Re: [MBZ] Today's activity in the okie shop
Oh come on, whats a little oil in your paint? Keeps the car from rusting ;) -Curt On Monday, June 21, 2021, 12:46:33 PM EDT, Randy Bennell via Mercedes wrote: But don't plan to do any spray painting. On 20/06/2021 10:59 AM, Curt Raymond via Mercedes wrote: > Or just oil the heck out of it. ;) > Curt > > Sent from Yahoo Mail on Android > > On Sat, Jun 19, 2021 at 10:15 PM, Buggered Benzmail via >Mercedes wrote: Make sure you use a dehydrator or >dessicants or something like that so your pipes don’t rust > > —FT > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
But don't plan to do any spray painting. On 20/06/2021 10:59 AM, Curt Raymond via Mercedes wrote: Or just oil the heck out of it. ;) Curt Sent from Yahoo Mail on Android On Sat, Jun 19, 2021 at 10:15 PM, Buggered Benzmail via Mercedes wrote: Make sure you use a dehydrator or dessicants or something like that so your pipes don’t rust —FT ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Make sure you plan for drains to avoid rust. On 19/06/2021 8:28 PM, Kaleb Striplin via Mercedes wrote: I’m going to use iron pipe Sent from my iPhone On Jun 19, 2021, at 8:21 PM, OK Don via Mercedes wrote: Speaking of running air lines, what about using PEX for air lines??? ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
I wonder if an EMT electrical conduit bender would work, I have 1/2" and 3/4" benders. Their bender accomplishes the same thing, I bet an EMT bender would work. They also have tees and ells so I'm not sure how much bending might be required but I suppose there could be some. https://www.rapidairproducts.com/shop/maxline/maxline-tubing-bender-tool $166 is kinda spendy if you are just doing your shop --FT On 6/20/21 3:43 PM, OK Don via Mercedes wrote: Looks good, but the fine print: " To straighten the tubing, run it through our straightening tool, or use the bender tool to make precise angles. (Straightening and bending tools are sold separately. " On Sun, Jun 20, 2021 at 11:59 AM Rick Knoble via Mercedes < mercedes@okiebenz.com> wrote: Pretty good price, zero feedback seller though. 3/4". The big stuff. More than you need. I've never heard anyone say "my compressor is too big" or "I have too much money" so there's that. https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/393375899439 Rick Original Message Show Details From: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> Sent: June 20, 2021 11:09 AM To: curtlud...@yahoo.com<mailto:curtlud...@yahoo.com>; mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> Cc: okd...@gmail.com<mailto:okd...@gmail.com> Subject: Re: [MBZ] Today's activity in the okie shop Spray oil instead of paint! So Rapid Air has a wizard for your specific situation. With my 3.7HP compressor and a max line length of 75ft, they recommend the ½" MaxLine tubing. https://www.rapidairproducts.com/choose-a-system ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- --FT ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Looks good, but the fine print: " To straighten the tubing, run it through our straightening tool, or use the bender tool to make precise angles. (Straightening and bending tools are sold separately. " On Sun, Jun 20, 2021 at 11:59 AM Rick Knoble via Mercedes < mercedes@okiebenz.com> wrote: > Pretty good price, zero feedback seller though. 3/4". The big stuff. More > than you need. I've never heard anyone say "my compressor is too big" or "I > have too much money" so there's that. > > > https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/393375899439 > > > Rick > > > Original Message > > Show Details > From: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> > Sent: June 20, 2021 11:09 AM > To: curtlud...@yahoo.com<mailto:curtlud...@yahoo.com>; > mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> > Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> > Cc: okd...@gmail.com<mailto:okd...@gmail.com> > Subject: Re: [MBZ] Today's activity in the okie shop > > Spray oil instead of paint! > > So Rapid Air has a wizard for your specific situation. With my 3.7HP > compressor and a max line length of 75ft, they recommend the ½" MaxLine > tubing. > https://www.rapidairproducts.com/choose-a-system > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > -- OK Don "Whenever you find yourself on the side of the majority, it is time to pause and reflect." Mark Twain “Basic research is what I’m doing when I don’t know what I am doing.” Wernher Von Braun 2013 F150, 18 mpg 2017 Subaru Legacy, 30 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Pretty good price, zero feedback seller though. 