[no subject]
Hi all, (My mailserver is currently offline and this address is not subscribed, please cc me in all replies, thanks) I'm waiting for my new internet connection to be setup here, and in the meantime I'm starting to configure my network accordingly. I'm going to have a static IP - say xx.xx.yy.zz - and a subnet as follows: xx.xx.xx.zz/28 My plan is to run a FreeBSD router to have the subnet routed through the static IP. I've already got the static routes I need to add figured out. I still have some questions at this point (this setup is new to me): 1. Do I need to inform the ISP of my intentions so that people can actually connect to an IP which is part of my subnet, but behind this router I intend to build? (I didn't think it was necessary until I read 19.2.5 in the handbook - it doesn't seem like it's necessary based on that alone, but it has placed some doubt in my mind). 2. I currently run my FreeBSD router on a cable connection while waiting for the new ISP to get setup. I use NAT to translate the EXT. IP to the internal ones of my lan. I don't need to run nat for the setup I plan to have do I? 3. Finally, I've read (briefly thus far) about routed on FreeBSD. Would this daemon be used in such a way that I don't even need to add static routes for LAN? Again, this address is not subscribed, so please answer by putting my address in the cc: field. Thanks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello, I have FreeBSD 4.8 installed on my 400mhz amd with 256mb ram (this is probably useless info) I was wondering how I install packages like emacs? are they on the CD? can I choose them from the install menu? the reason I ask is because I didn't see it listed in the install options but maybe I over looked it... sorry this is like 20 questions, but also normally when I used freebsd at work I and would be typing a path and I could hit tab and it would finish the path for me or tell me what file names are close/similar but when I hit tab on my FreeBSD box it just tabs spaces... I figured maybe I was using the wrong shell... if so how do I change shells? is this the problem? the reason I figured it was the wrong type of shell... is because del/delete doesn't backspace either, it gives me weird characters like ^something the delete/del problem might just be that is a rule my admin had set or something but I don't know so I'm not really concerned with that but if it helps to understand what I might be doing wrong then shout it out right? thanks in advance for any help/advice you can give -Mark Hillis- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
yes i hop you can help me are now some one huw can ? some how i lost my dhcp -ip does not read how do i find fix-howard --e-mail--[EMAIL PROTECTED] this one __ howard hertter ICQ#: 349209925 Current ICQ status: + More ways to contact me __ online?icq=349209925img=21 Description: Binary data ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi! I've FreeBSD-4.8-release with two Ethernet adapters Intel82257. Before I'd 4.7-release and I'd no problem. Now if I up second interface fxp1, command netstat -r can't correctly issue routing table from kernel. --- # ifconfig fxp1 up # # netstat -r Routing tables Internet: DestinationGatewayFlagsRefs Use Netif Expire defaultgate-bb-fe0-1 UGSc24 fxp0 localhost localhost UH 0 45lo0 --- As soon as I down fxp1, netstat -r work wright. --- # ifconfig fxp1 up # # netstat -r Routing tables Internet: DestinationGatewayFlagsRefs Use Netif Expire defaultgate-bb-fe0-1 UGSc25 fxp0 localhost localhost UH 0 67lo0 195.161.208.128/26 link#1 UC 50 fxp0 aqua 00:20:ed:1d:ec:0e UHLW1 373 fxp0989 lion 00:90:27:23:cb:38 UHLW616408 fxp0 1142 gate-bb-fe0-1 00:02:b9:b9:50:b0 UHLW30 fxp0 1059 max1 00:c0:7b:a9:d3:3f UHLW00 fxp0 1186 alteon-bb-900:60:cf:4a:d1:80 UHLW00 fxp0 1129 If fxp1 up, I may ping address on this interface, but telnet is very slowly. Can you help me, please? -- Lev Klimin mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, Per the recommendation, I had the system administrators have removed the cover and cleanse the dust. They also noted an error with the server, it is as follows: The following error was printed on the screen, it appears the server utilized all the console buffer space making keyboard interaction impossible. vm_fault: pager read error, pid 1 (init) Does this mean anything to anyone? any suggestions? -Antonio === Sounds like hardware problems caused by overheating. Open the PC cover and blow out all the dust. Leave cover off and see if problem reoccurs. ---Original Message- [EMAIL PROTECTED] I'm a newbie running FreeBSD (I believe it's 4.4... am at the moment unable to check, as the computer is down) to host some of my websites. I sent a query to this mailing list before about receiving some errors when trying to access my website, after which, ssh would stop logging me into the server (Connection closed by [server ip]), and all web pages would bring up a Forbidden error. After this, the server would go down completely... or at least I was unable to ping it, access it through http, or anything else that I tried... This has been happening regularly, about every 3-7 hours after the computer is rebooted. However, while the computer is running, I can distinguish nothing out of the ordinary. However, tonight, it crashed while i was logged in through ssh. Suddenly, almost every command that I issued or program I tried to run came back as Device not configured. e.g.: # reboot /sbin/reboot : Device not configured Some things work... (lynx, ping, ps -- all seem to work fine) but many other commands just return the Device not configured or Segmentation fault errors. Also very odd: ls, cd, pwd, etc. seem to work fine, but when I ls any directory, no files come up. It is completely blank Anyway, I'm very scared and at my wit's end. The system will appear normal once it's rebooted, but the same thing will happen within a few hours... Any suggestions on what to look for? Are there certain log files that may contain information on this? I think the most recent thing I did to the server was several weeks ago, when I installed wusage to analyze web logs... i had since deleted it. Maybe something went wrong there? I have also noticed two processes running that I hadn't seen before: 6 con Is+ 0:00.11 sh /etc/rc autoboot 447 con I+ 0:00.00 sh /etc/rc autoboot Errors when trying to access a php/mysql driven website Warning: open(/tmp/sess_4a23ba911863d07812e9cdf99656586f, O_RDWR) failed: Device not configured (6) in Warning: open(/tmp/sess_4a23ba911863d07812e9cdf99656586f, O_RDWR) failed: Device not configured (6) in Unknown on line 0 Warning: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/tmp) in Unknown on line 0 === I then try to login via ssh... but I get Connection closed by [my ip]. _ online games and music with a high-speed Internet connection! Prices start at less than $1 a day average. https://broadband.msn.com (Prices may vary by service area.) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, I'm am running 4.9 release. A package called hpijs1.4.1 is installed. I now would like to upgrade to hpijs-1.5. However, this package is only available in 4.9-stable. Can I install the package from 4.9-stable or is it advisable to stick to the packages in my release? Thanks, Rahul __ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello I am Olcay Alic from Turkey. I have setup a FreeBSD machine and had problems with trying startx and/or X.I think this is because I did not correctly entered the values for monitor specification.I tried to run xdm so I opened the etc/ttys file with ee editor and the made what was written in your freeBSD.handbook (ttyv8 /usr/X11R6/bin/xdm -nodaemon xterm off secure change I made is off to on.) then the document says that I run KILL -HUP 1 to sen a sighup to init processto force it to re-read its configuration file. Now I can't use my computer I tried to close from the buttun and then open again several times but after I see login: prompt on the screen in 1 second the monitor is black!I can't do anything now,can't control the monitor.I can't see it. Please urgent help. Thanks in advance. Olcay ALIC ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, Could you please tell me how i know if PHP4 is installed and configured correctly on my web server. The reason why i ask is that i have my own web server and the guy that set the server up has just updated the Freebsd o/s (4.8) and he assures me that i can now use PHP4 scripts, but when i run a basic php test script nothing happens. Apache is installed along with linux if that helps. If you could shed some light on this matter it would be much appreciated. Regards, Edward Hart. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello, I work at Las Positas College as a Technical Mentor, in a work-based learning program called LaPTechS. Many of our students have expressed an interest in learning about Linux and Unix. I was wondering if it is possible for a representative from your organization to come speak at a seminar for our students. The students dont have a working knowledge of Linux or Unix but are very curious to learn. Our seminars are usually an hour long, but you can choose how long you would want to speak. We are mostly interested to know some of the history of Linux and Unix, and also how to install an OS like FreeBSD. Thank you for your time and consideration. Sincerely, Michael Bond Technical Mentor, LaPTechS Las Positas College 3033 Collier Canyon Rd. Livermore, CA 94551 925.371.3836 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Jez, Have you checked the integrity of the installation CD you're trying to install from? It could be that it's corrupted and causing problems. I did check the MD5 checksums -- but in addition to the CD install, I also tried a variety of other install methods - booting to CD and doing FTP install, booting to floppy and installing on a variety of different FTP servers. The installation process is usually fairly painless and generally very fast - as less than 5 minutes for a minimal install on an amd athlon 2000. Certainly shouldn't be taking as long as you mention :( Unfortunately, not painless or fast for me. :-( Presumably you've read the handbook as well: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/install.html I've looked there and have become quite intimate with the menus it documents. I like to think I could go through the install options blind-folded at this point. :-) if you know enough to use Google you no doubt stumbled across the handbook pretty early on :=) Googling has brought to my attention that many other people have had this problem, and also have not seemed to have found answers, as I alluded to in the original post. One found that when switching from the CD to FTP install it worked; this did not work for me. Thanks for your input. -Nick -- Jez Hancock - System Administrator / PHP Developer ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I've installed 4.8 off CD onto a PII-200 w/ 80MB ram and two ide's, primary has 1GB, secondary has 2GB. Don't understand how to allocate /usr to the secondary ide or even give it more space on the primary, and I run out of room with only 1/4 GB for /usr to install most of the binaries. Would like for starters to allocate both those hd's to FreeBSD and have enough room to install Samba and see if I can then communicate over my LAN. Guess this alot, huh? Marty Landman Face 2 Interface Inc 845-679-9387 Sign On Required: Web membership software for your site Make a Website: http://face2interface.com/Home/Demo.shtml ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD 4.3-RELEASE FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001 [EMAIL PROTECTED]:/usr/src/sys/compile/GENERIC i386 I received this message on my FreeBSD system in root windows: sendmail[897]: h9V0K0r00897: forward /home/sstoller/.forward: Group writable directory It doesn't tell me which directory it is complaining about so I don't know which one to fix. (Naturally I presume that it is one owned by a system user, e.g. root , say /etc or the like.) This should be corrected to tell root which directory it is complaining about. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, I'm about to set up several identical machines (identical hardware both in terms of processor, harddisk, LAN etc.) with FreeBSD 4.9. The only difference between these machines is they're running under different IP-addresses - all the rest (kernel, software,...) should be identical. In order to keep installation effort at a minimum I'm looking for a way to clone FreeBSD installations from one machine to another. To be specific: o) Is there a way to clone one machine to another one over the net, i.e. by writing an image file from one machine to a server and then setting up the other machines from that image? o) Is there a way to clone FreeBSD installations by copying the entire FreeBSD slice to another drive (I thought about installing the harddisks of the other machines in the master machines and then copying the installtion) (Is Knoppix capable of doing this?) Anybody sucessfully tried cloning installations like this? TIA for your help, -ewald ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hey, Does anyone on the FreeBSD list use arpwatch arpsnmp? Arpwatch works great, however Id liked to use arpsnmp to monitor remote sites. The arpfetch script gives me the output below, however when I attempt to import that with arpsnmp I get syntax errors. I think it has something to do with the format, however I cannot figure what it should be. Any help would be greatly appreciated (btw please cc: me, Im no longer on the Freebsd list) ip-mib::ipnettomediaphysaddress.4.18.13.24.129:=:string:::1:c9:30:c8:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.130:=:string:::a0:c9:da:d2:81 ip-mib::ipnettomediaphysaddress.4.19.13.24.135:=:string5e::1:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.138:=:string:::10:db:28:1b:21 ip-mib::ipnettomediaphysaddress.4.19.13.24.141:=:string5e::1:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.142:=:string5e::1:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.143:=:string5e::1:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.144:=:string5e::1:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.156:=:string5e::1:1 ip-mib::ipnettomediaphysaddress.4.19.13.24.157:=:string:::a0:8e:32:93:ae ip-mib::ipnettomediaphysaddress.4.19.13.24.158:=:string:::a0:8e:32:8d:be However I when try to use this output with arpsnmp I get; bash# arpsnmp output file_loop: output:1 syntax error #1 Any help would be appreciated, Thanks! - Do you Yahoo!? Exclusive Video Premiere - Britney Spears ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
! - , , . mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello, I'm using FreeBSD 5.1 like ppp server with callback cbcp option for a windows clients. After windows client call, the ppp displays callback window. If I press the cancel button ppp makes disconnect. Is it normal behaviour ? When I'm using windosw2000 Remote Access Server and If I press the cancel button ppp doesn't disconnect a connection, ppp only cancels callback negotiation. How can I configure ppp for it only cancels cbcp negotiation and doesn't disconnect a connection ? /etc/ppp/ppp.conf - default: set log Phase Chat LCP IPCP CCP tun command set device /dev/cuaa4 set speed 115200 set redial 5 3 set dial ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \\ AT \ OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT disable ipv6cp server: enable pap set callback cbcp none set redial 1 1 set ifaddr 10.50.31.252 10.50.31.253 255.255.255.0 enable proxy accept dns /etc/ppp/ppp.secret # Authname Authkey Peer's IP addressLabel Callback ras rasbsd ** * Kind Regards, Maxim Maslennikov. UralCom Ltd Development department Phone: +7 3422 900080 Fax: +7 3422 900546 Mobile: +7 902 4719916 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- Do AMD Duron processors fall under the AMD64 release category, because on your website it only says that AMD Opteron and Athlon prcoessors are the AMD64 architecture. Thanks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
