Re: [MBZ] Diesel 107

2021-07-31 Thread Allan Streib via Mercedes
What, no hood stack? Pass.

Looks like it's running a little hot also. My 300SD rarely goes past 175.

Allan

On Sat, Jul 31, 2021, at 11:07 PM, Kaleb Striplin via Mercedes wrote:
> https://www.facebook.com/marketplace/item/1679513295552357/
> 
> 
> Sent from my iPhone
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] New season of OBX on the flix

2021-07-31 Thread Buggered Benzmail via Mercedes
Has a nice green 300D being driven by a villain 

--FT
Sent from iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Diesel 107

2021-07-31 Thread Kaleb Striplin via Mercedes
https://www.facebook.com/marketplace/item/1679513295552357/


Sent from my iPhone

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Scott Ritchey via Mercedes
I can't comment on all these new electronic (GFCI/AFCI, etc.) breakers but
old time breakers had a trip curve (e.g.:
https://www.electriciantalk.com/attachments/type-b-jpg.52369/).  The breaker
was guaranteed to trip just above the rated current but only after hundreds
or thousands of seconds.  On the other hand many times (like 50x) the rated
current could pass for a few milliseconds without tripping the breaker.
Most breakers would pass 3-5x the rated current for a couple seconds before
tripping.  All this makes sense when you realize these numbers are
sufficient to protect the wires.  Fuses are a whole different animal.

-Original Message-
From: Mercedes On Behalf Of Allan Streib via Mercedes
Sent: Saturday, July 31, 2021 10:43 PM
To: Mercedes Discussion List 
Cc: Allan Streib 
Subject: Re: [MBZ] Generators and Mini-Splits, Anyone Know?

What is the error tolerance on the Ampere rating on a circuit breaker?

Maybe your 15A breaker is allowing a little more than that, and the
recommeded 20 assumes that the actual breaker might trip a little lower.
There must be a little headroom on the required rating, so that people don't
complain that their breakers are always tripping off.

Allan

On Sat, Jul 31, 2021, at 9:37 PM, Mitch Haley via Mercedes wrote:
> On 2021-07-31 20:29, Scott Ritchey via Mercedes wrote:
> > Good data point.  Thanks.
> 
> The LRA (locked rotor amps) on my 1.5T are 47.
> I do not know why I can start it on a fast blow 15A breaker.
> The install instructions demand a 20A HACR (slow blow HVAC) breaker.
> Maybe the start kit helps?
> What would really help is a 'slow start kit'.
> Hard start kits don't reduce LRA, they just reduce the time for amps 
> to drop.
> The 5-2-1 kits are considered the superior hard starts, but slow start 
> makes it ramp up like an inverter drive.
> https://www.cpsproducts.com/hvacr/5-2-1-compressor-saver/
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Foul Dispensation

2021-07-31 Thread Allan Streib via Mercedes
Link was mangled.

https://www.cbc.ca/news/canada/calgary/gas-plus-langdon-diesel-1.6123402


On Sat, Jul 31, 2021, at 10:46 PM, Clay via Mercedes wrote:
> https://www.cb 
> c.ca/news/canada/calgary/gas-plus-langdon-diesel-1.6123402 
> 
> 
> Since there is still a closed border, most of us will not be plagued by this 
> unfortunate turn of events.  Big inconvenience for those how did fuel up.  
> 
> 
> Clay
> 
> "When it becomes dominated by a collectivist creed, democracy will inevitably 
> destroy itself”
> F A Hayak
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Mitch Haley via Mercedes

The running amps are around 7-8.
But the starting amps are (very briefly) 47 plus whatever the fan draws.
I'm not surprised that a 20A time delay breaker can handle it, but it 
seems the 15A fast blow isn't as instant as I might have assumed it to 
be.



On 2021-07-31 22:43, Allan Streib via Mercedes wrote:

What is the error tolerance on the Ampere rating on a circuit breaker?

Maybe your 15A breaker is allowing a little more than that, and the
recommeded 20 assumes that the actual breaker might trip a little
lower. There must be a little headroom on the required rating, so that
people don't complain that their breakers are always tripping off.


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Foul Dispensation

2021-07-31 Thread Clay via Mercedes
https://www.cb 
c.ca/news/canada/calgary/gas-plus-langdon-diesel-1.6123402 


Since there is still a closed border, most of us will not be plagued by this 
unfortunate turn of events.  Big inconvenience for those how did fuel up.  


Clay

"When it becomes dominated by a collectivist creed, democracy will inevitably 
destroy itself”
F A Hayak

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Allan Streib via Mercedes
What is the error tolerance on the Ampere rating on a circuit breaker?

Maybe your 15A breaker is allowing a little more than that, and the recommeded 
20 assumes that the actual breaker might trip a little lower. There must be a 
little headroom on the required rating, so that people don't complain that 
their breakers are always tripping off.

Allan

On Sat, Jul 31, 2021, at 9:37 PM, Mitch Haley via Mercedes wrote:
> On 2021-07-31 20:29, Scott Ritchey via Mercedes wrote:
> > Good data point.  Thanks.
> 
> The LRA (locked rotor amps) on my 1.5T are 47.
> I do not know why I can start it on a fast blow 15A breaker.
> The install instructions demand a 20A HACR (slow blow HVAC) breaker.
> Maybe the start kit helps?
> What would really help is a 'slow start kit'.
> Hard start kits don't reduce LRA, they just reduce the time for amps to 
> drop.
> The 5-2-1 kits are considered the superior hard starts, but slow start 
> makes it ramp up like an inverter drive.
> https://www.cpsproducts.com/hvacr/5-2-1-compressor-saver/
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 2005 E320 4matic - 200k miles - $3,800

2021-07-31 Thread Dwight Giles via Mercedes
True. You are correct. All i ever hang on my mirror is handicapped parking
sticker.

Dwight Giles Jr.
Wickford RI

On Sat, Jul 31, 2021, 9:40 PM Dimitri Seretakis via Mercedes <
mercedes@okiebenz.com> wrote:

> Yours doesn’t have the tacky stuff hanging from the rear view mirror. I
> wouldn’t trust the seller of a car that has such adornments.
>
> Sent from my iPhone
>
> > On Jul 31, 2021, at 8:56 PM, Dwight Giles via Mercedes <
> mercedes@okiebenz.com> wrote:
> >
> > My car exactly. Mine has 189k miles
> >
> > Dwight Giles Jr.
> > Wickford RI
> >
> >> On Sat, Jul 31, 2021, 8:51 PM Allan Streib via Mercedes <
> >> mercedes@okiebenz.com> wrote:
> >>
> >> Snoozer colors, looks reasonably clean otherwise. Pricy for the miles?
> >>
> >>
> >>
> https://chicago.craigslist.org/chc/cto/d/chicago-2005-mercedes-benz-e320-4matic/7359043087.html
> >>
> >> Allan
> >> ___
> >> http://www.okiebenz.com
> >>
> >> To search list archives http://www.okiebenz.com/archive/
> >>
> >> To Unsubscribe or change delivery options go to:
> >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >>
> >>
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
>
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] OT - Bathroom Flooring Question

2021-07-31 Thread dan penoff.com via Mercedes
If that.

-D

> On Jul 31, 2021, at 9:11 PM, Jim Cathey  wrote:
> 
>> paneled inside with 1/2” thick solid wood paneling, but there’s nothing 
>> behind it over the studs.
> 
> Oooo, R0.5!
> 
> -- Jim
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 2005 E320 4matic - 200k miles - $3,800

2021-07-31 Thread Dimitri Seretakis via Mercedes
Yours doesn’t have the tacky stuff hanging from the rear view mirror. I 
wouldn’t trust the seller of a car that has such adornments.

Sent from my iPhone

> On Jul 31, 2021, at 8:56 PM, Dwight Giles via Mercedes 
>  wrote:
> 
> My car exactly. Mine has 189k miles
> 
> Dwight Giles Jr.
> Wickford RI
> 
>> On Sat, Jul 31, 2021, 8:51 PM Allan Streib via Mercedes <
>> mercedes@okiebenz.com> wrote:
>> 
>> Snoozer colors, looks reasonably clean otherwise. Pricy for the miles?
>> 
>> 
>> https://chicago.craigslist.org/chc/cto/d/chicago-2005-mercedes-benz-e320-4matic/7359043087.html
>> 
>> Allan
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
>> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Mitch Haley via Mercedes

On 2021-07-31 20:29, Scott Ritchey via Mercedes wrote:

Good data point.  Thanks.


