RE: Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

I have attached a screen capture of the top one of the XML files that I import. 
When you mention the content model specified at the top of the file are you 
referring to the DocType? There is a large set of Doctypes that I need to add 
to the FrameMaker 11 structured applications file. I tried adding one of these 
and then importing the xml file that corresponds to it. I am still getting the 
error messages in the console and if I format, save, and then reopen the 
FrameMaker 11 file that I imported, I am losing the formatting, so the problem 
still exists.




From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

[cid:image001.png@01CEC8B9.720A36A0]http://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 [cid:image002.png@01CEC8B9.720A36A0] 
http://www.linkedin.com/in/mattrsullivan 
LinkedInhttp://www.linkedin.com/in/mattrsullivan 
[cid:image003.png@01CEC8B9.720A36A0] http://www.facebook.com/mattrsullivan 
facebookhttp://www.facebook.com/mattrsullivan 
[cid:image004.png@01CEC8B9.720A36A0] http://mattrsullivan.com/ 
mattrsullivan.comhttp://mattrsullivan.com/

On Oct 11, 2013, at 7:35 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:


The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.comhttp://mattrsullivan.com]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.commailto:framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

image001.pnghttp://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 
image002.pnghttp://www.linkedin.com/in/mattrsullivanLinkedInhttp://www.linkedin.com/in/mattrsullivan
 
image003.pnghttp://www.facebook.com/mattrsullivanfacebookhttp://www.facebook.com/mattrsullivan
 
image004.pnghttp://mattrsullivan.com/mattrsullivan.comhttp://mattrsullivan.com/

On Oct 10, 2013, at 11:16 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:



I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeo

Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

I have attached a screen capture of the top one of the XML files that I import. 
When you mention the content model specified at the top of the file are you 
referring to the DocType? There is a large set of Doctypes that I need to add 
to the FrameMaker 11 structured applications file. I tried adding one of these 
and then importing the xml file that corresponds to it. I am still getting the 
error messages in the console and if I format, save, and then reopen the 
FrameMaker 11 file that I imported, I am losing the formatting, so the problem 
still exists.




From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

[cid:image001.png at 
01CEC8B9.720A36A0]<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 [cid:image002.png at 01CEC8B9.720A36A0] 
<http://www.linkedin.com/in/mattrsullivan> 
LinkedIn<http://www.linkedin.com/in/mattrsullivan> [cid:image003.png at 
01CEC8B9.720A36A0] <http://www.facebook.com/mattrsullivan> 
facebook<http://www.facebook.com/mattrsullivan> [cid:image004.png at 
01CEC8B9.720A36A0] <http://mattrsullivan.com/> 
mattrsullivan.com<http://mattrsullivan.com/>

On Oct 11, 2013, at 7:35 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:


The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.com<http://mattrsullivan.com>]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 
<http://www.linkedin.com/in/mattrsullivan>LinkedIn<http://www.linkedin.com/in/mattrsullivan>
 
<http://www.facebook.com/mattrsullivan>facebook<http://www.facebook.com/mattrsullivan>
 
<http://mattrsullivan.com/>mattrsullivan.com<http://mattrsullivan.com/>

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:



I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameM

Re: Structured FrameMaker 11 Error Console

[Matt Sullivan]