3/4". The big stuff. More than you need. I've never heard anyone say "my compressor is too big" or "I have too much money" so there's that. https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/393375899439 Rick Original Message Show Details From: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> Sent: June 20, 2021 11:09 AM To: curtlud...@yahoo.com<mailto:curtlud...@yahoo.com>; mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> Reply-to: mercedes@okiebenz.com<mailto:mercedes@okiebenz.com> Cc: okd...@gmail.com<mailto:okd...@gmail.com> Subject: Re: [MBZ] Today's activity in the okie shop Spray oil instead of paint! So Rapid Air has a wizard for your specific situation. With my 3.7HP compressor and a max line length of 75ft, they recommend the ½" MaxLine tubing. https://www.rapidairproducts.com/choose-a-system ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Spray oil instead of paint! So Rapid Air has a wizard for your specific situation. With my 3.7HP compressor and a max line length of 75ft, they recommend the ½" MaxLine tubing. https://www.rapidairproducts.com/choose-a-system On Sun, Jun 20, 2021 at 10:59 AM Curt Raymond via Mercedes < mercedes@okiebenz.com> wrote: > Or just oil the heck out of it. ;) > Curt > > Sent from Yahoo Mail on Android > > On Sat, Jun 19, 2021 at 10:15 PM, Buggered Benzmail via Mercedes< > mercedes@okiebenz.com> wrote: Make sure you use a dehydrator or > dessicants or something like that so your pipes don’t rust > > —FT > > Sent from my iPad > > > On Jun 19, 2021, at 9:29 PM, Kaleb Striplin via Mercedes < > mercedes@okiebenz.com> wrote: > > > > I’m going to use iron pipe > > > > Sent from my iPhone > > > >> On Jun 19, 2021, at 8:21 PM, OK Don via Mercedes > wrote: > >> > >> Speaking of running air lines, what about using PEX for air lines??? > >> > >>> On Sat, Jun 19, 2021 at 2:36 PM Kaleb Striplin via Mercedes < > >>> mercedes@okiebenz.com> wrote: > >>> > >>> After replacing the suspension pump on the GL yesterday, today I messed > >>> with that current draw deal. No conclusions drawn as it seem to be > >>> behaving at the moment. I then pulled the 85 300CD out of the shop so > I > >>> could get the wrecked 97 E300 out. This 97 was the car that used to be > >>> my daily driver but wife was driving it and somehow managed to clip the > >>> back corner of a truck while on her phone I am sure. I have pulled the > >>> fender but the inner fender is bent a little and I would like to try > and > >>> pull it back out enough to get replacement fender bolted on. Anyway, > >>> its been sitting on the shop since 2018 on a HF viking 4 amp auto > >>> charger. It fired right up and AC even still blows ice cold. I pulled > >>> it out, cleaned up and moved some stuff around then pulled the CD back > >>> in where the E300 was parked. I then pulled the Duramax in so I could > >>> start replacing the injectors on it next week. It it still a bit > >>> crowded in front of the truck so I may end up pulling it back out, then > >>> pull the CD out and just pull it it back in the other shop door and > park > >>> it over there. That will give me plenty of room to work in front of > the > >>> truck. After all this is done, I plan I pulling most of the cars out, > >>> throwing all the trash away and organizing the rest, get my air lines > >>> ran around the shop, then get that 2 post drive on alignment lift going > >>> and install a 2 post lift, then move cars back in. Afterwards > hopefully > >>> all tools and parts will be organized and I can start getting some of > >>> these cars done and sold. > >>> > >>> > >>> ___ > >>> http://www.okiebenz.com > >>> > >>> To search list archives http://www.okiebenz.com/archive/ > >>> > >>> To Unsubscribe or change delivery options go to: > >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > >>> > >>> > >> > >> -- > >> OK Don > >> > >> "Whenever you find yourself on the side of the majority, it is time to > >> pause and reflect." Mark Twain > >> > >> “Basic research is what I’m doing when I don’t know what I am doing.” > Wernher > >> Von Braun > >> 2013 F150, 18 mpg > >> 2017 Subaru Legacy, 30 mpg > >> 1957 C182A, 12 mpg - but at 150 mph! > >> ___ > >> http://www.okiebenz.com > >> > >> To search list archives http://www.okiebenz.com/archive/ > >> > >> To Unsubscribe or change delivery options go to: > >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > >> > > > > > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > -- OK Don "Whenever you find yourself on the side of the majority, it is time to pause and reflect." Mark Twain “Basic research is what I’m doing when I don’t know what I am doing.” Wernher Von Braun 2013 F150, 18 mpg 2017 Subaru Legacy, 30 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Or just oil the heck out of it. ;) Curt Sent from Yahoo Mail on Android On Sat, Jun 19, 2021 at 10:15 PM, Buggered Benzmail via Mercedes wrote: Make sure you use a dehydrator or dessicants or something like that so your pipes don’t rust —FT Sent from my iPad > On Jun 19, 2021, at 9:29 PM, Kaleb Striplin via Mercedes > wrote: > > I’m going to use iron pipe > > Sent from my iPhone > >> On Jun 19, 2021, at 8:21 PM, OK Don via Mercedes >> wrote: >> >> Speaking of running air lines, what about using PEX for air lines??? >> >>> On Sat, Jun 19, 2021 at 2:36 PM Kaleb Striplin via Mercedes < >>> mercedes@okiebenz.com> wrote: >>> >>> After replacing the suspension pump on the GL yesterday, today I messed >>> with that current draw deal. No conclusions drawn as it seem to be >>> behaving at the moment. I then pulled the 85 300CD out of the shop so I >>> could get the wrecked 97 E300 out. This 97 was the car that used to be >>> my daily driver but wife was driving it and somehow managed to clip the >>> back corner of a truck while on her phone I am sure. I have pulled the >>> fender but the inner fender is bent a little and I would like to try and >>> pull it back out enough to get replacement fender bolted on. Anyway, >>> its been sitting on the shop since 2018 on a HF viking 4 amp auto >>> charger. It fired right up and AC even still blows ice cold. I pulled >>> it out, cleaned up and moved some stuff around then pulled the CD back >>> in where the E300 was parked. I then pulled the Duramax in so I could >>> start replacing the injectors on it next week. It it still a bit >>> crowded in front of the truck so I may end up pulling it back out, then >>> pull the CD out and just pull it it back in the other shop door and park >>> it over there. That will give me plenty of room to work in front of the >>> truck. After all this is done, I plan I pulling most of the cars out, >>> throwing all the trash away and organizing the rest, get my air lines >>> ran around the shop, then get that 2 post drive on alignment lift going >>> and install a 2 post lift, then move cars back in. Afterwards hopefully >>> all tools and parts will be organized and I can start getting some of >>> these cars done and sold. >>> >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> >> >> -- >> OK Don >> >> "Whenever you find yourself on the side of the majority, it is time to >> pause and reflect." Mark Twain >> >> “Basic research is what I’m doing when I don’t know what I am doing.” >> Wernher >> Von Braun >> 2013 F150, 18 mpg >> 2017 Subaru Legacy, 30 mpg >> 1957 C182A, 12 mpg - but at 150 mph! >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
It does, and the prices are a lot less than I saw when I first went looking for the "correct" way to plumb compressed air On Sun, Jun 20, 2021 at 10:34 AM Floyd Thursby via Mercedes < mercedes@okiebenz.com> wrote: > I remember seeing on one of those cable car shows some years ago the guy > was installing this anodized aluminum pipe with push-on fittings for air > distribution. The stuff was lightweight and looked pretty easy to set > up. This plastic stuff looks similar but flexible. Looks like a great > solution. > > --FT > > On 6/20/21 11:18 AM, Rick Knoble via Mercedes wrote: > > I thought about galvanized pipe. If I put pipe that means threading > pipe, pipe dope or tape, hangers, holding ten foot sections of pipe over my > head with a sore shoulder, etc. Screw that. I can buy all the supplies, > look at it and get overwhelmed, or I can buy this maxline crap and put it > up and be done. Will it look perfect? Probably not. Will it be done? Yep. > And that's what counts. > > > > Here's a link to the manufacturer page. > > > > https://www.rapidairproducts.com/ > > > > > > Rick > > > > From: mercedes@okiebenz.com > > Sent: June 20, 2021 9:58 AM > > To: mercedes@okiebenz.com > > Reply-to: mercedes@okiebenz.com > > Cc: ka...