[speedtouch] Re: Fedora Core 2 Test 3 Issues (2.6.5 kernel)
Hi all, William M. Quarles wrote: Aad Rijnberg wrote: [snip] Then try to make. If you get an error on the make, do a make clean, re-./configure. You will most likely fail on the linux-atm or ppp. If that's the case, you don't really need linux-atm (someone correct me if I'm wrong; if I'm right, i would suggest leaving it out anyways, I think this unnecessarily writes over stuff in your existing kernel), Like duncan said earlier, you need a pppoa aware pppd daemon. In order to have this, you need to compile linux-atm and pppd present in the speedbundle package. But, you are right, It won't compile with the default FC2 install. It will complain about a function called billi_in_use or something like that. It's because the include files of the kernel present in /usr/include/linux are too old (They should come from the kernel installed when the fedora folks compiled all the system, which is the behavior that linus torvalds advices). To work this around, you should (re)move all atm*.h file in /usr/include/linux and replace them with those present in the 2.6.5 kernel sources. After that, all works for me except that modem_run failed at the end of its initialization because of the bug in the kernel. With the kernel patches given by duncan, I think it should allow us to use the kernel driver with FC2. Best regards, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Fedora Core 2 Test 3 Issues (2.6.5 kernel) =G
Hi all, My adsl connexion on my brand new FC2 installation comes back this morning, thanks to all of you on this list ! So, for all the guys that didn't manage to connect yet, here are some RPM I made to make speedtouch green manta modem works (and maybe others) on your FC2 http://grumz.dyndns.org/ADSL_FC2/ maybe somebody can mirror this link on a server with a larger bandwidth than my adsl connexion, in order more people can access it. For the solution, I recompile the kernel of redhat with the patches duncan gave us 2 days ago + all the missing config options (ATM, pppoa, speedtouch), I compile linux-atm, pppd with the pppoa patch find on http://www.linux-usb.org/SpeedTouch and modem_run of Benoit papillault (speedtouch-1.2 package). After you install the above packages, you need to configure you pap/chap-secret files and put your username and vci.vpi in the /etc/ppp/peers/speedtch file installed by the speedtouch package. and then you plug your modem and start your connection with : service adsl start you can add in your crontab a script to check your connection : */5 * * * * root /usr/sbin/check_adsl.sh And that's all folks ! Thanks again for your help and I hope my contribution will help ! Best regards, Fred RUAUDEL Frédéric wrote: Hi all, William M. Quarles wrote: Aad Rijnberg wrote: [snip] Then try to make. If you get an error on the make, do a make clean, re-./configure. You will most likely fail on the linux-atm or ppp. If that's the case, you don't really need linux-atm (someone correct me if I'm wrong; if I'm right, i would suggest leaving it out anyways, I think this unnecessarily writes over stuff in your existing kernel), Like duncan said earlier, you need a pppoa aware pppd daemon. In order to have this, you need to compile linux-atm and pppd present in the speedbundle package. But, you are right, It won't compile with the default FC2 install. It will complain about a function called billi_in_use or something like that. It's because the include files of the kernel present in /usr/include/linux are too old (They should come from the kernel installed when the fedora folks compiled all the system, which is the behavior that linus torvalds advices). To work this around, you should (re)move all atm*.h file in /usr/include/linux and replace them with those present in the 2.6.5 kernel sources. After that, all works for me except that modem_run failed at the end of its initialization because of the bug in the kernel. With the kernel patches given by duncan, I think it should allow us to use the kernel driver with FC2. Best regards, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: FC2 silver modem
The easiest is my solution because it only consist of doing rpm -[iU]vh blabla and set your account information. And it should work without problem. But if you want to understand all the process or if my solution doesn't work, you can do it manually as Aad explained, but it's a long and time consuming task ;o) I remember the address of my RPMS : http://grumz.dyndns.org/ADSL_FC2/ be carefully to not upgrade the kernel. For all package you can install them with rpm -Uvh, but for the kernel use rpm -ivh to avoid removing the old working one in case mine will not work. If you want the patches, I remember their url to you : http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a3f5KlccssYr19NecU0kkO1N6g?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a40f3cg3ZSEt1EnA8VSuVQiqUw?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a440FSnf2li3HyKVGxT6N27eZw?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a45aD7_IpRHlvUZN-pVfL3sCOA?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a4723YKm1lsWMJiMcgsDihjQ4g?nav=index.html|ChangeSet__AT__-4w http://linux.bkbits.net:8080/linux-2.5/cset__AT__4089a48f-sHxeV98SkZrgyNs2vZywA?nav=index.html|ChangeSet__AT__-4w *Don't forget* to replace __AT__ by the at sign @ Best Regards, Fred Maurizio Rosetti wrote: Hi everybody, I'm a newcomer to this list and to both Linux and usb modems, although I have been an unix user since many years on an intranet network. I'd like to get my silver speedtouch 330 modem work on Fedora Core 2. In the mailing list archive I see two solutions, one by Frederic Ruaudel and the other by Aad Rijnberg. My inexperience doesn't allow me to tell the difference. Moreover, as my subscription is very recent, I can't have access to the Duncan's patches indicated by Aad Rijnberg; in the archive they result protected. My ISP uses PPPoA and PPPoverATM. I'd appreciate your advice about how to proceed. Thanks, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: FC2 silver modem
Yes, you should preferably use the command 'service adsl start' The script check_adsl.sh is useful to test that your connection is alive in case the 'persist' option in the pppd speedtch file doesn't work (it happens sometimes for me), especially when your provider stop the connexion every 24h (I don't know if it is the case where you live). This script pings some well known site and if all fails, it considers that the connexion is down and relaunch pppd and only pppd. Because in the case where the modem is in a bad state, you should likely unplug and replug your modem before the connexion can restart (I don't know if it is a bug of the modem or if it is a bug/feature of USB). (I have a green manta speedtouch modem for info) If you don't want to use the service command, you can use the script start_adsl.sh which is called by the init script. Regards, Fred Duncan Sands wrote: Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable This means that the firmware has not been loaded into the modem. Ciao, Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: FC2 silver modem
Here a some more details. It doesn't happen since I installed my new FC2 so maybe the problem have disappeared. But when I was running my RH9 with a 2.4 kernel, sometimes my connection stops and it was impossible to restart it without unplugging the modem. I always supposed that it was some bad manipulation from my provider during technical intervention that put my modem in a bad state because it happens very randomly and not quite often. The disconnection every 24h have never cause any problem, relaunching pppd always restored the connection with success. What I would like to have, was a soft USB initializer (a software that stop and start an usb device) but I've never been able to find one under linux. I will send more technical details as soon as it will happen again, but I hope it will not ;o) You're welcome, Fred Duncan Sands wrote: that the connexion is down and relaunch pppd and only pppd. Because in the case where the modem is in a bad state, you should likely unplug and replug your modem before the connexion can restart (I don't know if it is a bug of the modem or if it is a bug/feature of USB). (I have a green manta speedtouch modem for info) Can you explain more what this bad state is, and what goes wrong when you are in it? Thanks a lot, Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: R: Re: FC2 silver modem
My speedtouch package should have installed one in the directory /usr/share/speedtouch/ called firmware.bin but it is the one for my green manta modem so maybe you need effectively another one. To make all works, rename it firmware.bin and move it in place of mine. Regards, Fred Maurizio Rosetti wrote: Looking around on the web I've concluded that I need a file like KQD6P2.eni. I'm I right ? In which directory will I put it ? Thanks, Maurizio Rosetti -Messaggio originale- Da: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] conto di Duncan Sands Inviato: venerdì 4 giugno 2004 12.55 A: [EMAIL PROTECTED]; Maurizio Rosetti Cc: RUAUDEL Frédéric Oggetto: [speedtouch] Re: R: Re: FC2 silver modem Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable This means that the firmware has not been loaded into the modem. Ciao, Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: R: Re: R: FC2 Silver modem
Hi, maurizio, I've just notice a bug in my adsl init script. In fact this script do nothing because of a test at the begining of the file [ -f /usr/lib/speedtouch/firmware.bin ] || exit 0 you should replace it by [ -f /usr/share/speedtouch/firmware.bin ] || exit 0 It came from my old config that placed the firmware in /usr/lib instead of /usr/share. Maybe it can help :-/ I'm really sorry if the problem come from here ! I will try to fix my RPMS quickly Have a nice day, Fred Maurizio Rosetti wrote: Hello Andrew and all, Do you have usbfs /proc/bus/usb usbfs defaults 0 0 in /etc/fstab ? modem_run can't load the firmware if the USB isn't mounted Yours, Andrew Benton I've added the line to /etc/fstab, rebooted, yet the firmware still doesn't get loaded. I've also noticed that check_adsl.sh gives the same message before and after the command service adsl start : Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable Regards, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: R: Re: R: Re: R: FC2 Silver modem
The new RPMS are ready : speedtouch-1.2-2.GrumZ.(i386|src).rpm BTW, is the new driver version 1.3 is a new version of modem_run or of the user-space drivers ? As my packages use the driver present in the kernel, is it necessary that I upgrade them with this new version or not ? thanks in advance, Best regards, Fred RUAUDEL Frédéric wrote: Hi, maurizio, I've just notice a bug in my adsl init script. In fact this script do nothing because of a test at the begining of the file [ -f /usr/lib/speedtouch/firmware.bin ] || exit 0 you should replace it by [ -f /usr/share/speedtouch/firmware.bin ] || exit 0 It came from my old config that placed the firmware in /usr/lib instead of /usr/share. Maybe it can help :-/ I'm really sorry if the problem come from here ! I will try to fix my RPMS quickly Have a nice day, Fred Maurizio Rosetti wrote: Hello Andrew and all, Do you have usbfs /proc/bus/usb usbfs defaults 0 0 in /etc/fstab ? modem_run can't load the firmware if the USB isn't mounted Yours, Andrew Benton I've added the line to /etc/fstab, rebooted, yet the firmware still doesn't get loaded. I've also noticed that check_adsl.sh gives the same message before and after the command service adsl start : Plugin pppoatm.so loaded. PPPoATM plugin_init PPPoATM setdevname - remove unwanted options PPPoATM setdevname_pppoatm - SUCCESS:8.35 connect(8.35): Resource temporarily unavailable Regards, Maurizio Rosetti Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: New driver version 1.3: ANNOUNCEMENT + New FC2
Hi all, Following some problems with my ADSL connection, I installed the new drivers 1.3 on my FC2. I found a great improvement with this version, so thanks Benoit ! :) After that, I updated my RPM of speedtouch to version 1.3 and take advantage of the new improvements. * Sun Jun 20 2004 Frederic RUAUDEL [EMAIL PROTECTED] 1.3-2.GrumZ - Patch the speedtouch-start script to clean the mutex created by modem_run and to skip running modem_run if the firmware is already loaded - Patch the location of pppd pid in speedtouch-stop - Remove the startadsl.sh script - Modify the adsl init script to use speedtouch-start/speedtouch-stop - Add the configuration file speedtouch.conf with the good values - Remove the creation of /etc/speedtouch.conf in %post section - Modify the configure line in the %build section to set the good default path to avoid having the buildroot set in the speedtouch-(start|stop) script As you can see, I've had to patch the start/stop script to make it works smoothly on my FC2. Here are the details : 1) speedtouch_clean_mutex.patch