The LRA (locked rotor amps) on my 1.5T are 47.
I do not know why I can start it on a fast blow 15A breaker.
The install instructions demand a 20A HACR (slow blow HVAC) breaker.
Maybe the start kit helps?
What would really help is a 'slow start kit'.
Hard start kits don't reduce LRA, they just reduce the time for amps to 
drop.
The 5-2-1 kits are considered the superior hard starts, but slow start 
makes it ramp up like an inverter drive.

https://www.cpsproducts.com/hvacr/5-2-1-compressor-saver/

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] OT interesting video

2021-07-31 Thread Craig via Mercedes
On Fri, 30 Jul 2021 02:29:31 + Rick Knoble via Mercedes
 wrote:

> > Don't get addicted. Otherwise relax and enjoy it to whatever degree
> > you can.
> 
> Thanks Allan. I gave Craig the same admonishment several years ago.

Not only did I not get addicted, I wanted to get off the stuff as rapidly
as possible because of how constipated I got from it.


> I plan on getting extremely adept with my right (non-dominant) arm and
> arresting my tendency to procrastinate. Worthy goals, in my opinion.

I changed from right-hand to left-hand mouse when my right hand started
hurting. It did not take too long to get used to it.

Arresting my tendency to procrastinate is indeed a worthy goal.


Craig

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] OT - Bathroom Flooring Question

2021-07-31 Thread Jim Cathey via Mercedes
> paneled inside with 1/2” thick solid wood paneling, but there’s nothing 
> behind it over the studs.

Oooo, R0.5!

-- Jim


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 2005 E320 4matic - 200k miles - $3,800

2021-07-31 Thread Dwight Giles via Mercedes
My car exactly. Mine has 189k miles

Dwight Giles Jr.
Wickford RI

On Sat, Jul 31, 2021, 8:51 PM Allan Streib via Mercedes <
mercedes@okiebenz.com> wrote:

> Snoozer colors, looks reasonably clean otherwise. Pricy for the miles?
>
>
> https://chicago.craigslist.org/chc/cto/d/chicago-2005-mercedes-benz-e320-4matic/7359043087.html
>
> Allan
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] 2005 E320 4matic - 200k miles - $3,800

2021-07-31 Thread Allan Streib via Mercedes
Snoozer colors, looks reasonably clean otherwise. Pricy for the miles?

https://chicago.craigslist.org/chc/cto/d/chicago-2005-mercedes-benz-e320-4matic/7359043087.html

Allan
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] 2001 E320 - 107k miles - $3,900

2021-07-31 Thread Allan Streib via Mercedes
At one of the bottom-feeder used car lots here. They probably paid what, $1k 
for it at auction?

https://bloomington.craigslist.org/ctd/d/bloomington-2001-mercedes-benz-e320/7359103429.html

Allan
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Scott Ritchey via Mercedes
Good data point.  Thanks.

-Original Message-
From: Mitch Haley via Mercedes
Sent: Saturday, July 31, 2021 7:39 PM

On 2021-07-31 18:16, Scott Ritchey via Mercedes wrote:
> Maybe I need a peak-reading ac ammeter.  That's probably the only way 
> to know.  Or maybe I can find some data online.  My generator has no 
> problem running the water heater (which is totally unnecessary) but 
> that's a pure resistive load.

I don't have broad experience here, but a 3kw generator hardly notices a
9000BTU Fujitsu inverter unit.
Before I obtained a proper 20A HACR breaker, I ran my 1.5T traditional split
unit (with 3 wire hard start kit) on the 15A fast blow breaker that had
previously served the Fujitsu. No problem running the 1.5T with a 5kw/11hp
generator.

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread dan penoff.com via Mercedes
This is good to know. I have little to no experience with mini-splits as 
generator loads, so I can’t lend a lot of help here. Based on the branch 
circuit requirements for most I can’t imagine they draw a great deal.

