Re: [OpenWrt-Devel] raspberry pi v3.19
Yeah I had already reverted that change locally. I was going to send all the patches once I had tested everything for the Raspberry Pi 2, but you were faster :P. El 11/02/2015 a las 11:11, John Crispin escribió: On 10/02/2015 19:53, Álvaro Fernández Rojas wrote: Okay, it's working now: http://files.noltari.es/openwrt/bcm2708/bcm2708_3-18_log.txt Patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz i changed the gpu-fw package to not clone the huge git tree every time, it killed me 8/1 adsl line ;) ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
The pins you said are the right ones. However, if anything fails before the kernel is booted you won't get any output. You could try booting a 3.14 image and check if you are properly connected to the uart. It may be some wrong configuration related to the recently added DT support, which expects a DTB and since no DTB is passed from the bootloader, the kernel crashes before any output. El 10/2/2015, a las 6:29, John Crispin blo...@openwrt.org escribió: ok, so uart, how do you connect it ? On 10/02/2015 02:02, Álvaro Fernández Rojas wrote: I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions: http://pastebin.com/GWFYrXnT My patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz Regards, Álvaro. El 09/02/2015 a las 18:12, Florian Fainelli escribió: On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org mailto:blo...@openwrt.org wrote: Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use). Could you share the boot log to see if there is anything obvious? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org mailto:openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
I could finally boot 3.18 by loading the rootfs from USB: http://pastebin.com/b4dX0X7B Everything seems to be working fine, still no clue about the SD issues... http://pastebin.com/G61ALvLX El 10/02/2015 a las 11:09, Álvaro Fernández Rojas escribió: The pins you said are the right ones. However, if anything fails before the kernel is booted you won't get any output. You could try booting a 3.14 image and check if you are properly connected to the uart. It may be some wrong configuration related to the recently added DT support, which expects a DTB and since no DTB is passed from the bootloader, the kernel crashes before any output. El 10/2/2015, a las 6:29, John Crispin blo...@openwrt.org escribió: ok, so uart, how do you connect it ? On 10/02/2015 02:02, Álvaro Fernández Rojas wrote: I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions: http://pastebin.com/GWFYrXnT My patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz Regards, Álvaro. El 09/02/2015 a las 18:12, Florian Fainelli escribió: On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org mailto:blo...@openwrt.org wrote: Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use). Could you share the boot log to see if there is anything obvious? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org mailto:openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
On 10/02/2015 20:16, Álvaro Fernández Rojas wrote: It's based on https://github.com/raspberrypi/linux/tree/rpi-3.18.y-rebase oh goddie, i wonder what i did wrong when trying the same ones. BTW, I'm also trying to get the Raspberry Pi 2 working before sending the patches. amazon wont ship mine till the 13th, so i wont be able to play with it till start of next week. patches welcome, as always ;) El 10/02/2015 a las 20:02, John Crispin escribió: On 10/02/2015 19:53, Álvaro Fernández Rojas wrote: Okay, it's working now: http://files.noltari.es/openwrt/bcm2708/bcm2708_3-18_log.txt Patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz :-) one less todo off my list. just merged it locally and started a test build. which patches is this series based on ? i tried to make the ~150 patches from the rpi repo on github work in the hope that they would also make the rpi2 work with openwrt. thanks, John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
On 10/02/2015 19:53, Álvaro Fernández Rojas wrote: Okay, it's working now: http://files.noltari.es/openwrt/bcm2708/bcm2708_3-18_log.txt Patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz :-) one less todo off my list. just merged it locally and started a test build. which patches is this series based on ? i tried to make the ~150 patches from the rpi repo on github work in the hope that they would also make the rpi2 work with openwrt. thanks, John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
Okay, it's working now: http://files.noltari.es/openwrt/bcm2708/bcm2708_3-18_log.txt Patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz El 10/02/2015 a las 13:10, Álvaro Fernández Rojas escribió: I could finally boot 3.18 by loading the rootfs from USB: http://pastebin.com/b4dX0X7B Everything seems to be working fine, still no clue about the SD issues... http://pastebin.com/G61ALvLX El 10/02/2015 a las 11:09, Álvaro Fernández Rojas escribió: The pins you said are the right ones. However, if anything fails before the kernel is booted you won't get any output. You could try booting a 3.14 image and check if you are properly connected to the uart. It may be some wrong configuration related to the recently added DT support, which expects a DTB and since no DTB is passed from the bootloader, the kernel crashes before any output. El 10/2/2015, a las 6:29, John Crispin blo...@openwrt.org escribió: ok, so uart, how do you connect it ? On 10/02/2015 02:02, Álvaro Fernández Rojas wrote: I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions: http://pastebin.com/GWFYrXnT My patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz Regards, Álvaro. El 09/02/2015 a las 18:12, Florian Fainelli escribió: On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org mailto:blo...@openwrt.org wrote: Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use). Could you share the boot log to see if there is anything obvious? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org mailto:openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
It's based on https://github.com/raspberrypi/linux/tree/rpi-3.18.y-rebase BTW, I'm also trying to get the Raspberry Pi 2 working before sending the patches. El 10/02/2015 a las 20:02, John Crispin escribió: On 10/02/2015 19:53, Álvaro Fernández Rojas wrote: Okay, it's working now: http://files.noltari.es/openwrt/bcm2708/bcm2708_3-18_log.txt Patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz :-) one less todo off my list. just merged it locally and started a test build. which patches is this series based on ? i tried to make the ~150 patches from the rpi repo on github work in the hope that they would also make the rpi2 work with openwrt. thanks, John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org wrote: Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use). Could you share the boot log to see if there is anything obvious? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
On 09/02/2015 18:12, Florian Fainelli wrote: Could you share the boot log to see if there is anything obvious? Hi, without uart i get no bootlog. i just see the coloured palette on the hdmi. but the uart stays quiet. i am starting to wonder if the uart is dead. John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions: http://pastebin.com/GWFYrXnT My patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz Regards, Álvaro. El 09/02/2015 a las 18:12, Florian Fainelli escribió: On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org mailto:blo...@openwrt.org wrote: Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use). Could you share the boot log to see if there is anything obvious? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org mailto:openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] raspberry pi v3.19
Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card ? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] raspberry pi v3.19
ok, so uart, how do you connect it ? On 10/02/2015 02:02, Álvaro Fernández Rojas wrote: I tried adding support for 3.18 and I have issues booting the raspberry. There must be something wrong with the new mmc driver, because it detects the SD card insertions/extractiones, but doesn't read the partitions: http://pastebin.com/GWFYrXnT My patches: http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz Regards, Álvaro. El 09/02/2015 a las 18:12, Florian Fainelli escribió: On Feb 9, 2015 4:25 AM, John Crispin blo...@openwrt.org mailto:blo...@openwrt.org wrote: Hi, i synced our rpi port with the upstream tree on github. it boots and i can see the coloured palette test pic on the hdmi, however ethernet fails to come up. i attached a uart just to find out that my rpi is either broken or i am connecting it wrong. has anyone managed to get uart working ? to my understanding i need to connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see output from the bootloader prior to board detecting/loading the sd card You will not get any UART output prior to the kernel boot, the GPU boot code does not output anything (at least not in the builds we use). Could you share the boot log to see if there is anything obvious? John ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org mailto:openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel