Re: [Elecraft] KX3 Charging question
Hi Gerry, The charger is a constant current source (which adapts its voltage to supply a constant current) and my guess would be that, at the end of the charging process, the difference between the voltages of power supply and batteries is not high enough for the charger to supply its current. Either the power supply voltage is not high enough or there is an additional voltage drop (higher than normal battery internal resistance or higher contact resistance in the battery holder perhaps?) Greetings Ralf, DL6OAP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
Unless I am misunderstanding the question, you cannot. Not with a SignaLink. The SignaLink is a mono input sound card (unless you re-wire the plug to listen to the SubRX). If you listen with headphones with the sub-receiver on, you will notice that the subRX appears in the right ear while the mainRX appears in the left. You can do the same thing (and I have) with a sound card that has a stereo input. To my knowledge, there are three sound card interfaces *designed* for amateur radio: 1. Timewave Navigator (formerly by US Interface) 2. MixW RigExpert 3. MicroHam (various models) At one time or another, I have looked at all three and debated which to get. After much agonizing and gnashing of teeth, I decided to stick with what I have for a few reasons: 1. I already had it (no money out-of-pocket) 2. The offerings only give me one thing I don't currently have (front-panel Tx audio adjustment) 3. I didn't need rig control which all of the three have - it would be wasted on me 4. They're relatively expensive ($250 - 300) even without the *necessary* cable which costs ~ $50 (you *can* build this cable yourself) I use an off-the-shelf external USB sound card. It is a Creative Labs E-MU 0204 which I do not think is currently in production. You can look it up to be certain. The previous model (0202) is also a good sound card if you can find it. There are scads of internal sound cards available. The beauty of the K3 is you do not need the audio isolation transformers available in the SignaLink (or other sound card interface designed for amateur radio); they're already built in. This is not directed at you, but it is a preemptive statement to those who will say you do not *need* the SignaLink: I apologize in advance for shouting, YOU NEED A SOUND CARD THAT IS DEDICATED TO AMATEUR RADIO AND *SEPARATE* FROM YOUR MAIN SOUND. Just yesterday, on 20 m JT65, I heard someone's WinXP shutdown sound over the air. You spent a couple of thousand on the K3, please be kind enough to the rest of us to spend another $100 or so and get a nice sound card. Yes, you'll hear all day that the K3 has the ability to take audio directly from the sound card. It is a wonderful feature. I use it. I use it with an amateur radio-dedicated sound card only. I wound up with the E-MU 0204 because I had experimented with kit-built SDR a few years back (I built a SoftRock TXRX Ensemble II and a Genesis G59/GPA10). The 0202 was already out of production, but the 0204 was available. I bought it used for about $120. They're less expensive even now. You do not have to go with my recommendation though. There are lots of choices. Again, I hope I didn't misunderstand the question and just flooded you with un-needed information. 73, Joel - W4JBB On 5/13/14, 10:41 PM, Bob KD7YZ wrote: I am using the BNC connector for the Rx antenna and am receiving primarily on the internal 6m band. This is the first time I have tried it. Otherwise I have been working many bands and using JT65 with no problems I just now realised that my SignaLink soundcard in fact is NOT listening to the Sub-Rx because I shut off the mast mounted Gaasfet and although the sub-RX audio dropped way off, the JT65 program showed a steady, unchanging noise level. So how do I tell the K3 to put the audio from the Sub Rx and not the main Rx? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
On 5/14/2014 06:09, Joel Black wrote: Unless I am misunderstanding the question, you cannot. Not with a SignaLink. The SignaLink is a mono input sound card (unless you re-wire the plug to listen to the SubRX). I do have an EMU-0404 though. I haven't used it in two years and it's in a drawer. How would this help me? Are you saying it can split the Sub-Rx audio out of the the two? ..Currently we take the SignaLink audio out the rear line in Line out places. I do realize the Sub-Rx audio is split when listening thru the headsets. I am using the Sub-Rx because I see no other way to use a separate receive line when I am using the internal 6m band. I have an Elecraft 6m XV50 but am needing to split the Rx input on it and haven't gotten around to it. It is wired to be able to take in Rx coax and have the Tx o the other conn. ... O want Split lines to simplify using high-end preamp w/o the usual possibility to kill said pre-amp if I screw up timing. I am not going to debate the use of this method as I used it extensively in the past in the 70's to 90's . So, the gal is to find the near term solution for using internal audio form the Sub-Rx. I will re-install the EMU0404 and see how to get the audio out. thanks for the idea. -- Bob KD7YZ AMSAT LM 0901 http://www.qrz.com/db/KD7YZ www.denstarfarm.us/LGD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - newest release of HRD
I am running 6.1 and it looks to me like the K3 is well supported, I have found no deficiency with HRD where the K3 is concerned. I typically do not use a lot of features on the radio panel, mostly working with the logbook and DM-780 for RTTY and the digital modes. 73s Jim, W4ATK On 5/13/2014 7:31 PM, Bill W2BLC wrote: Anyone using the latest version of HRD - 6.2? Their advertising says there in K3 and Kx3 support. Can anyone tell me what they have improved? I am still running an old 5.xx version that only partially support the K3. When/if HRD fully supports thatK3 I will immediately purchase an up-to-date version of HRD. I only use HRD for rig control, so all the other stuff is just fluff to me. The older versions, and I am told the more recent versions also, do not fully support the K3's controls or indications of control selections. Any comments? Thanks, Bill K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jim.w4...@gmail.com . __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLink from Sub-Rx on my K3