-D

> On Jul 31, 2021, at 7:39 PM, Mitch Haley via Mercedes  
> wrote:
> 
> On 2021-07-31 18:16, Scott Ritchey via Mercedes wrote:
>> Maybe I need a peak-reading ac ammeter.  That's probably the only way
>> to know.  Or maybe I can find some data online.  My generator has no
>> problem running the water heater (which is totally unnecessary) but
>> that's a pure resistive load.
> 
> I don't have broad experience here, but a 3kw generator hardly notices a 
> 9000BTU Fujitsu inverter unit.
> Before I obtained a proper 20A HACR breaker, I ran my 1.5T traditional split 
> unit (with 3 wire hard start kit) on the 15A fast blow breaker that had 
> previously served the Fujitsu. No problem running the 1.5T with a 5kw/11hp 
> generator.
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Mitch Haley via Mercedes

On 2021-07-31 18:16, Scott Ritchey via Mercedes wrote:

Maybe I need a peak-reading ac ammeter.  That's probably the only way
to know.  Or maybe I can find some data online.  My generator has no
problem running the water heater (which is totally unnecessary) but
that's a pure resistive load.


I don't have broad experience here, but a 3kw generator hardly notices a 
9000BTU Fujitsu inverter unit.
Before I obtained a proper 20A HACR breaker, I ran my 1.5T traditional 
split unit (with 3 wire hard start kit) on the 15A fast blow breaker 
that had previously served the Fujitsu. No problem running the 1.5T with 
a 5kw/11hp generator.


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Very OT: Segway makes electric cars now

2021-07-31 Thread Mitch Haley via Mercedes

for those who wish they were Mario in a Nintendo game.
At least he's having fun.

https://www.youtube.com/watch?v=5kXSHRbYwmY

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Scott Ritchey via Mercedes
Maybe I need a peak-reading ac ammeter.  That's probably the only way to know.  
Or maybe I can find some data online.  My generator has no problem running the 
water heater (which is totally unnecessary) but that's a pure resistive load.

These mini-splits do not send line power direct to the compressor motor but to 
an inverter that generates variable frequency AC which drives the motor.  My 
recollection is that the compressor starts at a slow speed and then ramps up to 
a steady state based on the thermal demand.  My basic unit (like 17 SEER) uses 
a fixed expansion orifice so the compressor (and blower) speeds are modulated 
to achieve the target superheat and subcool.  The higher SEER units use 
electric thermal expansion valves.

I have one room (my office) that heats and cools poorly and I suspect I can 
install a high efficiency mini-split cheaper than reworking the duct work.  
Also it might still work on the generator if the power goes out..

-Original Message-
From: Mercedes On Behalf Of dan penoff.com via Mercedes
Sent: Saturday, July 31, 2021 12:02 PM
To: Okie Benz 
Cc: dan penoff.com 
Subject: Re: [MBZ] Generators and Mini-Splits, Anyone Know?

Just off the cuff I would suspect it could run a couple of them without too 
much effort. You would need to determine what the code letter of the compressor 
motor is to get an accurate idea. This would apply especially if they don’t 
start simultaneously, which might be a bit much even for a 15kW unit, depending 
on what other loads are present. I would think it wouldn’t have much of a 
problem starting them one at a time.

-D

> On Jul 31, 2021, at 11:56 AM, Scott Ritchey via Mercedes 
>  wrote:
> 
> I know most generators can't run a conventional AC/Heat Pump because 
> of the high compressor startup currents except (maybe) with a soft-start kit.
> 
> I wondered about mini-split systems.  These are smaller size and seem 
> to "ramp up" in speed which seems like it should moderate the high 
> start-up currents.
> 
> The 12K BTU unit I installed in my barn only uses a 10 amp breaker and 
> the equivalent 240v model is rated at only 5 amps per phase.
> 
> So I suspect my generator (15KW, 60 amp/phase) could run a couple of 
> these mini-split heat pumps.  Does anyone know?  As I recall, Dan had 
> expertise in this area (or am I thinking of someone else?).
> 
> Scott
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] OT e ha ow hyuh

2021-07-31 Thread Buggered Benzmail via Mercedes
(That’s Gullah)

Been loading up my 10ft trailer With random building materials, lumber, 
plumbing, wiring, etc. it’s 95F this afternoon, and humidity is right there 
too, so it has not been the most fun. But thunderstorms are moving through the 
area so it’s cooling off a bit now. Maybe I’ll wait until tomorrow to move 
stuff over, and go the beach for a swim after the storms pass. (Better plan!)

Hydrate or Die-drate!