This patch fix a problem with the new mutex system of modem_run. When you stop modem_run, the mutex is not cleaned so when you try to start it up again, modem_run just print in /var/log/messages : modem_run version 1.3 started by root uid 0 and then stop without any clue ! After looking at the code I found that it was the mutex deadbeef ;-) So I had an ipcrm in the speedtouch-start script but this is a dirty hack and I think, if this is a bug and not a feature, that benoit will certainly find a better solution :) 2) speedtouch_check_firmware_load.patch this patch check the state of the ADSL line present in the file /proc/net/atm/speedtch*, and if the line is reported up and the firmware loaded, it skip the launch of modem_run and directly launch pppd instead of failing the load of the firmware and quit. 3) speedtouch_fix_pppd_pid.patch the last one is probably FC2 specific or maybe a missing configuration in my pppd package, but my pppd put its PID in /var/run/ppp0.pid and not in /var/run/ppp-${PPPD_PEER}.pid. So I made this patch to make it work with my current RPMS. Feel free to tell me where I'm wrong, if I am. For other changes, I remove my startadsl.sh script and use the speedtouch-(start|stop) instead and generate a good default speedtouch.conf for the firmware that I provide with my package. The hotplug support works very well for me, another great feature added in 1.3 (I know it's not new, but I never manage to configure it manually ;). And I added a friendly interface to my RPMs repository with a summary of the things to do to installed my RPMS : http://grumz.dyndns.org/ADSL_FC2 Comments and feedback are welcome ! Have a nice day, Fred Benoit PAPILLAULT wrote: = PLEASE, read the file INSTALL or INSTALL.fr in the package to know how to install it. It is VERY different from previous release (and hopefully a lot easier). == A i586 rpm package and source package are now available. Those packages have been compiled on a Mandrake 10.0 system with a Pentium II processor. They are available on the Sourceforge Project Filelist: http://sourceforge.net/project/showfiles.php?group_id=32758 I'd like to have reports from Mandrake users (and other RPM based distro) about their success (failure?) to use it. Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Attached file included as plaintext by Listar -- -- File: speedtouch_fix_pppd_pid.patch diff -ru speedtouch-1.3/src/speedtouch-stop.in speedtouch.new2/src/speedtouch-stop.in --- speedtouch-1.3/src/speedtouch-stop.in 2004-06-10 18:36:35.0 +0200 +++ speedtouch.new2/src/speedtouch-stop.in 2004-06-20 13:04:42.241448448 +0200 @@ -32,8 +32,10 @@ fi -PID=`head -1 /var/run/ppp-${PPPD_PEER}.pid` -kill -TERM $PID +if [ -f /var/run/ppp0.pid ]; then +PID=`head -1 /var/run/ppp0.pid` +kill -TERM $PID +fi # like we said in speedtouch-start, we don't ever kill modem_run # killall modem_run -- Attached file included as plaintext by Listar -- -- File: speedtouch_clean_mutex.patch diff -ru speedtouch-1.3/src/speedtouch-start.in speedtouch-1.3.new/src/speedtouch-start.in --- speedtouch-1.3/src/speedtouch-start.in 2004-06-10 18:36:35.0 +0200 +++ speedtouch-1.3.new/src/speedtouch-start.in 2004-06-20 12:30:16.679461600 +0200 @@ -18,6 +18,12 @@ exit -1 fi +# cleaning the mutex +ipcs -a | grep 0xdeadbeef /dev/null 21 +if [ $? = 0 ]; then + ipcrm -S 0xdeadbeef +fi + echo Starting ADSL connection... # load usbcore if needed -- Attached file included as plaintext by Listar -- -- File: speedtouch_check_firmware_load.patch diff -ru speedtouch-1.3.new/src/speedtouch-start.in
[speedtouch] Re: New driver version 1.3: ANNOUNCEMENT + New FC2
Thanks for your feedback. Benoit PAPILLAULT wrote: Hi Frédéric! RUAUDEL Frédéric a écrit : *snip* 1) speedtouch_clean_mutex.patch This patch fix a problem with the new mutex system of modem_run. When you stop modem_run, the mutex is not cleaned so when you try to start it up again, modem_run just print in /var/log/messages : You undo my change in a way. The mutex is designed to be kept in memory forever (you can remove it if the modem is unplugged, but this currently lead to some race conditions, so it's never removed). If you remove it, speedtouch-start will not work properly (if your stop the connection with speedtouch-stop and start it again using speedtouch-start, the mutex prevents modem_run from loading the firmware again). So, it's a feature ;-) Maybe it could be helpful to had a message indicating that modem_run found that the firmware was already loaded and skip its work. After reflexion, I maybe found this solution following a false problem, because my first RPM have replaced my peer file so my login wasn't set and the connection failed. As I didn't notice that first, maybe I was disturbed by this behavior. If I have time, I will try to investigate on this problem to see if it was a false issue or not. But my solution works thanks to the redundant patch :) modem_run version 1.3 started by root uid 0 and then stop without any clue ! After looking at the code I found that it was the mutex deadbeef ;-) So I had an ipcrm in the speedtouch-start script but this is a dirty hack and I think, if this is a bug and not a feature, that benoit will certainly find a better solution :) What is important is the exit code from modem_run, 0 indicates that the line is OK and -1 indicates that there is some problem. 2) speedtouch_check_firmware_load.patch this patch check the state of the ADSL line present in the file /proc/net/atm/speedtch*, and if the line is reported up and the firmware loaded, it skip the launch of modem_run and directly launch pppd instead of failing the load of the firmware and quit. Redundant with the modem_run's mutex. 3) speedtouch_fix_pppd_pid.patch the last one is probably FC2 specific or maybe a missing configuration in my pppd package, but my pppd put its PID in /var/run/ppp0.pid and not in /var/run/ppp-${PPPD_PEER}.pid. So I made this patch to make it work with my current RPMS. Feel free to tell me where I'm wrong, if I am. Two pid files are generated by pppd: /var/run/pppN.pid /var/run/ppp-${PPPD_PEER}.pid [only if you use the link option in your peer file). The later is easier to locate if you have multiple PPP connections at the same time. I didn't know this link option that's why I made this patch, but I was conscious of the problem with multiple PPP connections. So you just had to put 'link' alone on a new line in the peer file to make it works ? If its the case I will fix my RPM ASAP. *snip* Benoit PAPILLAULT Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: New driver version 1.3: ANNOUNCEMENT + New FC2