why is it that freebsd 4.7 was the only stable working alpha version you had and now its gone?? 4.8, 5.0, 5.1 none of em work... only 4.7 did as a mini-install. the alphas a nice a pc but i think im going to have to throw these away if free software is all thats out there. this whole freebsd thing has been a nightmare. after all the problems ive had trying to install it on the alpha, im glad bill gates still makes intel software! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
thanks god for uncle bill u guys r assholes your website sucks! cant find shit _ Cheer a special someone with a fun Halloween eCard from American Greetings! Go to http://www.msn.americangreetings.com/index_msn.pd?source=msne134 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I have this problem: panic: pmap_mapdev: Couldn't alloc kernel virtual memory when i want install the freebsd 5.1-RELEASE in my PC(Athlon 900 Mhz, 128 MB RAM), Can you help me :( TNKS WebMaster Ruben\Espadas\Pacheco /WebMaster Arquitectura/Digital ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- Is the AMD iso image miniinst.iso the equivalent of the first disk in an i386 install. If not is there anything else i need besides the second disk? -Thanks ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, httpd is started by /usr/local/etc/rc.d/apache.sh and named is started at boot time in /etc/rc.conf: just enable your named there, named_enable=YES \jett tayer Hello: I'm sorry to ask this. I have searched the archive mailing list. I've just installed 5.1 and I notice that named and httpd is started by gndc. I've checked /etc/rc.conf and /etc/defaults/rc.conf and named_enable=NO. I'm not sure waht I'm missing. Is there some script starting these? Thanks in Advance Tony ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello, When downloading freebsd I am asked what architecture. What does this mean and how do I determine this? Thanks, Piet Slaghekke ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I am new to FreeBSD, and when I am trying to install I get this message at the end Unable to get packages/Index file from selected media I am using the 4.7 mini iso images and I got it off of the ftp. Where do I get the index file from. Thank you Jeremy ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
On Mon, 22 Sep 2003 19:57:32 -0700, [EMAIL PROTECTED] wrote: FreeBSD- I have a question about Miny ITX processors (http://www.mini-itx.com for more info) EPIA processors. The release for it isn't at the FTP site, unless it is compadible with some other processor type. Thanks. Look here: http://apollo.backplane.com/FreeBSD/epia/review.html /\ Vincent ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- I have a question about Miny ITX processors (http://www.mini-itx.com for more info) EPIA processors. The release for it isn't at the FTP site, unless it is compadible with some other processor type. Thanks. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
so you go to your site and get the stable packages and put them on the hard drive. you go to that folder and do a pkg_add * to add all the packages in the x11 directory, thinking this will get you a GUI but it throws a bunch of package not found errors and nothing works. what did i do wrong and what do i do next cause this isnt covered in the manual anywhere. thanks j ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, I've been having a problem latly, where when I try to install any port it says checking to see if port _x_ is installed then the make dies. I've looked into the make files a bit, and saw a do-install so i tried make do-install and it works some times. Anyways.. I'm running 5.1 i ran my stable-supfile and went into /usr/src/usr.sbin/pkg_install and did a make, only to get this error.. http://www.bignose.ca/~bignose/make.txt If anyone has any help, that would be great, I'm not a c guy, so hunting down this error would not get me too far. Thanks. Jeff. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
PLEASE NOTE: ~~~ This e-mail message is confidential and privileged. It is intended solely for the use of the individual or entity to whom it is addressed. If you are not the intended recipient, please accept our apologies; do not disclose, copy or distribute information in this e-mail or take any action on reliance of its content. To do so is strictly prohibited and may be unlawful. Please inform us that the message has been sent to you in error before deleting it. Thank you for your co-operation. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I was mount smb file system with mount_smbfs -c l, but file and folder names are don't convert to lowercase, whats wrong? I dont buid new kernel, but mount_smbfs is work, it's load kernel modules for smb. -- Best regards, anton mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
unsubscribe freebsd-questions [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I was mount smb file system with mount_smbfs -c l, but file and folder names are don't convert to lowercase, whats wrong? I was build kernel with options: options NETSMB options NETSMBCRYPTO options LIBMCHAIN options LIBICONV options SMBFS And I was install pakage libiconv-1.8_2 I was mount smbfs: #mount_smbfs -I server.mydomain -E koi8-r:cp866 -c l //[EMAIL PROTECTED]/fold ~/smbfs -- Best regards, anton mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I was mount smb file system with mount_smbfs -c l, but file and folder names are don't convert to lowercase, whats wrong? Why uppercase and lowercase names are identical when I will create file with name in another case? -- Best regards, anton mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, I inserted an USB stick into a 5.1 FreeBSD box and was pleasantly surprised to see it being autodetected: umass0: UrDisk USB FLASH DISK, rev 1.10/1.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: UrDisk USB FLASH DISK 1.00 Removable Direct Access SCSI-2 device da0: 1.000MB/s transfers da0: 15MB (32000 512 byte sectors: 64H 32S/T 15C) ... and I've been sending patches as I get my hands on more brands/types. Unfortunately, this isn't one of mine, so I can't claim credit ;) But when I try to mount it, I'm getting # mount -t msdos /dev/da0 /mnt msdosfs: /dev/da0: Invalid argument See if there is a slice for the device, e.g. /dev/da0s1. Also, you can try a fdisk on the device, in case it doesn't use the first slice (I've yet to see this on USB devices, but ZIP drives used to use slice 4 for their DOS partition). If you still can't get it to work, drop me a line, and I can try to provide some other pointers. On most devices, its a matter of tweaking the protocol settings in umass.c. Assumed I will get it working soon, how can I achieve that it is automatically mounted? Is there a user wrapper to mount/unmount the USB stick? You should be able to set something up in /etc/usbd.conf for attach. Detach may be a bit tricker, as you should unmount the filesystem before pulling the stick. -Brian ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I download 5.1 ISO freebsd from a ftp, and I use UltraISO extract it to d:\freebsd ..My computer is parted two primary partitions C: D:. On D: ,there is few files , I want to install freebsd on d:.how can i do .I can not use floppy to boot .how to use fbsdboot.exe to boot. Thank you . _ MSN Hotmail http://www.hotmail.