Re: Can a SLIP be set based on a message text?
Sorry, I should have read closer. You would need automation to trap on message ID, parse the text, and take whatever actions you wanted. _ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jousma, David Sent: Friday, June 15, 2018 3:00 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Can a SLIP be set based on a message text? **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.ieag100/slipxmp.htm You can check out the MSGID parameter, but it appears to only work in response to a command, vs trap on a random message. Probably better off using your automation package to do that, and have it do a console dump. _ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Bill Ashton Sent: Friday, June 15, 2018 2:41 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Can a SLIP be set based on a message text? **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Hello, I am having some difficulty in troubleshooting an application problem dealing with a started task, and want to create a dump of the application job and the STC at a particular point of time. Can someone tell me if I can set a SLIP to create an SVCD when my job encounters a message that is produced in the JES joblog? For the sake of the discussion here: Applic. job = MYTESJOB STC used = DATABAS2 Message = "USERM001: JOB ENCOUNTERED UNMANAGED ERROR - ABENDING" If I can do this, I want to dump several areas for the job and the STC (I know how to code that part with the SDATA values. I suspect it is something like this: SL SET,ENABLE,J=MYTESJOB,JL=(MYTESJOB,DATABAS2),ACTION=SVCD,MATCHLIM=1,SDATA=(),??? I just need to know what to replace ??? with for tripping this as soon as the message is produced. Thanks for your help! Billy -- Thank you and best regards, *Billy Ashton* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Can a SLIP be set based on a message text?
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.ieag100/slipxmp.htm You can check out the MSGID parameter, but it appears to only work in response to a command, vs trap on a random message. Probably better off using your automation package to do that, and have it do a console dump. _ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Bill Ashton Sent: Friday, June 15, 2018 2:41 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Can a SLIP be set based on a message text? **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Hello, I am having some difficulty in troubleshooting an application problem dealing with a started task, and want to create a dump of the application job and the STC at a particular point of time. Can someone tell me if I can set a SLIP to create an SVCD when my job encounters a message that is produced in the JES joblog? For the sake of the discussion here: Applic. job = MYTESJOB STC used = DATABAS2 Message = "USERM001: JOB ENCOUNTERED UNMANAGED ERROR - ABENDING" If I can do this, I want to dump several areas for the job and the STC (I know how to code that part with the SDATA values. I suspect it is something like this: SL SET,ENABLE,J=MYTESJOB,JL=(MYTESJOB,DATABAS2),ACTION=SVCD,MATCHLIM=1,SDATA=(),??? I just need to know what to replace ??? with for tripping this as soon as the message is produced. Thanks for your help! Billy -- Thank you and best regards, *Billy Ashton* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Can a SLIP be set based on a message text?
Hello, I am having some difficulty in troubleshooting an application problem dealing with a started task, and want to create a dump of the application job and the STC at a particular point of time. Can someone tell me if I can set a SLIP to create an SVCD when my job encounters a message that is produced in the JES joblog? For the sake of the discussion here: Applic. job = MYTESJOB STC used = DATABAS2 Message = "USERM001: JOB ENCOUNTERED UNMANAGED ERROR - ABENDING" If I can do this, I want to dump several areas for the job and the STC (I know how to code that part with the SDATA values. I suspect it is something like this: SL SET,ENABLE,J=MYTESJOB,JL=(MYTESJOB,DATABAS2),ACTION=SVCD,MATCHLIM=1,SDATA=(),??? I just need to know what to replace ??? with for tripping this as soon as the message is produced. Thanks for your help! Billy -- Thank you and best regards, *Billy Ashton* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Would SHARE kindly kick IBM in the ass for what the've done with their web content?
