date:20180916

Re: [LegacyUG] Overlapping Print

2018-09-16 Thread Brian Kelly

Contact support, from your description it sounds like one of the report 
settings you use is triggering a bug that should be addressed.


Support will need a copy of the report settings file with your 
particular settings so they can test your problem. Each report has its 
own settings file so they will need to know which report you are using 
as well.


Brian Kelly

On 16-Sep-18 1:44 PM, Rita McKale wrote:
I have tried the reset button and that sets it back to the default 
settings….and when I run the report that way it is fine, but then I 
go back and the set the report options the way I would like it print and 
again I have overlapping print.  What else do I  need to do?


Thanks,

Rita

*From:*LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] 
*On Behalf Of *Michele Lewis

*Sent:* Tuesday, July 03, 2018 5:11 PM
*To:* Legacy User Group 
*Subject:* Re: [LegacyUG] Overlapping Print

  Open the report and then click the reset button in the lower 
right-hand corner. After you do that, go back to the report options and 
make sure that the check marks haven’t checked themselves back. Now run 
your report


On Tue, Jul 3, 2018 at 17:00 Rita Lynn McKale > wrote:


Ok, I unchecked the FindAGrave ID and that removed the numbers………But
now the bottom of page 1 is overlapping onto the top of page 2.

I did check/repair and have rebooted my computer but it is still
overlapping.

Rita


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Chart stuck on taskbar

2018-09-16 Thread Bernard Kertesz

I have contacted support as well. I've generally been using charts saved 
as jpegs for working documents and this attempt at saving a chart was 
only because the taskbar lockup gave this as my only option. Since it 
won't maximise, I can't do any manipulation to the chart features much 
less save it as a jpeg or pdf. The database appears to be fine, only 
charting is inaccessible.



On 17/09/2018 1:22 PM, Cathy Pinner wrote:

Contact Support.

I always start Charting from within Legacy.

It sounds as if you are trying to open an existing chart? Do you still 
have the database it was based on in the same place?


Cathy

Bernard Kertesz wrote:


Hope someone can help with this irritating glitch that's just started
with Legacy 9 charting on Windows 10 (both have current updates).

When I click on Legacy Charting, the charting app appears on the task
bar and hovering shows that a chart is there but it won't maximise.
Right clicking on the image gives only 2 viable options, minimise or
close. If I click minimise I can then get the Restore option which
then does absolutely nothing at all.  Closing prompts the save dialog
box but if I say save and then go to the Legacy Charts folder and
attempt to open the .lwcx file (which generally says that it's about 6
or 7Mb) it won't open. If I go to Task View it shows up, tantalisingly.

S annoying.

Thanks, Bernard.


 
	Virus-free. www.avg.com 
 



<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Chart stuck on taskbar

2018-09-16 Thread Cathy Pinner


Contact Support.

I always start Charting from within Legacy.

It sounds as if you are trying to open an existing chart? Do you still 
have the database it was based on in the same place?


Cathy

Bernard Kertesz wrote:


Hope someone can help with this irritating glitch that's just started
with Legacy 9 charting on Windows 10 (both have current updates).

When I click on Legacy Charting, the charting app appears on the task
bar and hovering shows that a chart is there but it won't maximise.
Right clicking on the image gives only 2 viable options, minimise or
close. If I click minimise I can then get the Restore option which
then does absolutely nothing at all.  Closing prompts the save dialog
box but if I say save and then go to the Legacy Charts folder and
attempt to open the .lwcx file (which generally says that it's about 6
or 7Mb) it won't open. If I go to Task View it shows up, tantalisingly.

S annoying.

Thanks, Bernard.

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Chart stuck on taskbar

2018-09-16 Thread Bernard Kertesz

Hope someone can help with this irritating glitch that's just started 
with Legacy 9 charting on Windows 10 (both have current updates).


When I click on Legacy Charting, the charting app appears on the task 
bar and hovering shows that a chart is there but it won't maximise. 
Right clicking on the image gives only 2 viable options, minimise or 
close. If I click minimise I can then get the Restore option which then 
does absolutely nothing at all.  Closing prompts the save dialog box but 
if I say save and then go to the Legacy Charts folder and attempt to 
open the .lwcx file (which generally says that it's about 6 or 7Mb) it 
won't open. If I go to Task View it shows up, tantalisingly.