Bob, In regards to RX audio only: if the 0404 has a *stereo* input, it will listen to the MainRX on the left channel and the SubRX on the right channel when the SubRX is activated. *If* what you're looking for is being able to receive the audio from the SubRX, you will have to have a stereo sound card. If the 0404 does that, you should be good. If you're talking about anything else regarding the XV50, I'm not sure I understand that part as I don't use one. 73, Joel - W4JBB On 5/14/14, 7:06 AM, Bob KD7YZ wrote: On 5/14/2014 06:09, Joel Black wrote: Unless I am misunderstanding the question, you cannot. Not with a SignaLink. The SignaLink is a mono input sound card (unless you re-wire the plug to listen to the SubRX). I do have an EMU-0404 though. I haven't used it in two years and it's in a drawer. How would this help me? Are you saying it can split the Sub-Rx audio out of the the two? ..Currently we take the SignaLink audio out the rear line in Line out places. I do realize the Sub-Rx audio is split when listening thru the headsets. I am using the Sub-Rx because I see no other way to use a separate receive line when I am using the internal 6m band. I have an Elecraft 6m XV50 but am needing to split the Rx input on it and haven't gotten around to it. It is wired to be able to take in Rx coax and have the Tx o the other conn. ... O want Split lines to simplify using high-end preamp w/o the usual possibility to kill said pre-amp if I screw up timing. I am not going to debate the use of this method as I used it extensively in the past in the 70's to 90's . So, the gal is to find the near term solution for using internal audio form the Sub-Rx. I will re-install the EMU0404 and see how to get the audio out. thanks for the idea. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB: KPA500
If anyone is considering selling/upgrading their KPA500 please contact me offline. call (at) arrl (dot) net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
Sub rec audio is on right channel of all K3 audio outputs ( ring +sleeve). Make an adapter for SLUSB! Sent from my iPhone ...nr4c. bill On May 14, 2014, at 8:06 AM, Bob KD7YZ kd...@denstarfarm.us wrote: On 5/14/2014 06:09, Joel Black wrote: Unless I am misunderstanding the question, you cannot. Not with a SignaLink. The SignaLink is a mono input sound card (unless you re-wire the plug to listen to the SubRX). I do have an EMU-0404 though. I haven't used it in two years and it's in a drawer. How would this help me? Are you saying it can split the Sub-Rx audio out of the the two? ..Currently we take the SignaLink audio out the rear line in Line out places. I do realize the Sub-Rx audio is split when listening thru the headsets. I am using the Sub-Rx because I see no other way to use a separate receive line when I am using the internal 6m band. I have an Elecraft 6m XV50 but am needing to split the Rx input on it and haven't gotten around to it. It is wired to be able to take in Rx coax and have the Tx o the other conn. ... O want Split lines to simplify using high-end preamp w/o the usual possibility to kill said pre-amp if I screw up timing. I am not going to debate the use of this method as I used it extensively in the past in the 70's to 90's . So, the gal is to find the near term solution for using internal audio form the Sub-Rx. I will re-install the EMU0404 and see how to get the audio out. thanks for the idea. -- Bob KD7YZ AMSAT LM 0901 http://www.qrz.com/db/KD7YZ www.denstarfarm.us/LGD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Dayton hotels/motels K2/10 EC2kat-kpa
still go to the FDIM QRP thing at fairborne, but stay at the Dayton University dorms.. very nice.. and it costs 4 guys 104$ each for 4 nights wed- sat ( $ 26 a night) cu at Dayton I'll be out at #4041 with a K2/10 batt, tuner,ssb,nb,160, serial EC2 with 100watt top kat100 bottom , cables $1350 with each in heavy duty pelican cases.. reason selling kx3 amp tuner Herc II with TT PS ...12VDC solid state 500watt amp 1400 ( maybe even the remote control ...if I find it !) got a kpa500 ! bill ny9h/3 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
isn't this configurable using the CONFIG L -- MIX-- Rsettings? On 5/14/2014 8:23 AM, Nr4c wrote: Sub rec audio is on right channel of all K3 audio outputs ( ring +sleeve). Make an adapter for SLUSB! Sent from my iPhone ...nr4c. bill -- GB 73 K5OAI Sam Morgan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
Not on the Line Out unless one sets Line Out= Phones and then the AF gain controls the line out level. 73, ... Joe, W4TV On 5/14/2014 9:55 AM, Sam Morgan wrote: isn't this configurable using the CONFIG L -- MIX-- Rsettings? On 5/14/2014 8:23 AM, Nr4c wrote: Sub rec audio is on right channel of all K3 audio outputs ( ring +sleeve). Make an adapter for SLUSB! Sent from my iPhone ...nr4c. bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLink from Sub-Rx on my K3