Hi Brenda,Either your XML doesn't conform to your internally automated process, or you don't have a working Structured Application for your XML model.As Rick said, the line numbers referring to the XML file will give an indication of what's gone awry. At that point, you need to either modify the XML to fit the StructApp, or modify the StructApp to fit the XML.
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" bgeo...@federatedinv.com wrote:I am performing testing in a Windows 7 environment with Structured FrameMaker 11.I am using an internally automated process that imports an xml feed into a FrameMaker template and produces a formatted FrameMaker document. The FrameMaker 11 error console window that is displaying contains a long list of errors. This is my first time working with FrameMaker 11 and this error console window. I have attached a screen capture of the error console with the line numbering feature activated in the FrameMaker document.I’m noticing that the error console window indicates the line number where an error is occurring. I’m assuming that these line numbers correspond with the line numbers that can be made visible in the FrameMaker document by choosing the line numbering feature from the FrameMaker menu bar. Is this correct?Brenda GeorgeDesk: (724) 720-8491bgeo...@federatedinv.comUnless notified to the contrary by the sender, the recipient should consider the contents of this message including any attachments to be confidential. If you are not the intended recipient and have received this message in error, please contact Federated Investors immediately by forwarding this email tonot...@federatedinv.comand then delete this message from your system. Saving, copying or disseminating an inadvertently received email could violate state and Federal privacy laws. All emails received by or sent from Federated may be provided to regulators or law enforcement agencies, or used for other purposes consistent with Federated's business interests. Thank you for your cooperation.FrameMaker11_Error_console.png___You are currently subscribed to framers asm...@mattrsullivan.com.Send list messages toframers@lists.frameusers.com.To unsubscribe send a blank email toframers-unsubscr...@lists.frameusers.comor visithttp://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.comSend administrative questions tolistad...@frameusers.com. Visithttp://www.frameusers.com/for more resources and info.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Structured FrameMaker 11 Error Console

[Matt Sullivan]

If you open the XML file in a text editor, what's the content model specified at the top of the XML file? Alternately, you can open the XML in Fm8 and use the Set Structured Application File command to see what structapp needs to be added to the Fm11 structapps file.That application needs to be set up in Fm11, and you need to ensure that it is valid. There may be minor tweaks to the structapp needed for use in Fm11.
-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.com@mattrsullivanLinkedInfacebookmattrsullivan.com

On Oct 11, 2013, at 7:35 AM, "George, Brenda (CAI)" bgeo...@federatedinv.com wrote:The process works when I run it using FrameMaker 8 in a Win 7 environment. When I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter these issues. I am also noticing that after flowing an xml file into FrameMaker and format and save it, if I close and then reopen the file in FrameMaker 11, I receive error messages, one indicating that validation of the xml file failed (See attached image named FrameMaker_error.PNG, and another indicating that it can't locate structured application DITA 1.2 (see image named FrameMaker_Colsole_error.PNG). I replaced the structured application file that came with the FrameMaker 11 with the structured application file that I am currently using with FrameMaker 8. I'm guessing that this is the issue.From:Matt Sullivan [mailto:matt@mattrsullivan.com]Sent:Friday, October 11, 2013 10:13 AMTo:George, Brenda (CAI)Cc:framers@lists.frameusers.comSubject:Re: Structured FrameMaker 11 Error ConsoleHi Brenda,Either your XML doesn't conform to your internally automated process, or you don't have a working Structured Application for your XML model.As Rick said, the line numbers referring to the XML file will give an indication of what's gone awry. At that point, you need to either modify the XML to fit the StructApp, or modify the StructApp to fit the XML.-MattMatt R. Sullivanco-authorPublishing Fundamentals: Unstructured FrameMaker 11P:714.798.7596 |C:714.585.2335 |m...@mattrsullivan.comimage001.png@mattrsullivanimage002.pngLinkedInimage003.pngfacebookimage004.pngmattrsullivan.comOn Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" bgeo...@federatedinv.com wrote:I am performing testing in a Windows 7 environment with Structured FrameMaker 11.I am using an internally automated process that imports an xml feed into a FrameMaker template and produces a formatted FrameMaker document. The FrameMaker 11 error console window that is displaying contains a long list of errors. This is my first time working with FrameMaker 11 and this error console window. I have attached a screen capture of the error console with the line numbering feature activated in the FrameMaker document.I’m noticing that the error console window indicates the line number where an error is occurring. I’m assuming that these line numbers correspond with the line numbers that can be made visible in the FrameMaker document by choosing the line numbering feature from the FrameMaker menu bar. Is this correct?Brenda GeorgeDesk: (724) 720-8491bgeo...@federatedinv.comUnless notified to the contrary by the sender, the recipient should consider the contents of this message including any attachments to be confidential. If you are not the intended recipient and have received this message in error, please contact Federated Investors immediately by forwarding this email tonot...@federatedinv.comand then delete this message from your system. Saving, copying or disseminating an inadvertently received email could violate state and Federal privacy laws. All emails received by or sent from Federated may be provided to regulators or law enforcement agencies, or used for other purposes consistent with Federated's business interests. Thank you for your cooperation.FrameMaker11_Error_console.png___You are currently subscribed to framers asm...@mattrsullivan.com.Send list messages toframers@lists.frameusers.com.To unsubscribe send a blank email toframers-unsubscr...@lists.frameusers.comor visithttp://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.comSend administrative questions tolistad...@frameusers.com. Visithttp://www.frameusers.com/for more resources and info.FrameMaker_error.PNGFrameMaker_Colsole_error.PNG___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Structured FrameMaker 11 Error Console