S annoying.

Thanks, Bernard.


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread David Turley

Maybe, just maybe, the programmers are busy re-writing Legacy in Unicode.
Well, we can dream, can't we?

On Sun, Sep 16, 2018 at 7:35 PM Gene Hutson  wrote:

> We seem to still get the lip service, “the programmers won’t go for that”
>
> or “we have found this problem also, you will get the credit for finding
> it”
>
> but never seems to go anywhere. Who was this designed for in the first
>
> place, us, the users… or the programmers??
>
>
>
> Sent from Mail  for
> Windows 10
>
>
>
> *From: *CE WOOD 
> *Sent: *Sunday, September 16, 2018 8:26 PM
> *To: *Legacy User Group 
> *Subject: *Re: [LegacyUG] Programmers?
>
>
>
> Since it nothing ever happens, people have stopped trying, which is
> probably what they wanted to have happen anyway.
>
>
>
>
>
> CE
>
> *From:* LegacyUserGroup  on
> behalf of Cathy Pinner 
> *Sent:* Sunday, September 16, 2018 5:30 PM
> *To:* Legacy User Group
> *Subject:* Re: [LegacyUG] Programmers?
>
>
>
> We'd all like our pet bugs fixed. I know I have a few.
>
> However, the programmers are not doing nothing.
> Current GR release is no 226. Current beta release is 253. Each release
> has numbers of fixes to test.
>
> If you have particular problems in mind, you need to contact Support or
> send them in so they get entered or updated in the bug tracking, not
> report here where they mostly go nowhere.
>
> Cathy
>
> Ronald E Howell via LegacyUserGroup wrote on 17/09/2018 5:15 AM:
> >
> > On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  > > wrote:
> >
> > I am beginning to think that the programmers of Lagacy all quit
> > when the company sold, or they have gone to sleep.
> >
> > The simplest of fixes has not been done and there is no sign of
> > any real changes or updates to the code.
> >
> > For example how hard is it to make a field unique entry.  The FAG
> > number should be unique and yet  this program keeps erasing the
> > number when its duplicated, not when its entered where it would be
> > noticed but only after a cleanup.
> >
> > Rule #1 "do not destroy customer data"
> >
> > Yep, I just got angry,  sorry.
> >
> > Ian
> >
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe
> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flegacyusers.com%2Fmailman%2Flistinfo%2Flegacyusergroup_legacyusers.comdata=02%7C01%7C%7C5061ce48e3914133243808d61c34dde0%7C84df9e7fe9f640afb435%7C1%7C0%7C636727410710932543sdata=RUk2Yv3UxVdN7MMxHWt%2FO0ZCN9dQfyrcUlHNjqklTM4%3Dreserved=0
> Archives at:
>
> https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mail-archive.com%2Flegacyusergroup%40legacyusers.com%2Fdata=02%7C01%7C%7C5061ce48e3914133243808d61c34dde0%7C84df9e7fe9f640afb435%7C1%7C0%7C636727410710932543sdata=AIBKjEifkx2CzronH6AdFx0DT7d1Z8qbwmpLXxCCkGI%3Dreserved=0
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread Gene Hutson

We seem to still get the lip service, “the programmers won’t go for that”
 or “we have found this problem also, you will get the credit for finding it”
 but never seems to go anywhere. Who was this designed for in the first
 place, us, the users… or the programmers??

Sent from Mail for Windows 10

From: CE WOOD
Sent: Sunday, September 16, 2018 8:26 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Programmers?

Since it nothing ever happens, people have stopped trying, which is probably 
what they wanted to have happen anyway.

CE 

From: LegacyUserGroup  on behalf of 
Cathy Pinner 
Sent: Sunday, September 16, 2018 5:30 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Programmers? 

We'd all like our pet bugs fixed. I know I have a few.

However, the programmers are not doing nothing.
Current GR release is no 226. Current beta release is 253. Each release 
has numbers of fixes to test.

If you have particular problems in mind, you need to contact Support or 
send them in so they get entered or updated in the bug tracking, not 
report here where they mostly go nowhere.