*snip* This is linkname myname It will create /var/run/ppp-myname.pid Ok thanks ! I will fix this in my RPM and discard the patch Gilles Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PPPoE and FC2
Hi Tiago ! Tiago Cogumbreiro wrote: snip A little out of subject note to Ruaudel, have you ever tried running NVidia drivers with the kernel you built? I have and surprisingly it freezes when the server starts, any ideas on why this is happening? I've been browsing google on why the _bundled_ kernel does not work, and that's because of 4KSTACK enabled in the kernel. Did you enable it in your kernel? Sorry but as I have a matrox G400, so I didn't notice any problem with nvidia. If this option is really enabled, so it should be the case in the original kernel too, because I retrieved the FC2 kernel options before only adding those necessary for a PPPoA speedtouch modem. All this to say that I believe I did it like this but maybe I added this option unintentionally. Thank you developers for your great work on speedtouch drivers and thank you Ruaudel for your RPM's :) You're welcome ;) Have a nice day, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PPPoE and FC2
Tiago Cogumbreiro wrote: snip Yes it is on the original kernel, nvidia users are having troubles with FC2. But the problem is on nvidia's side. As soon as i have some spare time i'll try to rebuild the kernel and send you the spec, if you want. Absolutely, if it can help more people, it is always welcome ! Are you interested in bundling br2684ctl in your RPM's list? I can create an RPM with it. Personaly I don't need pppoe but as I said above, I'm always interrested in sharing useful stuff. And it is always better to centralize the work. If you do it, please send me what users have to do to make it work (which RPM needed for pppoe modem and which configuration they have to do after the installation) so I can update the little documentation on my webpage for pppoe users. Best regards, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PPPoE and FC2
One more thing, I don't know if you have already rebuilt a RedHat/FC kernel, but if you don't, I can give you this advice to make you win some time. In order to have a working kernel, you have to set the architecture you need. By default, on intel platform, the arch is i386 and in the default spec, the rpmbuild program compile nothing, so you have to use the following command to set the good arch (eg: i686) : rpmbuild -ba --target=i686 kernel-2.6.spec If you need more advice on this, feel free to ask me, because I had lots of problem to manage to build it correctly so if I can share my experience, I will be glad to. good luck, Fred RUAUDEL Frédéric wrote: Tiago Cogumbreiro wrote: snip Yes it is on the original kernel, nvidia users are having troubles with FC2. But the problem is on nvidia's side. As soon as i have some spare time i'll try to rebuild the kernel and send you the spec, if you want. Absolutely, if it can help more people, it is always welcome ! Are you interested in bundling br2684ctl in your RPM's list? I can create an RPM with it. Personaly I don't need pppoe but as I said above, I'm always interrested in sharing useful stuff. And it is always better to centralize the work. If you do it, please send me what users have to do to make it work (which RPM needed for pppoe modem and which configuration they have to do after the installation) so I can update the little documentation on my webpage for pppoe users. Best regards, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Connection speed questions
Hi folks, I would like to have some details regarding the ADSL line speed. When I start my connection, modem_run give me this log after loading the firmware : modem_run[26470]: ADSL line is up (608 kbit/s down | 160 kbit/s up) So my questions are : - Are they reliable values ? (I mean are they calculated values or it is something negociated with the other end) - Is anybody here have other values (espacially somebody with a 1024k connection) ? It's because I had a 512k line and I switched last week to a 1024k one and these values didn't change since then despite the fact that my provider said to me it was okay. So I would like to know if I can make some reclamations to my provider based on these values. thanks in advance for your help ! have a nice day, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Connection speed questions
Hi, Ok Overbeek (mz) wrote: Hi Frédéric! The speed you get reported is the result of a negotiation between your modem and the ISP-side. If they say that the speed is 1024 kbit/s downwards, you would expect to see that as the result of modem_run (which version are you using?). the last one 1.3 Search the mail-archive with the string 'kbit/s' to see a lot of different speeds... good idea :-) What does Windows (yack!) report as the connect-speed? Did you already compare? No, but I will try Bye Ok thanks Fred RUAUDEL Frédéric wrote: Hi folks, I would like to have some details regarding the ADSL line speed. When I start my connection, modem_run give me this log after loading the firmware : modem_run[26470]: ADSL line is up (608 kbit/s down | 160 kbit/s up) So my questions are : - Are they reliable values ? (I mean are they calculated values or it is something negociated with the other end) - Is anybody here have other values (espacially somebody with a 1024k connection) ? It's because I had a 512k line and I switched last week to a 1024k one and these values didn't change since then despite the fact that my provider said to me it was okay. So I would like to know if I can make some reclamations to my provider based on these values. thanks in advance for your help ! have a nice day, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Connection speed questions
Ok, thanks for all your anwser. Have a nice day, Fred George Miliotis (Corfiot) wrote: RUAUDEL Frédéric wrote: Hi folks, I would like to have some details regarding the ADSL line speed. When I start my connection, modem_run give me this log after loading the firmware : modem_run[26470]: ADSL line is up (608 kbit/s down | 160 kbit/s up) So my questions are : - Are they reliable values ? (I mean are they calculated values or it is something negociated with the other end) - Is anybody here have other values (espacially somebody with a 1024k connection) ? modem_run[10549]: ADSL line is up (1152 kbit/s down | 288 kbit/s up) for 1024/256kbit connection. If you just got upgraded maybe you may need to unplug yourself and plug yourself back in? --G Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] PPPoE support on FC2 and kernel for NVidia users