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi All!!! Does FreeBSD support C++ or support C only? -- Best regards, Denis [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi and concratulations Just one question: am I or not able to copy freeBSD and ad it as a present to , lets say ,a magazin? I found the section with the ports a bit confusing so I´d like to make sure, not to violate any copyright. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi All, I need your help friends. I have cyrus mailbox at my place. It generates following report. I think these are SPAM which are from Info a/c setting in my server. Just want to learn how to get rid of these spams. Thanks a lot for your advice in advance. Hi All, I need your help friends. FYI i am new to FreeBSD world. I have cyrus mailbox at my place. It generates following report. I think these are SPAM which are from Info a/c setting in my server. Want to learn how to get rid of these spams how can i look under socket. Thanks a lot for your advice in advance. mailbox.infoglobe.com daily run output Mail in local queue: -Queue ID- --Size-- Arrival Time -Sender/Recipient--- A5806147C89 2532 Sat Aug 30 00:29:12 [EMAIL PROTECTED] (host /var/imap/socket/lmtp[/var/imap/socket/lmtp] said: 452 4.2.2 Over quota (in reply to RCPT TO command)) [EMAIL PROTECTED] A536A147CD5 3328 Sun Aug 31 04:25:42 [EMAIL PROTECTED] (host /var/imap/socket/lmtp[/var/imap/socket/lmtp] said: 452 4.2.2 Over quota (in reply to RCPT TO command)) [EMAIL PROTECTED] AC5FE14781D 6417 Sat Aug 30 11:51:13 [EMAIL PROTECTED] (host /var/imap/socket/lmtp[/var/imap/socket/lmtp] said: 452 4.2.2 Over quota (in reply to RCPT TO command)) [EMAIL PROTECTED] A05C7147C5D 104781 Fri Aug 29 12:07:48 [EMAIL PROTECTED] (host /var/imap/socket/lmtp[/var/imap/socket/lmtp] said: 452 4.2.2 Over quota (in reply to RCPT TO command)) [EMAIL PROTECTED] -- 5956 Kbytes in 182 Requests. Security check: (output mailed separately) ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello, I have been wrestling with my laptop for days now, and I'm not sure what to do. I wanted to put 5.1 on it, but booting from the CD failed. The boot halted at at line saying: agp0: Intel 82443BX (440 BX) host to PCI bridge mem 0-0x3ff at device 0.0 on pci0 After it was clear that the boot was not going to proceed, I cycled the power and the same thing happened repeatedly. I had an old 4.6.2 CD sitting around, so I installed that. I was happy that this worked and I proceeded to cvsup to the current version of 4.8 (no longer trying 5.x). After doing a make buildworld, buildkernel, installkernel, the system hangs-up on boot at the exact same line. Does anyone have any idea how I can fix this? I would really like to get FreeBSD on this machine. :) tia Eric ___ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
On Tue, 2003-09-02 at 14:32, Ed Alley wrote: I'm running FreeBSD-4.8. Sometimes the file permissions for /dev/null get mysteriously changed by some unknown process to: crw--- 1 root wheel 2, 2 Sep 2 11:20 /dev/null On Tue, 2003-09-02 Adam McLaurin wrote: That's very strange indeed. Have you tried using chflags to prevent the permissions from being changed? This should do the trick, albeit a dirty hack. Sorry, I didn't mention that I tried setting flags on /dev/null: chflags schg /dev/null What happens is that sendmail complains that it can't open /dev/null. Hey! I just realized that this may be a clue! Does sendmail fiddle with /dev/null? What happens if sendmail tries to lock /dev/null after it opens it? Does schg prevent fcntl from locking /dev/null, if that is what sendmail uses? Ed Alley ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
__ Yahoo! Plus - For a better Internet experience http://uk.promotions.yahoo.com/yplus/yoffer.html ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi Freebsd stuff, Good Afternoon. Can yah please help me out?i live in Philippines.i am using windows here and i want to change it into FREEBSD new version. i already downloaded all files here:ftp://ftp5.us.freebsd.org/pub/FreeBSD/ i read the txt files but it doesnt shows the manual on how to install.im kinda new to it.how can i install the FREEbsd?can i use it as dual?like windows and FREEBSD by booting or can select which one to use?All i want is to use both coz i really dont know if there is a word,exceel,photoshop,access,power point and frontpage just like in windows.can i use two OS (WIndows and FREEBSD)?Take Care. glitch - Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello freebsd-questions, I'v problem with upgarade FreeBSD-4.8 I intut: # cd /usr/src # make buildworld Makefile:137: *** missing separator. Stop. What is problem? -- Best regards, anton mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I'm trying to install FreeBSD 5.0 on my Toshiba Portege 7010CT laptop (Pentium II, 300MHz, 160Meg RAM, 20G HDrive). 4.7 and 4.8 both installed fine, but I was unable to get X to install, and wanted some of the new features, so figured I'd try 5.0. No luck. No matter how I try it, I get the message Unable to transfer the bin distribution from media. The other distributions (doc, etc.) transfer just fine. I've tried the following: - downloaded and burned CDs from ISO images (downloaded twice, burned twice to make sure not a media problem); also tried 5.1 with the same result. - connect via ftp server I've booted from floppy or from the previously-installed 4.7/4.8 FreeBSD. I'm beginning to wonder if there's some incompatibility that I don't know about. Any suggestions? I've just started trying to use FreeBSD. Thanks...jon -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Connecting Business and Technology Jon Seidel, CMC +1-510-530-6314 EDP Consulting, Inc.www.edpci.com CMC (Certified Management Consultant) is a certification mark awarded by the Institute of Management Consultants USA and represents evidence of the highest standards of consulting and adherence to the ethical canons of the profession. Less than 1% of all consultants have achieved this level of performance. See www.imcusa.org/hireacmc.acgi. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello, I am unable to install freebsd with the ISOs that were provided on the freebsd ftp site. I have burned them onto a cd and I have attempted to boot from them. However, I have found that they will not boot. I am working on a i386 architecture, using both a p3 450mhz, 384MB RAM, ameritech bios box and a celeron 1ghz 384MB RAM with a dell bios laptop. I have checked the boot sequences and have corrected them so thatg they boot fromt he cd rom. I'm sure this is just me being rather stupid in some way, but, any guidance that you could provide would be lovely. Regards, Raine James Igoe _ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hello i bought freebsd desktop edition and it didnt reconize my graphics card so now i need to know what would be a powerful graphics card to install on my system that it will reconize ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hi. im trying to install freebsd 5.1 to my alpha's. im new to all this but im pretty sure ive done things properly so im sort of confused. here goes.. i downloaded the kern.flp and mfsroot.flp using an ftp client in binary mode. i used brand new disks which i formatted freshly before using both fdimage and rawrite to write the images. (i've tried this process about a half dozen times now.. ) each time i get an error that the disks arent bootable. (block 0 errors) any ideas? thanks J ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hello my screen size was all messed up it was to big for my moniter so i tried using xvidtune like i was told to to change it and it said cant open display is there something i need to do to get it to find it ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Dear Sir, I'm required to run a.out binaries like foxplus in a recent Intel based hardware. I have chosen FreeBSD 5.1 and successfuly installed. But I could not run a.out binaries like Foxplus. I tried it by load ibcs modules and aout modules in /boot/kernel directory. My foxplus did not work. I require your suggestions regarding this. I may not use FreeBSD 2.1 version as I require driver for Adaptec 7902 (Ultra Wide SCSI 320). Please help me. Thanks, S.Gopinath Chennai, INDIA ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Recently I've installed the version 5.1 of the FreeBSD. I added a new user with login 'davcav' in the 'wheel' group and also I added this user in the 'operator' group. In the new user login the commands 'shutdown -p now' and 'su' works but when I try to mount the floppy disk with the command 'mount_msdosfs /dev/fd0 /floppy' return the following message mount_msdosfs: /dev/fd0: Operation not permitted Somebody in the web suggest to use the 'su' command for mounting the device and read the data in the '/floppy' directory. Similar instruction are used for unmounting the device. Does exist a way for mounting directly the data from floppy (or CD) from a non-root user (in my case 'davcav' user) ? /Cavallini David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hello again Great Ones, The systems runs muy buen. However when I first built it I used IPv6- just to see. Now additional reading makes me believe I'm just better off with IPv4. What would you recommend as the easiest procedure to teardown current ip and bring up IPv4.My concern is bindings and getting every instance of the files in /usr and root. I'd really appreciate your suggestions. Thanks. __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hey I Decided To Get your Unix Based OS Because I need More of a Challeng I Do Have Two Questions, First Can I install FreeBSD without using Partition magic Second My Floppy A 3 and 1/2 Does Not work can I right the Floppy Image On to an CD rom _ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Recently I've installed the GCC-3.2.3 in the version 5.1. When I run the gcj32 command form the bash shell it return the following error message /usr/libexec/ld-elf.so.1: Shared object libc.so.4 not found Probably a C library is missing but I don't known I do not know which it could be. The installation of the package with the command pkg_add is Ok, no errors messages returns. Cavallini David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
i would like to know how to configure my freebsd software to connect to internet. i have ip, netmask, gateway, dns address. pls let me know as soon as possible ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
pls give me info how to configure my pc for connecting to internet. i've my own ip, gateway and dns address. pls reply as soon as possible... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hi all , i want to know how to enable my sound card from freebsd . ( i am using freeBSD 5.0 and my sound card is yamaha ISA opl3sax) i have tried to load the sound modules . but the mpg123 or eswd daemon says that there is no /dev/dsp please help abhijeet ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi everybody, I run freeBSD 5.0 and tried to update the KDE to KDE 3.1.3. There is a problem saying an include file is missing, see the text below. Anything that I did wron or I can do about that? Many thanks Otto Bernhardi. -- otto# cd /usr/ports/deskutils/kdepim3 otto# cat pkg-descr Personal Information Management tools for KDE. This rather broad scope encompasses mail clients, addressbooks, usenet news, scheduling and even sticky notes. otto# make isnatl make: don't know how to make isnatl. Stop otto# make install === Building for kdepim-3.1.3 gmake all-recursive gmake[1]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3' Making all in calendarsystem gmake[2]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/calendarsystem' gmake[2]: Nothing to be done for `all'. gmake[2]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/calendarsystem' Making all in doc gmake[2]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc' Making all in . gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc' gmake[3]: Nothing to be done for `all-am'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc' Making all in karm gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/karm' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/karm' Making all in kandy gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kandy' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kandy' Making all in kaddressbook gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kaddressbook' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kaddressbook' Making all in kcontrol gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kcontrol' Making all in . gmake[4]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kcontrol' gmake[4]: Nothing to be done for `all-am'. gmake[4]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kcontrol' Making all in kalarmd gmake[4]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kcontrol/kalarmd' gmake[4]: Nothing to be done for `all'. gmake[4]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kcontrol/kalarmd' gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kcontrol' Making all in kalarm gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kalarm' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kalarm' Making all in knotes gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/knotes' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/knotes' Making all in kpilot gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kpilot' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/kpilot' Making all in korganizer gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/korganizer' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc/korganizer' gmake[2]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/doc' Making all in kabc gmake[2]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/kabc' Making all in kabc2mutt gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/kabc/kabc2mutt' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/kabc/kabc2mutt' gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/kabc' gmake[3]: Nothing to be done for `all-am'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/kabc' gmake[2]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/kabc' Making all in karm gmake[2]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/karm' Making all in support gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/karm/support' gmake[3]: Nothing to be done for `all'. gmake[3]: Leaving directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/karm/support' Making all in pics gmake[3]: Entering directory `/usr/ports/deskutils/kdepim3/work/kdepim-3.1.3/karm/pics' gmake[3]: Nothing to be done for `all'. gmake[3]:
[no subject]
mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hello is there a command in the shell that will let me connect to my service provider so i can get on the internet to do things like web search I just dont like having to open up the x window just to get on the net so is there a way of doing it in the shell ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hello i bought an emachine and i chose to put freebsd on it to try it out and when i go to use the x window it goes and shows it to big on my screen so i went to the manufacturers website to get the specs of the system so i can get the display to show correctly like the book said but they wouldnt give out the information so what is there that i can do now to get it to work properly ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Ignoring SIGSEGV (was: no subject line)