Cathy

Ronald E Howell via LegacyUserGroup wrote on 17/09/2018 5:15 AM:
>
> On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  > wrote:
>
> I am beginning to think that the programmers of Lagacy all quit
> when the company sold, or they have gone to sleep.
>
> The simplest of fixes has not been done and there is no sign of
> any real changes or updates to the code.
>
> For example how hard is it to make a field unique entry.  The FAG
> number should be unique and yet  this program keeps erasing the
> number when its duplicated, not when its entered where it would be
> noticed but only after a cleanup.
>
> Rule #1 "do not destroy customer data"
>
> Yep, I just got angry,  sorry.
>
> Ian
>

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flegacyusers.com%2Fmailman%2Flistinfo%2Flegacyusergroup_legacyusers.comdata=02%7C01%7C%7C5061ce48e3914133243808d61c34dde0%7C84df9e7fe9f640afb435%7C1%7C0%7C636727410710932543sdata=RUk2Yv3UxVdN7MMxHWt%2FO0ZCN9dQfyrcUlHNjqklTM4%3Dreserved=0
Archives at:
https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mail-archive.com%2Flegacyusergroup%40legacyusers.com%2Fdata=02%7C01%7C%7C5061ce48e3914133243808d61c34dde0%7C84df9e7fe9f640afb435%7C1%7C0%7C636727410710932543sdata=AIBKjEifkx2CzronH6AdFx0DT7d1Z8qbwmpLXxCCkGI%3Dreserved=0

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread CE WOOD

Since it nothing ever happens, people have stopped trying, which is probably 
what they wanted to have happen anyway.



CE


From: LegacyUserGroup  on behalf of 
Cathy Pinner 
Sent: Sunday, September 16, 2018 5:30 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Programmers?

We'd all like our pet bugs fixed. I know I have a few.

However, the programmers are not doing nothing.
Current GR release is no 226. Current beta release is 253. Each release
has numbers of fixes to test.

If you have particular problems in mind, you need to contact Support or
send them in so they get entered or updated in the bug tracking, not
report here where they mostly go nowhere.

Cathy

Ronald E Howell via LegacyUserGroup wrote on 17/09/2018 5:15 AM:
>
> On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  > wrote:
>
> I am beginning to think that the programmers of Lagacy all quit
> when the company sold, or they have gone to sleep.
>
> The simplest of fixes has not been done and there is no sign of
> any real changes or updates to the code.
>
> For example how hard is it to make a field unique entry.  The FAG
> number should be unique and yet  this program keeps erasing the
> number when its duplicated, not when its entered where it would be
> noticed but only after a cleanup.
>
> Rule #1 "do not destroy customer data"
>
> Yep, I just got angry,  sorry.
>
> Ian
>


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Flegacyusers.com%2Fmailman%2Flistinfo%2Flegacyusergroup_legacyusers.comdata=02%7C01%7C%7C5061ce48e3914133243808d61c34dde0%7C84df9e7fe9f640afb435%7C1%7C0%7C636727410710932543sdata=RUk2Yv3UxVdN7MMxHWt%2FO0ZCN9dQfyrcUlHNjqklTM4%3Dreserved=0
Archives at:
https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.mail-archive.com%2Flegacyusergroup%40legacyusers.com%2Fdata=02%7C01%7C%7C5061ce48e3914133243808d61c34dde0%7C84df9e7fe9f640afb435%7C1%7C0%7C636727410710932543sdata=AIBKjEifkx2CzronH6AdFx0DT7d1Z8qbwmpLXxCCkGI%3Dreserved=0
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread CE WOOD

Mapping does not work in any of the previous versions because Legacy is not 
interested in making it work. It is SIMPLE MANY other sites QUICKLY updated 
to the new Bing standards, but Legacy, quite obviously, can't be bothered. So 
much for listening to the people who made Legacy into a great program. Now they 
are ruining it.


CE


From: LegacyUserGroup  on behalf of 
Gene Wheeler 
Sent: Sunday, September 16, 2018 6:09 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Programmers?

There seems to be three options for us frustrated with the lack of mapping in 
v.9 Go back to v.8, change to another program, e.g. RootsMagic, or just 
live with the current situation. The last option is the least preferable.