IMHO, IBM should be very cautious about using noindex and robots.txt; there are legitimate reasons to search for old manuals. -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List on behalf of Kirk Wolf Sent: Thursday, June 14, 2018 4:01 PM To: IBM-MAIN@listserv.ua.edu Subject: Re: Would SHARE kindly kick IBM in the ass for what the've done with their web content? This may have been said before, but if IBM wanted to remove stuff, the appropriate way is to: 1) use robots.txt or equivalent to exclude the to-be-deleted documents from search indexes 2) wait some period of time for crawlers to re-index 3) Remove the pages Google in particular I believe has some tools that you can use to pro-actively remove pages from their indexes. If they aren't bring these pages back, then this is what they should do to clean up the mess that they have made. Dealing with search indexes is something that professional web site publishers should know how to do. Kirk Wolf Dovetailed Technologies http://secure-web.cisco.com/1k7juFj0i6xddswkmI_nEVdWuZc0OR6cgXJv1oKj32Zlqy1FVfRQVU-R1YkVedK6r71H00sd3Q7YKGwnGsogG6oASFz3bjIEkCNMSNJdt5SRdprjUSjPbJSSFiXMmSY8KS_jFvNy22z1kHhaHfIguCItILsxosVz1qNqefKApWeOvkhyv03t8aldu8B0_B89VaLkcU4t17A98ZpfOswahhEj0mBxftpRqUkB7K7DtrBuDK5IA94XG7nPM8-DVCNZv6IUdhpInQ2_syNwhYWg5ecGSV4mw-cnsREQln3TfqzdIxylFKti2SoSG28mu8MshiHNRNgupptl3saqWnPso_BC3uCga9NFglwaWG4WAJxNFHMixfkEA3aHB3OrdVcDI_3TWR88OHXZGyXzn0Oggudd69OLDWWtqMEME4sKjp_acvoQzABM6raXnXXQeAVtd/http%3A%2F%2Fdovetail.com On Thu, Jun 14, 2018 at 12:33 PM, Ed Jaffe wrote: > On 6/14/2018 9:27 AM, Mike Schwab wrote: > >> Even if you have a z/OS 2.1 manual, some PTFs do add features or >> command or document changes to older versions, and they only update >> the newest manual. Sometimes it is best to get the newer manual then >> check the document changes so you aren't referencing a feature only in >> the newest release. >> > > No argument there, but saying that provides no rationale or justification > for removal of the z/OS 2.1 KC content which is what this thread is about... > > > -- > Phoenix Software International > Edward E. Jaffe > 831 Parkview Drive North > El Segundo, CA 90245 > http://secure-web.cisco.com/1jiowD_91V14FjGKAez-b6driaIyDxNkfuJJLfLMO0h6wiKo0hj4dBV2ZzkPMu6A8A9UnbSjPqUGkDYa9MJ4nYpJh9cAxUQC1UTS41g9wNJBIPdnSG9xgruJAeRc-vBnDO_sjGigLGvGieBzhTTKhPe6du34_24TNZHvZYrztMJkZtuJIiAuznVzs0sX4ePUKmsGFi6BL9tWUH86PkO-CEFgoKe-_IGgYRkNcawD4180eUP2zNVWr0p6Sq9-rKB9urD1ChPsc1u0UKnIq4tJRVzzAqg0p6K5sAeh1E0g9_sZdZGoWMA2gEDNI7_l-k7mQN9VMSFXXW9LlhOsR2puKl-B-5FrwFTyKXmYIyqygz6wTxb_vioYSWU_YT4DBjnCFFfbvkUrrG-fbbDMpB54BqSeukFguXCGplqsHteH5AH3UvDjWVVGv2afcMlrax3SR/http%3A%2F%2Fwww.phoenixsoftware.com%2F > > > This e-mail message, including any attachments, appended messages and the > information contained therein, is for the sole use of the intended > recipient(s). If you are not an intended recipient or have otherwise > received this email message in error, any use, dissemination, distribution, > review, storage or copying of this e-mail message and the information > contained therein is strictly prohibited. If you are not an intended > recipient, please contact the sender by reply e-mail and destroy all copies > of this email message and do not otherwise utilize or retain this email > message or any or all of the information contained therein. Although this > email message and any attachments or appended messages are believed to be > free of any virus or other defect that might affect any computer system > into > which it is received and opened, it is the responsibility of the recipient > to ensure that it is virus free and no responsibility is accepted by the > sender for any loss or damage arising in any way from its opening or use. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS V2R1 content in KC (and Google)
Could IBM have put a noindex in there? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List on behalf of Ambros, Thomas <010f77c934b1-dmarc-requ...@listserv.ua.edu> Sent: Friday, June 15, 2018 6:54 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: z/OS V2R1 content in KC (and Google) It's almost as if Google hasn't crawled the 2.2 and 2.3 Knowledge Center content, because the material is certainly there but it doesn't appear in the results - at least not in the first pages presented before, for example, I start getting license plate results when I'm looking for a message id. Not letting IBM off the hook on this one, clearly nobody had any perspective on the user experience, but I'm also pondering why we don't get results for the other current content. Is this the kind of thing where somebody could prompt Google to update their index? I tried adding the release notation to searches and no dice, Google stubbornly presents 2.1 results when I add 2.2 or 2.3 to the search argument. Thomas Ambros zEnterprise Operating Systems zEnterprise Systems Management 518-436-6433 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Peter Hunkeler Sent: Friday, June 15, 2018 03:31 To: IBM-MAIN@LISTSERV.UA.EDU Subject: AW: z/OS V2R1 content in KC (and Google) Sue,thank you for correcting the inexcusable error so quickly. It was, however, unnecessary to post what may look as reasonable justification to you. To me "improve customer experience" is always announcing a step back in service, usability, availability. It's the current management buzzword to justify whatever nonsense they impose on us. --Peter Hunkeler -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information. 127 Public Square, Cleveland, OH 44114 If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:dnereque...@key.com with 'No Promotional E-mails' in the SUBJECT line. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Would SHARE kindly kick IBM in the ass for what the've done with their web content?