On Tuesday, 29 July 2003 at 9:16:29 +, cool46 cool46 wrote: how can ignore SEGV signal on Freebsd? You can't. I am not mean setting SEGV's handler to SIG_IGN,this way can prevent program to exit,but can't restore environment to continue this program,so the program will hang and can't exit for ever. Of course. What do you expect to happen? A SIGSEGV is an indication that the instruction being executed can't complete. Ignoring a signal means going back and continuing with that instruction. You'll get the SIGSEGV again. I see a way in Linux,you can see http://kaizo.us/mirrors/phrack/phrack58/p58-0x03 , This page returns an error message: Not a typewriter (ENOTTY). but this is depend on OS because it is closed to OS' underlying layer and it is not works on Freebsd.Could you give me a example?thanks. There are two things you can do with a SIGSEGV: 1. Stop it from happening. This is preferable. 2. Add a signal handler which performs some alternative function. For example, you might print out some information about the state of the program before terminating. Greg -- When replying to this message, please copy the original recipients. If you don't, I may ignore the reply or reply to the original recipients. For more information, see http://www.lemis.com/questions.html See complete headers for address and phone numbers pgp0.pgp Description: PGP signature
[no subject]
___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi , I'm disperated I've recently installed FreeBSD 4.8 ,and all at the first look was ok , this was only a try in a small partition , and now I have decided to install it in a bigger partition , so I've downloaded the 5.1 ISO (to give it a try too) and I've tried to BURN it with burncd . Now, I've noticed that in the DEV directory there are the devices acd0a and acd0c , I've thought that acd0a was DVD and acd0c was CD-RW... but I was wrong... ACD0 is only the DVD , CD-RW (a Liteon 52x 24x 52x) isn't found at all!! Literally from DMESG: ata0-slave: ATA identify retries excedeed and sometimes it doesn't find my DVD too , with the message : ata1-slave: ATA identify retries excedeed so, I'm without CD and DVD :cry: What I can do?? My system is: Athlon XP 2400+ MSI KT4 Ultra (KT400) MoBo The CDRW and DVD are attached to the two slave of the two ATA channels Help me please , I've tried to remove the DVD in order to try to get CDRW recognised , but it doesn't work anyway Thanks for help Bye Marcello __ Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi.. My name is Per, and I have a problem. I wanna use my p3 2,4 as workstation running under FreeBSD 5.1, but I cant get my videocard working.. The card type is : ATI radeon 9700 TX I was wondering if the 5.1 release do not support it, or if i have done something wrong.. please help!! // Per Nilsson _ Hitta rätt köpare på MSN Köp Sälj http://www.msn.se/koposalj ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I'm trying to configure both a master and slave DNS on the same machine. My approach is to run the master by setting named_enable=YES and it will use the config file in /etc/named. To start the slave I will In rc.local and it would use the config files in /etc/named/slave. Does this seems ok? Is there a better way. This seems to come up every now and then. Before we start, is there any reason you want to have two seperate named process running, instead of having one process serving as master to some domains and slave to others? Like all of my action this is the result of a requirement. I'm required to run two by nametech to register it, They said they can even be on one box. In our configuaration, one machine faces the internet and there is a number of computers behind the firewall which use NAT. I would like to run the slave on a internal box but as the addresses are funky due to NAT. Cheers, Tony -- Kirk Strauser -- next part -- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 188 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/ 20030722/95254982/attachment-0001.bin ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
in which directory in ports i can find windowmaker? __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
- Omar ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Dear sirs, please, help me to solve such problem: during configuration I had made an error in rc.conf (unterminated quoted string). After rebooting kernel was loaded successfully (without remarks), but when reading rc.conf system reports about error and breaks during mounting root. So I have a read-only file system without any possibility to correct rc.conf. Say, whether I must install FreeBSD from the very beginning, or I can repair rc.conf ? Yours, I.A. Kudriavtcev ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I hope I am not asking a NewB question, but I read through dump and cron and see no obvious way to run a nightly dump through cron AND allow user intervention to change the tape. I am running a DDS2 tape drive and trying to backup around 12GB. The tape runs to the end, issues the end of tape, and then dump fails. I would like to be able to change the tape and get a backup. Do I need to use some other software, or am I missing a switch or something somewhere? TIA Bob ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I got some problem whit my ISP. They are trying to prevent us (users) use theres VPN on more then one box. They do that whit looping of packets till they reach TTL = 1 and then come to you, so when I try to NAT my VPN nothing is going to the users behind the VPN box due expire of the packet. I tryed IPSTHEALTH option in the kenrel but it does not help me to solve this problem ... pls give me some advice or point to begin solvieng the problem. Thanks in for ... ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
www.computerking.ca QUALITY and SERVICE first. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Greetings, Is there a way to use cdrecord with an ATAPI cdrom burner? I have enabled the following devices in the kernel but still no luck. # SCSI peripherals device atapicam device scbus # SCSI bus (required) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass# Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) Output of dmesg acd0: CD-RW Hewlett-Packard CD-Writer Plus 9100 at ata1-master PIO4 And I do not really want to use burncd if i could get cdrecord to work. Thanks! -- In the windoze world, I am limited by the tools that I can use, In Unix, I am limited by my own wisdom. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- I have a question about sysinstall. If i have 3 SCSI drives un-RAIDED and one IDE drive how will sysinstall give me an option of which drive to install on. Will there just be 4 unused partitions in the Fdisk partition editor? If so could i install FreeBSD on one of the drives and then RAID them all together with Vinum and expect all the hardrives to share the files (exept the IDE which will be used for something esle) or would i have to reconfigure the mount points? If i were to reinstall FreeBSD what steps would i have to take to make sure the RAID is still there? And also how does RAIDING through Vinum work? And also, are Travan type tape drives compadible with FreeBSD? Thanks in advance. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
I would like to do a mail server. Please uggest a safe, secure way of doint mail via smtp and pop. I don't want to use any sorta webmail. TIA -- Best regards, Chris __ PGP Fingerprint = D976 2575 D0B4 E4B0 45CC AA09 0F93 FF80 C01B C363 PGP Mail encouraged / preferred - keys available on common key servers __ 01010010011101100011011001010111001001011000 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Mail server (was: no subject)