Well gee ... when I ordered the K3, I got it loaded because I correctly figured that eventually (A) I'd need some other non-usual aspect for my weak signal stuff. And (B) that I would eventually figure out how to read thee manual and also understand (eventually) what I just read. That said, I might have just discovered what the installed KXV3 module could be used for. I just plugged the Rx Down-Line into the KXV3 BNC Rx Ant In. I am now hearing signals from the antenna by selecting K3 front-panel RX ANT . I see the waterfall of the JT65 program react to my switching off the mast-mounted LNA. If that's the case, then the SignaLink is also seeing the signal. I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. I guess Stereo wasn't needed. I wanted the high sampling rate of the 0404, at the time then. -- Bob KD7YZ AMSAT LM 0901 http://www.qrz.com/db/KD7YZ www.denstarfarm.us/LGD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K1
Hi , I am looking for a K1, Four Bands , with ATU preferably with internal battery options. If you have one available, please reply with your offer . If you are from Europe is most easy due the customs . Thanking in advance Marq ct1bww -- View this message in context: http://elecraft.365791.n2.nabble.com/K1-tp7589090.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLink from Sub-Rx on my K3
I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. No, unless you forget to select the TX antenna when you're not using the LNA feed. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. The EMU0404 has four inputs and four outputs - they can be configured as four mono in/four mono out or two stereo in/two stereo out. In either case you can connect input one to the tip of Line Out and input two to the ring of Line Out and receive both channels at the same time with the proper software (or configure WSJT to use input two for the Sub RX). 73, ... Joe, W4TV On 5/14/2014 10:05 AM, Bob KD7YZ wrote: Well gee ... when I ordered the K3, I got it loaded because I correctly figured that eventually (A) I'd need some other non-usual aspect for my weak signal stuff. And (B) that I would eventually figure out how to read thee manual and also understand (eventually) what I just read. That said, I might have just discovered what the installed KXV3 module could be used for. I just plugged the Rx Down-Line into the KXV3 BNC Rx Ant In. I am now hearing signals from the antenna by selecting K3 front-panel RX ANT . I see the waterfall of the JT65 program react to my switching off the mast-mounted LNA. If that's the case, then the SignaLink is also seeing the signal. I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. I guess Stereo wasn't needed. I wanted the high sampling rate of the 0404, at the time then. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3: PSK31 will not allow Split operation
There's nothing to correct, split works fine on Data A. Worked W1AW/0 on PSK63, split on the first call the other day. My first PSK63 QSO... I liked it, very snappy compared to the watching paint dry PSK31. You do need to insure that the B vfo is on the same mode as the A. Double tap A-B to insure this. Wes N7WS On 5/13/2014 10:51 PM, Richard Solomon wrote: Most, if not all radios I have seen, going split is NOT mode dependent. This should be corrected ASAP. 73, Dick, W1KSZ On 5/13/2014 7:40 PM, Scott via Elecraft wrote: You can run split if you use a program like fldigi. I worked WIAW/0 this afternoon this way. I believe any program with a waterfall can run split--that is not the same as direct readout on the screen, but it is better than nothing. 73, Scott. AA0AA PSK31 SPLIT: Folks, It seems the solution is there is no solution. PSK31 SPLIT appears unsupported in the K3 and the KX3. The argument seems to be PSK31 is never used in SPLIT operation. But W1AW/* uses Split for pileups. And many DXpeditions have used it (T32C for instance). While I rarely use any digital mode other than CW, I thought it was nifty to have RTTY and PSK31 as part of the K3. Turns out it is near nifty. :) Ah, but maybe SPLIT for PSK31 is on on the list of things to come later? or have I missed something? ?Bob W1XT, Sun City West, Arizona __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] XV50 for trade
I have a clean working XV50 no problems that I would like to trade for an XV432. Anyone interested? 73, Mike K0AZ k...@centurytel.net 'IN GOD WE TRUST' KØAZMike Sanders EM37cd www.k0az.com SouthWest Missouri __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3: PSK31 will not allow Split operation
split works fine for DATA A, AFSK A, and FSK D but it does *NOT* for PSK D the question is... why was this one digital mode not allowed to operate split? -- GB 73 K5OAI Sam Morgan On 5/14/2014 11:15 AM, Wes (N7WS) wrote: There's nothing to correct, split works fine on Data A. Worked W1AW/0 on PSK63, split on the first call the other day. My first PSK63 QSO... I liked it, very snappy compared to the watching paint dry PSK31. You do need to insure that the B vfo is on the same mode as the A. Double tap A-B to insure this. Wes N7WS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
Well, they do say opinions are like... Shout all you want, but it is not imperative that you have a separate sound card. The computer's integrated sound card can be dedicated to ham radio. Keeping Windows sounds from playing through the radio is no different from not transmitting outside the band. It's something that is supposed to be in our skill set. I have both a SignaLink and a Tascam US-100 (highly recommended by Jim Brown). On RTTY, neither of these is either better, or worse, than the built-in card in my laptop, and both require a USB port, something in short supply. It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. Wes N7WS On 5/14/2014 3:09 AM, Joel Black wrote: [snip] This is not directed at you, but it is a preemptive statement to those who will say you do not *need* the SignaLink: I apologize in advance for shouting, YOU NEED A SOUND CARD THAT IS DEDICATED TO AMATEUR RADIO AND *SEPARATE* FROM YOUR MAIN SOUND. Just yesterday, on 20 m JT65, I heard someone's WinXP shutdown sound over the air. You spent a couple of thousand on the K3, please be kind enough to the rest of us to spend another $100 or so and get a nice sound card. Yes, you'll hear all day that the K3 has the ability to take audio directly from the sound card. It is a wonderful feature. I use it. I use it with an amateur radio-dedicated sound card only. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3: PSK31 will not allow Split operation