@striplin.net > > Subject: Re: [MBZ] Today's activity in the okie shop > > > > Interesting. I may have to get one of these although I could probably > have to buy 2 of them. I already have a bunch of iron pipe with valves etc > that I pulled out of my buddies shop when he was selling his out. This > seems like it would be a lot easier though. > > > > Sent from my iPhone > > > >> On Jun 20, 2021, at 9:53 AM, Rick Knoble via Mercedes < > mercedes@okiebenz.com<mailto:mercedes@okiebenz.com>> wrote: > >> > >> > >>> Do these have a way to drain each station? > >> Yeah. If you look at the outlets, each of them has a drain cock at the > bottom. I found this after I posted the other links. It is a pretty good > deal. 3/4" kit. > >> > >> > https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/234030925866 > >> > >> Rick > > ___ > > http://www.okiebenz.com > > > > To search list archives http://www.okiebenz.com/archive/ > > > > To Unsubscribe or change delivery options go to: > > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > > -- > --FT > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > -- OK Don "Whenever you find yourself on the side of the majority, it is time to pause and reflect." Mark Twain “Basic research is what I’m doing when I don’t know what I am doing.” Wernher Von Braun 2013 F150, 18 mpg 2017 Subaru Legacy, 30 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
I remember seeing on one of those cable car shows some years ago the guy was installing this anodized aluminum pipe with push-on fittings for air distribution. The stuff was lightweight and looked pretty easy to set up. This plastic stuff looks similar but flexible. Looks like a great solution. --FT On 6/20/21 11:18 AM, Rick Knoble via Mercedes wrote: I thought about galvanized pipe. If I put pipe that means threading pipe, pipe dope or tape, hangers, holding ten foot sections of pipe over my head with a sore shoulder, etc. Screw that. I can buy all the supplies, look at it and get overwhelmed, or I can buy this maxline crap and put it up and be done. Will it look perfect? Probably not. Will it be done? Yep. And that's what counts. Here's a link to the manufacturer page. https://www.rapidairproducts.com/ Rick From: mercedes@okiebenz.com Sent: June 20, 2021 9:58 AM To: mercedes@okiebenz.com Reply-to: mercedes@okiebenz.com Cc: ka...@striplin.net Subject: Re: [MBZ] Today's activity in the okie shop Interesting. I may have to get one of these although I could probably have to buy 2 of them. I already have a bunch of iron pipe with valves etc that I pulled out of my buddies shop when he was selling his out. This seems like it would be a lot easier though. Sent from my iPhone On Jun 20, 2021, at 9:53 AM, Rick Knoble via Mercedes mailto:mercedes@okiebenz.com>> wrote: Do these have a way to drain each station? Yeah. If you look at the outlets, each of them has a drain cock at the bottom. I found this after I posted the other links. It is a pretty good deal. 3/4" kit. https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/234030925866 Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com -- --FT ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Thanks - mine is PVC and 30 to 40 years old now. I'm wondering when it's going to explode, and where I'll be standing when it does. However, it's working so it doesn't feel good to spend several thousand to replace it when I can spend that money on airplane parts ... On Sat, Jun 19, 2021 at 11:52 PM Rick Knoble via Mercedes < mercedes@okiebenz.com> wrote: > > Speaking of running air lines, what about using PEX for air lines??? > > > Pex *may* work, but what you want is Pex-Al-Pex which is pex lined with > aluminum somehow. > > This kit looks like the best compromise between price and flow. It has a > 1/2" ID, so it should flow well. > > > https://www.ebay.com/itm/Rapid-Air-Maxline-100-M3800-1-2-Compressed-Air-Line-Piping-Tubing-Shop-System-/194202157512 > > The Rapidair 1/2 system is cheaper (same company), but has an OD of 1/2" > and an ID of like 3/8". It would probably be fine for airing up tires and > light air tools, but to get the most umph out of an impact bigger is better. > > > https://www.ebay.com/itm/MaxLine-90500-100-Foot-1-2-O-D-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-/352915008198 > > Rick > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > -- OK Don "Whenever you find yourself on the side of the majority, it is time to pause and reflect." Mark Twain “Basic research is what I’m doing when I don’t know what I am doing.” Wernher Von Braun 2013 F150, 18 mpg 2017 Subaru Legacy, 30 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