On Fri, Jul 11, 2003 at 09:05:05PM -0500 or thereabouts, Chris wrote: I would like to do a mail server. Please uggest a safe, secure way of doint mail via smtp and pop. I don't want to use any sorta webmail. You have 4 big choices as far as SMTP goes: 1) sendmail. The ubiquitous MTA; included w/FreeBSD; somewhat difficult to configure (though *much* better now than it once was); notoriously insecure (though still quite good), quite reliable. 2) Postfix. In ports; good alternative to Sendmail; probably the second most common MTA; simple to configure; secure but not bulletproof; reliable. 3) Exim. In ports; very similar to Sendmail (though much easier to configure); not as common as the others; secure but not bulletproof; reliable enough (I haven't used it, at least not for very long). 4) qmail. In ports; pretty much bulletproof (the author will give you $500 if you find an eexploitable hole); not much configuration to do; building it is a bit different (but the port helps you there); probably has the best support for the new Maildir format; quite unlike Sendmail in several ways; extremely reliable. My favorites: qmail, then Postfix, then Sendmail, then Exim. (I use qmail currently.) For POP, you could either use qmail-pop3d or qpopper. I'm sure there are others but those are good. (Note that qpopper 2.53 has some security bugs; make sure you use at least 3.0). -- Josh TIA -- Best regards, Chris __ PGP Fingerprint = D976 2575 D0B4 E4B0 45CC AA09 0F93 FF80 C01B C363 PGP Mail encouraged / preferred - keys available on common key servers __ 01010010011101100011011001010111001001011000 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Sorry, but this is probably a rudimentary question to some of you. I've created a list (using mailman) but when I do a python mailmanctl -u start as root I get a Warning! You may encounter permission problems. Site list is missing: mailman and it exits. I've tampered with this program for hours now, trying every possible combination. How do I get this friggin thing up and running?? I'm running FreeBSD 5.1 RELEASE. I'm ready to toss my GODDAMN BOX OUT THE FUCKING WINDOW! To put an end to it, KMAIL won't work,again, so I had to telnet into my port 25 to send this email... go figure ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Chris, It is one of the most common problems with initial setup of the SM. Check this out and find your error there: http://www.squirrelmail.org/wiki/en_US/SolvingProblems Regards, Denis Hello, Has anyone had any trouble with the ports version of SquirrelMail. I updated my mail ports yesterday and built cclient and IMAP-uw without ssl off. I verified this by logging in through telnet: * OK [CAPABILITY IMAP4REV1 LOGIN-REFERRALS AUTH=LOGIN] ed IMAP4rev1 2003.337 at Tue, 8 Jul 2003 11:27:20 -0400 (EDT) 0001 login user password 0001 OK [CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND] User user authenticated 0002 logout * BYE ed IMAP4rev1 server terminating connection 0002 OK LOGOUT completed Connection closed by foreign host. So now that I know IMAP and cclient work I moved on to Squirrelmail. It installed successfully but when I try to login with a user on the system I get: You must be logged in to access this page. I'm stuck on this one and would appreciate any help. I acctually tried the ports version and the latest version off of squirrelmail.org and I get the same thing. Thank You -chris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- I have a question about RAID software. Is there such a thing, and if so is there a ported RAID package that is compadible with SCSI? -Evan ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Dear Mr or Mrs my name is siavash mahjoob. i need VGA driver nvidia riva TNT2 model 64 for freebsd. please guide me how can take it. [EMAIL PROTECTED] - Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Dear list dear mr samuel i used anoncvs2.de.freebsd.org and counterchecked at anoncvs.freebsd.org and the webinterface (http://www.freebsd.org/cgi/cvsweb.cgi/) the procedure i followed was exactly that described in the handbook http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/anoncvs.html Zheyu Shen -- +++ GMX - Mail, Messaging more http://www.gmx.net +++ Jetzt ein- oder umsteigen und USB-Speicheruhr als Prämie sichern! ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- I have a question related to the case on my computer. I have a Aspire X-Sonic shown at the link below. I was wondering if it would be possible to replace all the 5.25 CD-ROM size plastic pieces with one piece that would conceal all the drives behind it. The piece would be openable and all the drives would be behind it, almost like putting in a CD-ROM drive and leaving the plastic piece on, except i would be putting in all the drives and leaving one big plastic piece on. Another picture is also at the second link of a Dell PC with somewhat of what i am looking for. So the front would look relatively the same but the drives that are there in the picture would be replaced with some type of a door like mechanism. I would do this for the Floppy slots too, providing that it is possible. Do the make drive doors like that, or would it be a custom job. If it does have to be a custom job, how do you reccommend going about it? E-mail me back. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
_ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
test _ Help STOP SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- If i buy a UATA133 Bare Hard Drive, do i have to buy a disk controller. If i have to and i buy a PCI one does in connect to the hard drive via jumpers or does the mother board just connect it to the hard drive. Also is there any compadibility issues with certain hard drives as far as SCSI and IDE go, like which type of disk controller you have to use. And if i have to buy one which protocol do you reccommend, and what is a good compadible controller for FreeBSD?E-mail me back ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
hello i just installed freebsd and i installed all the packages and everything but when i hit startx in the terminal it wont log me into the graphical interface what could be wrong and how can i fix it ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Joe, Check the blackbox out - compiles fast and loads within 5-7 seconds :-) /usr/ports/x11-wm/blackbox. You will like how easy it is to configure menus there. KDE is indeed an overbloated application. From binaries, it takes 10-15 minutes to install KDE. Regards, Denis Message: 10 Date: Sat, 28 Jun 2003 10:23:48 -0800 From: Joe Pokupec [EMAIL PROTECTED] Subject: 11 Hour Installs on KDE? To: Free BSD List [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=US-ASCII Hi All, I installed 5.1 on 2 separate machines yesterday. After the general install (which included all the Ports), I went to /usr/ports/x11/kde3 and did a: make install clean after reading tfm. The install has been going for over 11 hours now. It's not hung up, the text is scrolling by... On both machines... Is there something I should know? Joe ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
Hi, all Maybe a simple question for somebody who knows the answer, this counts for for all questions; Thinking about using a Hauppauge WinTV PCI TV card to capture (Hi Quality) images to store locally and to publish (Cron?) over FTP as a WebCam function. Is there a simple command line program to capture and save a image as JPG or GIF ? All programs mentioned are for use under X11. Kind regards, Zeo Smeijsters. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
dear : team freebsd i have some questions 1 . i want help on freebsd 2 . how i make cd bootable from freebsd 3. what files i put on the cd to boot it _ Protect your PC - get McAfee.com VirusScan Online http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: general help (was no subject)