I stand corrected. You are correct. Why, I don't know. Personally, I would never try to operate these internal digi modes. I can't send decent CW with the built-in keyer, I shudder to think what my digital signals would be :-) Wes N7WS On 5/14/2014 9:34 AM, Sam Morgan wrote: split works fine for DATA A, AFSK A, and FSK D but it does *NOT* for PSK D the question is... why was this one digital mode not allowed to operate split? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KAT500 Tuning Issue with V1.67
Since updating to 1.67 my KAT500 tuner is behaving strangely. It won't tune my 40 meter dipole on auto and when the KAT500 is placed in bypass the K3 autotuner tunes the same antenna perfectly. I have tried different coax, but the K3 autotuner at 25 watts output tunes the antenna nicely while the KAT500 does not. Both the KAT500 and the W2 wattmeter go nuts when I try and tune the 40 meter dipole through the KAT500. In KAT500 bypass the meters on the KAT500 and W2 continue to show very high SWR but the K3 autotuner works fine and presents a perfect SWR to the K3. The KAT500 has no problem with the higher bands. My KX3 tunes this same 40 meter dipole through the KXPA100 with no problem. It must be something in the KAT500. Anyone else having this problem? Is this a problem with V1.67? Thanks Ron KM4VX -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-Tuning-Issue-with-V1-67-tp7589101.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3: PSK31 will not allow Split operation
This one digital mode is used *only* for PSK from paddles. If one needs to do split PSK31 use DATA A with the computer and either split audio tones from the computer PSK31 program (DM-780, MixW, WinWarbler, DigiPan, etc.) or split VFOs like any other mode. With PSK D one can not monitor the transmit frequency to make sure it is clear if split. 73, ... Joe, W4TV On 5/14/2014 12:34 PM, Sam Morgan wrote: split works fine for DATA A, AFSK A, and FSK D but it does *NOT* for PSK D the question is... why was this one digital mode not allowed to operate split? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3: PSK31 will not allow Split operation
On Wed, May 14, 2014 at 11:32 AM, Joe Subich, W4TV li...@subich.com wrote: This one digital mode is used *only* for PSK from paddles. What about PSK via the P3/SVGA? I thought it uses PSK-D. Frank KG6EYC -- CW: NAQCC #6554 | SKCC #10435 | FISTS #16155 | SOC #1038 | FPQRP #3186 Digital: FHC #4224 | 30MDG #6370 | DMC #5698 Gear: K3 #7164 | P3 #3134 | KX3 #1787 http://vadept.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. That's unfair and untrue ... there is a distinct disadvantage to building every option under the sun into a transceiver. The biggest is that all users pay more for the transceiver *and* the built-in options (compare the panadapter in an FT-1200 to the P3 or SDR-IQ) are far inferior to the best of breed that can often be had for little more than the amortized cost of the built-in feature. If one took your prescription, the K3 would only be available in one configuration - with all options built-in at double the price of the base unit. 73, ... Joe, W4TV On 5/14/2014 12:42 PM, Wes (N7WS) wrote: Well, they do say opinions are like... Shout all you want, but it is not imperative that you have a separate sound card. The computer's integrated sound card can be dedicated to ham radio. Keeping Windows sounds from playing through the radio is no different from not transmitting outside the band. It's something that is supposed to be in our skill set. I have both a SignaLink and a Tascam US-100 (highly recommended by Jim Brown). On RTTY, neither of these is either better, or worse, than the built-in card in my laptop, and both require a USB port, something in short supply. It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. Wes N7WS On 5/14/2014 3:09 AM, Joel Black wrote: [snip] This is not directed at you, but it is a preemptive statement to those who will say you do not *need* the SignaLink: I apologize in advance for shouting, YOU NEED A SOUND CARD THAT IS DEDICATED TO AMATEUR RADIO AND *SEPARATE* FROM YOUR MAIN SOUND. Just yesterday, on 20 m JT65, I heard someone's WinXP shutdown sound over the air. You spent a couple of thousand on the K3, please be kind enough to the rest of us to spend another $100 or so and get a nice sound card. Yes, you'll hear all day that the K3 has the ability to take audio directly from the sound card. It is a wonderful feature. I use it. I use it with an amateur radio-dedicated sound card only. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Microbit boxs
Anyone having success hooking up remotely through these boxes in a hotel? Please advise on how your doing so to get by the log in process hotels require. 73’s Ron __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
