutt
hello debians! i ran into trouble with mutt - where is the maillimit? my situation: i rewrote my procmailrc, then i refilter my collected mail (mostly from debian ;-) with it -- that works great but than, i´ve wanted to view into my debian-devel-mbox mutt ran and ran -showing sorting mail (the swap-space decreased so i´ve added a swapfile) - after waiting about three hours i killed mutt (the processor ran idle) then i´ve tried it with another comp over nfs -- this time it worked without prob´s the mbox was about 90megs big the first comp. had 16mb ram, 32mb swap and 80 mb swapfile the second (nfs), had 64mb ram 64mb swap - no swapfile i know the first is underpowert, but the time in this case doesn´t matter (i´ve wanted to split the mbox) and i´m confident that such will work ;-) in meantime i´ve done all work with the second-option here´s my question: had this been a problem of mutt or only of resources?? hope, i´m not too pushing, it´ just for info pleas excuse my bad english until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Package install problem
Hi! [...] }- why aren't you doing this ? }- it's simpler ! }- }- Because... the Win95 machine is a laptop and consequently I would have }- to tear that machine apart to get at the CDROM. }- }- There is method to this madness... I am not a newbie to computers of }- even to Unix just a newbie to the way Debian works. maybe you could post more details about the laptop - many debian-users use their favourite OS on different laptops/notebooks me for example: i´m running debian on a toshiba 210cs - and it works great ;-) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Console
Hi! }- man setfont }- }- }- On Tue, 15 Dec 1998, Shao Zhang wrote: }- }- Hi all, }-Is it possible to change the font size in the consoles(tty1, 2, 3, }- 4, 5,)?? }- }-Thx. if you are in an xterm use ctrl-right mouse button this will pupup a menu where you can choos some (standart) font-sizes -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: XFree and the dead keys
Hi! }- Hello }- }- don't know if this has been asked before: }- }- How do I set up my XF86Config-File in way that the german keyboard }- produces a plus asterisk asciitilde instead of plus asterisk }- deadtilde ? }- }- The following does not work: }- }- Section Keyboard }- ProtocolStandard }- XkbRulesxfree86 }- XkbModelpc102 }- XkbLayout de }- EndSection }- }- Setting XkbLayout to de(nodeadkeys) doesn't change anything. you´re a bit wrong: XkbLayout de XkbVariant nodeadkeys works for me until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: apt-get
Hi! }- Hi there, }- I just mail to share my expirience during updating. }- usualy using lynx and than download install from }- ftp.de.debian.org and always forgotten something }- on whats depend the package i tried to install }- i just tried apt-get }- wow :) }- for example: }- apt-get update g++ ; apt--get install g++ }- will install g++ and all other packages }- g++ depends on. }- really great, checking system-integrity also not system-integrity, IIRC only dpkg-database-integrity }- . }- I often seen dependency problems on this list }- maybe, if apt-get is more accepted upgrading }- installing will not must be a nightmare ;) certainly, and apt-get is quicker than dselect ;-) but if you only downloaded new packages (option -d) you'll get them all in one directory (maybe an wish-bug to the developers to sort them into categories, at least for local?, im certain such a wish is already reported, isn't it?) }- }- Wish You all the best }- }- -- }-Peter until next mail ;) Peter, but an other ;- -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: ftping StarOffice in small doses
Hi! }- Hi all, }- I want to download StarOffice but with it being 70Mb I don't fancy having an }- open line for seven hours plus. Does anyone know of an ftp program that can download }- in chunks at a time and doesn't mind frequent interruptions. I think in the past someone }- mentioned 'cftp' but I can't find any information on that. }- Does anyone know if StarOffice 5 is libc5 or libc6. Libc6 would be better from }- my point of view, if it's not can anyone recommend an alternative. }- }- Thanks use ncftp it has the -C switch for continous getting SO5 is libc6 -- it ships it's own libc-version with, but don't use it -- download the newest version of libc from unstable (slink) btw: you don't need to upgrade completely! until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: WINE