Isn't there provision for anchors in the current version of PDF? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 From: IBM Mainframe Discussion List on behalf of Jerry Callen Sent: Friday, June 15, 2018 8:29 AM To: IBM-MAIN@listserv.ua.edu Subject: Re: Would SHARE kindly kick IBM in the ass for what the've done with their web content? On Thu, 14 Jun 2018 11:27:47 -0500, Mike Schwab wrote: >Even if you have a z/OS 2.1 manual, some PTFs do add features or >command or document changes to older versions, and they only update >the newest manual. Sometimes it is best to get the newer manual then >check the document changes so you aren't referencing a feature only in >the newest release. OK, here's a constructive proposal: there should be a single HTML-based web tree that contains the doc for the MOST CURRENT VERSION of z/OS. Each page would then have a menu dropdown to allow you to select an earlier release. The URLs for the current pages would be kept STABLE, so that links from other pages won't go dead when future releases come out. The web designers would use robots.txt or whatever to keep crawlers out of the back level doc, so that only the most current doc is indexed. The when you search for "IDCAMS REPRO", you get the hits to the LATEST doc, but can find the back-level stuff easily enough. I agree that the PDFs are valuable (I use them all the time), but it's ALSO really handy to be able to embed a link to the EXACT SPOT n the documentation that I am referring to, and that requires a URL to a page, not to a PTF. -- Jerry -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OSA/SF HCD question
W dniu 2018-06-15 o 15:33, Mike Wawiorko pisze: OSA/SF doesn't work with the newer OSA and mainframe hardware. Can't remember if it stopped with OSA-E4 or OSA-E5. These functions moved from OSA/SF to the hardware console instead. Around the same time the z/OS D TCPIP,,OSAINFO command was introduced to replace (most of) the OSA/SF display functions. It was OSA-Express4s. The last OSA which works with OSA/SF and the first OSA which works with HMC substitute for OSA/SF. -- Radoslaw Skorupka Lodz, Poland == -- Treść tej wiadomości może zawierać informacje prawnie chronione Banku przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne działanie o podobnym charakterze jest prawnie zabronione i może być karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorized to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2018 r. kapitał zakładowy mBanku S.A. (w całości wpłacony) wynosi 169.248.488 złotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
KC - once again
Is IBM trying to reduce the usefulness of the KC? I just searched for the z14 HMC doc with Google and the top link resulted in this message. Seems the content in the KC is being reduced. Is IBM trying to reduce their DASD footprint. Is AWS charging too much for it :) Documentation for z14, HMC V2.14.0, and SE V2.14.0 is no longer available in the IBM Knowledge Center. You can find information on the console help system, or on Resource Link. -- Lionel B. Dyck (Contractor) < Mainframe Systems Programmer - RavenTek Solution Partners -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OSA/SF HCD question
OSA/SF doesn't work with the newer OSA and mainframe hardware. Can't remember if it stopped with OSA-E4 or OSA-E5. These functions moved from OSA/SF to the hardware console instead. Around the same time the z/OS D TCPIP,,OSAINFO command was introduced to replace (most of) the OSA/SF display functions. Mike Wawiorko -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of R.S. Sent: 15 June 2018 12:24 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: OSA/SF HCD question This mail originated from outside our organisation - r.skoru...