mohamed awad wrote: dear : team freebsd i have some questions 1 . i want help on freebsd http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html If you come across a _specific_ problem/question, ask on this list. 2 . how i make cd bootable from freebsd 3. what files i put on the cd to boot it Grab an ISO image and burn it _as_an_image_ ... see the docs for your burning software on how to do this (each software is different). http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors.html Also read the installation docs in the handbook (link above) on other methods of installing. If English is not your primary language, check here to see if the docs have been translated for you: http://www.freebsd.org/support.html#web -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- I downloaded a .zip version of an SSH-Telnet client called PuTTy off the internet. I have unziped it to another dir on /home, but when i try to open the actual client called putty.exe it gives me a message like Can't find program putty.exe What does this mean and how do i fix it? E-mail me back. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
forgot my login and password. what do I do to bypass the login. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- What ports do i need to open in my firewall to run SSH? E-mail me back ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
FreeBSD- I have a Firewall and i want to open port 22 for SSH for two different IP adresses and it won't let me do this. I need these two computers to be SSH clients but i don't know how to make it work with the Firewall. Also where can i get a non-zip version of PuTTy for FreeBSD. Email me back ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: SSH/firewall problems (was: no subject)
Please add a decent subject line to your posts: http://www.lemis.com/questions.html [EMAIL PROTECTED] wrote: FreeBSD- I have a Firewall and i want to open port 22 for SSH for two different IP adresses and it won't let me do this. We're going to need more detail on exactly how you're doing this. Send detailed information on the IP addresses you want to allow access, as well as what firewall program you're using (IPFW? ipf?) and your current firewall rules. The short answer, however, is that you open port 22 for the IPs that you want to allow access. Before you do this, however, turn _OFF_ the firewall and make sure you can access via ssh. If not, then the firewall has nothing to do with your problem. I need these two computers to be SSH clients but i don't know how to make it work with the Firewall. It depends on which firewall you're using. Please send specifics. Also where can i get a non-zip version of PuTTy for FreeBSD. There is no such thing. FreeBSD ships with an ssh client (called ssh) You don't need PuTTY. PuTTY was developed for Windows. -- Bill Moran Potential Technologies http://www.potentialtech.com ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
[no subject]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, I currently have an APC Smart-UPS 1000, It is connected to my win2k machine using a serial cable and using power chute I can have the computer shutdown when the battery gets low. There are 3 computers connected to it, my FreeBSD server, my gentoo workstation, and my windows 2000 workstation. What I'd really like to do is find a way to run a daemon the server that will shutdown my windows and gentoo machines after it goes X number of minutes into ups mode. Anyone know any software of the like? Thanks, Gordon Keesler [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Note: This signature can be verified at https://www.hushtools.com/verify Version: Hush 2.3 wkYEARECAAYFAj7s1oIACgkQaic4XJRNfdWuLgCeK8Z/skv3/te5MZa6B8U5GwyXdjYA oIAeWWlj9rWLE7Mn5Tl1Yy+GXR2K =Zupz -END PGP SIGNATURE- Concerned about your privacy? Follow this link to get FREE encrypted email: https://www.hushmail.com/?l=2 Free, ultra-private instant messaging with Hush Messenger https://www.hushmail.com/services.php?subloc=messengerl=434 Big $$$ to be made with the HushMail Affiliate Program: https://www.hushmail.com/about.php?subloc=affiliatel=427 ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
(no subject)
Hello im trying to download a copy of unix from the site. i have got to: 2.13.1 Creating an installation CDROM As part of each release, the FreeBSD project makes available five CDROM images (``ISO images''). These images can be written (``burned'') to CDs if you have a CD writer, and then used to install FreeBSD. If you have a CD writer, and bandwidth is cheap, then this is the easiest way to install FreeBSD. Download the correct ISO images The ISO images for each release can be downloaded from ftp://ftp.FreeBSD.org/pub/FreeBSD/ISO-IMAGES-arch/version or the closest mirror. Substitute arch and version as appropriate. That directory will normally contain the following images: Table 2-6. FreeBSD ISO image names and meanings Filename Contains version-mini.iso Everything you need to install FreeBSD. version-disc1.iso Everything you need to install FreeBSD, and as many additionalthird party packages as would fit on the disc. version-disc2.iso A ``live filesystem'', which is used in conjunction with the ``Repair'' facility in sysinstall. A copy of the FreeBSD CVS tree. As many additional third party packages as would fit on the disc. version-disc3.iso As many additional third party packages as would fit on the disc. version-disc4.iso As many additional third party packages as would fit on the disc. i wud like to dl version-disc1.iso but i odnt now which bit to use as a substitue for arch or version in the url. could you help? thankyou ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: (no subject)
On Sunday 15 June 2003 05:39 pm, [EMAIL PROTECTED] wrote: Hello im trying to download a copy of unix from the site. i have got to: 2.13.1 Creating an installation CDROM As part of each release, the FreeBSD project makes available five CDROM images (``ISO images''). These images can be written (``burned'') to CDs if you have a CD writer, and then used to install FreeBSD. If you have a CD writer, and bandwidth is cheap, then this is the easiest way to install FreeBSD. Download the correct ISO images The ISO images for each release can be downloaded from ftp://ftp.FreeBSD.org/pub/FreeBSD/ISO-IMAGES-arch/version or the closest mirror. Substitute arch and version as appropriate. That directory will normally contain the following images: Table 2-6. FreeBSD ISO image names and meanings Filename Contains version-mini.iso Everything you need to install FreeBSD. version-disc1.iso Everything you need to install FreeBSD, and as many additionalthird party packages as would fit on the disc. version-disc2.iso A ``live filesystem'', which is used in conjunction with the ``Repair'' facility in sysinstall. A copy of the FreeBSD CVS tree. As many additional third party packages as would fit on the disc. version-disc3.iso As many additional third party packages as would fit on the disc. version-disc4.iso As many additional third party packages as would fit on the disc. i wud like to dl version-disc1.iso but i odnt now which bit to use as a substitue for arch or version in the url. You are the only one that can do the chosing. You know whether you have a i386 (Intel or AMD), alpha, or etc. See ftp://ftp.FreeBSD.org/pub/FreeBSD/ISO-IMAGES-i386 Since you have problems at this point, it is probably safe to suggest that you deal with only the 4.x version. For starters, you only need to download the first iso. When you burn it onto a CD-ROM, you have to use the burn as an image option. All CD burners will do this. It is just difficult on some of them to find out how. Most of the ones I am familiar with will put you into the right spot if you double click the iso from a file manger. Kent could you help? thankyou ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