Well now, *that* is untrue. If you think that is my prescription then so be it, but that's not what I said. Nothing precludes additional features from being options, which aren't necessary for modes one is not interested in. That said, I don't think that a transceiver that is supposed to be state-of-the-art should have to have an extra cost (and bulky) dongle hanging off the back just to have acceptable receiver performance on ten and six meters, just for example. On 5/14/2014 11:41 AM, Joe Subich, W4TV wrote: It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. That's unfair and untrue ... there is a distinct disadvantage to building every option under the sun into a transceiver. The biggest is that all users pay more for the transceiver *and* the built-in options (compare the panadapter in an FT-1200 to the P3 or SDR-IQ) are far inferior to the best of breed that can often be had for little more than the amortized cost of the built-in feature. If one took your prescription, the K3 would only be available in one configuration - with all options built-in at double the price of the base unit. 73, ... Joe, W4TV On 5/14/2014 12:42 PM, Wes (N7WS) wrote: Well, they do say opinions are like... Shout all you want, but it is not imperative that you have a separate sound card. The computer's integrated sound card can be dedicated to ham radio. Keeping Windows sounds from playing through the radio is no different from not transmitting outside the band. It's something that is supposed to be in our skill set. I have both a SignaLink and a Tascam US-100 (highly recommended by Jim Brown). On RTTY, neither of these is either better, or worse, than the built-in card in my laptop, and both require a USB port, something in short supply. It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. Wes N7WS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] I made it to dayton
Sent from my iPhone this time well I made it to Dayton everything is fine I think my Elecraft actually made it through checked luggage I haven't opened it and turned it on yet but I will soon. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Need Audio for SignaLonk from Sub-Rx on my K3
Well now, let's determine what is acceptable receiver performance. If all I want is to work some openings on 10 and 6, the K3 can hold its on with anyone in my experience. Certainly it out performs the IC-9100. For weak signal work, a preamp is a welcome addition. I use ARR P50VDG on 6m and ARR P144VDG on 2m mounted on transfer panels along with appropriate RF amplifiers and a couple of multi-element beams. Jim, W4ATK K-Line On 5/14/2014 2:41 PM, Wes (N7WS) wrote: Well now, *that* is untrue. If you think that is my prescription then so be it, but that's not what I said. Nothing precludes additional features from being options, which aren't necessary for modes one is not interested in. That said, I don't think that a transceiver that is supposed to be state-of-the-art should have to have an extra cost (and bulky) dongle hanging off the back just to have acceptable receiver performance on ten and six meters, just for example. On 5/14/2014 11:41 AM, Joe Subich, W4TV wrote: It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. That's unfair and untrue ... there is a distinct disadvantage to building every option under the sun into a transceiver. The biggest is that all users pay more for the transceiver *and* the built-in options (compare the panadapter in an FT-1200 to the P3 or SDR-IQ) are far inferior to the best of breed that can often be had for little more than the amortized cost of the built-in feature. If one took your prescription, the K3 would only be available in one configuration - with all options built-in at double the price of the base unit. 73, ... Joe, W4TV On 5/14/2014 12:42 PM, Wes (N7WS) wrote: Well, they do say opinions are like... Shout all you want, but it is not imperative that you have a separate sound card. The computer's integrated sound card can be dedicated to ham radio. Keeping Windows sounds from playing through the radio is no different from not transmitting outside the band. It's something that is supposed to be in our skill set. I have both a SignaLink and a Tascam US-100 (highly recommended by Jim Brown). On RTTY, neither of these is either better, or worse, than the built-in card in my laptop, and both require a USB port, something in short supply. It's curious that we have this relatively tiny box of a radio that suffers from poor ergonomics because of it and then we're supposed to festoon it with dongles to make it play. Wes N7WS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jim.w4...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] XV50 for trade
Mike - Assuming your XV50 has the latest PA output module (RA30H0608M) you might like to consider modifying it for 4 metres in readiness for when the FCC allocates the 70MHz band in the USA. I have had great success with this. http://www.g4dmp.co.uk/XV70mods.pdf 73 de David G4DMP In a recent message, Mike Sanders k...@centurytel.net writes I have a clean working XV50 no problems that I would like to trade for an XV432. Anyone interested? 73, Mike K0AZ k...@centurytel.net -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 121, Issue 29
On May 14, 2014 12:01 PM, elecraft-requ...@mailman.qth.net wrote: Send Elecraft mailing list submissions to elecraft@mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to elecraft-requ...@mailman.qth.net You can reach the person managing the list at elecraft-ow...@mailman.qth.net When replying, please edit your Subject line so it is more specific than Re: Contents of Elecraft digest... Today's Topics: 1. K1 (CT1BWW) 2. Re: Need Audio for SignaLink from Sub-Rx on my K3 (Joe Subich, W4TV) -- Forwarded message -- From: CT1BWW ct1...@clix.pt To: elecraft@mailman.qth.net Cc: Date: Wed, 14 May 2014 06:28:51 -0700 (PDT) Subject: [Elecraft] K1 Hi , I am looking for a K1, Four Bands , with ATU preferably with internal battery options. If you have one available, please reply with your offer . If you are from Europe is most easy due the customs . Thanking in advance Marq ct1bww -- View this message in context: http://elecraft.365791.n2.nabble.com/K1-tp7589090.html Sent from the Elecraft mailing list archive at Nabble.com. -- Forwarded message -- From: Joe Subich, W4TV li...@subich.com To: elecraft@mailman.qth.net Cc: Date: Wed, 14 May 2014 11:23:12 -0400 Subject: Re: [Elecraft] Need Audio for SignaLink from Sub-Rx on my K3 I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. No, unless you forget to select the TX antenna when you're not using the LNA feed. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. The EMU0404 has four inputs and four outputs - they can be configured as four mono in/four mono out or two stereo in/two stereo out. In either case you can connect input one to the tip of Line Out and input two to the ring of Line Out and receive both channels at the same time with the proper software (or configure WSJT to use input two for the Sub RX). 73, ... Joe, W4TV On 5/14/2014 10:05 AM, Bob KD7YZ wrote: Well gee ... when I ordered the K3, I got it loaded because I correctly figured that eventually (A) I'd need some other non-usual aspect for my weak signal stuff. And (B) that I would eventually figure out how to read thee manual and also understand (eventually) what I just read. That said, I might have just discovered what the installed KXV3 module could be used for. I just plugged the Rx Down-Line into the KXV3 BNC Rx Ant In. I am now hearing signals from the antenna by selecting K3 front-panel RX ANT . I see the waterfall of the JT65 program react to my switching off the mast-mounted LNA. If that's the case, then the SignaLink is also seeing the signal. I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. I guess Stereo wasn't needed. I wanted the high sampling rate of the 0404, at the time then. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must be a subscriber to post. Elecraft web page: http://www.elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft Digest, Vol 121, Issue 29
Ooo On May 14, 2014 12:01 PM, elecraft-requ...@mailman.qth.net wrote: Send Elecraft mailing list submissions to elecraft@mailman.qth.net To subscribe or unsubscribe via the World Wide Web, visit http://mailman.qth.net/mailman/listinfo/elecraft or, via email, send a message with subject or body 'help' to elecraft-requ...@mailman.qth.net You can reach the person managing the list at elecraft-ow...@mailman.qth.net When replying, please edit your Subject line so it is more specific than Re: Contents of Elecraft digest... Today's Topics: 1. K1 (CT1BWW) 2. Re: Need Audio for SignaLink from Sub-Rx on my K3 (Joe Subich, W4TV) -- Forwarded message -- From: CT1BWW ct1...@clix.pt To: elecraft@mailman.qth.net Cc: Date: Wed, 14 May 2014 06:28:51 -0700 (PDT) Subject: [Elecraft] K1 Hi , I am looking for a K1, Four Bands , with ATU preferably with internal battery options. If you have one available, please reply with your offer . If you are from Europe is most easy due the customs . Thanking in advance Marq ct1bww -- View this message in context: http://elecraft.365791.n2.nabble.com/K1-tp7589090.html Sent from the Elecraft mailing list archive at Nabble.com. -- Forwarded message -- From: Joe Subich, W4TV li...@subich.com To: elecraft@mailman.qth.net Cc: Date: Wed, 14 May 2014 11:23:12 -0400 Subject: Re: [Elecraft] Need Audio for SignaLink from Sub-Rx on my K3 I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. No, unless you forget to select the TX antenna when you're not using the LNA feed. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. The EMU0404 has four inputs and four outputs - they can be configured as four mono in/four mono out or two stereo in/two stereo out. In either case you can connect input one to the tip of Line Out and input two to the ring of Line Out and receive both channels at the same time with the proper software (or configure WSJT to use input two for the Sub RX). 73, ... Joe, W4TV On 5/14/2014 10:05 AM, Bob KD7YZ wrote: Well gee ... when I ordered the K3, I got it loaded because I correctly figured that eventually (A) I'd need some other non-usual aspect for my weak signal stuff. And (B) that I would eventually figure out how to read thee manual and also understand (eventually) what I just read. That said, I might have just discovered what the installed KXV3 module could be used for. I just plugged the Rx Down-Line into the KXV3 BNC Rx Ant In. I am now hearing signals from the antenna by selecting K3 front-panel RX ANT . I see the waterfall of the JT65 program react to my switching off the mast-mounted LNA. If that's the case, then the SignaLink is also seeing the signal. I however do not know if I have opened another can-of-worms by connecting the Rx line to the KXV3 Rx-In connector. Joel, I don't see a Stereo input on the EMU0404 box. I'd only used it a few days when I once wanted to try receiving a VLF station form Sweden. I guess Stereo wasn't needed. I wanted the high sampling rate of the 0404, at the time then. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must be a subscriber to post. Elecraft web page: http://www.elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] CW on SSB
I notice that I can often hear CW on SSB but when I switch to CW, the signal is lost. I'm talking about very strong signals, not stuff in the background. Is there something that I'm doing wrong to not be able to copy them on CW? -- View this message in context: http://elecraft.365791.n2.nabble.com/CW-on-SSB-tp7589112.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW on SSB
Assuming a K3 (not given in subject line): Possibly a case where the sideband received when on SSB is opposite what it is when switching to CW (for the given band). You could try switching to CW-R (for reverse). Bruce N1RX -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HREFAB Sent: Wednesday, May 14, 2014 4:52 PM To: elecraft@mailman.qth.net Subject: [Elecraft] CW on SSB I notice that I can often hear CW on SSB but when I switch to CW, the signal is lost. I'm talking about very strong signals, not stuff in the background. Is there something that I'm doing wrong to not be able to copy them on CW? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] XV50 for trade