Hi all, Thanks to Tiago Cogumbreiro, I've just added on my webpage (http://grumz.dyndns.org/ADSL_FC2) the RPMs for FC2 to support PPPoE modem and fix the problem with NVidia cards (8k stacks problem). Best regards, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Alcatel Speedtouch USB 330 + usermode kerneldr
ok, so it is a good news for you. Maybe you just need a pppd daemon with pppoatm support. Try to download the package pppd and linux-atm from my web page, maybe it will solve your problem. Hope it will help, Regards, Fred Jorge -Educanet- wrote: Hello RUAUDEL, Thursday, August 5, 2004, 2:53:48 PM, you wrote: RF The default Fedora Kernel doesn't have support for neither speedtouch RF modem nor ATM and PPPoATM as far as I know. I don't agree with this, please see the config in ATM [EMAIL PROTECTED] root]# cat /boot/config-2.6.7-1.494.2.2 | grep ATM CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set # ATM drivers CONFIG_ATM_TCP=m CONFIG_ATM_LANAI=m CONFIG_ATM_ENI=m CONFIG_PPPOATM=m several options omited. RF I made some RPMs to deal with this problem, but the kernel I made is RF based on the original Fedora kernel which is a bit older than yours. RF Here is the address : RF http://grumz.dyndns.org/ADSL_FC2 RF But if you want your version of the kernel, you will need to recompile RF the kernel manually and eventually apply some usb patch if they haven't RF been applied in the official kernel since I made mine. For the patch RF problem, Duncan will be the best person to answer I think. OK, but in the ADSL USB usermode driver the ATM support is in the userspace tools. Is necesary the ATM support in the kernel? I think that the ATM support is in the pppoa3 file Please read this in the FAQ: General === 0.0 I'm confused - there seem to be several speedtouch drivers, which one is this? There are two USB Speedtouch drivers available for Linux. For the sake of argument we shall call the user-mode and kernel-mode. This package and documentation refers to the user-mode version which is not related to the kernel-mode drivers in any way (except we use the managment code to provide the microcode for the modem). [...] The user-mode driver terminates the USB device in user-space and demangles the ATM into normal ppp packets for a normal pppd. Although we recommend some kernel options you generally don't need to patch anything. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Alcatel Speedtouch USB 330 + usermode kerneldr
I know that I'm using the kernel version. I made RPMs to simplify the installation of the speedtouch modem on FC2 to allow others not to spend many days trying to get their adsl connexion working like I do. I never configure the user space kernel so I don't know what it is needed. But I just try to help you with the knowledge I have. Sorry If I made you lost your time because I give you bad solution. I thought that my solution can give you some clues to make your config works but It seems that I was wrong. Sorry about that. I hope somebody else can help you because finally it seems that I can't. Good luck, Regards, Fred Jorge -Educanet- wrote: Hello RUAUDEL, Thursday, August 5, 2004, 2:53:48 PM, you wrote: RF I made some RPMs to deal with this problem, but the kernel I made is RF based on the original Fedora kernel which is a bit older than yours. RF Here is the address : RF http://grumz.dyndns.org/ADSL_FC2 I have been seen, your rmps. You are using the kernel version of the speedtouch driver if you see the file: etc/ppp/peers/speedtch lcp-echo-interval 10 lcp-echo-failure 3 noipdefault defaultroute user username noauth noaccomp nopcomp noccp novj holdoff 4 persist maxfail 25 updetach usepeerdns plugin pppoatm.so 8.35 The part: plugin pppoatm.so 8.35 is for the kernel version of the driver. The file /usr/lib/pppd/2.4.2b3/pppoatm.so is for the kernel version of the driver. Remenber that exist two versions of the driver: Usermode:http://speedtouch.sourceforge.net/ Kernelmode: http://linux-usb.sourceforge.net/SpeedTouch/ Please run: lsmod on your machine and see the column Used by if you have a 1 your are using the kernel version Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Announcement: GNOME PPX
I will try to find the time to test it as soon as possible for PPPoA support. I will keep you inform. If it works well, maybe I will add the rpms to my repository. Have a nice day Fred Tiago Cogumbreiro wrote: I would also like to add the I am in a great need for beta testers, especially for pppoa users. I have a pppoe connection and it works flawlessly but as for pppoa i only did what was written in the docs. Please help me out :) Thank you all, Tiago On Wed, 2004-08-11 at 18:06, Tiago Cogumbreiro wrote: To whom it may concern ;) I have created an easy to use frontend to pppd and PPPoE/PPPoA connections. The project name is gnome-ppx and it's website is: http://s1x.homelinux.net/projects/gnome-ppx Take care, Tiago Cogumbreiro Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Announcement: GNOME PPX
Yes I saw your rpms. To preserve config file with rpms, you must set them with the %config(noreplace) directive in the %files section : %config(noreplace) /etc/ppp/peers/pppoa With this directive, if the file already exists, the new file is installed as for example /etc/ppp/peers/pppoa.rpmnew Regards, Fred Tiago Cogumbreiro wrote: I have rpms and src.rpms in my website so you don't need to package this one :) The installation will replace /etc/ppp/peers/pppoa so please backup your account file if it's the same name. I don't really know how to make rpm create a backup with this type of files. Note: Currently the pppoa dialer only works with the pppoatm.so plugin. Thank you for your time. On Thu, 2004-08-12 at 07:28, RUAUDEL Frdric wrote: I will try to find the time to test it as soon as possible for PPPoA support. I will keep you inform. If it works well, maybe I will add the rpms to my repository. Have a nice day Fred Tiago Cogumbreiro wrote: I would also like to add the I am in a great need for beta testers, especially for pppoa users. I have a pppoe connection and it works flawlessly but as for pppoa i only did what was written in the docs. Please help me out :) Thank you all, Tiago On Wed, 2004-08-11 at 18:06, Tiago Cogumbreiro wrote: To whom it may concern ;) I have created an easy to use frontend to pppd and PPPoE/PPPoA connections. The project name is gnome-ppx and it's website is: http://s1x.homelinux.net/projects/gnome-ppx Take care, Tiago Cogumbreiro Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Announcement: GNOME PPX