@bremultibank.com.pl W dniu 2018-06-15 o 11:05, Sankaranarayanan, Vignesh pisze: > Hello All, > > In a 2 port per CHPID card (4 ports in a card), to use OSA/SF, is 1 OSAD unit > required per port (for a total of 4), or is 1 OSAD unit enough per CHPID/PCH > (for a total of 2). You need 1 OSAD per CHPID, in other words 1 OSAD per two ports. Caution: you wrote about 2 CHPID per card. It is NOT true for many years, that means OSA-Express6s, 5s and 4s have 1 CHPID per card. The last card with two CHPIDs per card was OSA-Express3, the long one, for older I/O Cage or I/O Drawer. It was standard feature of z196, newer machines could use it as Carry Forward only. -- Radoslaw Skorupka Lodz, Poland This e-mail and any attachments are confidential and intended solely for the addressee and may also be privileged or exempt from disclosure under applicable law. If you are not the addressee, or have received this e-mail in error, please notify the sender immediately, delete it from your system and do not copy, disclose or otherwise act upon any part of this e-mail or its attachments. Internet communications are not guaranteed to be secure or virus-free. The Barclays Group does not accept responsibility for any loss arising from unauthorised access to, or interference with, any Internet communications by any third party, or from the transmission of any viruses. Replies to this e-mail may be monitored by the Barclays Group for operational or business reasons. Any opinion or other information in this e-mail or its attachments that does not relate to the business of the Barclays Group is personal to the sender and is not given or endorsed by the Barclays Group. Barclays Services Limited provides support and administrative services across Barclays group. Barclays Services Limited is an appointed representative of Barclays Bank UK plc, Barclays Bank plc and Clydesdale Financial Services Limited. Barclays Bank UK plc and Barclays Bank plc are authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority. Clydesdale Financial Services Limited is authorised and regulated by the Financial Conduct Authority. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: [EXTERNAL] Re: OSA/SF HCD question
Thanks Radoslaw, that's all I needed to know (to fill this gap in my understanding of OSD setup). – Vignesh Mainframe Infrastructure -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of R.S. Sent: 15 June 2018 12:24 To: IBM-MAIN@LISTSERV.UA.EDU Subject: [EXTERNAL] Re: OSA/SF HCD question W dniu 2018-06-15 o 11:05, Sankaranarayanan, Vignesh pisze: > Hello All, > > In a 2 port per CHPID card (4 ports in a card), to use OSA/SF, is 1 OSAD unit > required per port (for a total of 4), or is 1 OSAD unit enough per CHPID/PCH > (for a total of 2). You need 1 OSAD per CHPID, in other words 1 OSAD per two ports. Caution: you wrote about 2 CHPID per card. It is NOT true for many years, that means OSA-Express6s, 5s and 4s have 1 CHPID per card. The last card with two CHPIDs per card was OSA-Express3, the long one, for older I/O Cage or I/O Drawer. It was standard feature of z196, newer machines could use it as Carry Forward only. -- Radoslaw Skorupka Lodz, Poland == -- Treść tej wiadomości może zawierać informacje prawnie chronione Banku przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne działanie o podobnym charakterze jest prawnie zabronione i może być karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorized to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2018 r. kapitał zakładowy mBanku S.A. (w całości wpłacony) wynosi 169.248.488 złotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN MARKSANDSPENCER.COM Unless otherwise stated above: Marks and Spencer plc Registered Office: Waterside House 35 North Wharf Road London W2 1NW Registered No. 214436 in England and Wales. Telephone (020) 7935 4422 Facsimile (020) 7487 2670 www.marksandspencer.com Please note that electronic mail may be monitored. This e-mail is confidential. If you received it by mistake, please let us know and then delete it from your system; you should not copy, disclose, or distribute its contents to anyone nor act in reliance on this e-mail, as this is prohibited and may be unlawful. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Would SHARE kindly kick IBM in the ass for what the've done with their web content?