[Robert Lauriston]

The error messages regard a file named PPM_MM_GOVT_SHEET.fm.CD7. Is
that file XML, MIF, or FrameMaker binary (.fm)?

On Thu, Oct 10, 2013 at 11:16 AM, George, Brenda (CAI)
bgeo...@federatedinv.com wrote:
 I’m noticing that the error console window indicates the line number where
 an error is occurring. I’m assuming that these line numbers correspond with
 the line numbers that can be made visible in the FrameMaker document by
 choosing the line numbering feature from the FrameMaker menu bar. Is this
 correct?
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

Thanks for the information.

From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

[cid:image001.png@01CEC674.B8E51550]http://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 [cid:image002.png@01CEC674.B8E51550] 
http://www.linkedin.com/in/mattrsullivan 
LinkedInhttp://www.linkedin.com/in/mattrsullivan 
[cid:image003.png@01CEC674.B8E51550] http://www.facebook.com/mattrsullivan 
facebookhttp://www.facebook.com/mattrsullivan 
[cid:image004.png@01CEC674.B8E51550] http://mattrsullivan.com/ 
mattrsullivan.comhttp://mattrsullivan.com/

On Oct 11, 2013, at 7:35 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:


The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.comhttp://mattrsullivan.com]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers@lists.frameusers.commailto:framers@lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11http://framemaker11book.com/
P: 714.798.7596 | C: 714.585.2335 | 
m...@mattrsullivan.commailto:m...@mattrsullivan.com

image001.pnghttp://twitter.com/mattrsullivan@mattrsullivanhttp://twitter.com/mattrsullivan
 
image002.pnghttp://www.linkedin.com/in/mattrsullivanLinkedInhttp://www.linkedin.com/in/mattrsullivan
 
image003.pnghttp://www.facebook.com/mattrsullivanfacebookhttp://www.facebook.com/mattrsullivan
 
image004.pnghttp://mattrsullivan.com/mattrsullivan.comhttp://mattrsullivan.com/

On Oct 10, 2013, at 11:16 AM, George, Brenda (CAI) 
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com wrote:



I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.commailto:bgeo...@federatedinv.com

Unless notified to the contrary by the sender, the recipient should consider 
the contents of this message including any attachments to be confidential. If 
you are not the intended recipient and have received this message in error, 
please contact Federated Investors immediately by forwarding this email to 
not...@federatedinv.commailto:not...@federatedinv.com and then delete this 
message from your system. Saving, copying or disseminating an inadvertently 
received email could violate state and Federal

Structured FrameMaker 11 Error Console

[Matt Sullivan]

Hi Brenda, 

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt

Matt R. Sullivan 
co-author Publishing Fundamentals: Unstructured FrameMaker 11 
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com 

@mattrsullivan LinkedIn facebook mattrsullivan.com 

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)"  wrote:

> I am performing testing in a Windows 7 environment with Structured FrameMaker 
> 11.
>  
> I am using an internally automated process that imports an xml feed into a 
> FrameMaker template and produces a formatted FrameMaker document.  The 
> FrameMaker 11 error console window that is displaying contains a long list of 
> errors.  This is my first time working with FrameMaker 11 and this error 
> console window. I have attached a screen capture of the error console with 
> the line numbering feature activated in the FrameMaker document.
>  
> I?m noticing that the error console window indicates the line number where an 
> error is occurring. I?m assuming that these line numbers correspond with the 
> line numbers that can be made visible in the FrameMaker document by choosing 
> the line numbering feature from the FrameMaker menu bar. Is this correct?
>  
> Brenda George
> Desk: (724) 720-8491
> bgeorge at federatedinv.com
>  
> Unless notified to the contrary by the sender, the recipient should consider 
> the contents of this message including any attachments to be confidential. If 
> you are not the intended recipient and have received this message in error, 
> please contact Federated Investors immediately by forwarding this email to 
> notify at federatedinv.com and then delete this message from your system. 
> Saving, copying or disseminating an inadvertently received email could 
> violate state and Federal privacy laws. All emails received by or sent from 
> Federated may be provided to regulators or law enforcement agencies, or used 
> for other purposes consistent with Federated's business interests. Thank you 
> for your 
> cooperation.___
> 
> 
> You are currently subscribed to framers as matt at mattrsullivan.com.
> 
> Send list messages to framers at lists.frameusers.com.
> 
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.com
> 
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.

-- next part --
An HTML attachment was scrubbed...
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: twitter.png
Type: image/png
Size: 1331 bytes
Desc: not available
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: linkedin.png
Type: image/png
Size: 1380 bytes
Desc: not available
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: facebook.png
Type: image/png
Size: 1576 bytes
Desc: not available
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: blog.png
Type: image/png
Size: 1222 bytes
Desc: not available
URL: 

Structured FrameMaker 11 Error Console

[Matt Sullivan]

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt

Matt R. Sullivan 
co-author Publishing Fundamentals: Unstructured FrameMaker 11 
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com 

@mattrsullivan LinkedIn facebook mattrsullivan.com 

On Oct 11, 2013, at 7:35 AM, "George, Brenda (CAI)"  wrote:

> The process works when I run it using FrameMaker 8 in a Win 7 environment. 
> When I am attempt to run it using FrameMaker 11 in a Win 7 environment, I 
> encounter these issues. I am also noticing that after flowing an xml file 
> into FrameMaker and format and save it, if I close and then reopen the file 
> in FrameMaker 11, I receive error messages, one indicating that validation of 
> the xml file failed (See attached image named FrameMaker_error.PNG, and 
> another indicating that it can't locate structured application DITA 1.2 (see 
> image named FrameMaker_Colsole_error.PNG). I replaced the structured 
> application file that came with the FrameMaker 11 with the structured 
> application file that I  am currently using with FrameMaker 8. I'm guessing 
> that this is the issue.
>  
> From: Matt Sullivan [mailto:matt at mattrsullivan.com] 
> Sent: Friday, October 11, 2013 10:13 AM
> To: George, Brenda (CAI)
> Cc: framers at lists.frameusers.com
> Subject: Re: Structured FrameMaker 11 Error Console
>  
> Hi Brenda, 
>  
> Either your XML doesn't conform to your internally automated process, or you 
> don't have a working Structured Application for your XML model.
>  
> As Rick said, the line numbers referring to the XML file will give an 
> indication of what's gone awry. At that point, you need to either modify the 
> XML to fit the StructApp, or modify the StructApp to fit the XML.
> 
> -Matt
> 
> Matt R. Sullivan 
> co-author Publishing Fundamentals: Unstructured FrameMaker 11 
> P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com 
> 
> @mattrsullivan LinkedIn facebook 
> mattrsullivan.com 
>  
> On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)"  federatedinv.com> wrote:
> 
> 
> I am performing testing in a Windows 7 environment with Structured FrameMaker 
> 11.
>  
> I am using an internally automated process that imports an xml feed into a 
> FrameMaker template and produces a formatted FrameMaker document.  The 
> FrameMaker 11 error console window that is displaying contains a long list of 
> errors.  This is my first time working with FrameMaker 11 and this error 
> console window. I have attached a screen capture of the error console with 
> the line numbering feature activated in the FrameMaker document.
>  
> I?m noticing that the error console window indicates the line number where an 
> error is occurring. I?m assuming that these line numbers correspond with the 
> line numbers that can be made visible in the FrameMaker document by choosing 
> the line numbering feature from the FrameMaker menu bar. Is this correct?
>  
> Brenda George
> Desk: (724) 720-8491
> bgeorge at federatedinv.com
>  
> Unless notified to the contrary by the sender, the recipient should consider 
> the contents of this message including any attachments to be confidential. If 
> you are not the intended recipient and have received this message in error, 
> please contact Federated Investors immediately by forwarding this email to 
> notify at federatedinv.com and then delete this message from your system. 
> Saving, copying or disseminating an inadvertently received email could 
> violate state and Federal privacy laws. All emails received by or sent from 
> Federated may be provided to regulators or law enforcement agencies, or used 
> for other purposes consistent with Federated's business interests. Thank you 
> for your 
> cooperation.___
> 
> 
> You are currently subscribed to framers as matt at mattrsullivan.com.
> 
> Send list messages to framers at lists.frameusers.com.
> 
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.com
> 
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>  
> 