--FT
Sent from iPhone
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] IPCC's Gold-Standard Temperature Data: Last 7.25 Years World Has Been Cooling

2021-07-31 Thread Craig via Mercedes
On Sat, 31 Jul 2021 14:40:19 -0600 Craig  wrote:

> https://www.c3headlines.com/2021/07/ipccs-gold-standard-temperature-data-last-725-years-world-has-been-cooling-those-stubborn-facts-.html
> 
> IPCC's Gold-Standard Temperature Data: Last 7.25 Years World Has Been
> Cooling
> 
> The UK's global land and ocean dataset of temperature measurements
> confirms there has been a 7 year and 3 month span of cooling, as of the
> end of month, June 2021. Plus, the correlation between the global temps
> and atmospheric CO2 levels is negative for that period: -0.036

Sorry, I forgot to attach the graph.


Craig
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] IPCC's Gold-Standard Temperature Data: Last 7.25 Years World Has Been Cooling

2021-07-31 Thread Craig via Mercedes
https://www.c3headlines.com/2021/07/ipccs-gold-standard-temperature-data-last-725-years-world-has-been-cooling-those-stubborn-facts-.html

IPCC's Gold-Standard Temperature Data: Last 7.25 Years World Has Been
Cooling

The UK's global land and ocean dataset of temperature measurements
confirms there has been a 7 year and 3 month span of cooling, as of the
end of month, June 2021. Plus, the correlation between the global temps
and atmospheric CO2 levels is negative for that period: -0.036


Craig

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] ML breaks

2021-07-31 Thread Curt Raymond via Mercedes
Probably would do better if the unboxer actually had boobs...
Curt

Sent from Yahoo Mail on Android 
 
  On Fri, Jul 30, 2021 at 7:49 PM, Meade Dillon via 
Mercedes wrote:   Start a you-boob channel, Amazon 
Unboxing Adventures!, you'll get famous
for mocking them.
-
Max
Charleston SC


On Fri, Jul 30, 2021 at 5:15 PM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

> I ordered a set of Bosch break pats from Amazon cheepcheep deals
> (returns) a coupla weeks ago, they arrived and were missing 1 break pat
> and one ware sincer were missing and 1 sincer was broken.  Box was torn
> up.  So I did a return then ordered another cheepcheep set.  The first
> set I think I have another week or so more to return, will need to do
> that soon and get my credit.  So I just got back last night and the
> other set was on the porch, opened it and all 4 pats where there, one
> sincer was stuck in a pat and the other was missing.  This box was torn
> up too.  Both boxes just had labels on them, were not in an envelope so
> who knows what happened in shipping.  I guess now I will send back the
> first set, and do a return on the second, and order a third set, wait on
> sending back the 2nd set, maybe there will be at least one wear sincer
> in the 3rd that I can build a full set from.
>
> Fun times as a bottom feeder... they are fairly cheap though, and there
> is no rush, so this is somewhat entertaining.
>
> --
> --FT
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Decent? Price a little high -- 2005 Mercedes ML350 Good Shape! - $4, 995 (Lexington)

2021-07-31 Thread Allan Streib via Mercedes
I'd say it's priced a bit optimistically, but not wildly so especially if it 
has service records.

I paid less for my XC90 that had lower miles and is newer, but needed new rear 
wheel bearings and had some other cosmetic flaws.

Allan

On Sat, Jul 31, 2021, at 2:06 PM, Meade Dillon via Mercedes wrote:
> That looks nice, is that last year of the 163?  This 3.5 liter is based on
> earlier motor, not the V6 that eats the balancer shaft and self destructs?
> -
> Max
> Charleston SC
> 
> 
> On Sat, Jul 31, 2021 at 10:41 AM Floyd Thursby via Mercedes <
> mercedes@okiebenz.com> wrote:
> 
> >
> > https://winstonsalem.craigslist.org/cto/d/lexington-2005-mercedes-ml350-good-shape/7358138275.html
> >
> > --
> > --FT
> >
> > ___
> > http://www.okiebenz.com
> >
> > To search list archives http://www.okiebenz.com/archive/
> >
> > To Unsubscribe or change delivery options go to:
> > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> >
> >
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> 
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Decent? Price a little high -- 2005 Mercedes ML350 Good Shape! - $4, 995 (Lexington)

2021-07-31 Thread Buggered Benzmail via Mercedes
Correctx3

--FT
Sent from iPhone

> On Jul 31, 2021, at 2:06 PM, Meade Dillon via Mercedes 
>  wrote:
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Today's crack or not crack: 1981 230CE Manual - 42k miles - $12, 950

2021-07-31 Thread Buggered Benzmail via Mercedes
Looks nice

--FT
Sent from iPhone

> On Jul 31, 2021, at 2:06 PM, G Mann via Mercedes  
> wrote:
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Decent? Price a little high -- 2005 Mercedes ML350 Good Shape! - $4, 995 (Lexington)

2021-07-31 Thread Rick Knoble via Mercedes
Correct.