Gene

On Sun, Sep 16, 2018 at 7:58 PM, Gene Hutson 
mailto:bigfish68...@gmail.com>> wrote:

I too am afraid that the Legacy we all knew and cherished has gone the

way of the dinosaur, like so many of our relatives we research now, never

to be forgotten… but never to be resurrected either.



We used to see sporadic updates… now it just seems we go along with the

flow. Sad to see it happen, but not totally unexpected either.



Sent from 
Mail
 for Windows 10



From: betty hayden bickham
Sent: Sunday, September 16, 2018 3:02 PM
To: legacyusergroup@legacyusers.com
Subject: Re: [LegacyUG] Programmers?



agree  totally.so many problems and not really any solutionsbought 
my LAST update since originally marketed



On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay 
mailto:macau...@icmac.ca>> wrote:

I am beginning to think that the programmers of Lagacy all quit when the 
company sold, or they have gone to sleep.



The simplest of fixes has not been done and there is no sign of any real 
changes or updates to the code.



For example how hard is it to make a field unique entry.  The FAG number should 
be unique and yet  this program keeps erasing the number when its duplicated, 
not when its entered where it would be noticed but only after a cleanup.



Rule #1 "do not destroy customer data"



Yep, I just got angry,  sorry.



Ian



--

  ICMac Sales: Hobby consultant (1986r.)

Office hours:   10:00 Am - 5:00 PM  most days

  Macaulay Genealogy
 Family Matters
  Ian Macaulayof Carp, Ontario

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/



--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread Gene Wheeler

There seems to be three options for us frustrated with the lack of mapping
in v.9 Go back to v.8, change to another program, e.g. RootsMagic, or
just live with the current situation. The last option is the least
preferable.

Gene

On Sun, Sep 16, 2018 at 7:58 PM, Gene Hutson  wrote:

> I too am afraid that the Legacy we all knew and cherished has gone the
>
> way of the dinosaur, like so many of our relatives we research now, never
>
> to be forgotten… but never to be resurrected either.
>
>
>
> We used to see sporadic updates… now it just seems we go along with the
>
> flow. Sad to see it happen, but not totally unexpected either.
>
>
>
> Sent from Mail  for
> Windows 10
>
>
>
> *From: *betty hayden bickham 
> *Sent: *Sunday, September 16, 2018 3:02 PM
> *To: *legacyusergroup@legacyusers.com
> *Subject: *Re: [LegacyUG] Programmers?
>
>
>
> agree  totally.so many problems and not really any
> solutionsbought my LAST update since originally marketed
>
>
>
> On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  wrote:
>
> I am beginning to think that the programmers of Lagacy all quit when the
> company sold, or they have gone to sleep.
>
>
>
> The simplest of fixes has not been done and there is no sign of any real
> changes or updates to the code.
>
>
>
> For example how hard is it to make a field unique entry.  The FAG number
> should be unique and yet  this program keeps erasing the number when its
> duplicated, not when its entered where it would be noticed but only after a
> cleanup.
>
>
>
> Rule #1 "do not destroy customer data"
>
>
>
> Yep, I just got angry,  sorry.
>
>
>
> Ian
>
>
>
> --
>
>   ICMac Sales: Hobby consultant (1986r.)
>
> Office hours:   10:00 Am - 5:00 PM  most days
>
>   Macaulay Genealogy
>  Family Matters
>   Ian Macaulayof Carp, Ontario
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread Gene Hutson

I too am afraid that the Legacy we all knew and cherished has gone the
 way of the dinosaur, like so many of our relatives we research now, never
 to be forgotten… but never to be resurrected either.

We used to see sporadic updates… now it just seems we go along with the
 flow. Sad to see it happen, but not totally unexpected either. 

Sent from Mail for Windows 10

From: betty hayden bickham
Sent: Sunday, September 16, 2018 3:02 PM
To: legacyusergroup@legacyusers.com
Subject: Re: [LegacyUG] Programmers?

agree  totally.so many problems and not really any solutionsbought 
my LAST update since originally marketed

On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  wrote:
I am beginning to think that the programmers of Lagacy all quit when the 
company sold, or they have gone to sleep.