-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/

Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

Thanks for the information.

From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 11:11 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

If you open the XML file in a text editor, what's the content model specified 
at the top of the XML file? Alternately, you can open the XML in Fm8 and use 
the Set Structured Application File command to see what structapp needs to be 
added to the Fm11 structapps file.

That application needs to be set up in Fm11, and you need to ensure that it is 
valid. There may be minor tweaks to the structapp needed for use in Fm11.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

[cid:image001.png at 
01CEC674.B8E51550]<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 [cid:image002.png at 01CEC674.B8E51550] 
<http://www.linkedin.com/in/mattrsullivan> 
LinkedIn<http://www.linkedin.com/in/mattrsullivan> [cid:image003.png at 
01CEC674.B8E51550] <http://www.facebook.com/mattrsullivan> 
facebook<http://www.facebook.com/mattrsullivan> [cid:image004.png at 
01CEC674.B8E51550] <http://mattrsullivan.com/> 
mattrsullivan.com<http://mattrsullivan.com/>

On Oct 11, 2013, at 7:35 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:


The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.com<http://mattrsullivan.com>]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com<mailto:framers at lists.frameusers.com>
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 
<http://www.linkedin.com/in/mattrsullivan>LinkedIn<http://www.linkedin.com/in/mattrsullivan>
 
<http://www.facebook.com/mattrsullivan>facebook<http://www.facebook.com/mattrsullivan>
 
<http://mattrsullivan.com/>mattrsullivan.com<http://mattrsullivan.com/>

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:



I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com<mailto:bgeorge at federatedinv.com>

Unless notified to the contrary by the sender, the recipient should consider 
the contents of this message including any attachments to be confidential. If 
you are not the intended recipient and have received this message in error, 
please contact Federated Investors immediately by forwarding this email to 
notify at federatedinv.co

Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

The process works when I run it using FrameMaker 8 in a Win 7 environment. When 
I am attempt to run it using FrameMaker 11 in a Win 7 environment, I encounter 
these issues. I am also noticing that after flowing an xml file into FrameMaker 
and format and save it, if I close and then reopen the file in FrameMaker 11, I 
receive error messages, one indicating that validation of the xml file failed 
(See attached image named FrameMaker_error.PNG, and another indicating that it 
can't locate structured application DITA 1.2 (see image named 
FrameMaker_Colsole_error.PNG). I replaced the structured application file that 
came with the FrameMaker 11 with the structured application file that I  am 
currently using with FrameMaker 8. I'm guessing that this is the issue.