Rick

From: Mercedes  on behalf of Meade Dillon via 
Mercedes 
Sent: Saturday, July 31, 2021 1:06:04 PM
To: Mercedes Discussion List 
Cc: Meade Dillon 
Subject: Re: [MBZ] Decent? Price a little high -- 2005 Mercedes ML350 Good 
Shape! - $4, 995 (Lexington)

That looks nice, is that last year of the 163?  This 3.5 liter is based on
earlier motor, not the V6 that eats the balancer shaft and self destructs?
-
Max
Charleston SC


On Sat, Jul 31, 2021 at 10:41 AM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

>
> https://winstonsalem.craigslist.org/cto/d/lexington-2005-mercedes-ml350-good-shape/7358138275.html
>
> --
> --FT
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] CL photos/ad of the week -- E320 - $3,500 (macon)

2021-07-31 Thread Meade Dillon via Mercedes
Sellers like this keep Kaleb employed...
-
Max
Charleston SC


On Sat, Jul 31, 2021 at 10:46 AM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

> https://macon.craigslist.org/cto/d/macon-e320/7358050727.html
>
> --
> --FT
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Decent? Price a little high -- 2005 Mercedes ML350 Good Shape! - $4, 995 (Lexington)

2021-07-31 Thread Meade Dillon via Mercedes
That looks nice, is that last year of the 163?  This 3.5 liter is based on
earlier motor, not the V6 that eats the balancer shaft and self destructs?
-
Max
Charleston SC


On Sat, Jul 31, 2021 at 10:41 AM Floyd Thursby via Mercedes <
mercedes@okiebenz.com> wrote:

>
> https://winstonsalem.craigslist.org/cto/d/lexington-2005-mercedes-ml350-good-shape/7358138275.html
>
> --
> --FT
>
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Today's crack or not crack: 1981 230CE Manual - 42k miles - $12, 950

2021-07-31 Thread G Mann via Mercedes
Small bumpers, 4 speed,crank windows, & CLOTH SEATS ... a sure marker for a
euro import.
Actually, only a little high on price.. market value

On Sat, Jul 31, 2021 at 10:21 AM Allan Streib via Mercedes <
mercedes@okiebenz.com> wrote:

> Looks nice, if you like red. Repaint? Guess it's a grey market: manual
> trans, manual windows, small bumpers, euro headlights. At least one dash
> crack visible.
>
>
> https://chicago.craigslist.org/chc/cto/d/chicago-mercedes-ce-2dr-owner-miles/7358946769.html
>
> Allan
> ___
> http://www.okiebenz.com
>
> To search list archives http://www.okiebenz.com/archive/
>
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>
>
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Today's crack or not crack: 1981 230CE Manual - 42k miles - $12, 950

2021-07-31 Thread Allan Streib via Mercedes
Looks nice, if you like red. Repaint? Guess it's a grey market: manual trans, 
manual windows, small bumpers, euro headlights. At least one dash crack visible.

https://chicago.craigslist.org/chc/cto/d/chicago-mercedes-ce-2dr-owner-miles/7358946769.html

Allan
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread dan penoff.com via Mercedes
Just off the cuff I would suspect it could run a couple of them without too 
much effort. You would need to determine what the code letter of the compressor 
motor is to get an accurate idea. This would apply especially if they don’t 
start simultaneously, which might be a bit much even for a 15kW unit, depending 
on what other loads are present. I would think it wouldn’t have much of a 
problem starting them one at a time.

-D

> On Jul 31, 2021, at 11:56 AM, Scott Ritchey via Mercedes 
>  wrote:
> 
> I know most generators can't run a conventional AC/Heat Pump because of the
> high compressor startup currents except (maybe) with a soft-start kit.
> 
> I wondered about mini-split systems.  These are smaller size and seem to
> "ramp up" in speed which seems like it should moderate the high start-up
> currents.  
> 
> The 12K BTU unit I installed in my barn only uses a 10 amp breaker and the
> equivalent 240v model is rated at only 5 amps per phase.
> 
> So I suspect my generator (15KW, 60 amp/phase) could run a couple of these
> mini-split heat pumps.  Does anyone know?  As I recall, Dan had expertise in
> this area (or am I thinking of someone else?).
> 
> Scott
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Generators and Mini-Splits, Anyone Know?