Hi tiago, Finally, I had time last night to test your gnome-ppx app. Unfortunately, it didn't work. Here are the errors pppd send to the system logs : -- Aug 12 23:46:12 grumz pppd[16370]: Plugin passprompt.so loaded. Aug 12 23:46:12 grumz pppd[16370]: unrecognized option '8.35' -- then I have this error dialog message : -- Error trying to start connection. -- It seems that you don't use the vci.vpi parameter correctly with pppoa. After setting it in the dialog, I didn't see it in the peer file. Tell me if I'm wrong, but it seems to me that it should go on a blank line at the end of the peer file (/etc/ppp/peer/pppoa). lcp-echo-interval 10 user username [...] usepeerdns plugin pppoatm.so 8.35 - Sorry, but I didn't have time to look in the code to find where the problem could come from exactly. I will try to find the time to do it. Tell me when you will have a new version. Have a nice day, Fred Tiago Cogumbreiro wrote: Thank you very much, it will be included in the next version of gnome-ppx, it will probably be released tonight. On Thu, 2004-08-12 at 11:31, RUAUDEL Frdric wrote: Yes I saw your rpms. To preserve config file with rpms, you must set them with the %config(noreplace) directive in the %files section : %config(noreplace) /etc/ppp/peers/pppoa With this directive, if the file already exists, the new file is installed as for example /etc/ppp/peers/pppoa.rpmnew Regards, Fred Tiago Cogumbreiro wrote: I have rpms and src.rpms in my website so you don't need to package this one :) The installation will replace /etc/ppp/peers/pppoa so please backup your account file if it's the same name. I don't really know how to make rpm create a backup with this type of files. Note: Currently the pppoa dialer only works with the pppoatm.so plugin. Thank you for your time. On Thu, 2004-08-12 at 07:28, RUAUDEL Frdric wrote: I will try to find the time to test it as soon as possible for PPPoA support. I will keep you inform. If it works well, maybe I will add the rpms to my repository. Have a nice day Fred Tiago Cogumbreiro wrote: I would also like to add the I am in a great need for beta testers, especially for pppoa users. I have a pppoe connection and it works flawlessly but as for pppoa i only did what was written in the docs. Please help me out :) Thank you all, Tiago On Wed, 2004-08-11 at 18:06, Tiago Cogumbreiro wrote: To whom it may concern ;) I have created an easy to use frontend to pppd and PPPoE/PPPoA connections. The project name is gnome-ppx and it's website is: http://s1x.homelinux.net/projects/gnome-ppx Take care, Tiago Cogumbreiro Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Liste de diffusion modem ALCATEL SpeedTouch USB Pour se dsinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PLS. HELP!
Try my RPMS : http://grumz.dyndns.org/ADSL_FC2 mario wrote: Hello, I have been fighting with speedtouch and linux for the past four days, without success :-( Please, help me! I tried to follow the instruction at http://benoit.papillault.free.fr/speedtouch/user.en.php3 The best I get is: [ root]# pppd call adsl updetach using channel 2 Using interface ppp0 Connect: ppp0 -- /dev/pts/7 sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] . sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] LCP: timeout sending Config-Requests -- There is something wrong, I guess, with my installation/distro, since [ root]# modprobe usbcore FATAL: Module usbcore not found. I am on Fedora Core2, Linux 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 i386 GNU/Linux Also, it seems that dsmeg is alerting me on something, aa it outputs: PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 divert: not allocating divert_blk for non-ethernet device ppp1 . Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 PPP Deflate Compression module registered -- Also, the alcatel modem seems to be seen, since [EMAIL PROTECTED] root]# cat /proc/bus/usb/devices .. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D041AB57 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms A problem with the driver (i took that one from Windows)? . Is anybody over there able to give me some good hint? Thanks a lot Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PLS. HELP!
Sorry my ADSL connection seems to be out of service. I hope it will be available again tomorow morning. Fred RUAUDEL Frédéric wrote: Try my RPMS : http://grumz.dyndns.org/ADSL_FC2 mario wrote: Hello, I have been fighting with speedtouch and linux for the past four days, without success :-( Please, help me! I tried to follow the instruction at http://benoit.papillault.free.fr/speedtouch/user.en.php3 The best I get is: [ root]# pppd call adsl updetach using channel 2 Using interface ppp0 Connect: ppp0 -- /dev/pts/7 sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] . sent [LCP ConfReq id=0x1 asyncmap 0x0 magic 0xf0a2f842] LCP: timeout sending Config-Requests -- There is something wrong, I guess, with my installation/distro, since [ root]# modprobe usbcore FATAL: Module usbcore not found. I am on Fedora Core2, Linux 2.6.5-1.358smp #1 SMP Sat May 8 09:25:36 EDT 2004 i686 i686 i386 GNU/Linux Also, it seems that dsmeg is alerting me on something, aa it outputs: PPP generic driver version 2.4.2 divert: not allocating divert_blk for non-ethernet device ppp0 HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 usb 2-1: bulk timeout on ep7out usbfs: USBDEVFS_BULK failed dev 2 ep 0x7 len 53 ret -110 divert: not allocating divert_blk for non-ethernet device ppp1 . Badness in local_bh_enable at kernel/softirq.c:136 Call Trace: [02121d8e] local_bh_enable+0x39/0x5c ... divert: no divert_blk to free, ppp0 not ethernet divert: not allocating divert_blk for non-ethernet device ppp0 PPP Deflate Compression module registered -- Also, the alcatel modem seems to be seen, since [EMAIL PROTECTED] root]# cat /proc/bus/usb/devices .. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 0.00 S: Manufacturer=ALCATEL S: Product=Speed Touch USB S: SerialNumber=0090D041AB57 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms A problem with the driver (i took that one from Windows)? . Is anybody over there able to give me some good hint? Thanks a lot Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: PLS. HELP!