Hi! }- Hey all, }- }- When I try to run whine, it says: }- Could not stat /dos, ignoring drive C: }- Invalid path 'c:\windows' for windows directory }- }- Uh, help. you have to edit your /etc/wine.conf in it there are the dos-drives defined /dos is predefined as c: so, if you don´t have a mounted msdos-partition at /dos (and if your windir is´ns \windows) the invalid path error appears until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: About X
Hi! }- On Sun, 6 Dec 1998 [EMAIL PROTECTED] wrote: }- }- Well I got X too work but how do I load a different window manager? }- }- Download window manager you want , install it, and }- edit /etc/windows-manager so that at the start up of X it will run what its /etc/X11/window-managers, isn´t it?? }- you want. }- HTH, }- Andrew -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: backpack CD on Toshiba laptop
Hi! }- Anyone willing to educate me on how to mount a parallel port CD in }- Linux? }- }- All the HOWTO's, FAQ-O-MATIC's and FAQ pages for both Debian and Linux }- that I can find say things like after mounting an external CD device }- through the parallel port... without ever actually telling me HOW to }- mount the doggone thing. }- }- Since this particular laptop doesn't have a built in CD and the only }- PCMCIA NIC I currently have is a Xircom and thus not supported by the }- installation drivers. The CD is so that I can get access to the }- LinuxPress distribution CD and install the aditional PCMCIA support sot }- hat _then_ I can go online and get everything else installed. hmmm, i´ve never used a parallelport-cdrom but i think this should work like a par-port-zip with the possible exception of an ide-cdrom (the zip works like an scsi) i don´t know if there´s par-port-ide support in 2.0-kernels but in 2.1 (IIRC) - maybe in 2.0.36, too until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Canon BJC 4100 printer without color :(
Hi! }- Hi Debian users, }- I have a problem. }- I installed lpr and magicfilter from hamm and can't print in }- colors with }- my printer: Canon BJC-4100. I tried the bjc-600 filter. }- Is there anyone with this printer? }- Have a nice day,Paulo Henrique i´ve got the same problem with my bjc-620, and posted some time ago, but no response from the list btw: i know that my printer has used colors when i´ve printed from wintendo to my linux server with raw-data please send a mail, if you solve the problem, i´ll do so, too! until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: Cannon BJC-4100 printer
Hi! }- On mar, 08 dic 1998 10:55:11 Paulo Henrique Baptista de Oliveira wrote: }- Hi Debian users, }- I have a problem. }- I installed lpr and magicfilter from hamm and can't print in }- colors with }- my printer: Canon BJC-4100. I tried the bjc-600 filter. }- Is there anyone with this printer? }- Have a nice day,Paulo Henrique }- }- }- Hi i have the same printer and it works ok... i think you have to install gs to print with colors... no, gs (i´m using 3.33-7 it is suggested by magicfilter) won´t do it with my bjc-620 (with bjc-600-filter) -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
probs: color printing with canon bjc620
hello debians i configured my printcap to print with my canon bjc620 using the bjc600 filter it works fine -- but only black and white (i´ve tested with SO5, Netscape, xv) i remember some time ago it works! (this was on my server which is momentaly down) i´m using ii magicfilter 1.2-21 automatic printer filter. ii lpr 5.9-27 BSD lpr/lpd line printer spooling system is there anyone who prints color with this machine?? or: is there a better (special filter) for the bjc-620?? any hint is welcome until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: recommendations for an X news client?