Thanks for sharing this, David. I don't know when or if we will ever get a 4M allocation in this country. But, I downloaded your write-up, just in case. I have an XV50 that languishes here. I'll have to pull the cover off and see which power module is in it. Cheers, Bruce N1RX -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David G4DMP Sent: Wednesday, May 14, 2014 4:33 PM To: Mike Sanders Cc: Elecraft Reflector Subject: Re: [Elecraft] XV50 for trade Mike - Assuming your XV50 has the latest PA output module (RA30H0608M) you might like to consider modifying it for 4 metres in readiness for when the FCC allocates the 70MHz band in the USA. I have had great success with this. http://www.g4dmp.co.uk/XV70mods.pdf 73 de David G4DMP In a recent message, Mike Sanders k...@centurytel.net writes I have a clean working XV50 no problems that I would like to trade for an XV432. Anyone interested? 73, Mike K0AZ k...@centurytel.net -- + - - - - - - - - - - - - - - - - + | David M Pratt, Kippax, Leeds. | | Website: http://www.g4dmp.co.uk | + - - - - - - - - - - - - - - - - + __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to bef...@myfairpoint.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW on SSB
And enable auto-shift in the menu when switching from CW to SSB and vice versa, otherwise you will still have to retune to get signal into the passband again. 73, Olli Contest, DX radio projects: http://www.dh8bqa.de Am 14.05.2014 23:01, schrieb Bruce Beford: Assuming a K3 (not given in subject line): Possibly a case where the sideband received when on SSB is opposite what it is when switching to CW (for the given band). You could try switching to CW-R (for reverse). Bruce N1RX -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HREFAB Sent: Wednesday, May 14, 2014 4:52 PM To: elecraft@mailman.qth.net Subject: [Elecraft] CW on SSB I notice that I can often hear CW on SSB but when I switch to CW, the signal is lost. I'm talking about very strong signals, not stuff in the background. Is there something that I'm doing wrong to not be able to copy them on CW? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dro...@necg.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 7Q7WV
http://elecraft.365791.n2.nabble.com/file/n7589116/7Q7WV.png Here is a snapshot of my P3 screen when I worked 7Q7WV. Into the noise but still heard him and made the contact. Keith, XE3/K5ENS -- View this message in context: http://elecraft.365791.n2.nabble.com/7Q7WV-tp7589116.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW on SSB
Sorry for not identifying the mode (it's a KX3) now should be reflected in the title. Anyway, thanks for the input. Switching to rev doesn't seem to have any effect. Seems pretty odd to me that I can hear the signal on SSB but not on CW (Not to say that I don't get CW signals, just that some which appear on SSB aren't available on CW). Still looking for a solution. THanks Jim / KD2FIP -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-CW-on-SSB-tp7589112p7589117.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW on SSB
More info might help, Jim. Band, Freq, filter width settings? For example: Is it possible you are hearing CW at a relatively high pitch while in SSB, and when you switch to CW, it is just outside the (narrower) filter width? Around hear, you mostly here CW with SSB at the lower end of 40M. There is an age old Canadian SSB net that meets right about 7.055, where there is also a lot of CW activity... Bruce N1RX -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HREFAB Sent: Wednesday, May 14, 2014 6:49 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] CW on SSB Sorry for not identifying the mode (it's a KX3) now should be reflected in the title. Anyway, thanks for the input. Switching to rev doesn't seem to have any effect. Seems pretty odd to me that I can hear the signal on SSB but not on CW (Not to say that I don't get CW signals, just that some which appear on SSB aren't available on CW). Still looking for a solution. THanks Jim / KD2FIP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW on SSB
This autoshift feature had the property of reporting the wrong spot frequencies after returning to CW mode. Something like that.. I disabled it because of the problem. This was when it was first introduced, this possibly has been fixed in updates. 73 de Brian/K3KO On 5/14/2014 5:22 PM, Oliver Dröse wrote: And enable auto-shift in the menu when switching from CW to SSB and vice versa, otherwise you will still have to retune to get signal into the passband again. 73, Olli Contest, DX radio projects: http://www.dh8bqa.de Am 14.05.2014 23:01, schrieb Bruce Beford: Assuming a K3 (not given in subject line): Possibly a case where the sideband received when on SSB is opposite what it is when switching to CW (for the given band). You could try switching to CW-R (for reverse). Bruce N1RX -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HREFAB Sent: Wednesday, May 14, 2014 4:52 PM To: elecraft@mailman.qth.net Subject: [Elecraft] CW on SSB I notice that I can often hear CW on SSB but when I switch to CW, the signal is lost. I'm talking about very strong signals, not stuff in the background. Is there something that I'm doing wrong to not be able to copy them on CW? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dro...@necg.de __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to als...@nc.rr.com - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2247 / Virus Database: 3722/6995 - Release Date: 05/14/14 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS THP HL-45B amplifier
I have decided to sell my THP HL-45B amplifier. I use this with my KX3 and it needs about 4 W to drive it to full output of 45W. I can drive the KPA 500 to full output with the KX3 running about 1W to the HL-45B. This is a very nice small 160-6M amp for any QRP radio. It features auto band selection only with the supplied cable for the FT-817. Excellent condition $350. shipped to lower 48 states. Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Fwd: FW: Fwd: Beyond Disrespect!]