It is quite strange, because if it is really what garry said, it means that you shouldn't have been able to boot with the default fedora kernel (I use exactly the same config with only some options *added* for the need of the speedtouch modem). What is the filesystem of your root partition (ext2, ext3, reiserFS, xfs...) you should have this information in the file /etc/fstab. If you have a NVidia card, try the kernel-2.6.6-1.427.8kstacks_st.i686.rpm that have a special patch for it, maybe it can fix the problem. Last thing is to verify that your /boot/grub/grub.conf file is configured to boot on the good primary partition. If all these don't work, you maybe will have to compile the kernel to adapt it to your config but it shouldn't be necessary. good luck, Fred Garry Atkins-Coolman wrote: On Aug 20 mario writ wiv much luv: hi Frédéric I rpm -ivvh your kernel+atm+ppp+speedtouch packages. This is the situation. when I log in the old kernel (from Grub2) [xxx root]# pppd call speedtch pppd: /usr/lib/./pppd/2.4.2/pppoatm.so: cannot open shared object file: No such file or directory pppd: Couldn't load plugin pppoatm.so If I try to log in the new kernel2.6.5.2Grunz; I get the following -- kernel panic: unable to mount root fs on unknown block (00) You need to include your file system when rebuilding your kernel, i had the same problem. But i can not remember how i did it! If you google for it (as it's a common newbie linux problem) there will be some help pages about! Gaz Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedtouch FC2
Hi Nigel, For the modified kernel on http://grumz.dyndns.org/ADSL_FC2, here are the changes I have done to make it works with the speedtouch modem : - apply patches to fix some usb bugs (have they been integrated to the last kernel ??) - add some options that are not present in the default FC2 kernel : - Device drivers-Networking Support-Networking options-Asynchronous Transfer Mode (ATM) : build as module - Then also select RFC1483/2684 Bridged Protocols: build as module and switch off Per VC IP filter kludge - Device Drivers-Networking Support-Network Device Support-PPP Support-PPP over ATM: build as module - Device Drivers-USB Support-Alcatel Speedtouch USB Support: build as module the patches are in the source RPM available on my site above. this RPM is based on the default kernel of FC2 For my part, I have the kernel driver working with the RPMs of my site. But the kernel is a bit old now, and I didn't find the time until now to try to build a newer one. Best regards, Fred Nigel Jones wrote: Apologies if this has been seen before - didn't see it in the archives, possibly as I emailed from an unregistered address Hi,I have Fedora Core 1 installed, with kernel 2.4.22-1.2188.nptl. I am using the KERNEL driver which gives me latency of 16-18 ms, with the pppoatm.so plugin. pppd is 2.4.1 - I remember having a somewhat hard time locating a fully working version of this plugin. I have the original frog modem. I then decided it was time to upgrade to FC2, so I installed the gold code, and got the speedtouch user-space driver working using speedtouch-1.3-2.i586.rpm from http://sourceforge.net/project/showfiles.php?group_id=32758package_id=28264 after just downloading the microcode from thomson. However I then downloaded kernel kernel-2.6.8-1.521.i586.rpm, and the modem no longer loaded firmware (amber light still on). I saw this referred to in http://www.4p8.com/eric.brasseur/fc2_speedtouch_usb.html but did not see a real explanation.I also noticed the user space driver latency was higher, so would like to stick to the kernel driver, so now some questions: * I also saw other RPMs at http://grumz.dyndns.org/ADSL_FC2, including a modified kernel - what kernel options were changed? * The kernel driver page at http://linux-usb.sourceforge.net/SpeedTouch/ hasn't anything new for a year - is this still the right starting point (speedbundle 1.0) - but if so does it clash with FC2? * What is it about 2.6.8-1.521 etc in FC2 updates that is preventing the user-space driver from working? * Does anyone have the kernel driver working under FC2 - and if so which pppoatm plugin (lots around) +pppd to use with FC2 * What is recommended currently - user or kernel? Thanks, Nigel Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: Speedbundle under Fedora Core 3
Hi Aad, Aad Rijnberg wrote: Hello, I have been trying to get the SpeedTouch 330 operational under Fedora Core 3. In the end I succeeded, and want to give some feedback on problems I encountered so that others can benefit from it. Some time ago I read in this list that it was needed to copy the atm header files that belong to the used kernel from /usr/src/linux-some-version/include/linux to /usr/include/linux. Therefore I downloaded the source code of the kernel that came with FC3, and installed it. It appeared to end up in /usr/src/redhat/SOURCES. I untarred linux-2.6.9.tar.bz2 such that the kernel source tree ended up in /usr/src/linux-2.6.9. Then I copied the /usr/src/linux-2.6.9/include/linux/atm*.h files to /usr/include/linux. Concerning the headers problem, I found later that the includes of the current kernel are located in the directory /lib/modules/kernel-version/build/include/linux/ in the fedora distribs. So you just have to make your ATM makefile point to the folder instead of the default one (/usr/include/linux). Following a Linus Torvald's directive, the header present in the /usr/include/linux are those used to compile the glibc present in the system, IIRC. More info here : http://lists.debian.org/debian-user/1997/02/msg00686.html Regards, Fred Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: speedtouch and FC4