On Thu, 14 Jun 2018 11:27:47 -0500, Mike Schwab wrote: >Even if you have a z/OS 2.1 manual, some PTFs do add features or >command or document changes to older versions, and they only update >the newest manual. Sometimes it is best to get the newer manual then >check the document changes so you aren't referencing a feature only in >the newest release. OK, here's a constructive proposal: there should be a single HTML-based web tree that contains the doc for the MOST CURRENT VERSION of z/OS. Each page would then have a menu dropdown to allow you to select an earlier release. The URLs for the current pages would be kept STABLE, so that links from other pages won't go dead when future releases come out. The web designers would use robots.txt or whatever to keep crawlers out of the back level doc, so that only the most current doc is indexed. The when you search for "IDCAMS REPRO", you get the hits to the LATEST doc, but can find the back-level stuff easily enough. I agree that the PDFs are valuable (I use them all the time), but it's ALSO really handy to be able to embed a link to the EXACT SPOT n the documentation that I am referring to, and that requires a URL to a page, not to a PTF. -- Jerry -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS V2R1 content in KC (and Google)
There is a technology, which is very old, named URL rewrite. It basically allows to receive a http request for: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.ieaa700/GETMAIN_Execute_form.htm and process it as: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.3.0/com.ibm.zos.v2r3.ieaa700/GETMAIN_Execute_form.htm In the web server configuration you could use variables for the rewrite. One could ask, why IBM does not use this technology? Its probably OLD IT style?! Furthermore, for future IBM could replace fixed version numbers in the URL as something fixed and let google index an URL like this: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_recent/com.ibm.zos.recent.ieaa700/GETMAIN_Execute_form.htm And use URL rewrite to replace the recent with the appropriate values, so lets say for the next couple of releases - until KC is "improved" again and new link structures are used - the URLs remain unchanged. ?! Denis. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: OSA/SF HCD question
W dniu 2018-06-15 o 11:05, Sankaranarayanan, Vignesh pisze: Hello All, In a 2 port per CHPID card (4 ports in a card), to use OSA/SF, is 1 OSAD unit required per port (for a total of 4), or is 1 OSAD unit enough per CHPID/PCH (for a total of 2). You need 1 OSAD per CHPID, in other words 1 OSAD per two ports. Caution: you wrote about 2 CHPID per card. It is NOT true for many years, that means OSA-Express6s, 5s and 4s have 1 CHPID per card. The last card with two CHPIDs per card was OSA-Express3, the long one, for older I/O Cage or I/O Drawer. It was standard feature of z196, newer machines could use it as Carry Forward only. -- Radoslaw Skorupka Lodz, Poland == -- Treść tej wiadomości może zawierać informacje prawnie chronione Banku przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne działanie o podobnym charakterze jest prawnie zabronione i może być karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorized to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2018 r. kapitał zakładowy mBanku S.A. (w całości wpłacony) wynosi 169.248.488 złotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS V2R1 content in KC (and Google)
It's almost as if Google hasn't crawled the 2.2 and 2.3 Knowledge Center content, because the material is certainly there but it doesn't appear in the results - at least not in the first pages presented before, for example, I start getting license plate results when I'm looking for a message id. Not letting IBM off the hook on this one, clearly nobody had any perspective on the user experience, but I'm also pondering why we don't get results for the other current content. Is this the kind of thing where somebody could prompt Google to update their index? I tried adding the release notation to searches and no dice, Google stubbornly presents 2.1 results when I add 2.2 or 2.3 to the search argument. Thomas Ambros zEnterprise Operating Systems zEnterprise Systems Management 518-436-6433 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Peter Hunkeler Sent: Friday, June 15, 2018 03:31 To: IBM-MAIN@LISTSERV.UA.EDU Subject: AW: z/OS V2R1 content in KC (and Google) Sue,thank you for correcting the inexcusable error so quickly. It was, however, unnecessary to post what may look as reasonable justification to you. To me "improve customer experience" is always announcing a step back in service, usability, availability. It's the current management buzzword to justify whatever nonsense they impose on us. --Peter Hunkeler -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN This communication may contain privileged and/or confidential information. It is intended solely for the use of the addressee. If you are not the intended recipient, you are strictly prohibited from disclosing, copying, distributing or using any of this information. If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose such information for any purpose other than to provide the services for which you are receiving the information. 127 Public Square, Cleveland, OH 44114 If you prefer not to receive future e-mail offers for products or services from Key send an e-mail to mailto:dnereque...@key.com with 'No Promotional E-mails' in the SUBJECT line. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
OSA/SF HCD question
Hello All, In a 2 port per CHPID card (4 ports in a card), to use OSA/SF, is 1 OSAD unit required per port (for a total of 4), or is 1 OSAD unit enough per CHPID/PCH (for a total of 2). Thanks in advance – Vignesh Mainframe Infrastructure MARKSANDSPENCER.COM Unless otherwise stated above: Marks and Spencer plc Registered Office: Waterside House 35 North Wharf Road London W2 1NW Registered No. 214436 in England and Wales. Telephone (020) 7935 4422 Facsimile (020) 7487 2670 www.marksandspencer.com Please note that electronic mail may be monitored. This e-mail is confidential. If you received it by mistake, please let us know and then delete it from your system; you should not copy, disclose, or distribute its contents to anyone nor act in reliance on this e-mail, as this is prohibited and may be unlawful. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
AW: z/OS V2R1 content in KC (and Google)
Sue,thank you for correcting the inexcusable error so quickly. It was, however, unnecessary to post what may look as reasonable justification to you. To me "improve customer experience" is always announcing a step back in service, usability, availability. It's the current management buzzword to justify whatever nonsense they impose on us. --Peter Hunkeler -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