The simplest of fixes has not been done and there is no sign of any real 
changes or updates to the code.

For example how hard is it to make a field unique entry.  The FAG number should 
be unique and yet  this program keeps erasing the number when its duplicated, 
not when its entered where it would be noticed but only after a cleanup.  

Rule #1 "do not destroy customer data"

Yep, I just got angry,  sorry.  

Ian


-- 
  ICMac Sales:     Hobby consultant (1986r.)
Office hours:   10:00 Am - 5:00 PM  most days
              Macaulay Genealogy
                 Family Matters
      Ian Macaulay    of Carp, Ontario
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread Cathy Pinner


We'd all like our pet bugs fixed. I know I have a few.

However, the programmers are not doing nothing.
Current GR release is no 226. Current beta release is 253. Each release 
has numbers of fixes to test.


If you have particular problems in mind, you need to contact Support or 
send them in so they get entered or updated in the bug tracking, not 
report here where they mostly go nowhere.


Cathy

Ronald E Howell via LegacyUserGroup wrote on 17/09/2018 5:15 AM:


On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay > wrote:


I am beginning to think that the programmers of Lagacy all quit
when the company sold, or they have gone to sleep.

The simplest of fixes has not been done and there is no sign of
any real changes or updates to the code.

For example how hard is it to make a field unique entry.  The FAG
number should be unique and yet  this program keeps erasing the
number when its duplicated, not when its entered where it would be
noticed but only after a cleanup.

Rule #1 "do not destroy customer data"

Yep, I just got angry,  sorry.

Ian




--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries- Correction

2018-09-16 Thread Cathy Pinner


Gene,
What's your problem with the Help file?

You can go the hard way - Help - Help Index and search for Name List and 
see Printing in the list.
Click to display. Scroll to the relevent section on Printing that has a 
link to List Report.

There it explains how to set it up and that it can be saved to csv.

OR you can search for CSV and be taken immediately to the Name List 
Reports section


OR the easier way - Click the Help button on the Name List or the Print 
dialogue and go straight to the relevant section of the Help.


Can the Help be improved? Always. But it's pretty good. If you have 
suggestions where it needs improvement, send them in.


Cathy

Gene Young wrote:


Though I have not been able to find this information in the help file
(surprise surprise!) you can save this list to a .CSV or .PDF file by
clicking the tab marked options then selecting "print." check all
items you want included, select what type of file you want to create
then click on the "Create" button.

On 9/16/2018 10:45 AM, Barry Huntsinger via LegacyUserGroup wrote:



I need to correct by information. Go to Master Lists, Address, Event,
select the cemetery and then click "Show List".


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Error 527

2018-09-16 Thread Jenny M Benson


On 16-Sep-18 11:15 PM, Margaret Gagliardi wrote:

I just tried to back up a newly made family file and received this error:
Backup Error: 527, At least one "SkippingFile" event was triggered 
because an error prevented a file from being processed.

I don't know what to do.  Will someone help me please?


On the Legacy Home tab click on Online Troubleshooting Help in the 
right-hand column.  On the web page which opens click on Error Messages 
& Problems in the left-hand column.  Scroll down the list which appears 
and select Error 527.  Follow the steps given.


--
Jenny M Benson
http://jennygenes.blogspot.co.uk/

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Error 527

2018-09-16 Thread Margaret Gagliardi

I just tried to back up a newly made family file and received this error:
Backup Error: 527, At least one "SkippingFile" event was triggered because
an error prevented a file from being processed.
I don't know what to do.  Will someone help me please?
Thanks
Margaret
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread Ronald E Howell via LegacyUserGroup

The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try.--- Begin Message ---
Been waiting for a fix to the detail source query using “and” since May!



Thanks,

RH



From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of betty hayden bickham
Sent: Sunday, September 16, 2018 3:01 PM
To: legacyusergroup@legacyusers.com
Subject: Re: [LegacyUG] Programmers?



agree  totally.so many problems and not really any solutionsbought 
my LAST update since originally marketed



On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  wrote:

I am beginning to think that the programmers of Lagacy all quit when the 
company sold, or they have gone to sleep.