*Subject:* Beyond Disrespect!] *Beyond Disrespect!* In the story of Sodom and Gomorrah, Abraham asked the Lord to spare the city if he could find 50 righteous people. God responded to Abraham's plea If I find in Sodom fifty righteous within the city, then I will spare all ...Genesis 18:16-33 The movie Corpus Christi is due to be released this June to August. It is a disgusting film set to appear in America later this year which depicts Jesus and his disciples as homosexuals! As a play, this has already been in theaters for a while. It's called Corpus Christi which means The Body of Christ. It's a revolting mockery of our Lord. But we Christians can make a difference. That's why I am sending this e-mail to you. If you do send this around, we just might be able to prevent this film from being shown in Canada and America . Let's stand for what we believe and stop the mockery of Jesus Christ our Savior. Where do we stand as Christians? I am forwarding this to all I think will respect and appreciate being informed. Please help us prevent such offenses against our Lord. There is no petition to sign, no time limit, or minimum number of people to send this to…It will take you less than 2 minutes! If you are not interested and do not have the 2 minutes it will take to do this, please don't complain if God does not seem to have time for you. *Imagine what would happen if this film were depicting Mohammad in the same way...the Islamic world would be in flames!!*. Apparently, some regions in Europe have already successfully banned the film. All we need is a lot of prayer and a lot of e-mails. *JUST GET THE WORD OUT!* Will God be able to find at least 50 righteous people who are willing to express their concern and voice their opinion against this act of blasphemy? http://free.motitags.com/index.jhtml?partner=%5eB5J%5ezeb002_%5eB5J%5exdm014%5eYYA%5eus - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Microbit boxs
This has been covered extensively on the RemoteRig forum. You can find a lot of material by using the search feature (keywords hotel, Starbucks, etc.) For example: http://www.remoterig.com/forum/index.php?topic=868.msg3490#msg3490 http://www.remoterig.com/forum/index.php?topic=953.msg3878#msg3878 73, Mitch DJ0QN (in Dayton) Mitch Wolfson DJØQN / K7DX Neubiberger Str. 21, 85640 Putzbrunn Skype: mitchwo - Home:+49 89 32152700 - Mobile:+49 172 8374436 Echolink: 3001 - IRLP: 5378 On 14.05.2014 21:39, Ron Gould wrote: Anyone having success hooking up remotely through these boxes in a hotel? Please advise on how your doing so to get by the log in process hotels require. 73’s Ron __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to dj...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Fwd: FW: Fwd: Beyond Disrespect!]
Please do some research before forwarding scam chain letters like this one to a wide audience: http://www.snopes.com/politics/religion/gayjesus.asp Always remember, the Internet is full of scams cleverly aimed at manipulating decent, well-intentioned people. 73, Matt VK2RQ On 15 May 2014, at 12:53 pm, Greg Leber greg7...@gmail.com wrote: *Subject:* Beyond Disrespect!] *Beyond Disrespect!* In the story of Sodom and Gomorrah, Abraham asked the Lord to spare the city if he could find 50 righteous people. God responded to Abraham's plea If I find in Sodom fifty righteous within the city, then I will spare all ...Genesis 18:16-33 The movie Corpus Christi is due to be released this June to August. It is a disgusting film set to appear in America later this year which depicts Jesus and his disciples as homosexuals! As a play, this has already been in theaters for a while. It's called Corpus Christi which means The Body of Christ. It's a revolting mockery of our Lord. But we Christians can make a difference. That's why I am sending this e-mail to you. If you do send this around, we just might be able to prevent this film from being shown in Canada and America . Let's stand for what we believe and stop the mockery of Jesus Christ our Savior. Where do we stand as Christians? I am forwarding this to all I think will respect and appreciate being informed. Please help us prevent such offenses against our Lord. There is no petition to sign, no time limit, or minimum number of people to send this to…It will take you less than 2 minutes! If you are not interested and do not have the 2 minutes it will take to do this, please don't complain if God does not seem to have time for you. *Imagine what would happen if this film were depicting Mohammad in the same way...the Islamic world would be in flames!!*. Apparently, some regions in Europe have already successfully banned the film. All we need is a lot of prayer and a lot of e-mails. *JUST GET THE WORD OUT!* Will God be able to find at least 50 righteous people who are willing to express their concern and voice their opinion against this act of blasphemy? http://free.motitags.com/index.jhtml?partner=%5eB5J%5ezeb002_%5eB5J%5exdm014%5eYYA%5eus - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to matt.vk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Fwd: FW: Fwd: Beyond Disrespect!]
This is likely to waste a lot of Elecraft's Internet bandwidth. I say that not because it's my own personal judgment thing, but because it's inappropriate for this audience. End the flame war before it starts. Do not answer. No counter-arguments will be productive. This thing is basically a chain email, and may be list spam. If you argue the point(s), it will be a waste (also) of your own personal time. The originator may be a net ghost. Eric is the list moderator. I'm not. This is a _request_ to the originator and others that might respond. Follow the list guidelines (http://www.elecraft.com/elecraft_list_guidelines.htm). The guidelines make very good sense if you read them carefully. 73, matt W6NIA On Wed, 14 May 2014 21:53:08 -0500, you wrote: *Subject:* Beyond Disrespect!] *Beyond Disrespect!* In the story of Sodom and Gomorrah, Abraham asked snipped Matt Zilmer, W6NIA www.elecraft.com 831-763-4211 x129 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com