2021-07-31 Thread Scott Ritchey via Mercedes
I know most generators can't run a conventional AC/Heat Pump because of the
high compressor startup currents except (maybe) with a soft-start kit.

I wondered about mini-split systems.  These are smaller size and seem to
"ramp up" in speed which seems like it should moderate the high start-up
currents.  

The 12K BTU unit I installed in my barn only uses a 10 amp breaker and the
equivalent 240v model is rated at only 5 amps per phase.

So I suspect my generator (15KW, 60 amp/phase) could run a couple of these
mini-split heat pumps.  Does anyone know?  As I recall, Dan had expertise in
this area (or am I thinking of someone else?).

Scott

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] OT: 1950 Studebaker have to sell now want it gone

2021-07-31 Thread Curt Raymond via Mercedes
There was a Studebaker Champ on facespace the other day, not terribly rusted, 
they wanted $4k. I very nearly bit, I've been kind of scouting to find a truck 
to keep on the farm. I should have bought Kaleb's suburban.
Curt

Sent from Yahoo Mail on Android 
 
  On Fri, Jul 30, 2021 at 5:34 PM, Allan Streib via 
Mercedes wrote:   
https://bloomington.craigslist.org/cto/d/hemlock-studebaker-star-lite-coupe-1950/7358559954.html
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

  
___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] 24hr of Spa

2021-07-31 Thread Floyd Thursby via Mercedes

https://www.facebook.com/MercedesAMGMotorsport/

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] This would be lots of fun -- 09 Mercedes E63 AMG 510hp, Premium Loaded, Eurocharge tune, X pipe - $22, 500

2021-07-31 Thread Floyd Thursby via Mercedes

https://jacksonville.craigslist.org/cto/d/jacksonville-09-mercedes-e63-amg-510hp/7358495049.html

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] some lights on the display thats why low price 2003 Mercedes E500 - $2, 100

2021-07-31 Thread Floyd Thursby via Mercedes

Looks fairly nice

https://athensga.craigslist.org/cto/d/statham-2003-mercedes-e500/7358716655.html

--
--FT


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 2 wagons

2021-07-31 Thread dan penoff.com via Mercedes
The E500 is a “4Mati”, too! The driver’s seat looks pretty thrashed for only 
109k. Maybe the PO was a 500 pound gorilla? Otherwise, I pretty nice looking 
car.

-D

> On Jul 31, 2021, at 10:34 AM, Floyd Thursby via Mercedes 
>  wrote:
> 
> https://greenville.craigslist.org/ctd/d/greenville-2005-mercedes-benz-class-500/7358598636.html
> 
> https://greensboro.craigslist.org/ctd/d/greensboro-2005-mercedes-benz-e320/7358642245.html
> 
> -- 
> --FT
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] CL photos/ad of the week -- E320 - $3,500 (macon)

2021-07-31 Thread Floyd Thursby via Mercedes

https://macon.craigslist.org/cto/d/macon-e320/7358050727.html

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] 2 wagons

2021-07-31 Thread Max Dillon via Mercedes
Now if they were green, go buy a lottery ticket.

Max Dillon
Charleston SC


Jul 31, 2021 10:35:04 AM Floyd Thursby via Mercedes :

> https://greenville.craigslist.org/ctd/d/greenville-2005-mercedes-benz-class-500/7358598636.html
> 
> https://greensboro.craigslist.org/ctd/d/greensboro-2005-mercedes-benz-e320/7358642245.html
> 
> --
> --FT
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Decent? Price a little high -- 2005 Mercedes ML350 Good Shape! - $4, 995 (Lexington)

2021-07-31 Thread Floyd Thursby via Mercedes

https://winstonsalem.craigslist.org/cto/d/lexington-2005-mercedes-ml350-good-shape/7358138275.html

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] 2 wagons

2021-07-31 Thread Floyd Thursby via Mercedes

https://greenville.craigslist.org/ctd/d/greenville-2005-mercedes-benz-class-500/7358598636.html

https://greensboro.craigslist.org/ctd/d/greensboro-2005-mercedes-benz-e320/7358642245.html

--
--FT

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com