Hi! }- I'm looking for something better than knews and netscape's news client -- }- any suggestions? slrn? if you've used mutt slrn won't be a problem ;-) until next mail ;) Peter -- :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
Re: diald time restriction
Hi! }- Peter Bartosch [EMAIL PROTECTED] writes: }- }- hi debians }- i´ve got only a short question: }- is it possible to restrict diald only to work at e.g. one hour per day? }- You can restrict certain portions of the config file to be operative [...] }- down unless specifically requested at other times) or do you mean that´s the job of diald, isn´t it? }- completely give up managing the link (both in terms of bringing it up }- and taking it down on inactivity) during certain times of the day? }- Either situation could be done with a config file change, though in }- the second situation it's better to use a cron job. }- }- i don´t use diald at the moment! it´s only to avoid reading more and more ,-) my problem: i had a big telephone-bill because my fetchmail/procmail had problems to fetch my mail. i want to limit my provider link to one hour per day, so your second possibility will do the right thing ps: i´m sorry about my late reply, but i´m a few days behind with reading debian-user -- until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: Installing Debian 2.0 on a Toshiba Satellite Pro 440 CDT
Hi! }- Dont Panic !!! }- }- There is nothing wrong with your laptop, except that it has the same feature as all }- the other toshiba laptops (and a few other brands). }- }- The Toshiba laptops require special rescue and drivers and these are located in the }- tecra folder in the boot disk directory. what are the differences? i´ve installed ma toshiba 210cs without any special (tecra-) disks my way was installing a temporary dos-platform and then installing from directly from the cd-rom (first time it was bo, but about 2 month back i installed hamm completely new ;-) until next mail ;) Peter :~~~ [EMAIL PROTECTED] ~~: : student of technical computer science: : university of applied sciences krefeld (germany) :
diald time restriction
hi debians i´ve got only a short question: is it possible to restrict diald only to work at e.g. one hour per day? and how? (config file, cron-job, etc.) i don´t use diald at the moment! it´s only to avoid reading more and more ,-) until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
Re: Can I start X while other stuff going on?
Hi! }- Hello Kent West [EMAIL PROTECTED], }- }- Can I switch to another virtual terminal and start X Windows while I've [..] }- dselect session, etc? }- Yes. }- And if I can, once I'm in X, how do I then get back to where I can see how [..] }- original vterm, }- Yes and yes. }- One nice thing you might like to do is set the environment variable [...] }- or can I bring up the process in an Xterm or something similar? }- No. Except, hmm, I don't know how you would do that. You might be }- able to take the /dev/ttyXX from the vt and put it in an xterm. }- But in general, no. The program runs where it's started. If it's an }- X program, it looks at the DISPLAY variable and shows up there. he wants to start a programm in a vt and move to the background - start x - and then raise it from the back into the front (of an xterm) - this procedure can be done with screen i think, with it it´s possible if i remember the description of a friend correctly ?? - i´ve just tried it for five minutes ;-) until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/
libc and staroffice 5
hello debians! after upgrading libc on my hamm-box to slink´s 2.0.7u-4 my apt won´t install anything further! i´ve installed the new libc´s for staroffice 5. would installing slink´s apt (0.1.7 iirc) fix such problems? using dpkg -i directly doesn´t give any error-message here´s the apt-error: Updating package status cache...done Checking system integrity...dependency error You might want to run apt-get -f install' to correct these. Sorry, but the following packages are broken - this means they have unmet dependencies: apt: Depends:libc6 but libc is installed: ii libc6 2.0.7u-4 The GNU C library version 2 (run-time files) ii libc6-dev 2.0.7u-4 The GNU C library version 2 (development fil ps: upgrade my box to slink isn´t possible in the moment until next mail ;) . ___ ---___ .--. ./ - /\ ___ ( DEBIAN `-|O O | | |; --.|| |___|: GNU/Linux _- |_) \. | __ eter| -/ | || | `. www.debian.org / ' .\. ||__| ` --- . ___ .. ' | ..| | | artosch | ...\. |___| / . ..| /,\ .__\ ~ [EMAIL PROTECTED] | | o| | | |O(| / student of technical computer science \.. \\ / university of applied sciences krefeld (germany) \__/ \_/