The simplest of fixes has not been done and there is no sign of any real 
changes or updates to the code.



For example how hard is it to make a field unique entry.  The FAG number should 
be unique and yet  this program keeps erasing the number when its duplicated, 
not when its entered where it would be noticed but only after a cleanup.



Rule #1 "do not destroy customer data"



Yep, I just got angry,  sorry.



Ian




--

  ICMac Sales: Hobby consultant (1986r.)

Office hours:   10:00 Am - 5:00 PM  most days

  Macaulay Genealogy
 Family Matters
  Ian Macaulayof Carp, Ontario

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
--- End Message ---
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Programmers?

2018-09-16 Thread betty hayden bickham

agree  totally.so many problems and not really any
solutionsbought my LAST update since originally marketed

On Sun, Sep 16, 2018 at 2:13 PM Ian Macaulay  wrote:

> I am beginning to think that the programmers of Lagacy all quit when the
> company sold, or they have gone to sleep.
>
> The simplest of fixes has not been done and there is no sign of any real
> changes or updates to the code.
>
> For example how hard is it to make a field unique entry.  The FAG number
> should be unique and yet  this program keeps erasing the number when its
> duplicated, not when its entered where it would be noticed but only after a
> cleanup.
>
> Rule #1 "do not destroy customer data"
>
> Yep, I just got angry,  sorry.
>
> Ian
>
> --
>   ICMac Sales: Hobby consultant (1986r.)
> Office hours:   10:00 Am - 5:00 PM  most days
>   Macaulay Genealogy
>  Family Matters
>   Ian Macaulayof Carp, Ontario
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Programmers?

2018-09-16 Thread Ian Macaulay

I am beginning to think that the programmers of Lagacy all quit when the
company sold, or they have gone to sleep.

The simplest of fixes has not been done and there is no sign of any real
changes or updates to the code.

For example how hard is it to make a field unique entry.  The FAG number
should be unique and yet  this program keeps erasing the number when its
duplicated, not when its entered where it would be noticed but only after a
cleanup.

Rule #1 "do not destroy customer data"

Yep, I just got angry,  sorry.

Ian

-- 
  ICMac Sales: Hobby consultant (1986r.)
Office hours:   10:00 Am - 5:00 PM  most days
  Macaulay Genealogy
 Family Matters
  Ian Macaulayof Carp, Ontario
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Overlapping Print

2018-09-16 Thread Rita McKale

I have tried the reset button and that sets it back to the default 
settings….and when I run the report that way it is fine, but then I go back 
and the set the report options the way I would like it print and again I have 
overlapping print.  What else do I  need to do?



Thanks,

Rita



From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Michele Lewis
Sent: Tuesday, July 03, 2018 5:11 PM
To: Legacy User Group 
Subject: Re: [LegacyUG] Overlapping Print



 Open the report and then click the reset button in the lower right-hand 
corner. After you do that, go back to the report options and make sure that the 
check marks haven’t checked themselves back. Now run your report







On Tue, Jul 3, 2018 at 17:00 Rita Lynn McKale mailto:cagr...@comporium.net> > wrote:

Ok, I unchecked the FindAGrave ID and that removed the numbers………But now the 
bottom of page 1 is overlapping onto the top of page 2.



I did check/repair and have rebooted my computer but it is still overlapping.



Rita




 


Virus-free.  

 www.avg.com 

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com 
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

--

Michele
Tech Support
Legacy Family Tree
  mich...@legacyfamilytree.com
  http://www.LegacyFamilyTree.com



---
This email has been checked for viruses by AVG.
https://www.avg.com
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries- Correction

2018-09-16 Thread Gene Young


Though I have not been able to find this information in the help file (surprise surprise!) you can 
save this list to a .CSV or .PDF file by clicking the tab marked options then selecting 
"print." check all items you want included, select what type of file you want to create 
then click on the "Create" button.

On 9/16/2018 10:45 AM, Barry Huntsinger via LegacyUserGroup wrote:


I need to correct by information. Go to Master Lists, Address, Event, select the cemetery 
and then click "Show List".