Hello hicham, You need to apply this patch to the source : 8--- cut here 8--- diff -ru speedtouch-1.3/src/modem_run.c speedtouch-1.3.new/src/modem_run.c --- speedtouch-1.3/src/modem_run.c 2004-06-10 18:36:35.0 +0200 +++ speedtouch-1.3.new/src/modem_run.c 2005-06-13 23:26:38.0 +0200 @@ -91,7 +91,7 @@ * Global variables **/ -static int verbose = 0; +int verbose = 0; FILE *flog = NULL; /* 8--- cut here 8--- hicham wrote: Hello I've tried the speedtouchconf script ( the 6 mars 05 version and the betas versions as well ) in Fedora core 4 I get the following error : cd src make make[1]: Entering directory `/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\1.3\ -c firmware.c gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\1.3\ -D_REENTRANT -D_THREAD_SAFE -o pusb.o -c pusb-linux.c gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DUSE_SYSLOG -DVERSION=\1.3\ -c modem_run.c modem_run.c:84: error: static declaration of ‘verbose’ follows non-static declaration modem.h:42: error: previous declaration of ‘verbose’ was here modem_run.c: In function ‘get_reference’: modem_run.c:691: warning: pointer targets in passing argument 6 of ‘pusb_control_msg’ differ in signedness modem_run.c: In function ‘report’: modem_run.c:1119: warning: pointer targets in passing argument 1 of ‘dump’ differ in signedness modem_run.c: In function ‘dump’: modem_run.c:1180: warning: pointer targets in passing argument 1 of ‘sprintf’ differ in signedness modem_run.c:1189: warning: pointer targets in passing argument 1 of ‘sprintf’ differ in signedness modem_run.c:1198: warning: pointer targets in passing argument 1 of ‘sprintf’ differ in signedness modem_run.c:1207: warning: pointer targets in passing argument 2 of ‘syslog’ differ in signedness make[1]: *** [modem_run.o] Error 1 make[1]: Leaving directory `/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' make: *** [modem] Error 2 Thanks for your help hicham Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: speedtouch and FC4
you copy the content text between the dash line (-8-) in a file name for example fix.patch, then you go in the root dir of the source and you use the command : patch -p1 /path/to/fix.patch that's it. Or more simply, you can edit the file speedtouch-1.3/src/modem_run.c and remove the word static near line 91. I don't know if the official speedtouch dev team agree with this patch but my modem_run program works well for 2 weeks now with this patch applied... Regards, Fred Richard Connon wrote: I understand I am going back a while in the discussion but how exactly would I go about applying 'this patch' to the source? RUAUDEL Frédéric wrote: Hello hicham, You need to apply this patch to the source : 8--- cut here 8--- diff -ru speedtouch-1.3/src/modem_run.c speedtouch-1.3.new/src/modem_run.c --- speedtouch-1.3/src/modem_run.c 2004-06-10 18:36:35.0 +0200 +++ speedtouch-1.3.new/src/modem_run.c 2005-06-13 23:26:38.0 +0200 @@ -91,7 +91,7 @@ * Global variables **/ -static int verbose = 0; +int verbose = 0; FILE *flog = NULL; /* 8--- cut here 8--- hicham wrote: Hello I've tried the speedtouchconf script ( the 6 mars 05 version and the betas versions as well ) in Fedora core 4 I get the following error : cd src make make[1]: Entering directory `/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\1.3\ -c firmware.c gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DVERSION=\1.3\ -D_REENTRANT -D_THREAD_SAFE -o pusb.o -c pusb-linux.c gcc -Wall -I. -I/usr/local/include -I/usr/include -O2 -DUSE_SYSLOG -DVERSION=\1.3\ -c modem_run.c modem_run.c:84: error: static declaration of ‘verbose’ follows non-static declaration modem.h:42: error: previous declaration of ‘verbose’ was here modem_run.c: In function ‘get_reference’: modem_run.c:691: warning: pointer targets in passing argument 6 of ‘pusb_control_msg’ differ in signedness modem_run.c: In function ‘report’: modem_run.c:1119: warning: pointer targets in passing argument 1 of ‘dump’ differ in signedness modem_run.c: In function ‘dump’: modem_run.c:1180: warning: pointer targets in passing argument 1 of ‘sprintf’ differ in signedness modem_run.c:1189: warning: pointer targets in passing argument 1 of ‘sprintf’ differ in signedness modem_run.c:1198: warning: pointer targets in passing argument 1 of ‘sprintf’ differ in signedness modem_run.c:1207: warning: pointer targets in passing argument 2 of ‘syslog’ differ in signedness make[1]: *** [modem_run.o] Error 1 make[1]: Leaving directory `/root/speedtouch/speedtouchconf-25b-02-2005/speedtouch-1.3-sgp/src' make: *** [modem] Error 2 Thanks for your help hicham Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]
[speedtouch] Re: RES: Re: RES: Re: RES: Re: speedtouch and FC4
Hi Herva, Maybe you could give a try to gnome-ppx at http://gnome-ppx.berlios.de/download/. This is a GUI frontend to speedtouch that worked well with FC2 and if I remember correctly take care of all the configuration steps. But I don't know if this software works with FC4 because it was done for FC2 You can also try to see if there is any interesting clues in this old FC2 page : http://s1x.homelinux.net/documents/fc2_speedtouch Don't get the RPMs because there are too old but the instructions could be interresting and sometime we just miss a little thing that make everything else just doesn't work! Regards, Fred PS: If you need I can send you a RPMs of the speedtouch package for FC4 (I'm not sure if you already have one). If anyone want to host this package feel free to contact me (I don't have enough bandwith to do it myself). Hervandil Sant'Anna wrote: Dear Duncan, Thank you for your further help, but I think I gonna give up with this! I have any familiarity with these stuffs like Kernel compilation, system logs, etc. As you said, it's getting to hard for me. If one day I have enough money, I'll follow other simpler suggestions, which recommended to buy an ethernet modem. I'm sorry, but I think I can't go on! Best regards, Herva --- Duncan Sands [EMAIL PROTECTED] escreveu: Hi Herva, I have just done the step one, because the ADSL line is up was not anywhere in /var/log/messages. is your telephone line plugged into the modem? Did your ISP turn on their equipment down at the exchange? However, the messages: found stage 1 firmware speedtch-1.bin found stage 2 firmware speedtch-2.bin were there, after the message New full speed usb device using ohci_hcd address 4 Please send me your system logs. It would be helpful if you rebuilt your kernel with CONFIG_USB_DEBUG=y, but I understand that that may be too hard. Ciao, D. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] ___ Yahoo! Acesso Grátis - Internet rápida e grátis. Instale o discador agora! http://br.acesso.yahoo.com/ Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED] -- Binary/unsupported file stripped by Listar -- -- Type: text/x-vcard -- File: ruaudel.vcf Liste de diffusion modem ALCATEL SpeedTouch USB Pour se désinscrire : mailto:[EMAIL PROTECTED]