I thought about galvanized pipe. If I put pipe that means threading pipe, pipe dope or tape, hangers, holding ten foot sections of pipe over my head with a sore shoulder, etc. Screw that. I can buy all the supplies, look at it and get overwhelmed, or I can buy this maxline crap and put it up and be done. Will it look perfect? Probably not. Will it be done? Yep. And that's what counts. Here's a link to the manufacturer page. https://www.rapidairproducts.com/ Rick From: mercedes@okiebenz.com Sent: June 20, 2021 9:58 AM To: mercedes@okiebenz.com Reply-to: mercedes@okiebenz.com Cc: ka...@striplin.net Subject: Re: [MBZ] Today's activity in the okie shop Interesting. I may have to get one of these although I could probably have to buy 2 of them. I already have a bunch of iron pipe with valves etc that I pulled out of my buddies shop when he was selling his out. This seems like it would be a lot easier though. Sent from my iPhone > On Jun 20, 2021, at 9:53 AM, Rick Knoble via Mercedes > mailto:mercedes@okiebenz.com>> wrote: > > >> Do these have a way to drain each station? > > Yeah. If you look at the outlets, each of them has a drain cock at the > bottom. I found this after I posted the other links. It is a pretty good > deal. 3/4" kit. > > https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/234030925866 > > Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Interesting. I may have to get one of these although I could probably have to buy 2 of them. I already have a bunch of iron pipe with valves etc that I pulled out of my buddies shop when he was selling his out. This seems like it would be a lot easier though. Sent from my iPhone > On Jun 20, 2021, at 9:53 AM, Rick Knoble via Mercedes > wrote: > > >> Do these have a way to drain each station? > > Yeah. If you look at the outlets, each of them has a drain cock at the > bottom. I found this after I posted the other links. It is a pretty good > deal. 3/4" kit. > > https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/234030925866 > > Rick > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
> Do these have a way to drain each station? Yeah. If you look at the outlets, each of them has a drain cock at the bottom. I found this after I posted the other links. It is a pretty good deal. 3/4" kit. https://www.ebay.com/itm/MaxLine-100-Foot-3-4-Inch-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-Blue-/234030925866 Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Or you just put a drip leg in with a cap that you can remove occasionally to drain any moisture. Easier and cheaper. -D > On Jun 20, 2021, at 10:46 AM, Kaleb Striplin via Mercedes > wrote: > > Do these have a way to drain each station? Typically when you use pipe at > each vertical drop you have your valve for your air connection then below > that you have a drain valve to drain any water that falls in there. > > Sent from my iPhone > >> On Jun 19, 2021, at 11:52 PM, Rick Knoble via Mercedes >> wrote: >> >> >>> >>> Speaking of running air lines, what about using PEX for air lines??? >> >> >> Pex *may* work, but what you want is Pex-Al-Pex which is pex lined with >> aluminum somehow. >> >> This kit looks like the best compromise between price and flow. It has a >> 1/2" ID, so it should flow well. >> >> https://www.ebay.com/itm/Rapid-Air-Maxline-100-M3800-1-2-Compressed-Air-Line-Piping-Tubing-Shop-System-/194202157512 >> >> The Rapidair 1/2 system is cheaper (same company), but has an OD of 1/2" and >> an ID of like 3/8". It would probably be fine for airing up tires and light >> air tools, but to get the most umph out of an impact bigger is better. >> >> https://www.ebay.com/itm/MaxLine-90500-100-Foot-1-2-O-D-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-/352915008198 >> >> Rick >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Do these have a way to drain each station? Typically when you use pipe at each vertical drop you have your valve for your air connection then below that you have a drain valve to drain any water that falls in there. Sent from my iPhone > On Jun 19, 2021, at 11:52 PM, Rick Knoble via Mercedes > wrote: > > >> >> Speaking of running air lines, what about using PEX for air lines??? > > > Pex *may* work, but what you want is Pex-Al-Pex which is pex lined with > aluminum somehow. > > This kit looks like the best compromise between price and flow. It has a 1/2" > ID, so it should flow well. > > https://www.ebay.com/itm/Rapid-Air-Maxline-100-M3800-1-2-Compressed-Air-Line-Piping-Tubing-Shop-System-/194202157512 > > The Rapidair 1/2 system is cheaper (same company), but has an OD of 1/2" and > an ID of like 3/8". It would probably be fine for airing up tires and light > air tools, but to get the most umph out of an impact bigger is better. > > https://www.ebay.com/itm/MaxLine-90500-100-Foot-1-2-O-D-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-/352915008198 > > Rick > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
> Speaking of running air lines, what about using PEX for air lines??? Pex *may* work, but what you want is Pex-Al-Pex which is pex lined with aluminum somehow. This kit looks like the best compromise between price and flow. It has a 1/2" ID, so it should flow well. https://www.ebay.com/itm/Rapid-Air-Maxline-100-M3800-1-2-Compressed-Air-Line-Piping-Tubing-Shop-System-/194202157512 The Rapidair 1/2 system is cheaper (same company), but has an OD of 1/2" and an ID of like 3/8". It would probably be fine for airing up tires and light air tools, but to get the most umph out of an impact bigger is better. https://www.ebay.com/itm/MaxLine-90500-100-Foot-1-2-O-D-Semi-Flexible-Compressed-Air-Tubing-Master-Kit-/352915008198 Rick ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Make sure you use a dehydrator or dessicants or something like that so your pipes don’t rust —FT Sent from my iPad > On Jun 19, 2021, at 9:29 PM, Kaleb Striplin via Mercedes > wrote: > > I’m going to use iron pipe > > Sent from my iPhone > >> On Jun 19, 2021, at 8:21 PM, OK Don via Mercedes >> wrote: >> >> Speaking of running air lines, what about using PEX for air lines??? >> >>> On Sat, Jun 19, 2021 at 2:36 PM Kaleb Striplin via Mercedes < >>> mercedes@okiebenz.com> wrote: >>> >>> After replacing the suspension pump on the GL yesterday, today I messed >>> with that current draw deal. No conclusions drawn as it seem to be >>> behaving at the moment. I then pulled the 85 300CD out of the shop so I >>> could get the wrecked 97 E300 out. This 97 was the car that used to be >>> my daily driver but wife was driving it and somehow managed to clip the >>> back corner of a truck while on her phone I am sure. I have pulled the >>> fender but the inner fender is bent a little and I would like to try and >>> pull it back out enough to get replacement fender bolted on. Anyway, >>> its been sitting on the shop since 2018 on a HF viking 4 amp auto >>> charger. It fired right up and AC even still blows ice cold. I pulled >>> it out, cleaned up and moved some stuff around then pulled the CD back >>> in where the E300 was parked. I then pulled the Duramax in so I could >>> start replacing the injectors on it next week. It it still a bit >>> crowded in front of the truck so I may end up pulling it back out, then >>> pull the CD out and just pull it it back in the other shop door and park >>> it over there. That will give me plenty of room to work in front of the >>> truck. After all this is done, I plan I pulling most of the cars out, >>> throwing all the trash away and organizing the rest, get my air lines >>> ran around the shop, then get that 2 post drive on alignment lift going >>> and install a 2 post lift, then move cars back in. Afterwards hopefully >>> all tools and parts will be organized and I can start getting some of >>> these cars done and sold. >>> >>> >>> ___ >>> http://www.okiebenz.com >>> >>> To search list archives http://www.okiebenz.com/archive/ >>> >>> To Unsubscribe or change delivery options go to: >>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >>> >>> >> >> -- >> OK Don >> >> "Whenever you find yourself on the side of the majority, it is time to >> pause and reflect." Mark Twain >> >> “Basic research is what I’m doing when I don’t know what I am doing.” >> Wernher >> Von Braun >> 2013 F150, 18 mpg >> 2017 Subaru Legacy, 30 mpg >> 1957 C182A, 12 mpg - but at 150 mph! >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