--

Gene Young
Researching Young, Harer, Cox & Sallada
With Legacy Family Tree
http://myyoungs.atspace.com/index.htm

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries- Correction

2018-09-16 Thread Barry Huntsinger via LegacyUserGroup

The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try.--- Begin Message ---
 I need to correct by information. Go to Master Lists, Address, Event, select 
the cemetery and then click "Show List".

On Sunday, September 16, 2018, 9:41:27 AM CDT, Barry Huntsinger via 
LegacyUserGroup  wrote:  

 The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try. Go to Master 
Lists/ Event List/select the cemetery and then click on list. Another way to 
get there.

On Sunday, September 16, 2018, 9:24:08 AM CDT, Donna Newell 
 wrote:  

 I use the event description field for the name of the cemetery.  You can then 
do a search on that field.  I use Search, individual, Event-Description, 
contains, then the name of the cemetery I am searching for.  Up comes my search 
list which I can print using the option button at the bottom, then click print. 
 You then choose the length of each of the fields you need.  

Sent from my iPad

> On Sep 16, 2018, at 2:49 AM, Jean Gobel  wrote:
> 
> Susie Zada, that  is exactly I mean.  I have like fifty people buried on one 
> cemetery.  I would like a list of them.
> 
> -Original Message- 
> From: Susie Zada
> Sent: Saturday, September 15, 2018 9:11 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Cemeteries
> 
> Hi Jean,
> 
> Do you mean the people in your Legacy database buried in a particular 
> cemetery?
> 
> Regards ... Susie Z
> 
> September 16, 2018 12:36 PM, "Jean Gobel"  wrote:
> 
>> How can I get list list of everyone buried in a particular cemetery?
>> Jean Gobel
>> 
>> -- 
>> 
>> LegacyUserGroup mailing list
>> LegacyUserGroup@legacyusers.com
>> To manage your subscription and unsubscribe
>> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
>> Archives at:
>> http://www.mail-archive.com/legacyusergroup@legacyusers.com
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/ 
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
  -- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
  --- End Message ---
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries

2018-09-16 Thread Barry Huntsinger via LegacyUserGroup

The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try.--- Begin Message ---
 Go to Master Lists/ Event List/select the cemetery and then click on list. 
Another way to get there.

On Sunday, September 16, 2018, 9:24:08 AM CDT, Donna Newell 
 wrote:  
 
 I use the event description field for the name of the cemetery.  You can then 
do a search on that field.  I use Search, individual, Event-Description, 
contains, then the name of the cemetery I am searching for.  Up comes my search 
list which I can print using the option button at the bottom, then click print. 
 You then choose the length of each of the fields you need.  

Sent from my iPad

> On Sep 16, 2018, at 2:49 AM, Jean Gobel  wrote:
> 
> Susie Zada, that  is exactly I mean.  I have like fifty people buried on one 
> cemetery.  I would like a list of them.
> 
> -Original Message- 
> From: Susie Zada
> Sent: Saturday, September 15, 2018 9:11 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Cemeteries
> 
> Hi Jean,
> 
> Do you mean the people in your Legacy database buried in a particular 
> cemetery?
> 
> Regards ... Susie Z
> 
> September 16, 2018 12:36 PM, "Jean Gobel"  wrote:
> 
>> How can I get list list of everyone buried in a particular cemetery?
>> Jean Gobel
>> 
>> -- 
>> 
>> LegacyUserGroup mailing list
>> LegacyUserGroup@legacyusers.com
>> To manage your subscription and unsubscribe
>> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
>> Archives at:
>> http://www.mail-archive.com/legacyusergroup@legacyusers.com
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/ 
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
  --- End Message ---
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries

2018-09-16 Thread Donna Newell

I use the event description field for the name of the cemetery.  You can then 
do a search on that field.  I use Search, individual, Event-Description, 
contains, then the name of the cemetery I am searching for.  Up comes my search 
list which I can print using the option button at the bottom, then click print. 
 You then choose the length of each of the fields you need.  