From: Matt Sullivan [mailto:m...@mattrsullivan.com]
Sent: Friday, October 11, 2013 10:13 AM
To: George, Brenda (CAI)
Cc: framers at lists.frameusers.com
Subject: Re: Structured FrameMaker 11 Error Console

Hi Brenda,

Either your XML doesn't conform to your internally automated process, or you 
don't have a working Structured Application for your XML model.

As Rick said, the line numbers referring to the XML file will give an 
indication of what's gone awry. At that point, you need to either modify the 
XML to fit the StructApp, or modify the StructApp to fit the XML.

-Matt
Matt R. Sullivan
co-author Publishing Fundamentals: Unstructured FrameMaker 
11<http://framemaker11book.com/>
P: 714.798.7596 | C: 714.585.2335 | matt at mattrsullivan.com<mailto:matt at 
mattrsullivan.com>

[cid:image001.png at 
01CEC66D.8A6828E0]<http://twitter.com/mattrsullivan>@mattrsullivan<http://twitter.com/mattrsullivan>
 [cid:image002.png at 01CEC66D.8A6828E0] 
<http://www.linkedin.com/in/mattrsullivan> 
LinkedIn<http://www.linkedin.com/in/mattrsullivan> [cid:image003.png at 
01CEC66D.8A6828E0] <http://www.facebook.com/mattrsullivan> 
facebook<http://www.facebook.com/mattrsullivan> [cid:image004.png at 
01CEC66D.8A6828E0] <http://mattrsullivan.com/> 
mattrsullivan.com<http://mattrsullivan.com/>

On Oct 10, 2013, at 11:16 AM, "George, Brenda (CAI)" mailto:BGeorge at federatedinv.com>> wrote:


I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com<mailto:bgeorge at federatedinv.com>

Unless notified to the contrary by the sender, the recipient should consider 
the contents of this message including any attachments to be confidential. If 
you are not the intended recipient and have received this message in error, 
please contact Federated Investors immediately by forwarding this email to 
notify at federatedinv.com<mailto:notify at federatedinv.com> and then delete 
this message from your system. Saving, copying or disseminating an 
inadvertently received email could violate state and Federal privacy laws. All 
emails received by or sent from Federated may be provided to regulators or law 
enforcement agencies, or used for other purposes consistent with Federated's 
business interests. Thank you for your 
cooperation.___


You are currently subscribed to framers as matt at 
mattrsullivan.com<mailto:matt at mattrsullivan.com>.

Send list messages to framers at lists.frameusers.com<mailto:framers at 
lists.frameusers.com>.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com<mailto:framers-unsubscribe at 
lists.frameusers.com>
or visit 
http://lists.frameusers.com/mailman/options/framers/matt%40mattrsullivan.com

Send administrative questions to listadmin at frameusers.com<mailto:listadmin 
at frameusers.com>. Visit
http://www.frameusers.com/ for more resources and info.

-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20131011/cbc51b84/attachment.html>
-- next part --
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1331 bytes
Desc: image001.png
URL: 
<http://lists.frameusers.com/pipermail/framers/attachm

Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to not...@federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.attachment: FrameMaker11_Error_console.png___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Structured FrameMaker 11 Error Console

[Rick Quatro]

Hi Brenda,

 

The line numbers in the error log refer to the lines in the incoming XML
file.

 

Rick

 

Rick Quatro

Carmen Publishing Inc.

585-366-4017 **NEW**

r...@frameexpert.com

 

 

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of George, Brenda
(CAI)
Sent: Thursday, October 10, 2013 2:17 PM
To: framers@lists.frameusers.com
Subject: Structured FrameMaker 11 Error Console

 

I am performing testing in a Windows 7 environment with Structured
FrameMaker 11.