I’m going to use iron pipe Sent from my iPhone > On Jun 19, 2021, at 8:21 PM, OK Don via Mercedes > wrote: > > Speaking of running air lines, what about using PEX for air lines??? > >> On Sat, Jun 19, 2021 at 2:36 PM Kaleb Striplin via Mercedes < >> mercedes@okiebenz.com> wrote: >> >> After replacing the suspension pump on the GL yesterday, today I messed >> with that current draw deal. No conclusions drawn as it seem to be >> behaving at the moment. I then pulled the 85 300CD out of the shop so I >> could get the wrecked 97 E300 out. This 97 was the car that used to be >> my daily driver but wife was driving it and somehow managed to clip the >> back corner of a truck while on her phone I am sure. I have pulled the >> fender but the inner fender is bent a little and I would like to try and >> pull it back out enough to get replacement fender bolted on. Anyway, >> its been sitting on the shop since 2018 on a HF viking 4 amp auto >> charger. It fired right up and AC even still blows ice cold. I pulled >> it out, cleaned up and moved some stuff around then pulled the CD back >> in where the E300 was parked. I then pulled the Duramax in so I could >> start replacing the injectors on it next week. It it still a bit >> crowded in front of the truck so I may end up pulling it back out, then >> pull the CD out and just pull it it back in the other shop door and park >> it over there. That will give me plenty of room to work in front of the >> truck. After all this is done, I plan I pulling most of the cars out, >> throwing all the trash away and organizing the rest, get my air lines >> ran around the shop, then get that 2 post drive on alignment lift going >> and install a 2 post lift, then move cars back in. Afterwards hopefully >> all tools and parts will be organized and I can start getting some of >> these cars done and sold. >> >> >> ___ >> http://www.okiebenz.com >> >> To search list archives http://www.okiebenz.com/archive/ >> >> To Unsubscribe or change delivery options go to: >> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com >> >> > > -- > OK Don > > "Whenever you find yourself on the side of the majority, it is time to > pause and reflect." Mark Twain > > “Basic research is what I’m doing when I don’t know what I am doing.” Wernher > Von Braun > 2013 F150, 18 mpg > 2017 Subaru Legacy, 30 mpg > 1957 C182A, 12 mpg - but at 150 mph! > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Speaking of running air lines, what about using PEX for air lines??? On Sat, Jun 19, 2021 at 2:36 PM Kaleb Striplin via Mercedes < mercedes@okiebenz.com> wrote: > After replacing the suspension pump on the GL yesterday, today I messed > with that current draw deal. No conclusions drawn as it seem to be > behaving at the moment. I then pulled the 85 300CD out of the shop so I > could get the wrecked 97 E300 out. This 97 was the car that used to be > my daily driver but wife was driving it and somehow managed to clip the > back corner of a truck while on her phone I am sure. I have pulled the > fender but the inner fender is bent a little and I would like to try and > pull it back out enough to get replacement fender bolted on. Anyway, > its been sitting on the shop since 2018 on a HF viking 4 amp auto > charger. It fired right up and AC even still blows ice cold. I pulled > it out, cleaned up and moved some stuff around then pulled the CD back > in where the E300 was parked. I then pulled the Duramax in so I could > start replacing the injectors on it next week. It it still a bit > crowded in front of the truck so I may end up pulling it back out, then > pull the CD out and just pull it it back in the other shop door and park > it over there. That will give me plenty of room to work in front of the > truck. After all this is done, I plan I pulling most of the cars out, > throwing all the trash away and organizing the rest, get my air lines > ran around the shop, then get that 2 post drive on alignment lift