Sent from my iPad

> On Sep 16, 2018, at 2:49 AM, Jean Gobel  wrote:
> 
> Susie Zada, that  is exactly I mean.  I have like fifty people buried on one 
> cemetery.   I would like a list of them.
> 
> -Original Message- 
> From: Susie Zada
> Sent: Saturday, September 15, 2018 9:11 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Cemeteries
> 
> Hi Jean,
> 
> Do you mean the people in your Legacy database buried in a particular 
> cemetery?
> 
> Regards ... Susie Z
> 
> September 16, 2018 12:36 PM, "Jean Gobel"  wrote:
> 
>> How can I get list list of everyone buried in a particular cemetery?
>> Jean Gobel
>> 
>> -- 
>> 
>> LegacyUserGroup mailing list
>> LegacyUserGroup@legacyusers.com
>> To manage your subscription and unsubscribe
>> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
>> Archives at:
>> http://www.mail-archive.com/legacyusergroup@legacyusers.com
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/ 
> 
> 
> -- 
> 
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe 
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries

2018-09-16 Thread Susie Zada

Hi Jean,

Cathy gave you a good link to achieve what you're trying to do.

Hopefully you've entered cemeteries using one of those methods.

If not, explain to us how you've entered the cemeteries.

It can also be a good opportunity to tidy up your entries for cemeteries.

Hope that helps.

Regards ... Susie Z

September 16, 2018 5:50 PM, "Jean Gobel"  wrote:

> Susie Zada, that is exactly I mean. I have like fifty people buried on one 
> cemetery. I would like a list of them.
> 
> -Original Message- 
> From: Susie Zada
> Sent: Saturday, September 15, 2018 9:11 PM
> To: Legacy User Group
> Subject: Re: [LegacyUG] Cemeteries
> 
> Hi Jean,
> 
> Do you mean the people in your Legacy database buried in a particular 
> cemetery?
> 
> Regards ... Susie Z
>


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries

2018-09-16 Thread Jean Gobel

Susie Zada, that  is exactly I mean.  I have like fifty people buried on one 
cemetery.   I would like a list of them.

-Original Message- 
From: Susie Zada
Sent: Saturday, September 15, 2018 9:11 PM
To: Legacy User Group
Subject: Re: [LegacyUG] Cemeteries

Hi Jean,

Do you mean the people in your Legacy database buried in a particular 
cemetery?

Regards ... Susie Z

September 16, 2018 12:36 PM, "Jean Gobel"  wrote:

> How can I get list list of everyone buried in a particular cemetery?
> Jean Gobel
>
> -- 
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe
> http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/ 


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Cemeteries

2018-09-16 Thread Cathy Pinner


Jean,
How you get a list from Legacy depends on where you entered the name of 
the cemetery.
Here's an article with several options. If it doesn't cover how you 
entered the cemetery you'll need to tell us exactly.

http://support.legacyfamilytree.com/article/AA-01006

Cathy

Susie Zada wrote:


Hi Jean,

Do you mean the people in your Legacy database buried in a particular 
cemetery?


Regards ... Susie Z

September 16, 2018 12:36 PM, "Jean Gobel"  wrote:



How can I get list list of everyone buried in a particular cemetery?
Jean Gobel

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com







Susie Zada 
Sunday, 16 September 2018 12:11 PM
Hi Jean,

Do you mean the people in your Legacy database buried in a particular 
cemetery?


Regards ... Susie Z



Jean Gobel 
Sunday, 16 September 2018 10:35 AM
How can I get list list of everyone buried in a particular cemetery?
Jean Gobel




--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Overlapping Print

Re: [LegacyUG] Chart stuck on taskbar

Re: [LegacyUG] Chart stuck on taskbar

[LegacyUG] Chart stuck on taskbar

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Cemeteries- Correction

Re: [LegacyUG] Error 527

[LegacyUG] Error 527

Re: [LegacyUG] Programmers?

Re: [LegacyUG] Programmers?

[LegacyUG] Programmers?

Re: [LegacyUG] Overlapping Print

Re: [LegacyUG] Cemeteries- Correction

Re: [LegacyUG] Cemeteries- Correction

Re: [LegacyUG] Cemeteries

Re: [LegacyUG] Cemeteries

Re: [LegacyUG] Cemeteries

Re: [LegacyUG] Cemeteries

Re: [LegacyUG] Cemeteries

25 matches

Site Navigation

Mail list logo

Footer information