 

I am using an internally automated process that imports an xml feed into a
FrameMaker template and produces a formatted FrameMaker document.  The
FrameMaker 11 error console window that is displaying contains a long list
of errors.  This is my first time working with FrameMaker 11 and this error
console window. I have attached a screen capture of the error console with
the line numbering feature activated in the FrameMaker document.

 

I'm noticing that the error console window indicates the line number where
an error is occurring. I'm assuming that these line numbers correspond with
the line numbers that can be made visible in the FrameMaker document by
choosing the line numbering feature from the FrameMaker menu bar. Is this
correct?

 

Brenda George

Desk: (724) 720-8491

bgeo...@federatedinv.com

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Structured FrameMaker 11 Error Console

[George, Brenda (CAI)]

I am performing testing in a Windows 7 environment with Structured FrameMaker 
11.

I am using an internally automated process that imports an xml feed into a 
FrameMaker template and produces a formatted FrameMaker document.  The 
FrameMaker 11 error console window that is displaying contains a long list of 
errors.  This is my first time working with FrameMaker 11 and this error 
console window. I have attached a screen capture of the error console with the 
line numbering feature activated in the FrameMaker document.

I'm noticing that the error console window indicates the line number where an 
error is occurring. I'm assuming that these line numbers correspond with the 
line numbers that can be made visible in the FrameMaker document by choosing 
the line numbering feature from the FrameMaker menu bar. Is this correct?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



Unless notified to the contrary by the sender, the recipient should
consider the contents of this message including any attachments to
be confidential. If you are not the intended recipient and have
received this message in error, please contact Federated Investors
immediately by forwarding this email to notify at federatedinv.com and
then delete this message from your system. Saving, copying or
disseminating an inadvertently received email could violate state
and Federal privacy laws. All emails received by or sent from
Federated may be provided to regulators or law enforcement
agencies, or used for other purposes consistent with Federated's
business interests. Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 

-- next part --
A non-text attachment was scrubbed...
Name: FrameMaker11_Error_console.png
Type: image/png
Size: 35485 bytes
Desc: FrameMaker11_Error_console.png
URL: 

Structured FrameMaker 11 Error Console

[Rick Quatro]

Hi Brenda,



The line numbers in the error log refer to the lines in the incoming XML
file.



Rick



Rick Quatro

Carmen Publishing Inc.

585-366-4017 **NEW**

rick at frameexpert.com







From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of George, Brenda
(CAI)
Sent: Thursday, October 10, 2013 2:17 PM
To: framers at lists.frameusers.com
Subject: Structured FrameMaker 11 Error Console



I am performing testing in a Windows 7 environment with Structured
FrameMaker 11.



I am using an internally automated process that imports an xml feed into a
FrameMaker template and produces a formatted FrameMaker document.  The
FrameMaker 11 error console window that is displaying contains a long list
of errors.  This is my first time working with FrameMaker 11 and this error
console window. I have attached a screen capture of the error console with
the line numbering feature activated in the FrameMaker document.



I'm noticing that the error console window indicates the line number where
an error is occurring. I'm assuming that these line numbers correspond with
the line numbers that can be made visible in the FrameMaker document by
choosing the line numbering feature from the FrameMaker menu bar. Is this
correct?



Brenda George

Desk: (724) 720-8491

bgeorge at federatedinv.com



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20131010/b9618ff0/attachment.html>

Structured FrameMaker 11 Error Console

[Robert Lauriston]

The error messages regard a file named PPM_MM_GOVT_SHEET.fm.CD7. Is
that file XML, MIF, or FrameMaker binary (.fm)?

On Thu, Oct 10, 2013 at 11:16 AM, George, Brenda (CAI)
 wrote:
> I?m noticing that the error console window indicates the line number where
> an error is occurring. I?m assuming that these line numbers correspond with
> the line numbers that can be made visible in the FrameMaker document by
> choosing the line numbering feature from the FrameMaker menu bar. Is this
> correct?