going > and install a 2 post lift, then move cars back in. Afterwards hopefully > all tools and parts will be organized and I can start getting some of > these cars done and sold. > > > ___ > http://www.okiebenz.com > > To search list archives http://www.okiebenz.com/archive/ > > To Unsubscribe or change delivery options go to: > http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com > > -- OK Don "Whenever you find yourself on the side of the majority, it is time to pause and reflect." Mark Twain “Basic research is what I’m doing when I don’t know what I am doing.” Wernher Von Braun 2013 F150, 18 mpg 2017 Subaru Legacy, 30 mpg 1957 C182A, 12 mpg - but at 150 mph! ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
Re: [MBZ] Today's activity in the okie shop
Sounds like a plan. Progress is always good. Rick From: mercedes@okiebenz.com Sent: June 19, 2021 2:36 PM To: mercedes@okiebenz.com; davesl...@okiebenz.com Reply-to: mercedes@okiebenz.com Cc: ka...@striplin.net Subject: [MBZ] Today's activity in the okie shop After replacing the suspension pump on the GL yesterday, today I messed with that current draw deal. No conclusions drawn as it seem to be behaving at the moment. I then pulled the 85 300CD out of the shop so I could get the wrecked 97 E300 out. This 97 was the car that used to be my daily driver but wife was driving it and somehow managed to clip the back corner of a truck while on her phone I am sure. I have pulled the fender but the inner fender is bent a little and I would like to try and pull it back out enough to get replacement fender bolted on. Anyway, its been sitting on the shop since 2018 on a HF viking 4 amp auto charger. It fired right up and AC even still blows ice cold. I pulled it out, cleaned up and moved some stuff around then pulled the CD back in where the E300 was parked. I then pulled the Duramax in so I could start replacing the injectors on it next week. It it still a bit crowded in front of the truck so I may end up pulling it back out, then pull the CD out and just pull it it back in the other shop door and park it over there. That will give me plenty of room to work in front of the truck. After all this is done, I plan I pulling most of the cars out, throwing all the trash away and organizing the rest, get my air lines ran around the shop, then get that 2 post drive on alignment lift going and install a 2 post lift, then move cars back in. Afterwards hopefully all tools and parts will be organized and I can start getting some of these cars done and sold. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
[MBZ] Today's activity in the okie shop
After replacing the suspension pump on the GL yesterday, today I messed with that current draw deal. No conclusions drawn as it seem to be behaving at the moment. I then pulled the 85 300CD out of the shop so I could get the wrecked 97 E300 out. This 97 was the car that used to be my daily driver but wife was driving it and somehow managed to clip the back corner of a truck while on her phone I am sure. I have pulled the fender but the inner fender is bent a little and I would like to try and pull it back out enough to get replacement fender bolted on. Anyway, its been sitting on the shop since 2018 on a HF viking 4 amp auto charger. It fired right up and AC even still blows ice cold. I pulled it out, cleaned up and moved some stuff around then pulled the CD back in where the E300 was parked. I then pulled the Duramax in so I could start replacing the injectors on it next week. It it still a bit crowded in front of the truck so I may end up pulling it back out, then pull the CD out and just pull it it back in the other shop door and park it over there. That will give me plenty of room to work in front of the truck. After all this is done, I plan I pulling most of the cars out, throwing all the trash away and organizing the rest, get my air lines ran around the shop, then get that 2 post drive on alignment lift going and install a 2 post lift, then move cars back in. Afterwards hopefully all tools and parts will be organized and I can start getting some of these cars done and sold. ___ http://www.okiebenz.com To search list archives http://www.okiebenz.com/archive/ To Unsubscribe or change delivery options go to: http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com